! Started logfile: /scr/pima/rv117_uvs/J1136+7009_X_dfm.log on Sat Dec 9 23:43:30 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1136+7009_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1136+7009_X_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.643352 visibilities/baseline/integration-bin. ! Found source: J1136+7009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 14128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1136+7009_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016365Jy sigma=19.522738 ! Fit after self-cal, rms=0.865873Jy sigma=16.585496 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9647 mas, bmaj=1.015 mas, bpa=-8.082 degrees ! Estimated noise=0.566573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0959511 Jy ! Component: 100 - total flux cleaned = 0.128806 Jy ! Total flux subtracted in 100 components = 0.128806 Jy ! Clean residual min=-0.003848 max=0.014527 Jy/beam ! Clean residual mean=-0.000008 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.128806 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.128806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061176Jy sigma=1.110649 ! Fit after self-cal, rms=0.060778Jy sigma=1.103469 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165665 Jy ! Component: 100 - total flux cleaned = 0.0245698 Jy ! Total flux subtracted in 100 components = 0.0245698 Jy ! Clean residual min=-0.002792 max=0.006131 Jy/beam ! Clean residual mean=-0.000004 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.153376 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.153376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054971Jy sigma=0.973384 ! Fit after self-cal, rms=0.054920Jy sigma=0.972138 ! Inverting map ! Added new window around map position (1.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628762 Jy ! Component: 100 - total flux cleaned = 0.00954998 Jy ! Total flux subtracted in 100 components = 0.00954998 Jy ! Clean residual min=-0.002453 max=0.002887 Jy/beam ! Clean residual mean=-0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.162926 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.162926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054136Jy sigma=0.953945 ! Fit after self-cal, rms=0.054071Jy sigma=0.952498 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.321 mas, bmaj=1.351 mas, bpa=84.22 degrees ! Estimated noise=0.326002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290412 Jy ! Component: 100 - total flux cleaned = 0.00417021 Jy ! Component: 150 - total flux cleaned = 0.0047861 Jy ! Component: 200 - total flux cleaned = 0.00482695 Jy ! Total flux subtracted in 200 components = 0.00482695 Jy ! Clean residual min=-0.001669 max=0.001892 Jy/beam ! Clean residual mean=-0.000004 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.167753 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.167753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053944Jy sigma=0.949219 ! Fit after self-cal, rms=0.053933Jy sigma=0.948879 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.321 x 1.351 at 84.22 degrees (North through East) ! Clean map min=-0.0016299 max=0.1293 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00 KP 1.00 ! LA 0.98 MK 0.99 NL 0.98 OV 1.01 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.02 KP 1.01 ! LA 0.99 MK 1.02 NL 0.98 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.99 KP 1.00 ! LA 1.00 MK 1.00 NL 0.99 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.99 KP 1.01 ! LA 0.99 MK 0.96 NL 0.98 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.053933Jy sigma=0.948879 ! Fit after self-cal, rms=0.054143Jy sigma=0.949555 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.336 mas, bmaj=1.348 mas, bpa=24.82 degrees ! Estimated noise=0.3281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621914 Jy ! Component: 100 - total flux cleaned = 0.000621493 Jy ! Component: 150 - total flux cleaned = 0.000606333 Jy ! Component: 200 - total flux cleaned = 0.000576226 Jy ! Total flux subtracted in 200 components = 0.000576226 Jy ! Clean residual min=-0.001701 max=0.001833 Jy/beam ! Clean residual mean=-0.000005 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.168329 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.168329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054117Jy sigma=0.949046 ! Fit after self-cal, rms=0.054121Jy sigma=0.948914 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054121Jy sigma=0.948914 ! Fit after self-cal, rms=0.054062Jy sigma=0.939548 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.348 mas, bpa=6.646 degrees ! Estimated noise=0.328637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.00394e-05 Jy ! Component: 100 - total flux cleaned = 8.83993e-05 Jy ! Component: 150 - total flux cleaned = 7.47039e-05 Jy ! Component: 200 - total flux cleaned = 7.46256e-05 Jy ! Total flux subtracted in 200 components = 7.46256e-05 Jy ! Clean residual min=-0.001282 max=0.001270 Jy/beam ! Clean residual mean=-0.000007 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.168404 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.168404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054051Jy sigma=0.939347 ! Fit after self-cal, rms=0.054057Jy sigma=0.939260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.2, 38.