! Started logfile: /scr/pima/rv117_uvs/J1159-0940_S_dfm.log on Sat Dec 9 23:43:58 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1159-0940_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1159-0940_S_uva.fits ! AN table 1: 24 integrations on 1 of 1 possible baselines. ! AN table 2: 34 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.588942 visibilities/baseline/integration-bin. ! Found source: J1159-0940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 2940 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1159-0940_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 118 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 118 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 118 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 118 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.026734Jy sigma=16.225131 ! Fit after self-cal, rms=0.842903Jy sigma=13.506928 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.373 mas, bmaj=9.038 mas, bpa=7.025 degrees ! Estimated noise=1.23124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11936 Jy ! Component: 100 - total flux cleaned = 0.161733 Jy ! Total flux subtracted in 100 components = 0.161733 Jy ! Clean residual min=-0.019840 max=0.068535 Jy/beam ! Clean residual mean=-0.000045 rms=0.006132 Jy/beam ! Combined flux in latest and established models = 0.161733 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.161733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144593Jy sigma=2.230540 ! Fit after self-cal, rms=0.141243Jy sigma=2.181159 ! Inverting map ! Added new window around map position (36, 14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589197 Jy ! Component: 100 - total flux cleaned = 0.0863123 Jy ! Total flux subtracted in 100 components = 0.0863123 Jy ! Clean residual min=-0.014415 max=0.031422 Jy/beam ! Clean residual mean=-0.000036 rms=0.004422 Jy/beam ! Combined flux in latest and established models = 0.248046 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.248046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113289Jy sigma=1.730595 ! Fit after self-cal, rms=0.107063Jy sigma=1.629831 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308797 Jy ! Component: 100 - total flux cleaned = 0.049774 Jy ! Total flux subtracted in 100 components = 0.049774 Jy ! Clean residual min=-0.013339 max=0.030788 Jy/beam ! Clean residual mean=-0.000021 rms=0.003484 Jy/beam ! Combined flux in latest and established models = 0.29782 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.29782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094651Jy sigma=1.435095 ! Fit after self-cal, rms=0.093595Jy sigma=1.419856 ! Inverting map ! Added new window around map position (9.5, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302857 Jy ! Component: 100 - total flux cleaned = 0.0483418 Jy ! Total flux subtracted in 100 components = 0.0483418 Jy ! Clean residual min=-0.008819 max=0.011498 Jy/beam ! Clean residual mean=0.000004 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 0.346161 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.346161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078491Jy sigma=1.182460 ! Fit after self-cal, rms=0.077199Jy sigma=1.160929 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.121 mas, bmaj=10.08 mas, bpa=3.31 degrees ! Estimated noise=0.950202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237546 Jy ! Component: 100 - total flux cleaned = 0.038846 Jy ! Component: 150 - total flux cleaned = 0.0499992 Jy ! Component: 200 - total flux cleaned = 0.0584772 Jy ! Total flux subtracted in 200 components = 0.0584772 Jy ! Clean residual min=-0.010653 max=0.014200 Jy/beam ! Clean residual mean=0.000074 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.404639 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 103 components and 0.404639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067590Jy sigma=1.012610 ! Fit after self-cal, rms=0.066903Jy sigma=1.000146 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.121 x 10.08 at 3.31 degrees (North through East) ! Clean map min=-0.010317 max=0.15259 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.91 HN 1.01 KP 1.03 ! LA 0.94 NL 1.06 OV 0.92 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.94 HN 1.04 KP 1.04 ! LA 0.91 NL 1.12 OV 1.00 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 1.03 KP 1.02 ! LA 0.97 NL 1.02 OV 1.01 PT 0.98 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.04 KP 1.00 ! LA 0.93 NL 1.06 OV 1.01 PT 1.00 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.066903Jy sigma=1.000146 ! Fit after self-cal, rms=0.063623Jy sigma=0.970599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.141 mas, bmaj=10.4 mas, bpa=3.434 degrees ! Estimated noise=0.939077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, -61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146382 