! Started logfile: /scr/pima/rv117_uvs/J1029-1852_S_dfm.log on Sat Dec 9 23:43:31 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1029-1852_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1029-1852_S_uva.fits ! AN table 1: 11 integrations on 36 of 36 possible baselines. ! AN table 2: 7 integrations on 21 of 21 possible baselines. ! AN table 3: 13 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.665932 visibilities/baseline/integration-bin. ! Found source: J1029-1852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 2416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1029-1852_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.049400Jy sigma=16.916126 ! Fit after self-cal, rms=0.683684Jy sigma=10.963485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.906 mas, bpa=-6.179 degrees ! Estimated noise=1.37463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23625 Jy ! Component: 100 - total flux cleaned = 0.295142 Jy ! Total flux subtracted in 100 components = 0.295142 Jy ! Clean residual min=-0.008770 max=0.021884 Jy/beam ! Clean residual mean=-0.000030 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 0.295141 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.295141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078355Jy sigma=1.191582 ! Fit after self-cal, rms=0.078344Jy sigma=1.191303 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231132 Jy ! Component: 100 - total flux cleaned = 0.0350625 Jy ! Total flux subtracted in 100 components = 0.0350625 Jy ! Clean residual min=-0.007678 max=0.011601 Jy/beam ! Clean residual mean=-0.000008 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 0.330204 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.330204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066434Jy sigma=1.002129 ! Fit after self-cal, rms=0.066424Jy sigma=1.001878 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=9.263 mas, bpa=-5.555 degrees ! Estimated noise=0.969709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171464 Jy ! Component: 100 - total flux cleaned = 0.0260947 Jy ! Component: 150 - total flux cleaned = 0.0307321 Jy ! Component: 200 - total flux cleaned = 0.0321461 Jy ! Total flux subtracted in 200 components = 0.0321461 Jy ! Clean residual min=-0.007020 max=0.009080 Jy/beam ! Clean residual mean=-0.000025 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.36235 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 59 components and 0.36235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061678Jy sigma=0.929762 ! Fit after self-cal, rms=0.061310Jy sigma=0.924457 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 9.263 at -5.555 degrees (North through East) ! Clean map min=-0.0068351 max=0.30872 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.02 KP 1.00 ! LA 1.03 NL 0.96 OV 0.96 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.94 KP 0.99 LA 1.00 ! MK 0.97 OV 0.99 PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.99 LA 1.00 MK 0.99 ! NL 1.04 OV 1.00 PT 0.96 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.04 KP 1.01 ! LA 1.00 NL 1.02 OV 1.02 PT 0.99 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.73 FD 0.93 KP 1.01 LA 0.97 ! MK 0.98 OV 1.11 PT 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.86 KP 1.03 LA 0.98 MK 1.00 ! NL 1.06 OV 1.06 PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.02 KP 0.99 ! LA 1.01 NL 1.02 OV 1.07 PT 1.06 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.97 KP 0.98 LA 1.01 ! MK 0.98 OV 1.04 PT 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.90 KP 1.02 LA 1.00 MK 1.05 ! NL 1.01 OV 1.04 PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.02 KP 1.05 ! LA 0.98 NL 1.02 OV 1.05 PT 1.04 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 KP 1.02 LA 1.04 ! MK 1.05 OV 0.91 PT 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.83 KP 1.05 LA 1.01 MK 1.06 ! NL 1.01 OV 1.01 PT 1.01 SC 1.03 ! ! ! Fit before self-cal, rms=0.061310Jy sigma=0.924457 ! Fit after self-cal, rms=0.054264Jy sigma=0.847400 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=9.394 mas, bpa=-5.73 degrees ! Estimated noise=0.9757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137521 Jy ! Component: 100 - total flux cleaned = 0.00108213 Jy ! Component: 150 - total flux cleaned = 0.000921302 Jy ! Component: 200 - total flux cleaned = 0.000989278 Jy ! Total flux subtracted in 200 components = 0.000989278 Jy ! Clean residual min=-0.005049 max=0.007816 Jy/beam ! Clean residual mean=0.000012 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.363339 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.363339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053918Jy sigma=0.841640 ! Fit after self-cal, rms=0.053881Jy sigma=0.840932 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053881Jy