! Started logfile: /scr/pima/rv117_uvs/J1136+7009_S_dfm.log on Sat Dec 9 23:43:53 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1136+7009_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1136+7009_S_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.654281 visibilities/baseline/integration-bin. ! Found source: J1136+7009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 14368 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1136+7009_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012720Jy sigma=18.377969 ! Fit after self-cal, rms=0.838627Jy sigma=15.207309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=3.914 mas, bpa=-20.01 degrees ! Estimated noise=0.611499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12435 Jy ! Component: 100 - total flux cleaned = 0.15221 Jy ! Total flux subtracted in 100 components = 0.15221 Jy ! Clean residual min=-0.002855 max=0.009248 Jy/beam ! Clean residual mean=-0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.15221 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.15221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049947Jy sigma=0.860591 ! Fit after self-cal, rms=0.049937Jy sigma=0.860463 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903823 Jy ! Component: 100 - total flux cleaned = 0.0128259 Jy ! Total flux subtracted in 100 components = 0.0128259 Jy ! Clean residual min=-0.002324 max=0.002958 Jy/beam ! Clean residual mean=0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.165036 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.165036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048165Jy sigma=0.825013 ! Fit after self-cal, rms=0.048163Jy sigma=0.824910 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.809 mas, bmaj=4.952 mas, bpa=-49.45 degrees ! Estimated noise=0.341678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443345 Jy ! Component: 100 - total flux cleaned = 0.00723126 Jy ! Component: 150 - total flux cleaned = 0.00917625 Jy ! Component: 200 - total flux cleaned = 0.0105703 Jy ! Total flux subtracted in 200 components = 0.0105703 Jy ! Clean residual min=-0.001402 max=0.001512 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.175606 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.175606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047710Jy sigma=0.815725 ! Fit after self-cal, rms=0.047661Jy sigma=0.814877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.809 x 4.952 at -49.45 degrees (North through East) ! Clean map min=-0.0012444 max=0.16145 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.99 KP 1.00 ! LA 0.99 MK 0.97 NL 0.98 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.03 KP 1.03 ! LA 0.95 MK 0.99 NL 0.98 OV 1.01 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 0.98 ! LA 1.00 MK 1.02 NL 1.01 OV 1.03 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 1.02 ! LA 1.01 MK 1.02 NL 1.02 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Fit before self-cal, rms=0.047661Jy sigma=0.814877 ! Fit after self-cal, rms=0.047437Jy sigma=0.810675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.843 mas, bmaj=5.006 mas, bpa=-27.92 degrees ! Estimated noise=0.343424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143083 Jy ! Component: 100 - total flux cleaned = 0.002052 Jy ! Component: 150 - total flux cleaned = 0.00235599 Jy ! Component: 200 - total flux cleaned = 0.00249557 Jy ! Total flux subtracted in 200 components = 0.00249557 Jy ! Clean residual min=-0.001244 max=0.001383 Jy/beam ! Clean residual mean=0.000005 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.178101 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 0.178101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047392Jy sigma=0.809659 ! Fit after self-cal, rms=0.047383Jy sigma=0.809504 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047383Jy sigma=0.809504 ! Fit after self-cal, rms=0.047321Jy sigma=0.804749 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.841 mas, bmaj=5.011 mas, bpa=-29.89 degrees ! Estimated noise=0.344046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816398 Jy ! Component: 100 - total flux cleaned = 0.00111647 Jy ! Component: 150 - total flux cleaned = 0.00129898 Jy ! Component: 200 - total flux cleaned = 0.00132974 Jy ! Total flux subtracted in 200 components = 0.00132974 Jy ! Clean residual min=-0.001067 max=0.001166 