! Started logfile: /scr/pima/rv117_uvs/J1310+3220_X_dfm.log on Sat Dec  9 23:43:54 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv117_uvs/J1310+3220_X_uva.fits
! Reading UV FITS file: /scr/pima/rv117_uvs/J1310+3220_X_uva.fits
! AN table 1: 2 integrations on 3 of 3 possible baselines.
! AN table 2: 8 integrations on 3 of 3 possible baselines.
! AN table 3: 10 integrations on 36 of 36 possible baselines.
! AN table 4: 4 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.599156 visibilities/baseline/integration-bin.
! Found source: J1310+3220
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 1136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1310+3220_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 30 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 30 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 30 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 30 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.416009Jy  sigma=20.688561
! Fit after  self-cal, rms=0.148548Jy  sigma=2.111947
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.14 mas, bmaj=1.487 mas, bpa=-67.76 degrees
! Estimated noise=1.75186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.767433 Jy
! Component: 100  -  total flux cleaned = 0.945737 Jy
! Total flux subtracted in 100 components = 0.945737 Jy
! Clean residual min=-0.028199 max=0.068941 Jy/beam
! Clean residual mean=-0.000025 rms=0.006073 Jy/beam
! Combined flux in latest and established models = 0.945737 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.945737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157761Jy  sigma=2.241618
! Fit after  self-cal, rms=0.157655Jy  sigma=2.240698
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0770475 Jy
! Component: 100  -  total flux cleaned = 0.1177 Jy
! Total flux subtracted in 100 components = 0.1177 Jy
! Clean residual min=-0.015782 max=0.019772 Jy/beam
! Clean residual mean=-0.000026 rms=0.003698 Jy/beam
! Combined flux in latest and established models = 1.06344 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 1.06344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104665Jy  sigma=1.448960
! Fit after  self-cal, rms=0.103269Jy  sigma=1.432921
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258858 Jy
! Component: 100  -  total flux cleaned = 0.0400942 Jy
! Total flux subtracted in 100 components = 0.0400942 Jy
! Clean residual min=-0.012987 max=0.015738 Jy/beam
! Clean residual mean=-0.000027 rms=0.003212 Jy/beam
! Combined flux in latest and established models = 1.10353 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 1.10353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095018Jy  sigma=1.308308
! Fit after  self-cal, rms=0.094602Jy  sigma=1.303152
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.365 mas, bmaj=1.717 mas, bpa=-66.11 degrees
! Estimated noise=1.48616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129319 Jy
! Component: 100  -  total flux cleaned = 0.0192815 Jy
! Component: 150  -  total flux cleaned = 0.0210298 Jy
! Component: 200  -  total flux cleaned = 0.021881 Jy
! Total flux subtracted in 200 components = 0.021881 Jy
! Clean residual min=-0.012442 max=0.018467 Jy/beam
! Clean residual mean=-0.000070 rms=0.003640 Jy/beam
! Combined flux in latest and established models = 1.12541 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 1.12541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092854Jy  sigma=1.277515
! Fit after  self-cal, rms=0.092724Jy  sigma=1.275817
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.365 x 1.717 at -66.11 degrees (North through East)
! Clean map  min=-0.012195  max=0.99393 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NY        0.00*    WZ        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.95     NL        1.02     OV        1.00     PT        1.00     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     FD        1.02     KP        0.98     LA        1.05     
!   MK        0.99     OV        0.98     PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NY        0.00*    WZ        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.94     NL        1.01     OV        0.97     PT        1.00     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.02     FD        1.02     KP        1.01     LA        1.05     