sigma=0.840932 ! Fit after self-cal, rms=0.053203Jy sigma=0.832073 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=9.403 mas, bpa=-5.703 degrees ! Estimated noise=0.975105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139162 Jy ! Component: 100 - total flux cleaned = 0.00111953 Jy ! Component: 150 - total flux cleaned = 0.00111879 Jy ! Component: 200 - total flux cleaned = 0.00117055 Jy ! Total flux subtracted in 200 components = 0.00117055 Jy ! Clean residual min=-0.004870 max=0.007498 Jy/beam ! Clean residual mean=-0.000007 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.36451 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.36451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053033Jy sigma=0.829315 ! Fit after self-cal, rms=0.053018Jy sigma=0.829123 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709685 Jy ! Component: 100 - total flux cleaned = 0.01087 Jy ! Component: 150 - total flux cleaned = 0.0132996 Jy ! Component: 200 - total flux cleaned = 0.014707 Jy ! Total flux subtracted in 200 components = 0.014707 Jy ! Clean residual min=-0.004717 max=0.004381 Jy/beam ! Clean residual mean=-0.000004 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.379217 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 135 components and 0.379217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052021Jy sigma=0.813810 ! Fit after self-cal, rms=0.051895Jy sigma=0.812491 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051895Jy sigma=0.812491 ! Fit after self-cal, rms=0.051665Jy sigma=0.808486 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=9.422 mas, bpa=-5.771 degrees ! Estimated noise=0.974539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273982 Jy ! Component: 100 - total flux cleaned = 0.00367231 Jy ! Component: 150 - total flux cleaned = 0.00419924 Jy ! Component: 200 - total flux cleaned = 0.00465432 Jy ! Total flux subtracted in 200 components = 0.00465432 Jy ! Clean residual min=-0.004316 max=0.004143 Jy/beam ! Clean residual mean=-0.000006 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.383871 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 162 components and 0.383871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051465Jy sigma=0.805625 ! Fit after self-cal, rms=0.051444Jy sigma=0.805419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715934 Jy ! Component: 100 - total flux cleaned = 0.0010321 Jy ! Component: 150 - total flux cleaned = 0.00119872 Jy ! Component: 200 - total flux cleaned = 0.00139647 Jy ! Total flux subtracted in 200 components = 0.00139647 Jy ! Clean residual min=-0.004201 max=0.004073 Jy/beam ! Clean residual mean=-0.000006 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.385268 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 175 components and 0.385268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051374Jy sigma=0.804422 ! Fit after self-cal, rms=0.051370Jy sigma=0.804385 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051370Jy sigma=0.804385 ! Fit after self-cal, rms=0.051412Jy sigma=0.804004 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.278 mas, bmaj=18.71 mas, bpa=-7.758 degrees ! Estimated noise=1.17794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238572 Jy ! Component: 100 - total flux cleaned = 0.00312563 Jy ! Component: 150 - total flux cleaned = 0.00331322 Jy ! Component: 200 - total flux cleaned = 0.0032756 Jy ! Total flux subtracted in 200 components = 0.0032756 Jy ! Clean residual min=-0.004386 max=0.005001 Jy/beam ! Clean residual mean=-0.000011 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.388543 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 197 components and 0.388543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051397Jy sigma=0.803723 ! Fit after self-cal, rms=0.051378Jy sigma=0.803563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704028 Jy ! Component: 100 - total flux cleaned = 0.000738756 Jy ! Component: 150 - total flux cleaned = 0.000706587 Jy ! Component: 200 - total flux cleaned = 0.000706023 Jy ! Total flux subtracted in 200 components = 0.000706023 Jy ! Clean residual min=-0.004304 max=0.005047 Jy/beam ! Clean residual mean=-0.000011 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.389249 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 207 components and 0.389249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051383Jy sigma=0.803617 ! Fit after self-cal, rms=0.051380Jy sigma=0.803597 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=9.435 mas, bpa=-5.809 degrees ! Estimated noise=0.974963 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 9.435 at -5.809 degrees (North through East) ! Clean map min=-0.0038731 max=0.31058 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.93 