Jy ! Component: 100 - total flux cleaned = 0.0232539 Jy ! Component: 150 - total flux cleaned = 0.0291091 Jy ! Component: 200 - total flux cleaned = 0.0320997 Jy ! Total flux subtracted in 200 components = 0.0320997 Jy ! Clean residual min=-0.007907 max=0.006497 Jy/beam ! Clean residual mean=0.000064 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.436738 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 176 components and 0.436738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059306Jy sigma=0.911943 ! Fit after self-cal, rms=0.058898Jy sigma=0.904055 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058898Jy sigma=0.904055 ! Fit after self-cal, rms=0.057364Jy sigma=0.869144 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.157 mas, bmaj=10.43 mas, bpa=2.99 degrees ! Estimated noise=0.938171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543942 Jy ! Component: 100 - total flux cleaned = 0.00813979 Jy ! Component: 150 - total flux cleaned = 0.00983583 Jy ! Component: 200 - total flux cleaned = 0.0106056 Jy ! Total flux subtracted in 200 components = 0.0106056 Jy ! Clean residual min=-0.006111 max=0.005055 Jy/beam ! Clean residual mean=0.000076 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.447344 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 214 components and 0.447344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056334Jy sigma=0.855938 ! Fit after self-cal, rms=0.056277Jy sigma=0.854287 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222518 Jy ! Component: 100 - total flux cleaned = 0.00305603 Jy ! Component: 150 - total flux cleaned = 0.00352841 Jy ! Component: 200 - total flux cleaned = 0.00387846 Jy ! Total flux subtracted in 200 components = 0.00387846 Jy ! Clean residual min=-0.005793 max=0.004745 Jy/beam ! Clean residual mean=0.000083 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.451222 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 233 components and 0.451222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055909Jy sigma=0.849360 ! Fit after self-cal, rms=0.055899Jy sigma=0.849031 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055899Jy sigma=0.849031 ! Fit after self-cal, rms=0.055170Jy sigma=0.827985 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.148 mas, bmaj=10.43 mas, bpa=2.946 degrees ! Estimated noise=0.931993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113965 Jy ! Component: 100 - total flux cleaned = 0.00192232 Jy ! Component: 150 - total flux cleaned = 0.00254818 Jy ! Component: 200 - total flux cleaned = 0.00290979 Jy ! Total flux subtracted in 200 components = 0.00290979 Jy ! Clean residual min=-0.005120 max=0.004082 Jy/beam ! Clean residual mean=0.000009 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.454132 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 244 components and 0.454132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054905Jy sigma=0.824047 ! Fit after self-cal, rms=0.054904Jy sigma=0.823742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868486 Jy ! Component: 100 - total flux cleaned = 0.00134169 Jy ! Component: 150 - total flux cleaned = 0.00165923 Jy ! Component: 200 - total flux cleaned = 0.0018403 Jy ! Total flux subtracted in 200 components = 0.0018403 Jy ! Clean residual min=-0.005049 max=0.003954 Jy/beam ! Clean residual mean=0.000012 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.455973 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 251 components and 0.455973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054754Jy sigma=0.821491 ! Fit after self-cal, rms=0.054752Jy sigma=0.821400 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054752Jy sigma=0.821400 ! Fit after self-cal, rms=0.054576Jy sigma=0.821055 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.383 mas, bmaj=13.34 mas, bpa=-6.238 degrees ! Estimated noise=1.05903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274555 Jy ! Component: 100 - total flux cleaned = 0.00338786 Jy ! Component: 150 - total flux cleaned = 0.00352057 Jy ! Component: 200 - total flux cleaned = 0.00358164 Jy ! Total flux subtracted in 200 components = 0.00358164 Jy ! Clean residual min=-0.005520 max=0.003994 Jy/beam ! Clean residual mean=0.000014 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.459554 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 274 components and 0.459554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054473Jy sigma=0.819356 ! Fit after self-cal, rms=0.054467Jy sigma=0.819166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821068 Jy ! Component: 100 - total flux cleaned = 0.000878556 Jy ! Component: 150 - total flux cleaned = 0.000881128 Jy ! Component: 200 - total flux cleaned = 0.000881471 Jy ! Total flux subtracted in 200 components = 0.000881471 Jy ! Clean residual min=-0.005297 max=0.003840 Jy/beam ! Clean residual