! Started logfile: /scr/pima/rv117_uvs/J1248-0632_X_dfm.log on Sat Dec 9 23:43:49 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1248-0632_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1248-0632_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.993939 visibilities/baseline/integration-bin. ! Found source: J1248-0632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1248-0632_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.074160Jy sigma=20.021022 ! Fit after self-cal, rms=0.623404Jy sigma=11.638939 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7051 mas, bmaj=1.799 mas, bpa=-3.09 degrees ! Estimated noise=0.718647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.292157 Jy ! Component: 100 - total flux cleaned = 0.356829 Jy ! Total flux subtracted in 100 components = 0.356829 Jy ! Clean residual min=-0.006308 max=0.021332 Jy/beam ! Clean residual mean=0.000013 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.356829 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.356829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066363Jy sigma=1.180001 ! Fit after self-cal, rms=0.066353Jy sigma=1.179794 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214261 Jy ! Component: 100 - total flux cleaned = 0.0312715 Jy ! Total flux subtracted in 100 components = 0.0312715 Jy ! Clean residual min=-0.004718 max=0.006221 Jy/beam ! Clean residual mean=0.000007 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.3881 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.3881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058736Jy sigma=1.017523 ! Fit after self-cal, rms=0.058702Jy sigma=1.016917 ! Inverting map ! Added new window around map position (0.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655672 Jy ! Component: 100 - total flux cleaned = 0.0100801 Jy ! Total flux subtracted in 100 components = 0.0100801 Jy ! Clean residual min=-0.004573 max=0.003975 Jy/beam ! Clean residual mean=0.000005 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.398181 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.398181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057931Jy sigma=0.999943 ! Fit after self-cal, rms=0.057868Jy sigma=0.998887 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8868 mas, bmaj=2.077 mas, bpa=-2.692 degrees ! Estimated noise=0.436791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430129 Jy ! Component: 100 - total flux cleaned = 0.0058086 Jy ! Component: 150 - total flux cleaned = 0.00674136 Jy ! Component: 200 - total flux cleaned = 0.0074833 Jy ! Total flux subtracted in 200 components = 0.0074833 Jy ! Clean residual min=-0.002623 max=0.002800 Jy/beam ! Clean residual mean=0.000008 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.405664 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 42 components and 0.405664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057516Jy sigma=0.991844 ! Fit after self-cal, rms=0.057493Jy sigma=0.991437 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8868 x 2.077 at -2.692 degrees (North through East) ! Clean map min=-0.0021247 max=0.3738 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.00 ! LA 1.00 MK 1.01 NL 0.98 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.02 KP 1.00 ! LA 0.99 MK 1.00 NL 0.98 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 KP 1.00 ! LA 1.00 MK 1.00 NL 0.99 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.01 ! LA 1.00 MK 0.99 NL 0.99 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.057493Jy sigma=0.991437 ! Fit after self-cal, rms=0.057216Jy sigma=0.987024 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8862 mas, bmaj=2.076 mas, bpa=-2.588 degrees ! Estimated noise=0.436071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111966 Jy ! Component: 100 - total flux cleaned = 0.00119038 Jy ! Component: 150 - total flux cleaned = 0.00122169 Jy ! Component: 200 - total flux cleaned = 0.00125081 Jy ! Total flux subtracted in 200 components = 0.00125081 Jy ! Clean residual min=-0.002102 max=0.002345 Jy/beam ! Clean residual mean=0.000007 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.406915 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.406915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057167Jy sigma=0.986369 ! Fit after self-cal, rms=0.057163Jy sigma=0.986313 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057163Jy sigma=0.986313 ! Fit after self-cal, rms=0.056929Jy sigma=0.981422 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=2.078 mas, bpa=-2.602 degrees ! Estimated