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112468 Jy ! Component: 100 - total flux cleaned = 0.00139042 Jy ! Component: 150 - total flux cleaned = 0.00147992 Jy ! Component: 200 - total flux cleaned = 0.00154103 Jy ! Total flux subtracted in 200 components = 0.00154103 Jy ! Clean residual min=-0.001298 max=0.001238 Jy/beam ! Clean residual mean=-0.000006 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.169945 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.169945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054022Jy sigma=0.938730 ! Fit after self-cal, rms=0.054020Jy sigma=0.938701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054020Jy sigma=0.938701 ! Fit after self-cal, rms=0.054075Jy sigma=0.938464 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.347 mas, bpa=2.374 degrees ! Estimated noise=0.328869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302145 Jy ! Component: 100 - total flux cleaned = 0.000398198 Jy ! Component: 150 - total flux cleaned = 0.000449748 Jy ! Component: 200 - total flux cleaned = 0.000514762 Jy ! Total flux subtracted in 200 components = 0.000514762 Jy ! Clean residual min=-0.001263 max=0.001268 Jy/beam ! Clean residual mean=-0.000006 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.17046 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.17046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054062Jy sigma=0.938251 ! Fit after self-cal, rms=0.054062Jy sigma=0.938231 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.2, -43.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869356 Jy ! Component: 100 - total flux cleaned = 0.00115049 Jy ! Component: 150 - total flux cleaned = 0.00130511 Jy ! Component: 200 - total flux cleaned = 0.00142268 Jy ! Total flux subtracted in 200 components = 0.00142268 Jy ! Clean residual min=-0.001312 max=0.001219 Jy/beam ! Clean residual mean=-0.000006 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.171882 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.171882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054032Jy sigma=0.937580 ! Fit after self-cal, rms=0.054029Jy sigma=0.937542 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054029Jy sigma=0.937542 ! Fit after self-cal, rms=0.054021Jy sigma=0.937489 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=2.737 mas, bpa=51.96 degrees ! Estimated noise=0.38974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.50672e-05 Jy ! Component: 100 - total flux cleaned = 0.000213598 Jy ! Component: 150 - total flux cleaned = 0.000384174 Jy ! Component: 200 - total flux cleaned = 0.000516773 Jy ! Total flux subtracted in 200 components = 0.000516773 Jy ! Clean residual min=-0.001524 max=0.001198 Jy/beam ! Clean residual mean=-0.000012 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.172399 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.172399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054017Jy sigma=0.937393 ! Fit after self-cal, rms=0.054016Jy sigma=0.937381 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114363 Jy ! Component: 100 - total flux cleaned = 0.000177069 Jy ! Component: 150 - total flux cleaned = 0.000195664 Jy ! Component: 200 - total flux cleaned = 0.000221282 Jy ! Total flux subtracted in 200 components = 0.000221282 Jy ! Clean residual min=-0.001507 max=0.001206 Jy/beam ! Clean residual mean=-0.000011 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.17262 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.17262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054014Jy sigma=0.937333 ! Fit after self-cal, rms=0.054014Jy sigma=0.937328 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.347 mas, bpa=0.8727 degrees ! Estimated noise=0.328901 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.335 x 1.347 at 0.8727 degrees (North through East) ! Clean map min=-0.0012338 max=0.12872 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9479 mas, bmaj=1.035 mas, bpa=-6.974 degrees ! Estimated noise=0.572339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961071 Jy ! Component: 100 - total flux cleaned = 0.130885 Jy ! Component: 150 - total flux cleaned = 0.146866 Jy ! Component: 200 - total flux cleaned = 0.155264 Jy ! Total flux subtracted in 200 components = 0.155264 Jy ! Clean residual min=-0.002461 max=0.004098 Jy/beam ! Clean residual mean=-0.000004 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.155264 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.155264 Jy ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.347 mas, bpa=0.8727 degrees ! Estimated noise=0.328901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669181 Jy ! Component: 100 - total flux cleaned = 0.00986449 Jy ! Component: 150 - total flux cleaned = 0.0116989 Jy ! Component: 200 - total flux cleaned = 0.0129679 Jy ! Total flux subtracted in 200 components = 0.0129679 Jy ! Clean residual min=-0.001167 max=0.001287 Jy/beam ! Clean residual mean=-0.000007 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.168232 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 0.168232 Jy ! Inverting map ! Added new window around map position (-5.8, 36.