mean=0.000017 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.460436 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 281 components and 0.460436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054418Jy sigma=0.818302 ! Fit after self-cal, rms=0.054417Jy sigma=0.818224 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.144 mas, bmaj=10.42 mas, bpa=3.032 degrees ! Estimated noise=0.928344 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.144 x 10.42 at 3.032 degrees (North through East) ! Clean map min=-0.0045712 max=0.14813 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.346 mas, bmaj=9.355 mas, bpa=6.668 degrees ! Estimated noise=1.22148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13209 Jy ! Component: 100 - total flux cleaned = 0.197945 Jy ! Component: 150 - total flux cleaned = 0.240154 Jy ! Component: 200 - total flux cleaned = 0.272406 Jy ! Total flux subtracted in 200 components = 0.272406 Jy ! Clean residual min=-0.010654 max=0.019061 Jy/beam ! Clean residual mean=-0.000061 rms=0.003135 Jy/beam ! Combined flux in latest and established models = 0.272405 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.272405 Jy ! Inverting map and beam ! Estimated beam: bmin=5.144 mas, bmaj=10.42 mas, bpa=3.032 degrees ! Estimated noise=0.928344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376511 Jy ! Component: 100 - total flux cleaned = 0.0634322 Jy ! Component: 150 - total flux cleaned = 0.0836907 Jy ! Component: 200 - total flux cleaned = 0.0999563 Jy ! Total flux subtracted in 200 components = 0.0999563 Jy ! Clean residual min=-0.007438 max=0.009931 Jy/beam ! Clean residual mean=-0.000008 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.372362 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 92 components and 0.372362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.383 mas, bmaj=13.34 mas, bpa=-6.238 degrees ! Estimated noise=1.05903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185939 Jy ! Component: 100 - total flux cleaned = 0.0324775 Jy ! Component: 150 - total flux cleaned = 0.0434438 Jy ! Component: 200 - total flux cleaned = 0.0522613 Jy ! Total flux subtracted in 200 components = 0.0522613 Jy ! Clean residual min=-0.006193 max=0.006790 Jy/beam ! Clean residual mean=0.000010 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.424623 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713999 Jy ! Component: 100 - total flux cleaned = 0.0129605 Jy ! Component: 150 - total flux cleaned = 0.0177216 Jy ! Component: 200 - total flux cleaned = 0.0216273 Jy ! Total flux subtracted in 200 components = 0.0216273 Jy ! Clean residual min=-0.005435 max=0.004554 Jy/beam ! Clean residual mean=0.000021 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.44625 Jy ! Adding 153 model components to the UV plane model. ! The established model now contains 223 components and 0.44625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.144 mas, bmaj=10.42 mas, bpa=3.032 degrees ! Estimated noise=0.928344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372471 Jy ! Component: 100 - total flux cleaned = 0.00606579 Jy ! Component: 150 - total flux cleaned = 0.00708021 Jy ! Component: 200 - total flux cleaned = 0.00772765 Jy ! Total flux subtracted in 200 components = 0.00772765 Jy ! Clean residual min=-0.004671 max=0.003837 Jy/beam ! Clean residual mean=0.000011 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.453978 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 247 components and 0.453978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054485Jy sigma=0.820889 ! Fit after self-cal, rms=0.054392Jy sigma=0.819369 wmodel J1159-0940_S_map.mod ! Writing 247 model components to file: J1159-0940_S_map.mod wobs J1159-0940_S_uvs.fits ! Writing UV FITS file: J1159-0940_S_uvs.fits wwins J1159-0940_S_map.win ! wwins: Wrote 4 windows to J1159-0940_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123056 Jy ! Component: 100 - total flux cleaned = -0.00142198 Jy ! Component: 150 - total flux cleaned = -0.00160224 Jy ! Component: 200 - total flux cleaned = -0.00199804 Jy ! Component: 250 - total flux cleaned = -0.00253553 Jy ! Component: 300 - total flux cleaned = -0.00274252 Jy ! Component: 350 - total flux cleaned = -0.00294164 Jy ! Component: 400 - total flux cleaned = -0.00318158 Jy ! Component: 450 - total flux cleaned = -0.00346233 Jy ! Component: 500 - total flux cleaned = -0.00369013 Jy ! Component: 550 - total flux cleaned = -0.00391207 Jy ! Component: 600 - total flux cleaned = -0.00395594 Jy ! Component: 650 - total flux cleaned = -0.00416761 Jy ! Component: 700 - total flux cleaned = -0.00412473 Jy ! Component: 750 - total flux cleaned = -0.00408302 Jy ! Component: 800 - total flux cleaned = -0.00400341 Jy ! Component: 850 - total flux cleaned = -0.00408217 Jy ! Component: 900 - total flux cleaned = -0.00412009 Jy ! Component: 