noise=0.436286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051968 Jy ! Component: 100 - total flux cleaned = 0.000582188 Jy ! Component: 150 - total flux cleaned = 0.000554676 Jy ! Component: 200 - total flux cleaned = 0.000553942 Jy ! Total flux subtracted in 200 components = 0.000553942 Jy ! Clean residual min=-0.001945 max=0.001964 Jy/beam ! Clean residual mean=0.000003 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.407469 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.407469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056893Jy sigma=0.980807 ! Fit after self-cal, rms=0.056893Jy sigma=0.980753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.2, 35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164343 Jy ! Component: 100 - total flux cleaned = 0.00196688 Jy ! Component: 150 - total flux cleaned = 0.00208166 Jy ! Component: 200 - total flux cleaned = 0.00218648 Jy ! Total flux subtracted in 200 components = 0.00218648 Jy ! Clean residual min=-0.001862 max=0.001900 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.409655 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.409655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056826Jy sigma=0.979792 ! Fit after self-cal, rms=0.056824Jy sigma=0.979745 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056824Jy sigma=0.979745 ! Fit after self-cal, rms=0.056810Jy sigma=0.979283 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.885 mas, bmaj=2.077 mas, bpa=-2.597 degrees ! Estimated noise=0.436448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707614 Jy ! Component: 100 - total flux cleaned = 0.000840453 Jy ! Component: 150 - total flux cleaned = 0.000887853 Jy ! Component: 200 - total flux cleaned = 0.000887455 Jy ! Total flux subtracted in 200 components = 0.000887455 Jy ! Clean residual min=-0.001853 max=0.001868 Jy/beam ! Clean residual mean=0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.410543 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.410543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056783Jy sigma=0.978923 ! Fit after self-cal, rms=0.056782Jy sigma=0.978899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.29217e-05 Jy ! Component: 100 - total flux cleaned = 3.25813e-05 Jy ! Component: 150 - total flux cleaned = 5.28084e-05 Jy ! Component: 200 - total flux cleaned = 5.29057e-05 Jy ! Total flux subtracted in 200 components = 5.29057e-05 Jy ! Clean residual min=-0.001855 max=0.001849 Jy/beam ! Clean residual mean=0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.410596 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 96 components and 0.410596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056766Jy sigma=0.978674 ! Fit after self-cal, rms=0.056765Jy sigma=0.978659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056765Jy sigma=0.978659 ! Fit after self-cal, rms=0.056764Jy sigma=0.978248 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.182 mas, bmaj=3.675 mas, bpa=3.164 degrees ! Estimated noise=0.543214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634321 Jy ! Component: 100 - total flux cleaned = 0.000921728 Jy ! Component: 150 - total flux cleaned = 0.000964647 Jy ! Component: 200 - total flux cleaned = 0.00100228 Jy ! Total flux subtracted in 200 components = 0.00100228 Jy ! Clean residual min=-0.001642 max=0.001582 Jy/beam ! Clean residual mean=0.000005 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.411598 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 106 components and 0.411598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056756Jy sigma=0.978206 ! Fit after self-cal, rms=0.056756Jy sigma=0.978195 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210583 Jy ! Component: 100 - total flux cleaned = 0.00025227 Jy ! Component: 150 - total flux cleaned = 0.000289769 Jy ! Component: 200 - total flux cleaned = 0.000315791 Jy ! Total flux subtracted in 200 components = 0.000315791 Jy ! Clean residual min=-0.001615 max=0.001589 Jy/beam ! Clean residual mean=0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.411914 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.411914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056754Jy sigma=0.978217 ! Fit after self-cal, rms=0.056754Jy sigma=0.978215 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8846 mas, bmaj=2.077 mas, bpa=-2.596 degrees ! Estimated noise=0.436655 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8846 x 2.077 at -2.596 degrees (North through East) ! Clean map min=-0.0017193 max=0.37356 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7034 