Jy/beam ! Clean residual mean=0.000004 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.179431 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.179431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047303Jy sigma=0.804385 ! Fit after self-cal, rms=0.047303Jy sigma=0.804337 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261534 Jy ! Component: 100 - total flux cleaned = 0.000318671 Jy ! Component: 150 - total flux cleaned = 0.00035676 Jy ! Component: 200 - total flux cleaned = 0.000403004 Jy ! Total flux subtracted in 200 components = 0.000403004 Jy ! Clean residual min=-0.001075 max=0.001119 Jy/beam ! Clean residual mean=0.000005 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.179834 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.179834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047296Jy sigma=0.804195 ! Fit after self-cal, rms=0.047296Jy sigma=0.804185 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047296Jy sigma=0.804185 ! Fit after self-cal, rms=0.047324Jy sigma=0.804014 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.843 mas, bmaj=5.011 mas, bpa=-30.26 degrees ! Estimated noise=0.344159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333183 Jy ! Component: 100 - total flux cleaned = 0.000411901 Jy ! Component: 150 - total flux cleaned = 0.000446977 Jy ! Component: 200 - total flux cleaned = 0.000478826 Jy ! Total flux subtracted in 200 components = 0.000478826 Jy ! Clean residual min=-0.001068 max=0.001081 Jy/beam ! Clean residual mean=0.000004 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.180313 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.180313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047318Jy sigma=0.803896 ! Fit after self-cal, rms=0.047318Jy sigma=0.803887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105079 Jy ! Component: 100 - total flux cleaned = 0.000125282 Jy ! Component: 150 - total flux cleaned = 0.000134633 Jy ! Component: 200 - total flux cleaned = 0.000153245 Jy ! Total flux subtracted in 200 components = 0.000153245 Jy ! Clean residual min=-0.001069 max=0.001065 Jy/beam ! Clean residual mean=0.000004 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.180466 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.180466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047314Jy sigma=0.803817 ! Fit after self-cal, rms=0.047314Jy sigma=0.803814 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047314Jy sigma=0.803814 ! Fit after self-cal, rms=0.047331Jy sigma=0.803786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.402 mas, bmaj=9.514 mas, bpa=74.53 degrees ! Estimated noise=0.41199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366629 Jy ! Component: 100 - total flux cleaned = 0.000423594 Jy ! Component: 150 - total flux cleaned = 0.000442815 Jy ! Component: 200 - total flux cleaned = 0.000470916 Jy ! Total flux subtracted in 200 components = 0.000470916 Jy ! Clean residual min=-0.001123 max=0.001400 Jy/beam ! Clean residual mean=0.000007 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.180937 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.180937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047330Jy sigma=0.803771 ! Fit after self-cal, rms=0.047330Jy sigma=0.803765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.72294e-05 Jy ! Component: 100 - total flux cleaned = 4.34383e-05 Jy ! Component: 150 - total flux cleaned = 5.8218e-05 Jy ! Component: 200 - total flux cleaned = 6.25804e-05 Jy ! Total flux subtracted in 200 components = 6.25804e-05 Jy ! Clean residual min=-0.001120 max=0.001393 Jy/beam ! Clean residual mean=0.000007 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.181 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047330Jy sigma=0.803764 ! Fit after self-cal, rms=0.047330Jy sigma=0.803761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.844 mas, bmaj=5.01 mas, bpa=-30.44 degrees ! Estimated noise=0.344269 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.844 x 5.01 at -30.44 degrees (North through East) ! Clean map min=-0.0010359 max=0.16102 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=3.998 mas, bpa=-16.17 degrees ! Estimated noise=0.618699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124637 Jy ! Component: 100 - total flux cleaned = 0.152494 Jy ! Component: 150 - total flux cleaned = 