! Started logfile: /scr/pima/rv117_uvs/J1036-3744_S_dfm.log on Sat Dec 9 23:43:40 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1036-3744_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1036-3744_S_uva.fits ! AN table 1: 5 integrations on 3 of 3 possible baselines. ! AN table 2: 2 integrations on 21 of 21 possible baselines. ! AN table 3: 6 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.884444 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 796 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1036-3744_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.043480Jy sigma=13.252692 ! Fit after self-cal, rms=0.677126Jy sigma=8.325871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.298 mas, bmaj=5.275 mas, bpa=11.3 degrees ! Estimated noise=2.4993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256007 Jy ! Component: 100 - total flux cleaned = 0.312336 Jy ! Total flux subtracted in 100 components = 0.312336 Jy ! Clean residual min=-0.012511 max=0.028786 Jy/beam ! Clean residual mean=-0.000181 rms=0.003461 Jy/beam ! Combined flux in latest and established models = 0.312336 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.312336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082216Jy sigma=0.982257 ! Fit after self-cal, rms=0.082206Jy sigma=0.982218 ! Inverting map ! Added new window around map position (0.5, 14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240783 Jy ! Component: 100 - total flux cleaned = 0.0346252 Jy ! Total flux subtracted in 100 components = 0.0346252 Jy ! Clean residual min=-0.011039 max=0.019621 Jy/beam ! Clean residual mean=-0.000107 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 0.346961 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.346961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074469Jy sigma=0.857651 ! Fit after self-cal, rms=0.073691Jy sigma=0.844676 ! Inverting map ! Added new window around map position (-6.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166234 Jy ! Component: 100 - total flux cleaned = 0.0225583 Jy ! Total flux subtracted in 100 components = 0.0225583 Jy ! Clean residual min=-0.010511 max=0.015429 Jy/beam ! Clean residual mean=-0.000050 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.36952 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.36952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069623Jy sigma=0.792910 ! Fit after self-cal, rms=0.069042Jy sigma=0.783657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.163 mas, bpa=12.19 degrees ! Estimated noise=2.0575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124951 Jy ! Component: 100 - total flux cleaned = 0.018751 Jy ! Component: 150 - total flux cleaned = 0.020748 Jy ! Component: 200 - total flux cleaned = 0.021694 Jy ! Total flux subtracted in 200 components = 0.021694 Jy ! Clean residual min=-0.008476 max=0.007326 Jy/beam ! Clean residual mean=0.000078 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.391214 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.391214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065892Jy sigma=0.753125 ! Fit after self-cal, rms=0.065892Jy sigma=0.752898 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 6.163 at 12.19 degrees (North through East) ! Clean map min=-0.0079115 max=0.30629 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.29 KP 1.02 LA 1.00 ! NL 0.91 PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.91 KP 1.01 LA 1.00 MK 0.99 ! NL 1.12 OV 0.92 PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.29 KP 1.02 LA 0.97 ! NL 1.02 PT 1.00 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 1.00 LA 0.97 MK 1.00 ! NL 1.10 OV 0.95 PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.24 KP 0.96 LA 1.04 ! NL 1.16 PT 1.07 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 1.02 LA 1.01 MK 1.01 ! NL 1.13 OV 0.98 PT 1.06 SC 1.06 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.32 KP 1.04 LA 1.03 ! NL 0.96 PT 1.05 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.01 LA 0.99 MK 1.05 ! NL 1.14 OV 0.97 PT 1.05 SC 0.99 ! ! ! Fit before self-cal, rms=0.065892Jy sigma=0.752898 ! Fit after self-cal, rms=0.062715Jy sigma=0.672288 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=9.327 mas, bpa=-0.7685 degrees ! Estimated noise=2.15497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310613 Jy ! Component: 100 - total flux cleaned = -0.00399267 Jy ! Component: 150 - total flux cleaned = -0.00445707 Jy ! Component: 200 - total flux cleaned = -0.00469525 Jy ! Total flux subtracted in 200 components = -0.00469525 Jy ! Clean residual min=-0.005558 max=0.005854 Jy/beam ! Clean residual mean=0.000111 