950 - total flux cleaned = -0.00412043 Jy ! Component: 1000 - total flux cleaned = -0.00415739 Jy ! Component: 1050 - total flux cleaned = -0.00415718 Jy ! Component: 1100 - total flux cleaned = -0.00408545 Jy ! Component: 1150 - total flux cleaned = -0.00405059 Jy ! Component: 1200 - total flux cleaned = -0.00412039 Jy ! Component: 1250 - total flux cleaned = -0.00418882 Jy ! Component: 1300 - total flux cleaned = -0.00412142 Jy ! Component: 1350 - total flux cleaned = -0.00408858 Jy ! Component: 1400 - total flux cleaned = -0.00402394 Jy ! Component: 1450 - total flux cleaned = -0.00412169 Jy ! Component: 1500 - total flux cleaned = -0.00418551 Jy ! Component: 1550 - total flux cleaned = -0.00415462 Jy ! Component: 1600 - total flux cleaned = -0.00434087 Jy ! Component: 1650 - total flux cleaned = -0.00430986 Jy ! Component: 1700 - total flux cleaned = -0.00440057 Jy ! Component: 1750 - total flux cleaned = -0.00437068 Jy ! Component: 1800 - total flux cleaned = -0.00454793 Jy ! Component: 1850 - total flux cleaned = -0.00457684 Jy ! Component: 1900 - total flux cleaned = -0.00474966 Jy ! Component: 1950 - total flux cleaned = -0.0048063 Jy ! Component: 2000 - total flux cleaned = -0.00486253 Jy ! Component: 2050 - total flux cleaned = -0.00494623 Jy ! Component: 2100 - total flux cleaned = -0.00500142 Jy ! Component: 2150 - total flux cleaned = -0.00505629 Jy ! Component: 2200 - total flux cleaned = -0.00505645 Jy ! Component: 2250 - total flux cleaned = -0.00511021 Jy ! Component: 2300 - total flux cleaned = -0.0052433 Jy ! Component: 2350 - total flux cleaned = -0.00532224 Jy ! Component: 2400 - total flux cleaned = -0.00529604 Jy ! Component: 2450 - total flux cleaned = -0.00534756 Jy ! Component: 2500 - total flux cleaned = -0.0053987 Jy ! Component: 2550 - total flux cleaned = -0.00549999 Jy ! Component: 2600 - total flux cleaned = -0.00552552 Jy ! Component: 2650 - total flux cleaned = -0.0055756 Jy ! Component: 2700 - total flux cleaned = -0.00564978 Jy ! Component: 2750 - total flux cleaned = -0.0056742 Jy ! Component: 2800 - total flux cleaned = -0.00567425 Jy ! Component: 2850 - total flux cleaned = -0.00574608 Jy ! Component: 2900 - total flux cleaned = -0.00588896 Jy ! Component: 2950 - total flux cleaned = -0.00593612 Jy ! Component: 3000 - total flux cleaned = -0.005983 Jy ! Component: 3050 - total flux cleaned = -0.00605261 Jy ! Component: 3100 - total flux cleaned = -0.00609849 Jy ! Component: 3150 - total flux cleaned = -0.00605237 Jy ! Component: 3200 - total flux cleaned = -0.00614309 Jy ! Component: 3250 - total flux cleaned = -0.00621032 Jy ! Component: 3300 - total flux cleaned = -0.00612101 Jy ! Component: 3350 - total flux cleaned = -0.00616553 Jy ! Component: 3400 - total flux cleaned = -0.00623154 Jy ! Component: 3450 - total flux cleaned = -0.00631882 Jy ! Component: 3500 - total flux cleaned = -0.00627565 Jy ! Component: 3550 - total flux cleaned = -0.00629741 Jy ! Component: 3600 - total flux cleaned = -0.00638295 Jy ! Component: 3650 - total flux cleaned = -0.00636174 Jy ! Component: 3700 - total flux cleaned = -0.00655051 Jy ! Component: 3750 - total flux cleaned = -0.00644628 Jy ! Component: 3800 - total flux cleaned = -0.00650858 Jy ! Component: 3850 - total flux cleaned = -0.00659077 Jy ! Component: 3900 - total flux cleaned = -0.00652992 Jy ! Component: 3950 - total flux cleaned = -0.0066312 Jy ! Component: 4000 - total flux cleaned = -0.00665129 Jy ! Component: 4050 - total flux cleaned = -0.00671111 Jy ! Total flux subtracted in 4096 components = -0.00673077 Jy ! Clean residual min=-0.001234 max=0.001050 Jy/beam ! Clean residual mean=-0.000011 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.447247 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 551 components and 0.447247 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1159-0940_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.144 x 10.42 at 3.032 degrees (North through East) ! Clean map min=-0.0031093 max=0.14548 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1159-0940_S_map.fits wmodel /scr/pima/rv117_uvs/J1159-0940_S_map.mod ! Writing 551 model components to file: /scr/pima/rv117_uvs/J1159-0940_S_map.mod wobs /scr/pima/rv117_uvs/J1159-0940_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1159-0940_S_uvs.fits wwins /scr/pima/rv117_uvs/J1159-0940_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1159-0940_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.145481 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000401313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.827557 0.827557 1.65511 3.31023 6.62046 13.2409 26.4818 52.9637 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.145 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 362.512 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1159-0940_S_dfm.log closed on Sat Dec 9 23:44:02 2017