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114293 Jy ! Component: 100 - total flux cleaned = 0.00195154 Jy ! Component: 150 - total flux cleaned = 0.00248659 Jy ! Component: 200 - total flux cleaned = 0.00290186 Jy ! Total flux subtracted in 200 components = 0.00290186 Jy ! Clean residual min=-0.001193 max=0.001237 Jy/beam ! Clean residual mean=-0.000007 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.171134 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.171134 Jy ! Inverting map ! Added new window around map position (-30.8, 19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669895 Jy ! Component: 100 - total flux cleaned = 0.000910639 Jy ! Component: 150 - total flux cleaned = 0.00110528 Jy ! Component: 200 - total flux cleaned = 0.00128798 Jy ! Total flux subtracted in 200 components = 0.00128798 Jy ! Clean residual min=-0.001191 max=0.001236 Jy/beam ! Clean residual mean=-0.000007 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.172422 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.172422 Jy ! Inverting map ! Added new window around map position (13.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111231 Jy ! Component: 100 - total flux cleaned = 0.00136045 Jy ! Component: 150 - total flux cleaned = 0.00145847 Jy ! Component: 200 - total flux cleaned = 0.00152882 Jy ! Total flux subtracted in 200 components = 0.00152882 Jy ! Clean residual min=-0.001159 max=0.001118 Jy/beam ! Clean residual mean=-0.000006 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.173951 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 94 components and 0.173951 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=2.737 mas, bpa=51.96 degrees ! Estimated noise=0.38974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256556 Jy ! Component: 100 - total flux cleaned = -0.000123664 Jy ! Component: 150 - total flux cleaned = 1.26005e-05 Jy ! Component: 200 - total flux cleaned = 0.000167159 Jy ! Total flux subtracted in 200 components = 0.000167159 Jy ! Clean residual min=-0.001425 max=0.001154 Jy/beam ! Clean residual mean=-0.000010 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.174118 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107216 Jy ! Component: 100 - total flux cleaned = 0.000177182 Jy ! Component: 150 - total flux cleaned = 0.000267039 Jy ! Component: 200 - total flux cleaned = 0.000348552 Jy ! Total flux subtracted in 200 components = 0.000348552 Jy ! Clean residual min=-0.001422 max=0.001153 Jy/beam ! Clean residual mean=-0.000009 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.174466 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 122 components and 0.174466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.347 mas, bpa=0.8727 degrees ! Estimated noise=0.328901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108012 Jy ! Component: 100 - total flux cleaned = -0.000108078 Jy ! Component: 150 - total flux cleaned = -0.000108071 Jy ! Component: 200 - total flux cleaned = -0.000108608 Jy ! Total flux subtracted in 200 components = -0.000108608 Jy ! Clean residual min=-0.001159 max=0.001092 Jy/beam ! Clean residual mean=-0.000005 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.174358 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 136 components and 0.174358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053927Jy sigma=0.935721 ! Fit after self-cal, rms=0.053917Jy sigma=0.935497 wmodel J1136+7009_X_map.mod ! Writing 136 model components to file: J1136+7009_X_map.mod wobs J1136+7009_X_uvs.fits ! Writing UV FITS file: J1136+7009_X_uvs.fits wwins J1136+7009_X_map.win ! wwins: Wrote 7 windows to J1136+7009_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238841 Jy ! Component: 100 - total flux cleaned = -0.000279371 Jy ! Component: 150 - total flux cleaned = -0.000375296 Jy ! Component: 200 - total flux cleaned = -0.0003939 Jy ! Component: 250 - total flux cleaned = -0.000375718 Jy ! Component: 300 - total flux cleaned = -0.000268537 Jy ! Component: 350 - total flux cleaned = -0.000215999 Jy ! Component: 400 - total flux cleaned = -0.000163906 Jy ! Component: 450 - total flux cleaned = -0.000146693 Jy ! Component: 500 - total flux cleaned = -7.87217e-05 Jy ! Component: 550 - total flux cleaned = -0.000112015 Jy ! Component: 600 - total flux cleaned = -1.2303e-05 Jy ! Component: 650 - total flux cleaned = -1.2318e-05 Jy ! Component: 700 - total flux cleaned = 2.00089e-05 Jy ! Component: 750 - total flux cleaned = 8.42839e-05 Jy ! Component: 800 - total flux cleaned = 0.00011622 Jy ! Component: 850 - total flux cleaned = 0.000132138 Jy ! Component: 900 - total flux cleaned = 0.000163499 Jy ! Component: 950 - total flux cleaned = 0.000225896 Jy ! Component: 1000 - total flux cleaned = 0.000210309 Jy ! Component: 1050 - total flux cleaned = 0.000179779 Jy ! Component: 1100 - total flux cleaned = 0.000225569 Jy ! Component: 1150 - total flux cleaned = 0.000255923 Jy ! Component: 1200 - total flux cleaned = 0.000286017 Jy ! Component: 1250 - total flux cleaned = 0.000285981 Jy ! Component: 1300 - total flux cleaned = 0.000285967 Jy ! Component: 1350 - total flux cleaned = 0.000315482 Jy ! Component: 1400 - total flux cleaned = 0.000344931 Jy ! Component: 1450 - total flux cleaned = 0.000301136 Jy ! Component: 1500 - total flux cleaned = 0.00035919 Jy ! Component: 1550 - total flux cleaned = 0.000402464 Jy ! Component: 1600 - total flux cleaned = 0.0004025 Jy ! Component: 1650 - total flux cleaned = 0.000430892 Jy ! Component: 1700 - total flux cleaned = 0.000445125 Jy ! Component: 1750 - total flux cleaned = 0.000402751 Jy ! Component: 1800 - total flux cleaned = 0.000486866 Jy ! Component: 1850 - total flux cleaned = 0.000431192 Jy ! Component: 1900 - total flux cleaned = 0.000500597 Jy ! Component: 1950 - total flux cleaned = 0.000459272 Jy ! Component: 2000 - total flux cleaned = 0.000473052 Jy ! Component: 2050 - total flux cleaned = 0.000473204 Jy ! Component: 2100 - total flux cleaned = 0.000527559 Jy ! Component: 2150 - total flux cleaned = 0.000500465 Jy ! Component: 2200 - total flux cleaned = 0.000513938 Jy ! Component: 2250 - total flux cleaned = 0.00054072 Jy ! Component: 2300 - total flux cleaned = 0.000540674 Jy ! Component: 2350 - total flux cleaned = 0.000553906 Jy ! Component: 2400 - total flux cleaned = 0.000580349 Jy ! Component: 2450 - total flux cleaned = 0.000514412 Jy ! Component: 2500 - total flux cleaned = 0.000580019 Jy ! Component: 2550 - total flux cleaned = 0.000606194 Jy ! Component: 2600 - total flux cleaned = 0.000541084 Jy ! Component: 2650 - total flux cleaned = 0.000567 Jy ! Component: 2700 - total flux cleaned = 0.000644397 Jy ! Component: 2750 - total flux cleaned = 0.000592853 Jy ! Component: 2800 - total flux cleaned = 0.000567242 Jy ! Component: 2850 - total flux cleaned = 0.000580095 Jy ! Component: 2900 - total flux cleaned = 0.000656451 Jy ! Component: 2950 - total flux cleaned = 0.000643785 Jy ! Component: 3000 - total flux cleaned = 0.000668934 Jy ! Component: 3050 - total flux cleaned = 0.00061874 Jy ! Component: 3100 - total flux cleaned = 0.000631306 Jy ! Component: 3150 - total flux cleaned = 0.000656286 Jy ! Component: 3200 - total flux cleaned = 0.000668694 Jy ! Component: 3250 - total flux cleaned = 0.000656382 Jy ! Component: 3300 - total flux cleaned = 0.000705769 Jy ! Component: 3350 - total flux cleaned = 0.000681282 Jy ! Component: 3400 - total flux cleaned = 0.000656817 Jy ! Component: 3450 - total flux cleaned = 0.000681221 Jy ! Component: 3500 - total flux cleaned = 0.000766407 Jy ! Component: 3550 - total flux cleaned = 0.000742168 Jy ! Component: 3600 - total flux cleaned = 0.000705939 Jy ! Component: 3650 - total flux cleaned = 0.000729951 Jy ! Component: 3700 - total flux cleaned = 0.000729928 Jy ! Component: 3750 - total flux cleaned = 0.000741802 Jy ! Component: 3800 - total flux cleaned = 0.0007656 Jy ! Component: 3850 - total flux cleaned = 0.000753628 Jy ! Component: 3900 - total flux cleaned = 0.000753559 Jy ! Component: 3950 - total flux cleaned = 0.000788991 Jy ! Component: 4000 - total flux cleaned = 0.000765377 Jy ! Component: 4050 - total flux cleaned = 0.000741981 Jy ! Total flux subtracted in 4096 components = 0.000718591 Jy ! Clean residual min=-0.000809 max=0.000649 Jy/beam ! Clean residual mean=-0.000003 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.175076 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 446 components and 0.175076 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1136+7009_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.335 x 1.347 at 0.8727 degrees (North through East) ! Clean map min=-0.001048 max=0.12879 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1136+7009_X_map.fits wmodel /scr/pima/rv117_uvs/J1136+7009_X_map.mod ! Writing 446 model components to file: /scr/pima/rv117_uvs/J1136+7009_X_map.mod wobs /scr/pima/rv117_uvs/J1136+7009_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1136+7009_X_uvs.fits wwins /scr/pima/rv117_uvs/J1136+7009_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv117_uvs/J1136+7009_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.128792 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020189 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.470269 0.470269 0.940539 1.88108 3.76215 7.52431 15.0486 30.0972 60.1945 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.128 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 637.932 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1136+7009_X_dfm.log closed on Sat Dec 9 23:43:35 2017