!   MK        0.99     OV        0.96     PT        0.99     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NY        0.00*    WZ        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.94     NL        1.02     OV        1.01     PT        1.01     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00     FD        1.03     KP        1.00     LA        1.09     
!   MK        0.98     OV        0.98     PT        0.97     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NY        0.00*    WZ        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.98     
!   LA        0.95     NL        1.03     OV        0.98     PT        0.99     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.02     FD        1.03     KP        0.98     LA        1.08     
!   MK        0.98     OV        0.99     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.092724Jy  sigma=1.275817
! Fit after  self-cal, rms=0.079539Jy  sigma=1.121195
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.349 mas, bmaj=1.781 mas, bpa=-65.63 degrees
! Estimated noise=1.52472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176261 Jy
! Component: 100  -  total flux cleaned = 0.0266651 Jy
! Component: 150  -  total flux cleaned = 0.0292989 Jy
! Component: 200  -  total flux cleaned = 0.0306173 Jy
! Total flux subtracted in 200 components = 0.0306173 Jy
! Clean residual min=-0.010544 max=0.009696 Jy/beam
! Clean residual mean=-0.000204 rms=0.002731 Jy/beam
! Combined flux in latest and established models = 1.15603 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 55 components and 1.15603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074833Jy  sigma=1.067554
! Fit after  self-cal, rms=0.074348Jy  sigma=1.059590
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074348Jy  sigma=1.059590
! Fit after  self-cal, rms=0.070922Jy  sigma=1.004892
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.349 mas, bmaj=1.779 mas, bpa=-66.04 degrees
! Estimated noise=1.52384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00678228 Jy
! Component: 100  -  total flux cleaned = 0.00862672 Jy
! Component: 150  -  total flux cleaned = 0.0101248 Jy
! Component: 200  -  total flux cleaned = 0.0111404 Jy
! Total flux subtracted in 200 components = 0.0111404 Jy
! Clean residual min=-0.009406 max=0.009663 Jy/beam
! Clean residual mean=-0.000029 rms=0.002306 Jy/beam
! Combined flux in latest and established models = 1.16717 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 69 components and 1.16717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069776Jy  sigma=0.992693
! Fit after  self-cal, rms=0.069676Jy  sigma=0.991242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149129 Jy
! Component: 100  -  total flux cleaned = 0.00241467 Jy
! Component: 150  -  total flux cleaned = 0.00292221 Jy
! Component: 200  -  total flux cleaned = 0.00345368 Jy
! Total flux subtracted in 200 components = 0.00345368 Jy
! Clean residual min=-0.009390 max=0.009545 Jy/beam
! Clean residual mean=-0.000035 rms=0.002270 Jy/beam
! Combined flux in latest and established models = 1.17062 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 79 components and 1.17062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069319Jy  sigma=0.986959
! Fit after  self-cal, rms=0.069283Jy  sigma=0.986413
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069283Jy  sigma=0.986413
! Fit after  self-cal, rms=0.057552Jy  sigma=0.813441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.348 mas, bmaj=1.775 mas, bpa=-66.04 degrees
! Estimated noise=1.52391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272445 Jy
! Component: 100  -  total flux cleaned = 0.00293974 Jy
! Component: 150  -  total flux cleaned = 0.00275647 Jy
! Component: 200  -  total flux cleaned = 0.0025925 Jy
! Total flux subtracted in 200 components = 0.0025925 Jy
! Clean residual min=-0.005905 max=0.006959 Jy/beam
! Clean residual mean=0.000070 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 1.17322 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 1.17322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057130Jy  sigma=0.807232
! Fit after  self-cal, rms=0.057092Jy  sigma=0.806602
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0043214 Jy
! Component: 100  -  total flux cleaned = 0.0057154 Jy
! Component: 150  -  total flux cleaned = 0.00594792 Jy
! Component: 200  -  total flux cleaned = 0.00585113 Jy
! Total flux subtracted in 200 components = 0.00585113 Jy
