! Started logfile: /scr/pima/rv117_uvs/J1248-0632_S_dfm.log on Sat Dec 9 23:44:12 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1248-0632_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1248-0632_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970707 visibilities/baseline/integration-bin. ! Found source: J1248-0632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1248-0632_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.331425Jy sigma=17.614363 ! Fit after self-cal, rms=1.032100Jy sigma=13.190362 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.426 mas, bpa=0.8933 degrees ! Estimated noise=0.895651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184632 Jy ! Component: 100 - total flux cleaned = 0.226149 Jy ! Total flux subtracted in 100 components = 0.226149 Jy ! Clean residual min=-0.015472 max=0.014401 Jy/beam ! Clean residual mean=0.000008 rms=0.003170 Jy/beam ! Combined flux in latest and established models = 0.226149 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.226149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.817258Jy sigma=1.250100 ! Fit after self-cal, rms=0.817295Jy sigma=1.249646 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=7.584 mas, bpa=-0.09139 degrees ! Estimated noise=0.503373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152337 Jy ! Component: 100 - total flux cleaned = 0.0215966 Jy ! Component: 150 - total flux cleaned = 0.0229822 Jy ! Component: 200 - total flux cleaned = 0.0231109 Jy ! Total flux subtracted in 200 components = 0.0231109 Jy ! Clean residual min=-0.011600 max=0.009735 Jy/beam ! Clean residual mean=-0.000004 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.24926 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.24926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.815717Jy sigma=1.226982 ! Fit after self-cal, rms=0.815723Jy sigma=1.226708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.315 x 7.584 at -0.09139 degrees (North through East) ! Clean map min=-0.011328 max=0.23687 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 0.92 KP 1.04 ! LA 1.02 MK 1.06 NL 1.07 OV 0.97 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.85 HN 0.94 KP 1.07 ! LA 0.98 MK 1.04 NL 1.06 OV 1.04 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.01 KP 1.03 ! LA 1.00 MK 1.06 NL 1.21 OV 1.03 ! PT 1.08 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.85 HN 0.99 KP 1.04 ! LA 1.02 MK 1.07 NL 1.08 OV 1.00 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.815723Jy sigma=1.226708 ! Fit after self-cal, rms=0.835481Jy sigma=1.171953 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.65 mas, bpa=0.3706 degrees ! Estimated noise=0.518329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435633 Jy ! Component: 100 - total flux cleaned = 0.00371558 Jy ! Component: 150 - total flux cleaned = 0.00309283 Jy ! Component: 200 - total flux cleaned = 0.00288872 Jy ! Total flux subtracted in 200 components = 0.00288872 Jy ! Clean residual min=-0.011241 max=0.008561 Jy/beam ! Clean residual mean=0.000000 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.252149 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.252149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.833760Jy sigma=1.179666 ! Fit after self-cal, rms=0.833778Jy sigma=1.179352 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.833778Jy sigma=1.179352 ! Fit after self-cal, rms=0.079363Jy sigma=0.959017 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.684 mas, bpa=0.3636 degrees ! Estimated noise=0.516507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239933 Jy ! Component: 100 - total flux cleaned = 1.26349e-05 Jy ! Component: 150 - total flux cleaned = 4.96866e-05 Jy ! Component: 200 - total flux cleaned = 8.46784e-05 Jy ! Total flux subtracted in 200 components = 8.46784e-05 Jy ! Clean residual min=-0.003272 max=0.004267 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.252234 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.252234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079308Jy sigma=0.958127 ! Fit after self-cal, rms=0.079245Jy sigma=0.957497 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403051 Jy ! Component: 100 - total flux cleaned = 0.00629426 Jy ! Component: 150 - total flux cleaned = 0.00798665 Jy ! Component: 200 - total flux cleaned = 0.00912974 Jy ! Total flux subtracted in 200 components = 0.00912974 Jy ! Clean residual min=-0.003352 max=0.003139 