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.386518 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.386518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062371Jy sigma=0.667696 ! Fit after self-cal, rms=0.062424Jy sigma=0.667361 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062424Jy sigma=0.667361 ! Fit after self-cal, rms=0.062247Jy sigma=0.658471 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=9.327 mas, bpa=-0.7597 degrees ! Estimated noise=2.15237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192764 Jy ! Component: 100 - total flux cleaned = -0.00228654 Jy ! Component: 150 - total flux cleaned = -0.00253225 Jy ! Component: 200 - total flux cleaned = -0.00270169 Jy ! Total flux subtracted in 200 components = -0.00270169 Jy ! Clean residual min=-0.004940 max=0.005271 Jy/beam ! Clean residual mean=0.000069 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.383817 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.383817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062098Jy sigma=0.656572 ! Fit after self-cal, rms=0.062087Jy sigma=0.656454 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212489 Jy ! Component: 100 - total flux cleaned = -0.000263119 Jy ! Component: 150 - total flux cleaned = -0.000360587 Jy ! Component: 200 - total flux cleaned = -0.000404188 Jy ! Total flux subtracted in 200 components = -0.000404188 Jy ! Clean residual min=-0.004908 max=0.005243 Jy/beam ! Clean residual mean=0.000065 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.383412 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.383412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062005Jy sigma=0.655545 ! Fit after self-cal, rms=0.061998Jy sigma=0.655490 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061998Jy sigma=0.655490 ! Fit after self-cal, rms=0.061634Jy sigma=0.646983 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=9.332 mas, bpa=-0.7631 degrees ! Estimated noise=2.15057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156012 Jy ! Component: 100 - total flux cleaned = -0.0017645 Jy ! Component: 150 - total flux cleaned = -0.001901 Jy ! Component: 200 - total flux cleaned = -0.00202723 Jy ! Total flux subtracted in 200 components = -0.00202723 Jy ! Clean residual min=-0.004873 max=0.005406 Jy/beam ! Clean residual mean=0.000063 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.381385 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.381385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061539Jy sigma=0.645961 ! Fit after self-cal, rms=0.061529Jy sigma=0.645862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225511 Jy ! Component: 100 - total flux cleaned = -0.000304223 Jy ! Component: 150 - total flux cleaned = -0.000341077 Jy ! Component: 200 - total flux cleaned = -0.000412082 Jy ! Total flux subtracted in 200 components = -0.000412082 Jy ! Clean residual min=-0.004865 max=0.005443 Jy/beam ! Clean residual mean=0.000059 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.380973 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.380973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061477Jy sigma=0.645327 ! Fit after self-cal, rms=0.061471Jy sigma=0.645288 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061471Jy sigma=0.645288 ! Fit after self-cal, rms=0.061702Jy sigma=0.645016 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.502 mas, bmaj=25.36 mas, bpa=-2.847 degrees ! Estimated noise=2.67487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175877 Jy ! Component: 100 - total flux cleaned = -0.00215941 Jy ! Component: 150 - total flux cleaned = -0.00231404 Jy ! Component: 200 - total flux cleaned = -0.00239875 Jy ! Total flux subtracted in 200 components = -0.00239875 Jy ! Clean residual min=-0.005047 max=0.005956 Jy/beam ! Clean residual mean=0.000103 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.378574 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.378574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061677Jy sigma=0.644583 ! Fit after self-cal, rms=0.061678Jy sigma=0.644473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027271 Jy ! Component: 100 - total flux cleaned = -0.000332039 Jy ! Component: 150 - total flux cleaned = -0.000332417 Jy ! Component: 200 - total flux cleaned = -0.000331651 Jy ! Total flux subtracted in 200 components = -0.000331651 Jy ! Clean residual min=-0.005051 max=0.005973 Jy/beam ! Clean residual mean=0.000098 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.378243 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 0.378243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061667Jy sigma=0.644426 ! Fit after