! Clean residual min=-0.005346 max=0.005316 Jy/beam
! Clean residual mean=0.000061 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 1.17907 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 1.17907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056360Jy  sigma=0.794629
! Fit after  self-cal, rms=0.056310Jy  sigma=0.793980
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056310Jy  sigma=0.793980
! Fit after  self-cal, rms=0.056168Jy  sigma=0.791379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.766 mas, bmaj=3.057 mas, bpa=47.72 degrees
! Estimated noise=1.80348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293377 Jy
! Component: 100  -  total flux cleaned = 0.00329067 Jy
! Component: 150  -  total flux cleaned = 0.00337034 Jy
! Component: 200  -  total flux cleaned = 0.00337116 Jy
! Total flux subtracted in 200 components = 0.00337116 Jy
! Clean residual min=-0.005046 max=0.005706 Jy/beam
! Clean residual mean=0.000107 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 1.18244 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 123 components and 1.18244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055966Jy  sigma=0.788051
! Fit after  self-cal, rms=0.055928Jy  sigma=0.787488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000431616 Jy
! Component: 100  -  total flux cleaned = 0.000439985 Jy
! Component: 150  -  total flux cleaned = 0.00038324 Jy
! Component: 200  -  total flux cleaned = 0.000332515 Jy
! Total flux subtracted in 200 components = 0.000332515 Jy
! Clean residual min=-0.004741 max=0.005712 Jy/beam
! Clean residual mean=0.000106 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 1.18277 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 128 components and 1.18277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055875Jy  sigma=0.786397
! Fit after  self-cal, rms=0.055860Jy  sigma=0.786178
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.347 mas, bmaj=1.774 mas, bpa=-65.91 degrees
! Estimated noise=1.52278 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.347 x 1.774 at -65.91 degrees (North through East)
! Clean map  min=-0.0057783  max=0.99315 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055860Jy  sigma=0.786178
! Fit after  self-cal, rms=0.048159Jy  sigma=0.652469
! Inverting map and beam 
! Estimated beam: bmin=1.347 mas, bmaj=1.774 mas, bpa=-65.84 degrees
! Estimated noise=1.52299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000978138 Jy
! Component: 100  -  total flux cleaned = 0.000980484 Jy
! Component: 150  -  total flux cleaned = 0.000982783 Jy
! Component: 200  -  total flux cleaned = 0.000986787 Jy
! Total flux subtracted in 200 components = 0.000986787 Jy
! Clean residual min=-0.004599 max=0.004904 Jy/beam
! Clean residual mean=0.000064 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 1.18376 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 134 components and 1.18376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047905Jy  sigma=0.648216
! Fit after  self-cal, rms=0.047892Jy  sigma=0.648053
! Inverting map 
! Added new window around map position (-4.6, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450865 Jy
! Component: 100  -  total flux cleaned = 0.00521722 Jy
! Component: 150  -  total flux cleaned = 0.00507533 Jy
! Component: 200  -  total flux cleaned = 0.00494183 Jy
! Total flux subtracted in 200 components = 0.00494183 Jy
! Clean residual min=-0.004426 max=0.004466 Jy/beam
! Clean residual mean=0.000057 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 1.1887 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 155 components and 1.1887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047420Jy  sigma=0.640541
! Fit after  self-cal, rms=0.047367Jy  sigma=0.639796
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047367Jy  sigma=0.639796
! Fit after  self-cal, rms=0.047310Jy  sigma=0.638618
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.12 mas, bmaj=1.519 mas, bpa=-66.93 degrees
! Estimated noise=1.77697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.766246 Jy
! Component: 100  -  total flux cleaned = 0.948356 Jy
! Component: 150  -  total flux cleaned = 1.03132 Jy
! Component: 200  -  total flux cleaned = 1.07465 Jy
! Total flux subtracted in 200 components = 1.07465 Jy
! Clean residual min=-0.011732 max=0.021227 Jy/beam
! Clean residual mean=0.000053 rms=0.002600 Jy/beam