Jy/beam ! Clean residual mean=0.000001 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.261363 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.261363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079019Jy sigma=0.952465 ! Fit after self-cal, rms=0.079019Jy sigma=0.952334 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079019Jy sigma=0.952334 ! Fit after self-cal, rms=0.104888Jy sigma=0.989898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.687 mas, bpa=0.6857 degrees ! Estimated noise=0.525816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314172 Jy ! Component: 100 - total flux cleaned = 0.00420573 Jy ! Component: 150 - total flux cleaned = 0.00484204 Jy ! Component: 200 - total flux cleaned = 0.00492818 Jy ! Total flux subtracted in 200 components = 0.00492818 Jy ! Clean residual min=-0.004565 max=0.004747 Jy/beam ! Clean residual mean=0.000003 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.266291 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.266291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104249Jy sigma=0.988378 ! Fit after self-cal, rms=0.104304Jy sigma=0.988180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20335e-05 Jy ! Component: 100 - total flux cleaned = 0.000253671 Jy ! Component: 150 - total flux cleaned = 0.000392223 Jy ! Component: 200 - total flux cleaned = 0.000525349 Jy ! Total flux subtracted in 200 components = 0.000525349 Jy ! Clean residual min=-0.004521 max=0.004944 Jy/beam ! Clean residual mean=0.000003 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.266817 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.266817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104070Jy sigma=0.987526 ! Fit after self-cal, rms=0.104063Jy sigma=0.987465 ! Inverting map ! Added new window around map position (4, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186687 Jy ! Component: 100 - total flux cleaned = 0.00217162 Jy ! Component: 150 - total flux cleaned = 0.0021734 Jy ! Component: 200 - total flux cleaned = 0.00228931 Jy ! Total flux subtracted in 200 components = 0.00228931 Jy ! Clean residual min=-0.004155 max=0.003819 Jy/beam ! Clean residual mean=0.000003 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.269106 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.269106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103259Jy sigma=0.982088 ! Fit after self-cal, rms=0.103228Jy sigma=0.981580 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103228Jy sigma=0.981580 ! Fit after self-cal, rms=0.107158Jy sigma=0.982517 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=13.42 mas, bpa=8.227 degrees ! Estimated noise=0.633736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286646 Jy ! Component: 100 - total flux cleaned = 0.00500838 Jy ! Component: 150 - total flux cleaned = 0.00629987 Jy ! Component: 200 - total flux cleaned = 0.00676719 Jy ! Total flux subtracted in 200 components = 0.00676719 Jy ! Clean residual min=-0.003526 max=0.005349 Jy/beam ! Clean residual mean=0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.275873 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.275873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106873Jy sigma=0.981167 ! Fit after self-cal, rms=0.106873Jy sigma=0.981104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, 46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049979 Jy ! Component: 100 - total flux cleaned = 0.00800373 Jy ! Component: 150 - total flux cleaned = 0.0103544 Jy ! Component: 200 - total flux cleaned = 0.0123338 Jy ! Total flux subtracted in 200 components = 0.0123338 Jy ! Clean residual min=-0.002912 max=0.002720 Jy/beam ! Clean residual mean=0.000003 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.288207 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 167 components and 0.288207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106475Jy sigma=0.976724 ! Fit after self-cal, rms=0.106460Jy sigma=0.976639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.688 mas, bpa=0.8288 degrees ! Estimated noise=0.531412 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.365 x 7.688 at 0.8288 degrees (North through East) ! Clean map min=-0.005437 max=0.2555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=6.486 mas, bpa=1.594 degrees ! Estimated noise=0.950758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195932 Jy ! Component: 100 - total flux cleaned = 0.238772 Jy ! Component: 150 - total flux cleaned = 0.25145 Jy ! Component: 200 - total flux cleaned = 0.256025 Jy ! Total flux subtracted in 200 components = 0.256025 Jy ! Clean residual min=-0.007991 max=0.005790 Jy/beam ! Clean residual mean=0.000004 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.256025 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.256025 Jy ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.688 mas, bpa=0.8288 degrees ! Estimated noise=0.531412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635862 Jy ! Component: 100 - total flux cleaned = 0.00981722 Jy ! Component: 150 - total flux cleaned = 0.0118261 Jy ! Component: 200 - total flux cleaned = 0.0136914 Jy ! Total flux subtracted in 200 components = 0.0136914 Jy ! Clean residual min=-0.005333 max=0.004305 Jy/beam ! Clean residual mean=0.000005 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.269716 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 56 components and 0.269716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=13.42 mas, bpa=8.227 degrees ! Estimated noise=0.633736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480739 Jy ! Component: 100 - total flux cleaned = 0.00852064 Jy ! Component: 150 - total flux cleaned = 0.0116628 Jy ! Component: 200 - total flux cleaned = 0.0143636 Jy ! Total flux subtracted in 200 components = 0.0143636 Jy ! Clean residual min=-0.003249 max=0.002845 Jy/beam ! Clean residual mean=0.000004 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.28408 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170328 Jy ! Component: 100 - total flux cleaned = 0.00316162 Jy ! Component: 150 - total flux cleaned = 0.00465071 Jy ! Component: 200 - total flux cleaned = 0.00595865 Jy ! Total flux subtracted in 200 components = 0.00595865 Jy ! Clean residual min=-0.002995 max=0.002673 Jy/beam ! Clean residual mean=0.000003 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.290038 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 124 components and 0.290038 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.688 mas, bpa=0.8288 degrees ! Estimated noise=0.531412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000935217 Jy ! Component: 100 - total flux cleaned = -0.000937642 Jy ! Component: 150 - total flux cleaned = -0.000649413 Jy ! Component: 200 - total flux cleaned = -0.000249325 Jy ! Total flux subtracted in 200 components = -0.000249325 Jy ! Clean residual min=-0.004817 max=0.004046 Jy/beam ! Clean residual mean=0.000003 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.289789 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 144 components and 0.289789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106056Jy sigma=0.977254 ! Fit after self-cal, rms=0.106014Jy sigma=0.976537 wmodel J1248-0632_S_map.mod ! Writing 144 model components to file: J1248-0632_S_map.mod wobs J1248-0632_S_uvs.fits ! Writing UV FITS file: J1248-0632_S_uvs.fits wwins J1248-0632_S_map.win ! wwins: Wrote 4 windows to J1248-0632_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557255 Jy ! Component: 100 - total flux cleaned = -0.000939242 Jy ! Component: 150 - total flux cleaned = -0.00112387 Jy ! Component: 200 - total flux cleaned = -0.00148079 Jy ! Component: 250 - total flux cleaned = -0.00177118 Jy ! Component: 300 - total flux cleaned = -0.00199755 Jy ! Component: 350 - total flux cleaned = -0.00216377 Jy ! Component: 400 - total flux cleaned = -0.00227282 Jy ! Component: 450 - total flux cleaned = -0.0024884 Jy ! Component: 500 - total flux cleaned = -0.00259539 Jy ! Component: 550 - total flux cleaned = -0.00285928 Jy ! Component: 600 - total flux cleaned = -0.00306732 Jy ! Component: 650 - total flux cleaned = -0.00332344 Jy ! Component: 700 - total flux cleaned = -0.00342482 Jy ! Component: 750 - total flux cleaned = -0.00362528 Jy ! Component: 800 - total flux cleaned = -0.00377403 Jy ! Component: 850 - total flux cleaned = -0.00382317 Jy ! Component: 900 - total flux cleaned = -0.00397005 Jy ! Component: 950 - total flux cleaned = -0.00416359 Jy ! Component: 1000 - total flux cleaned = -0.00435524 Jy ! Component: 1050 - total flux cleaned = -0.00459259 Jy ! Component: 1100 - total flux cleaned = -0.00468622 Jy ! Component: 1150 - total flux cleaned = -0.00487292 Jy ! Component: 1200 - total flux cleaned = -0.00505787 Jy ! Component: 1250 - total flux cleaned = -0.00505747 Jy ! Component: 1300 - total flux cleaned = -0.00519406 Jy ! Component: 1350 - total flux cleaned = -0.00519398 Jy ! Component: 1400 - total flux cleaned = -0.00523897 Jy ! Component: 1450 - total flux cleaned = -0.00532827 Jy ! Component: 1500 - total flux cleaned = -0.00528385 Jy ! Component: 1550 - total flux cleaned = -0.00537201 Jy ! Component: 1600 - total flux cleaned = -0.00537208 Jy ! Component: 1650 - total flux cleaned = -0.00532852 Jy ! Component: 1700 - total flux cleaned = -0.00532833 Jy ! Component: 1750 - total flux cleaned = -0.0053712 Jy ! Component: 1800 - total flux cleaned = -0.00541399 Jy ! Component: 1850 - total flux cleaned = -0.00549874 Jy ! Component: 1900 - total flux cleaned = -0.00549893 Jy ! Component: 1950 - total flux cleaned = -0.00549928 Jy ! Component: 2000 - total flux cleaned = -0.00570725 Jy ! Component: 2050 - total flux cleaned = -0.00570735 Jy ! Component: 2100 - total flux cleaned = -0.00578949 Jy ! Component: 2150 - total flux cleaned = -0.0057895 Jy ! Component: 2200 - total flux cleaned = -0.00591124 Jy ! Component: 2250 - total flux cleaned = -0.00591134 Jy ! Component: 2300 - total flux cleaned = -0.00607195 Jy ! Component: 2350 - total flux cleaned = -0.00607206 Jy ! Component: 2400 - total flux cleaned = -0.00615173 Jy ! Component: 2450 - total flux cleaned = -0.00626994 Jy ! Component: 2500 - total flux cleaned = -0.00630929 Jy ! Component: 2550 - total flux cleaned = -0.00638722 Jy ! Component: 2600 - total flux cleaned = -0.00646464 Jy ! Component: 2650 - total flux cleaned = -0.00654162 Jy ! Component: 2700 - total flux cleaned = -0.00665623 Jy ! Component: 2750 - total flux cleaned = -0.00665646 Jy ! Component: 2800 - total flux cleaned = -0.00669455 Jy ! Component: 2850 - total flux cleaned = -0.00680754 Jy ! Component: 2900 - total flux cleaned = -0.00676987 Jy ! Component: 2950 - total flux cleaned = -0.00684462 Jy ! Component: 3000 - total flux cleaned = -0.00691867 Jy ! Component: 3050 - total flux cleaned = -0.00702919 Jy ! Component: 3100 - total flux cleaned = -0.00702921 Jy ! Component: 3150 - total flux cleaned = -0.00713857 Jy ! Component: 3200 - total flux cleaned = -0.00717485 Jy ! Component: 3250 - total flux cleaned = -0.00717481 Jy ! Component: 3300 - total flux cleaned = -0.0072466 Jy ! Component: 3350 - total flux cleaned = -0.00728233 Jy ! Component: 3400 - total flux cleaned = -0.00731783 Jy ! Component: 3450 - total flux cleaned = -0.00742418 Jy ! Component: 3500 - total flux cleaned = -0.00745923 Jy ! Component: 3550 - total flux cleaned = -0.00749442 Jy ! Component: 3600 - total flux cleaned = -0.00763335 Jy ! Component: 3650 - total flux cleaned = -0.00770278 Jy ! Component: 3700 - total flux cleaned = -0.00770271 Jy ! Component: 3750 - total flux cleaned = -0.00770259 Jy ! Component: 3800 - total flux cleaned = -0.00780507 Jy ! Component: 3850 - total flux cleaned = -0.0078731 Jy ! Component: 3900 - total flux cleaned = -0.00790682 Jy ! Component: 3950 - total flux cleaned = -0.00790692 Jy ! Component: 4000 - total flux cleaned = -0.00797393 Jy ! Component: 4050 - total flux cleaned = -0.00804079 Jy ! Total flux subtracted in 4096 components = -0.00814043 Jy ! Clean residual min=-0.001805 max=0.001866 Jy/beam ! Clean residual mean=0.000002 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.281649 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 420 components and 0.281649 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1248-0632_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.365 x 7.688 at 0.8288 degrees (North through East) ! Clean map min=-0.0066872 max=0.25939 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1248-0632_S_map.fits wmodel /scr/pima/rv117_uvs/J1248-0632_S_map.mod ! Writing 420 model components to file: /scr/pima/rv117_uvs/J1248-0632_S_map.mod wobs /scr/pima/rv117_uvs/J1248-0632_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1248-0632_S_uvs.fits wwins /scr/pima/rv117_uvs/J1248-0632_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1248-0632_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.259392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625835 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.72381 0.72381 1.44762 2.89524 5.79048 11.581 23.1619 46.3239 92.6477 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.259 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 414.473 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1248-0632_S_dfm.log closed on Sat Dec 9 23:44:16 2017