mas, bpa=-6.2 degrees ! Estimated noise=1.39314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23796 Jy ! Component: 100 - total flux cleaned = 0.2965 Jy ! Component: 150 - total flux cleaned = 0.319235 Jy ! Component: 200 - total flux cleaned = 0.332832 Jy ! Total flux subtracted in 200 components = 0.332832 Jy ! Clean residual min=-0.007236 max=0.009099 Jy/beam ! Clean residual mean=-0.000010 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.332832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.332832 Jy ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=9.435 mas, bpa=-5.809 degrees ! Estimated noise=0.974963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152787 Jy ! Component: 100 - total flux cleaned = 0.0251839 Jy ! Component: 150 - total flux cleaned = 0.0322419 Jy ! Component: 200 - total flux cleaned = 0.0374712 Jy ! Total flux subtracted in 200 components = 0.0374712 Jy ! Clean residual min=-0.004763 max=0.006319 Jy/beam ! Clean residual mean=-0.000017 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.370303 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 72 components and 0.370303 Jy ! Inverting map ! Added new window around map position (14, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563917 Jy ! Component: 100 - total flux cleaned = 0.00826836 Jy ! Component: 150 - total flux cleaned = 0.0106334 Jy ! Component: 200 - total flux cleaned = 0.0126637 Jy ! Total flux subtracted in 200 components = 0.0126637 Jy ! Clean residual min=-0.003971 max=0.003665 Jy/beam ! Clean residual mean=-0.000012 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.382967 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 114 components and 0.382967 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.278 mas, bmaj=18.71 mas, bpa=-7.758 degrees ! Estimated noise=1.17794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365476 Jy ! Component: 100 - total flux cleaned = 0.00613537 Jy ! Component: 150 - total flux cleaned = 0.00787084 Jy ! Component: 200 - total flux cleaned = 0.00860371 Jy ! Total flux subtracted in 200 components = 0.00860371 Jy ! Clean residual min=-0.003586 max=0.004295 Jy/beam ! Clean residual mean=-0.000015 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.391571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367729 Jy ! Component: 100 - total flux cleaned = 0.00060373 Jy ! Component: 150 - total flux cleaned = 0.000774751 Jy ! Component: 200 - total flux cleaned = 0.000934759 Jy ! Total flux subtracted in 200 components = 0.000934759 Jy ! Clean residual min=-0.003451 max=0.004376 Jy/beam ! Clean residual mean=-0.000014 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.392505 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 167 components and 0.392505 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=9.435 mas, bpa=-5.809 degrees ! Estimated noise=0.974963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245934 Jy ! Component: 100 - total flux cleaned = -0.000369879 Jy ! Component: 150 - total flux cleaned = -0.00036818 Jy ! Component: 200 - total flux cleaned = -0.000367923 Jy ! Total flux subtracted in 200 components = -0.000367923 Jy ! Clean residual min=-0.003502 max=0.003755 Jy/beam ! Clean residual mean=-0.000009 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.392137 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 183 components and 0.392137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051197Jy sigma=0.800720 ! Fit after self-cal, rms=0.051162Jy sigma=0.800257 wmodel J1029-1852_S_map.mod ! Writing 183 model components to file: J1029-1852_S_map.mod wobs J1029-1852_S_uvs.fits ! Writing UV FITS file: J1029-1852_S_uvs.fits wwins J1029-1852_S_map.win ! wwins: Wrote 4 windows to J1029-1852_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266038 Jy ! Component: 100 - total flux cleaned = 0.00015462 Jy ! Component: 150 - total flux cleaned = 0.000157094 Jy ! Component: 200 - total flux cleaned = -0.000141408 Jy ! Component: 250 - total flux cleaned = -0.000188795 Jy ! Component: 300 - total flux cleaned = -5.06067e-05 Jy ! Component: 350 - total flux cleaned = 8.26331e-05 Jy ! Component: 400 - total flux cleaned = 0.000254181 Jy ! Component: 450 - total flux cleaned = 0.000421146 Jy ! Component: 500 - total flux cleaned = 0.000625057 Jy ! Component: 550 - total flux cleaned = 0.00074493 Jy ! Component: 600 - total flux cleaned = 0.000939661 Jy ! Component: 650 - total flux cleaned = 0.00109175 Jy ! Component: 700 - total flux cleaned = 0.00131355 Jy ! Component: 750 - total flux cleaned = 0.00145692 Jy ! Component: 800 - total flux cleaned = 0.00149203 Jy ! Component: 850 - total flux cleaned = 0.00159636 Jy ! Component: 900 - total flux cleaned = 0.00159664 Jy ! Component: 950 - total flux cleaned = 0.00169805 