! Combined flux in latest and established models = 1.07465 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.07465 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.346 mas, bmaj=1.774 mas, bpa=-65.75 degrees
! Estimated noise=1.52229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0335071 Jy
! Component: 100  -  total flux cleaned = 0.0544552 Jy
! Component: 150  -  total flux cleaned = 0.0691074 Jy
! Component: 200  -  total flux cleaned = 0.0801969 Jy
! Total flux subtracted in 200 components = 0.0801969 Jy
! Clean residual min=-0.006705 max=0.006518 Jy/beam
! Clean residual mean=0.000116 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 1.15485 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 62 components and 1.15485 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.764 mas, bmaj=3.057 mas, bpa=47.5 degrees
! Estimated noise=1.80352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118782 Jy
! Component: 100  -  total flux cleaned = 0.0197205 Jy
! Component: 150  -  total flux cleaned = 0.0248541 Jy
! Component: 200  -  total flux cleaned = 0.027269 Jy
! Total flux subtracted in 200 components = 0.027269 Jy
! Clean residual min=-0.005670 max=0.005445 Jy/beam
! Clean residual mean=0.000136 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 1.18212 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196954 Jy
! Component: 100  -  total flux cleaned = 0.00359332 Jy
! Component: 150  -  total flux cleaned = 0.00466227 Jy
! Component: 200  -  total flux cleaned = 0.00524215 Jy
! Total flux subtracted in 200 components = 0.00524215 Jy
! Clean residual min=-0.004927 max=0.004813 Jy/beam
! Clean residual mean=0.000122 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 1.18736 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 149 components and 1.18736 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.346 mas, bmaj=1.774 mas, bpa=-65.75 degrees
! Estimated noise=1.52229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0008243 Jy
! Component: 100  -  total flux cleaned = 0.00105144 Jy
! Component: 150  -  total flux cleaned = 0.00115394 Jy
! Component: 200  -  total flux cleaned = 0.00124802 Jy
! Total flux subtracted in 200 components = 0.00124802 Jy
! Clean residual min=-0.004444 max=0.004225 Jy/beam
! Clean residual mean=0.000068 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 1.18861 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 169 components and 1.18861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047577Jy  sigma=0.644552
! Fit after  self-cal, rms=0.047418Jy  sigma=0.641953
wmodel J1310+3220_X_map.mod
! Writing 169 model components to file: J1310+3220_X_map.mod
wobs   J1310+3220_X_uvs.fits
! Writing UV FITS file: J1310+3220_X_uvs.fits
wwins  J1310+3220_X_map.win
! wwins: Wrote 5 windows to J1310+3220_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238527 Jy
! Component: 100  -  total flux cleaned = 0.000315052 Jy
! Component: 150  -  total flux cleaned = 0.000242759 Jy
! Component: 200  -  total flux cleaned = 0.00038218 Jy
! Component: 250  -  total flux cleaned = 0.000517434 Jy
! Component: 300  -  total flux cleaned = 0.00104643 Jy
! Component: 350  -  total flux cleaned = 0.00136956 Jy
! Component: 400  -  total flux cleaned = 0.00187717 Jy
! Component: 450  -  total flux cleaned = 0.00237421 Jy
! Component: 500  -  total flux cleaned = 0.002741 Jy
! Component: 550  -  total flux cleaned = 0.00316225 Jy
! Component: 600  -  total flux cleaned = 0.00351817 Jy
! Component: 650  -  total flux cleaned = 0.00386951 Jy
! Component: 700  -  total flux cleaned = 0.00421457 Jy
! Component: 750  -  total flux cleaned = 0.00449879 Jy
! Component: 800  -  total flux cleaned = 0.00494684 Jy
! Component: 850  -  total flux cleaned = 0.0051126 Jy
! Component: 900  -  total flux cleaned = 0.00565702 Jy
! Component: 950  -  total flux cleaned = 0.00576458 Jy
! Component: 1000  -  total flux cleaned = 0.00608201 Jy
! Component: 1050  -  total flux cleaned = 0.0062923 Jy
! Component: 1100  -  total flux cleaned = 0.00655044 Jy
! Component: 1150  -  total flux cleaned = 0.00690906 Jy
! Component: 1200  -  total flux cleaned = 0.00726289 Jy
! Component: 1250  -  total flux cleaned = 0.00761219 Jy
! Component: 1300  -  total flux cleaned = 0.00810541 Jy
! Component: 1350  -  total flux cleaned = 0.00829981 Jy
! Component: 1400  -  total flux cleaned = 0.00873382 Jy