0.161194 Jy ! Component: 200 - total flux cleaned = 0.165742 Jy ! Total flux subtracted in 200 components = 0.165742 Jy ! Clean residual min=-0.002134 max=0.002979 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.165742 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.165742 Jy ! Inverting map and beam ! Estimated beam: bmin=4.844 mas, bmaj=5.01 mas, bpa=-30.44 degrees ! Estimated noise=0.344269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470978 Jy ! Component: 100 - total flux cleaned = 0.00766419 Jy ! Component: 150 - total flux cleaned = 0.0097196 Jy ! Component: 200 - total flux cleaned = 0.0111954 Jy ! Total flux subtracted in 200 components = 0.0111954 Jy ! Clean residual min=-0.001123 max=0.001157 Jy/beam ! Clean residual mean=-0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.176937 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 62 components and 0.176937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.402 mas, bmaj=9.514 mas, bpa=74.53 degrees ! Estimated noise=0.41199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151805 Jy ! Component: 100 - total flux cleaned = 0.00243054 Jy ! Component: 150 - total flux cleaned = 0.00301372 Jy ! Component: 200 - total flux cleaned = 0.00328345 Jy ! Total flux subtracted in 200 components = 0.00328345 Jy ! Clean residual min=-0.001137 max=0.001431 Jy/beam ! Clean residual mean=0.000005 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.180221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170161 Jy ! Component: 100 - total flux cleaned = 0.000296332 Jy ! Component: 150 - total flux cleaned = 0.000398905 Jy ! Component: 200 - total flux cleaned = 0.000442941 Jy ! Total flux subtracted in 200 components = 0.000442941 Jy ! Clean residual min=-0.001109 max=0.001408 Jy/beam ! Clean residual mean=0.000006 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.180664 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 112 components and 0.180664 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.844 mas, bmaj=5.01 mas, bpa=-30.44 degrees ! Estimated noise=0.344269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88299e-05 Jy ! Component: 100 - total flux cleaned = 4.00706e-05 Jy ! Component: 150 - total flux cleaned = -7.84084e-06 Jy ! Component: 200 - total flux cleaned = -3.66964e-05 Jy ! Total flux subtracted in 200 components = -3.66964e-05 Jy ! Clean residual min=-0.001040 max=0.001070 Jy/beam ! Clean residual mean=0.000003 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.180627 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.180627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047335Jy sigma=0.803853 ! Fit after self-cal, rms=0.047334Jy sigma=0.803821 wmodel J1136+7009_S_map.mod ! Writing 131 model components to file: J1136+7009_S_map.mod wobs J1136+7009_S_uvs.fits ! Writing UV FITS file: J1136+7009_S_uvs.fits wwins J1136+7009_S_map.win ! wwins: Wrote 3 windows to J1136+7009_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264856 Jy ! Component: 100 - total flux cleaned = 0.000375537 Jy ! Component: 150 - total flux cleaned = 0.0004643 Jy ! Component: 200 - total flux cleaned = 0.000516421 Jy ! Component: 250 - total flux cleaned = 0.000652011 Jy ! Component: 300 - total flux cleaned = 0.000784479 Jy ! Component: 350 - total flux cleaned = 0.000914656 Jy ! Component: 400 - total flux cleaned = 0.00104289 Jy ! Component: 450 - total flux cleaned = 0.00116884 Jy ! Component: 500 - total flux cleaned = 0.00119982 Jy ! Component: 550 - total flux cleaned = 0.00126108 Jy ! Component: 600 - total flux cleaned = 0.00129115 Jy ! Component: 650 - total flux cleaned = 0.00129141 Jy ! Component: 700 - total flux cleaned = 0.00139524 Jy ! Component: 750 - total flux cleaned = 0.00139521 Jy ! Component: 800 - total flux cleaned = 0.0014245 Jy ! Component: 850 - total flux cleaned = 0.00151059 Jy ! Component: 900 - total flux cleaned = 0.00151052 Jy ! Component: 950 - total flux cleaned = 0.00160896 Jy ! Component: 1000 - total flux cleaned = 0.0016644 Jy ! Component: 1050 - total flux cleaned = 0.00165063 Jy ! Component: 1100 - total flux cleaned = 0.00176002 Jy ! Component: 1150 - total flux cleaned = 0.00182742 Jy ! Component: 1200 - total flux cleaned = 0.00181388 Jy ! Component: 1250 - total flux cleaned = 0.00188043 Jy ! Component: 1300 - total flux cleaned = 0.00191977 Jy ! Component: 1350 - total flux cleaned = 0.00195908 Jy ! Component: 1400 - total flux cleaned = 0.00197204 Jy ! Component: 1450 - total flux cleaned = 0.00201056 Jy ! Component: 1500 - total flux cleaned = 0.00203591 Jy ! Component: 1550 - total flux cleaned = 0.00202341 Jy ! Component: 1600 - total flux cleaned = 0.00207354 Jy ! Component: 1650 - total flux cleaned = 0.00204863 Jy ! Component: 1700 - total flux cleaned = 0.00212257 Jy ! Component: 1750 - total flux cleaned = 0.00202463 Jy ! Component: 1800 - total flux cleaned = 0.0020611 Jy ! Component: 1850 - total flux cleaned = 0.00201277 Jy ! Component: 1900 - total flux cleaned = 0.00200091 Jy ! Component: 1950 - total flux cleaned = 0.00206024 Jy ! Component: 2000 - total flux cleaned = 0.00200115 Jy ! Component: 2050 - total flux cleaned = 0.0020012 Jy ! Component: 2100 - total flux cleaned = 0.00201298 Jy ! Component: 2150 - total flux cleaned = 0.00204753 Jy ! Component: 2200 - total flux cleaned = 0.00204762 Jy ! Component: 2250 - total flux cleaned = 0.00204762 Jy ! Component: 2300 - total flux cleaned = 0.00202489 Jy ! Component: 2350 - total flux cleaned = 0.00203627 Jy ! Component: 2400 - total flux cleaned = 0.00203625 Jy ! Component: 2450 - total flux cleaned = 0.00204757 Jy ! Component: 2500 - total flux cleaned = 0.00204764 Jy ! Component: 2550 - total flux cleaned = 0.00204759 Jy ! Component: 2600 - total flux cleaned = 0.00201462 Jy ! Component: 2650 - total flux cleaned = 0.00203652 Jy ! Component: 2700 - total flux cleaned = 0.00199306 Jy ! Component: 2750 - total flux cleaned = 0.00202558 Jy ! Component: 2800 - total flux cleaned = 0.00203635 Jy ! Component: 2850 - total flux cleaned = 0.00200423 Jy ! Component: 2900 - total flux cleaned = 0.00200425 Jy ! Component: 2950 - total flux cleaned = 0.00200422 Jy ! Component: 3000 - total flux cleaned = 0.00201477 Jy ! Component: 3050 - total flux cleaned = 0.00197282 Jy ! Component: 3100 - total flux cleaned = 0.00203542 Jy ! Component: 3150 - total flux cleaned = 0.00201468 Jy ! Component: 3200 - total flux cleaned = 0.00200429 Jy ! Component: 3250 - total flux cleaned = 0.0019837 Jy ! Component: 3300 - total flux cleaned = 0.00199397 Jy ! Component: 3350 - total flux cleaned = 0.00195337 Jy ! Component: 3400 - total flux cleaned = 0.00195336 Jy ! Component: 3450 - total flux cleaned = 0.00187266 Jy ! Component: 3500 - total flux cleaned = 0.00187273 Jy ! Component: 3550 - total flux cleaned = 0.00187277 Jy ! Component: 3600 - total flux cleaned = 0.00183292 Jy ! Component: 3650 - total flux cleaned = 0.00183291 Jy ! Component: 3700 - total flux cleaned = 0.00186256 Jy ! Component: 3750 - total flux cleaned = 0.00180347 Jy ! Component: 3800 - total flux cleaned = 0.00182305 Jy ! Component: 3850 - total flux cleaned = 0.00179382 Jy ! Component: 3900 - total flux cleaned = 0.00179374 Jy ! Component: 3950 - total flux cleaned = 0.0017357 Jy ! Component: 4000 - total flux cleaned = 0.00166837 Jy ! Component: 4050 - total flux cleaned = 0.0016876 Jy ! Total flux subtracted in 4096 components = 0.00171626 Jy ! Clean residual min=-0.000618 max=0.000618 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.182343 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 439 components and 0.182343 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1136+7009_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.844 x 5.01 at -30.44 degrees (North through East) ! Clean map min=-0.00078631 max=0.16116 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1136+7009_S_map.fits wmodel /scr/pima/rv117_uvs/J1136+7009_S_map.mod ! Writing 439 model components to file: /scr/pima/rv117_uvs/J1136+7009_S_map.mod wobs /scr/pima/rv117_uvs/J1136+7009_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1136+7009_S_uvs.fits wwins /scr/pima/rv117_uvs/J1136+7009_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv117_uvs/J1136+7009_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.16116 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184539 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.34352 0.34352 0.687041 1.37408 2.74816 5.49632 10.9926 21.9853 43.9706 87.9412 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.161 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 873.31 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1136+7009_S_dfm.log closed on Sat Dec 9 23:43:58 2017