Jy ! Component: 1000 - total flux cleaned = 0.00173062 Jy ! Component: 1050 - total flux cleaned = 0.00186051 Jy ! Component: 1100 - total flux cleaned = 0.00201966 Jy ! Component: 1150 - total flux cleaned = 0.00198814 Jy ! Component: 1200 - total flux cleaned = 0.00217393 Jy ! Component: 1250 - total flux cleaned = 0.00229567 Jy ! Component: 1300 - total flux cleaned = 0.00232563 Jy ! Component: 1350 - total flux cleaned = 0.00235515 Jy ! Component: 1400 - total flux cleaned = 0.0022964 Jy ! Component: 1450 - total flux cleaned = 0.00220968 Jy ! Component: 1500 - total flux cleaned = 0.00232418 Jy ! Component: 1550 - total flux cleaned = 0.00221093 Jy ! Component: 1600 - total flux cleaned = 0.00226725 Jy ! Component: 1650 - total flux cleaned = 0.00210099 Jy ! Component: 1700 - total flux cleaned = 0.00212881 Jy ! Component: 1750 - total flux cleaned = 0.00212928 Jy ! Component: 1800 - total flux cleaned = 0.00212956 Jy ! Component: 1850 - total flux cleaned = 0.00223513 Jy ! Component: 1900 - total flux cleaned = 0.00212979 Jy ! Component: 1950 - total flux cleaned = 0.00210412 Jy ! Component: 2000 - total flux cleaned = 0.00202765 Jy ! Component: 2050 - total flux cleaned = 0.00223075 Jy ! Component: 2100 - total flux cleaned = 0.00215561 Jy ! Component: 2150 - total flux cleaned = 0.00213084 Jy ! Component: 2200 - total flux cleaned = 0.00220466 Jy ! Component: 2250 - total flux cleaned = 0.00218075 Jy ! Component: 2300 - total flux cleaned = 0.00220486 Jy ! Component: 2350 - total flux cleaned = 0.00230066 Jy ! Component: 2400 - total flux cleaned = 0.00222956 Jy ! Component: 2450 - total flux cleaned = 0.00230011 Jy ! Component: 2500 - total flux cleaned = 0.00229999 Jy ! Component: 2550 - total flux cleaned = 0.00234639 Jy ! Component: 2600 - total flux cleaned = 0.00234675 Jy ! Component: 2650 - total flux cleaned = 0.00239177 Jy ! Component: 2700 - total flux cleaned = 0.00239182 Jy ! Component: 2750 - total flux cleaned = 0.00248099 Jy ! Component: 2800 - total flux cleaned = 0.00250294 Jy ! Component: 2850 - total flux cleaned = 0.00254689 Jy ! Component: 2900 - total flux cleaned = 0.00254719 Jy ! Component: 2950 - total flux cleaned = 0.00261203 Jy ! Component: 3000 - total flux cleaned = 0.00261211 Jy ! Component: 3050 - total flux cleaned = 0.0027606 Jy ! Component: 3100 - total flux cleaned = 0.00278162 Jy ! Component: 3150 - total flux cleaned = 0.00282335 Jy ! Component: 3200 - total flux cleaned = 0.00290618 Jy ! Component: 3250 - total flux cleaned = 0.00294715 Jy ! Component: 3300 - total flux cleaned = 0.00298764 Jy ! Component: 3350 - total flux cleaned = 0.00298762 Jy ! Component: 3400 - total flux cleaned = 0.00300766 Jy ! Component: 3450 - total flux cleaned = 0.00302764 Jy ! Component: 3500 - total flux cleaned = 0.00302748 Jy ! Component: 3550 - total flux cleaned = 0.00304717 Jy ! Component: 3600 - total flux cleaned = 0.00304739 Jy ! Component: 3650 - total flux cleaned = 0.00304769 Jy ! Component: 3700 - total flux cleaned = 0.00318207 Jy ! Component: 3750 - total flux cleaned = 0.00314391 Jy ! Component: 3800 - total flux cleaned = 0.003144 Jy ! Component: 3850 - total flux cleaned = 0.00320047 Jy ! Component: 3900 - total flux cleaned = 0.00321916 Jy ! Component: 3950 - total flux cleaned = 0.00327473 Jy ! Component: 4000 - total flux cleaned = 0.00329321 Jy ! Component: 4050 - total flux cleaned = 0.00321993 Jy ! Total flux subtracted in 4096 components = 0.0032745 Jy ! Clean residual min=-0.001194 max=0.000974 Jy/beam ! Clean residual mean=0.000001 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.395412 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 487 components and 0.395412 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1029-1852_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 9.435 at -5.809 degrees (North through East) ! Clean map min=-0.0033768 max=0.31101 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1029-1852_S_map.fits wmodel /scr/pima/rv117_uvs/J1029-1852_S_map.mod ! Writing 487 model components to file: /scr/pima/rv117_uvs/J1029-1852_S_map.mod wobs /scr/pima/rv117_uvs/J1029-1852_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1029-1852_S_uvs.fits wwins /scr/pima/rv117_uvs/J1029-1852_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1029-1852_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.311011 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353117 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.340616 0.340616 0.681232 1.36246 2.72493 5.44986 10.8997 21.7994 43.5989 87.1977 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.311 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 880.756 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1029-1852_S_dfm.log closed on Sat Dec 9 23:43:35 2017