! Component: 1450  -  total flux cleaned = 0.00901953 Jy
! Component: 1500  -  total flux cleaned = 0.00949147 Jy
! Component: 1550  -  total flux cleaned = 0.00991145 Jy
! Component: 1600  -  total flux cleaned = 0.0100964 Jy
! Component: 1650  -  total flux cleaned = 0.0104623 Jy
! Component: 1700  -  total flux cleaned = 0.0108697 Jy
! Component: 1750  -  total flux cleaned = 0.0110493 Jy
! Component: 1800  -  total flux cleaned = 0.0114931 Jy
! Component: 1850  -  total flux cleaned = 0.0117566 Jy
! Component: 1900  -  total flux cleaned = 0.0122781 Jy
! Component: 1950  -  total flux cleaned = 0.0125357 Jy
! Component: 2000  -  total flux cleaned = 0.0127916 Jy
! Component: 2050  -  total flux cleaned = 0.0130453 Jy
! Component: 2100  -  total flux cleaned = 0.0131712 Jy
! Component: 2150  -  total flux cleaned = 0.0135859 Jy
! Component: 2200  -  total flux cleaned = 0.0137091 Jy
! Component: 2250  -  total flux cleaned = 0.0141163 Jy
! Component: 2300  -  total flux cleaned = 0.0142368 Jy
! Component: 2350  -  total flux cleaned = 0.014477 Jy
! Component: 2400  -  total flux cleaned = 0.0146356 Jy
! Component: 2450  -  total flux cleaned = 0.0149897 Jy
! Component: 2500  -  total flux cleaned = 0.0151452 Jy
! Component: 2550  -  total flux cleaned = 0.0154157 Jy
! Component: 2600  -  total flux cleaned = 0.0156841 Jy
! Component: 2650  -  total flux cleaned = 0.0157986 Jy
! Component: 2700  -  total flux cleaned = 0.0162132 Jy
! Component: 2750  -  total flux cleaned = 0.0164001 Jy
! Component: 2800  -  total flux cleaned = 0.0166594 Jy
! Component: 2850  -  total flux cleaned = 0.0167698 Jy
! Component: 2900  -  total flux cleaned = 0.0170251 Jy
! Component: 2950  -  total flux cleaned = 0.0170977 Jy
! Component: 3000  -  total flux cleaned = 0.0173135 Jy
! Component: 3050  -  total flux cleaned = 0.017599 Jy
! Component: 3100  -  total flux cleaned = 0.0177051 Jy
! Component: 3150  -  total flux cleaned = 0.017916 Jy
! Component: 3200  -  total flux cleaned = 0.0180556 Jy
! Component: 3250  -  total flux cleaned = 0.0181942 Jy
! Component: 3300  -  total flux cleaned = 0.0184343 Jy
! Component: 3350  -  total flux cleaned = 0.0185363 Jy
! Component: 3400  -  total flux cleaned = 0.0186382 Jy
! Component: 3450  -  total flux cleaned = 0.0189404 Jy
! Component: 3500  -  total flux cleaned = 0.0190734 Jy
! Component: 3550  -  total flux cleaned = 0.0190731 Jy
! Component: 3600  -  total flux cleaned = 0.0193364 Jy
! Component: 3650  -  total flux cleaned = 0.0195973 Jy
! Component: 3700  -  total flux cleaned = 0.0196298 Jy
! Component: 3750  -  total flux cleaned = 0.0198552 Jy
! Component: 3800  -  total flux cleaned = 0.0199513 Jy
! Component: 3850  -  total flux cleaned = 0.0201101 Jy
! Component: 3900  -  total flux cleaned = 0.020205 Jy
! Component: 3950  -  total flux cleaned = 0.0203931 Jy
! Component: 4000  -  total flux cleaned = 0.0204551 Jy
! Component: 4050  -  total flux cleaned = 0.0206406 Jy
! Total flux subtracted in 4096 components = 0.0206711 Jy
! Clean residual min=-0.001773 max=0.001650 Jy/beam
! Clean residual mean=0.000029 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 1.20928 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 480 components and 1.20928 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv117_uvs/J1310+3220_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.346 x 1.774 at -65.75 degrees (North through East)
! Clean map  min=-0.0044517  max=0.99333 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1310+3220_X_map.fits
wmodel /scr/pima/rv117_uvs/J1310+3220_X_map.mod
! Writing 480 model components to file: /scr/pima/rv117_uvs/J1310+3220_X_map.mod
wobs   /scr/pima/rv117_uvs/J1310+3220_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv117_uvs/J1310+3220_X_uvs.fits
wwins  /scr/pima/rv117_uvs/J1310+3220_X_map.win
! wwins: Wrote 6 windows to /scr/pima/rv117_uvs/J1310+3220_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.993331 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000545665 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.164799 0.164799 0.329597 0.659194 1.31839 2.63678 5.27355 10.5471 21.0942 42.1884 84.3769
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.993 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1820.4 
quit
! Quitting program
! Log file /scr/pima/rv117_uvs/J1310+3220_X_dfm.log closed on Sat Dec  9 23:43:58 2017