mas, bmaj=1.799 mas, bpa=-3.018 degrees ! Estimated noise=0.717972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291797 Jy ! Component: 100 - total flux cleaned = 0.356799 Jy ! Component: 150 - total flux cleaned = 0.379094 Jy ! Component: 200 - total flux cleaned = 0.389789 Jy ! Total flux subtracted in 200 components = 0.389789 Jy ! Clean residual min=-0.003557 max=0.005005 Jy/beam ! Clean residual mean=0.000005 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.389789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.389789 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8846 mas, bmaj=2.077 mas, bpa=-2.596 degrees ! Estimated noise=0.436655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726181 Jy ! Component: 100 - total flux cleaned = 0.0113276 Jy ! Component: 150 - total flux cleaned = 0.0139424 Jy ! Component: 200 - total flux cleaned = 0.0158972 Jy ! Total flux subtracted in 200 components = 0.0158972 Jy ! Clean residual min=-0.002088 max=0.001909 Jy/beam ! Clean residual mean=0.000004 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.405686 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 37 components and 0.405686 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.182 mas, bmaj=3.675 mas, bpa=3.164 degrees ! Estimated noise=0.543214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215625 Jy ! Component: 100 - total flux cleaned = 0.00346487 Jy ! Component: 150 - total flux cleaned = 0.00433588 Jy ! Component: 200 - total flux cleaned = 0.00494278 Jy ! Total flux subtracted in 200 components = 0.00494278 Jy ! Clean residual min=-0.001598 max=0.001620 Jy/beam ! Clean residual mean=0.000006 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.410629 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373837 Jy ! Component: 100 - total flux cleaned = 0.000562371 Jy ! Component: 150 - total flux cleaned = 0.000713833 Jy ! Component: 200 - total flux cleaned = 0.000847859 Jy ! Total flux subtracted in 200 components = 0.000847859 Jy ! Clean residual min=-0.001577 max=0.001584 Jy/beam ! Clean residual mean=0.000005 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.411476 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 76 components and 0.411476 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8846 mas, bmaj=2.077 mas, bpa=-2.596 degrees ! Estimated noise=0.436655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98453e-05 Jy ! Component: 100 - total flux cleaned = -6.86856e-05 Jy ! Component: 150 - total flux cleaned = -7.11639e-05 Jy ! Component: 200 - total flux cleaned = -4.84401e-05 Jy ! Total flux subtracted in 200 components = -4.84401e-05 Jy ! Clean residual min=-0.001828 max=0.001769 Jy/beam ! Clean residual mean=0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.411428 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.411428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056758Jy sigma=0.978447 ! Fit after self-cal, rms=0.056751Jy sigma=0.978379 wmodel J1248-0632_X_map.mod ! Writing 97 model components to file: J1248-0632_X_map.mod wobs J1248-0632_X_uvs.fits ! Writing UV FITS file: J1248-0632_X_uvs.fits wwins J1248-0632_X_map.win ! wwins: Wrote 4 windows to J1248-0632_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114694 Jy ! Component: 100 - total flux cleaned = -8.33903e-05 Jy ! Component: 150 - total flux cleaned = -0.000112669 Jy ! Component: 200 - total flux cleaned = -0.000113077 Jy ! Component: 250 - total flux cleaned = -0.000139718 Jy ! Component: 300 - total flux cleaned = -0.000192029 Jy ! Component: 350 - total flux cleaned = -0.000217581 Jy ! Component: 400 - total flux cleaned = -0.000216771 Jy ! Component: 450 - total flux cleaned = -0.000191754 Jy ! Component: 500 - total flux cleaned = -0.000240279 Jy ! Component: 550 - total flux cleaned = -0.000216044 Jy ! Component: 600 - total flux cleaned = -0.000286646 Jy ! Component: 650 - total flux cleaned = -0.000263239 Jy ! Component: 700 - total flux cleaned = -0.000308827 Jy ! Component: 750 - total flux cleaned = -0.00039798 Jy ! Component: 800 - total flux cleaned = -0.000420083 Jy ! Component: 850 - total flux cleaned = -0.000572666 Jy ! Component: 900 - total flux cleaned = -0.000615198 Jy ! Component: 950 - total flux cleaned = -0.000615741 Jy ! Component: 1000 - total flux cleaned = -0.000720884 Jy ! Component: 1050 - total flux cleaned = -0.000783018 Jy ! Component: 1100 - total flux cleaned = -0.000925786 Jy ! Component: 1150 - total flux cleaned = -0.00102668 Jy ! Component: 1200 - total flux cleaned = -0.00106618 Jy ! Component: 1250 - total flux cleaned = -0.00114502 Jy ! Component: 1300 - total flux cleaned = -0.00114494 Jy ! Component: 1350 - total flux cleaned = -0.00118328 Jy ! Component: 1400 - total flux cleaned = -0.00120229 Jy ! Component: 1450 - total flux cleaned = -0.00129683 Jy ! Component: 1500 - total flux cleaned = -0.0013343 Jy ! Component: 1550 - total flux cleaned = -0.00137135 Jy ! Component: 1600 - total flux cleaned = -0.00146352 Jy ! Component: 1650 - total flux cleaned = -0.00146376 Jy ! Component: 1700 - total flux cleaned = -0.00159065 Jy ! Component: 1750 - total flux cleaned = -0.00159086 Jy ! Component: 1800 - total flux cleaned = -0.00166176 Jy ! Component: 1850 - total flux cleaned = -0.00169716 Jy ! Component: 1900 - total flux cleaned = -0.00173198 Jy ! Component: 1950 - total flux cleaned = -0.00176682 Jy ! Component: 2000 - total flux cleaned = -0.00181854 Jy ! Component: 2050 - total flux cleaned = -0.0018698 Jy ! Component: 2100 - total flux cleaned = -0.00190369 Jy ! Component: 2150 - total flux cleaned = -0.00197114 Jy ! Component: 2200 - total flux cleaned = -0.00202128 Jy ! Component: 2250 - total flux cleaned = -0.00208772 Jy ! Component: 2300 - total flux cleaned = -0.00210435 Jy ! Component: 2350 - total flux cleaned = -0.00216974 Jy ! Component: 2400 - total flux cleaned = -0.00213742 Jy ! Component: 2450 - total flux cleaned = -0.00218586 Jy ! Component: 2500 - total flux cleaned = -0.00228217 Jy ! Component: 2550 - total flux cleaned = -0.00232997 Jy ! Component: 2600 - total flux cleaned = -0.00233016 Jy ! Component: 2650 - total flux cleaned = -0.00237718 Jy ! Component: 2700 - total flux cleaned = -0.00237715 Jy ! Component: 2750 - total flux cleaned = -0.00242384 Jy ! Component: 2800 - total flux cleaned = -0.00243924 Jy ! Component: 2850 - total flux cleaned = -0.00248518 Jy ! Component: 2900 - total flux cleaned = -0.0024699 Jy ! Component: 2950 - total flux cleaned = -0.00248504 Jy ! Component: 3000 - total flux cleaned = -0.00250002 Jy ! Component: 3050 - total flux cleaned = -0.0024849 Jy ! Component: 3100 - total flux cleaned = -0.00247022 Jy ! Component: 3150 - total flux cleaned = -0.00255904 Jy ! Component: 3200 - total flux cleaned = -0.0024561 Jy ! Component: 3250 - total flux cleaned = -0.00251454 Jy ! Component: 3300 - total flux cleaned = -0.00252899 Jy ! Component: 3350 - total flux cleaned = -0.00251447 Jy ! Component: 3400 - total flux cleaned = -0.0025575 Jy ! Component: 3450 - total flux cleaned = -0.00257195 Jy ! Component: 3500 - total flux cleaned = -0.00257193 Jy ! Component: 3550 - total flux cleaned = -0.00264289 Jy ! Component: 3600 - total flux cleaned = -0.00264283 Jy ! Component: 3650 - total flux cleaned = -0.00267093 Jy ! Component: 3700 - total flux cleaned = -0.00267098 Jy ! Component: 3750 - total flux cleaned = -0.00274042 Jy ! Component: 3800 - total flux cleaned = -0.00274046 Jy ! Component: 3850 - total flux cleaned = -0.00276784 Jy ! Component: 3900 - total flux cleaned = -0.00272683 Jy ! Component: 3950 - total flux cleaned = -0.00278118 Jy ! Component: 4000 - total flux cleaned = -0.00279482 Jy ! Component: 4050 - total flux cleaned = -0.00275456 Jy ! Total flux subtracted in 4096 components = -0.00270093 Jy ! Clean residual min=-0.000787 max=0.001110 Jy/beam ! Clean residual mean=0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.408727 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 407 components and 0.408727 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1248-0632_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8846 x 2.077 at -2.596 degrees (North through East) ! Clean map min=-0.0015059 max=0.37295 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1248-0632_X_map.fits wmodel /scr/pima/rv117_uvs/J1248-0632_X_map.mod ! Writing 407 model components to file: /scr/pima/rv117_uvs/J1248-0632_X_map.mod wobs /scr/pima/rv117_uvs/J1248-0632_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1248-0632_X_uvs.fits wwins /scr/pima/rv117_uvs/J1248-0632_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1248-0632_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.37295 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227503 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.183002 0.183002 0.366005 0.73201 1.46402 2.92804 5.85608 11.7122 23.4243 46.8486 93.6972 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.372 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1639.32 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1248-0632_X_dfm.log closed on Sat Dec 9 23:43:53 2017