self-cal, rms=0.061667Jy sigma=0.644397 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=9.338 mas, bpa=-0.7604 degrees ! Estimated noise=2.14951 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 9.338 at -0.7604 degrees (North through East) ! Clean map min=-0.0065168 max=0.31409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=7.314 mas, bpa=0.299 degrees ! Estimated noise=2.64808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262726 Jy ! Component: 100 - total flux cleaned = 0.322604 Jy ! Component: 150 - total flux cleaned = 0.343347 Jy ! Component: 200 - total flux cleaned = 0.354107 Jy ! Total flux subtracted in 200 components = 0.354107 Jy ! Clean residual min=-0.007078 max=0.007127 Jy/beam ! Clean residual mean=-0.000059 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.354107 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.354107 Jy ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=9.338 mas, bpa=-0.7604 degrees ! Estimated noise=2.14951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010566 Jy ! Component: 100 - total flux cleaned = 0.0166534 Jy ! Component: 150 - total flux cleaned = 0.0189101 Jy ! Component: 200 - total flux cleaned = 0.0203876 Jy ! Total flux subtracted in 200 components = 0.0203876 Jy ! Clean residual min=-0.005127 max=0.005386 Jy/beam ! Clean residual mean=0.000009 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.374495 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 44 components and 0.374495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.502 mas, bmaj=25.36 mas, bpa=-2.847 degrees ! Estimated noise=2.67487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302148 Jy ! Component: 100 - total flux cleaned = 0.00338288 Jy ! Component: 150 - total flux cleaned = 0.00359507 Jy ! Component: 200 - total flux cleaned = 0.00371194 Jy ! Total flux subtracted in 200 components = 0.00371194 Jy ! Clean residual min=-0.005250 max=0.005794 Jy/beam ! Clean residual mean=0.000093 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.378207 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83447e-06 Jy ! Component: 100 - total flux cleaned = 3.22765e-06 Jy ! Component: 150 - total flux cleaned = 4.52402e-05 Jy ! Component: 200 - total flux cleaned = 7.77138e-06 Jy ! Total flux subtracted in 200 components = 7.77138e-06 Jy ! Clean residual min=-0.005161 max=0.005789 Jy/beam ! Clean residual mean=0.000096 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.378214 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.378214 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=9.338 mas, bpa=-0.7604 degrees ! Estimated noise=2.14951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.95658e-05 Jy ! Component: 100 - total flux cleaned = -2.74321e-05 Jy ! Component: 150 - total flux cleaned = 1.96237e-05 Jy ! Component: 200 - total flux cleaned = 6.34114e-05 Jy ! Total flux subtracted in 200 components = 6.34114e-05 Jy ! Clean residual min=-0.004806 max=0.005619 Jy/beam ! Clean residual mean=0.000050 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.378278 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.378278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061654Jy sigma=0.645041 ! Fit after self-cal, rms=0.061628Jy sigma=0.644807 wmodel J1036-3744_S_map.mod ! Writing 80 model components to file: J1036-3744_S_map.mod wobs J1036-3744_S_uvs.fits ! Writing UV FITS file: J1036-3744_S_uvs.fits wwins J1036-3744_S_map.win ! wwins: Wrote 4 windows to J1036-3744_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158639 Jy ! Component: 100 - total flux cleaned = 0.0016751 Jy ! Component: 150 - total flux cleaned = 0.00200702 Jy ! Component: 200 - total flux cleaned = 0.00208932 Jy ! Component: 250 - total flux cleaned = 0.00201435 Jy ! Component: 300 - total flux cleaned = 0.00194064 Jy ! Component: 350 - total flux cleaned = 0.00186944 Jy ! Component: 400 - total flux cleaned = 0.00186942 Jy ! Component: 450 - total flux cleaned = 0.00186977 Jy ! Component: 500 - total flux cleaned = 0.00200497 Jy ! Component: 550 - total flux cleaned = 0.00220181 Jy ! Component: 600 - total flux cleaned = 0.00232919 Jy ! Component: 650 - total flux cleaned = 0.00258101 Jy ! Component: 700 - total flux cleaned = 0.00276604 Jy ! Component: 750 - total flux cleaned = 0.00300958 Jy ! Component: 800 - total flux cleaned = 0.00312859 Jy ! Component: 850 - total flux cleaned = 0.00318843 Jy ! Component: 900 - total flux cleaned = 0.00353807 Jy ! Component: 950 - total flux cleaned = 0.0035962 Jy ! Component: 1000 - total flux cleaned = 0.00370977 Jy ! Component: 1050 - total flux cleaned = 0.00376648 Jy ! Component: 1100 - total flux cleaned = 0.00360223 Jy ! Component: 1150 - total flux cleaned = 0.00360402 Jy ! Component: 1200 - total flux cleaned = 0.00376454 Jy ! Component: 1250 - total flux cleaned = 0.00365936 Jy ! Component: 1300 - total flux cleaned = 0.00350384 Jy ! Component: 1350 - total flux cleaned = 0.00365666 Jy ! Component: 1400 - total flux cleaned = 0.00355492 Jy ! Component: 1450 - total flux cleaned = 0.00330376 Jy ! Component: 1500 - total flux cleaned = 0.00335345 Jy ! Component: 1550 - total flux cleaned = 0.00310937 Jy ! Component: 1600 - total flux cleaned = 0.00291572 Jy ! Component: 1650 - total flux cleaned = 0.00272517 Jy ! Component: 1700 - total flux cleaned = 0.00277284 Jy ! Component: 1750 - total flux cleaned = 0.00267952 Jy ! Component: 1800 - total flux cleaned = 0.0027248 Jy ! Component: 1850 - total flux cleaned = 0.00245107 Jy ! Component: 1900 - total flux cleaned = 0.00245101 Jy ! Component: 1950 - total flux cleaned = 0.00236194 Jy ! Component: 2000 - total flux cleaned = 0.00227413 Jy ! Component: 2050 - total flux cleaned = 0.00214391 Jy ! Component: 2100 - total flux cleaned = 0.00210074 Jy ! Component: 2150 - total flux cleaned = 0.00192938 Jy ! Component: 2200 - total flux cleaned = 0.00188737 Jy ! Component: 2250 - total flux cleaned = 0.00155199 Jy ! Component: 2300 - total flux cleaned = 0.00151034 Jy ! Component: 2350 - total flux cleaned = 0.00130471 Jy ! Component: 2400 - total flux cleaned = 0.00122359 Jy ! Component: 2450 - total flux cleaned = 0.00106162 Jy ! Component: 2500 - total flux cleaned = 0.000821135 Jy ! Component: 2550 - total flux cleaned = 0.000544268 Jy ! Component: 2600 - total flux cleaned = 0.0002695 Jy ! Component: 2650 - total flux cleaned = 0.000153321 Jy ! Component: 2700 - total flux cleaned = -3.96827e-05 Jy ! Component: 2750 - total flux cleaned = -0.000307477 Jy ! Component: 2800 - total flux cleaned = -0.000610082 Jy ! Component: 2850 - total flux cleaned = -0.000835022 Jy ! Component: 2900 - total flux cleaned = -0.000909233 Jy ! Component: 2950 - total flux cleaned = -0.00120417 Jy ! Component: 3000 - total flux cleaned = -0.00153272 Jy ! Component: 3050 - total flux cleaned = -0.00167709 Jy ! Component: 3100 - total flux cleaned = -0.0018568 Jy ! Component: 3150 - total flux cleaned = -0.00203536 Jy ! Component: 3200 - total flux cleaned = -0.00238884 Jy ! Component: 3250 - total flux cleaned = -0.00263411 Jy ! Component: 3300 - total flux cleaned = -0.0029469 Jy ! Component: 3350 - total flux cleaned = -0.00301623 Jy ! Component: 3400 - total flux cleaned = -0.00339277 Jy ! Component: 3450 - total flux cleaned = -0.00352843 Jy ! Component: 3500 - total flux cleaned = -0.00376399 Jy ! Component: 3550 - total flux cleaned = -0.00386413 Jy ! Component: 3600 - total flux cleaned = -0.00409651 Jy ! Component: 3650 - total flux cleaned = -0.00439266 Jy ! Component: 3700 - total flux cleaned = -0.00462095 Jy ! Component: 3750 - total flux cleaned = -0.00468561 Jy ! Component: 3800 - total flux cleaned = -0.0049425 Jy ! Component: 3850 - total flux cleaned = -0.00500632 Jy ! Component: 3900 - total flux cleaned = -0.00525967 Jy ! Component: 3950 - total flux cleaned = -0.00544795 Jy ! Component: 4000 - total flux cleaned = -0.00551046 Jy ! Component: 4050 - total flux cleaned = -0.00569655 Jy ! Total flux subtracted in 4096 components = -0.00575784 Jy ! Clean residual min=-0.001948 max=0.001792 Jy/beam ! Clean residual mean=-0.000005 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.37252 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 367 components and 0.37252 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1036-3744_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 9.338 at -0.7604 degrees (North through East) ! Clean map min=-0.0060384 max=0.31608 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1036-3744_S_map.fits wmodel /scr/pima/rv117_uvs/J1036-3744_S_map.mod ! Writing 367 model components to file: /scr/pima/rv117_uvs/J1036-3744_S_map.mod wobs /scr/pima/rv117_uvs/J1036-3744_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1036-3744_S_uvs.fits wwins /scr/pima/rv117_uvs/J1036-3744_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1036-3744_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.316077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000578671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.549238 0.549238 1.09848 2.19695 4.3939 8.7878 17.5756 35.1512 70.3024 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.316 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 546.211 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1036-3744_S_dfm.log closed on Sat Dec 9 23:43:44 2017