! Started logfile: /scr/pima/rv117_uvs/J0724-0715_S_dfm.log on Sat Dec 9 23:42:50 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J0724-0715_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J0724-0715_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0724-0715 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0724-0715_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.068129Jy sigma=18.388137 ! Fit after self-cal, rms=0.652697Jy sigma=11.322871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=6.46 mas, bpa=-2.354 degrees ! Estimated noise=0.748449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.266509 Jy ! Component: 100 - total flux cleaned = 0.326584 Jy ! Total flux subtracted in 100 components = 0.326584 Jy ! Clean residual min=-0.007471 max=0.021141 Jy/beam ! Clean residual mean=-0.000020 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.326584 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.326584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063565Jy sigma=1.083091 ! Fit after self-cal, rms=0.063552Jy sigma=1.082796 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211377 Jy ! Component: 100 - total flux cleaned = 0.0297729 Jy ! Total flux subtracted in 100 components = 0.0297729 Jy ! Clean residual min=-0.005666 max=0.009514 Jy/beam ! Clean residual mean=-0.000006 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.356356 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 8 components and 0.356356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054673Jy sigma=0.936075 ! Fit after self-cal, rms=0.054590Jy sigma=0.934623 ! Inverting map ! Added new window around map position (4.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860677 Jy ! Component: 100 - total flux cleaned = 0.0134208 Jy ! Total flux subtracted in 100 components = 0.0134208 Jy ! Clean residual min=-0.005473 max=0.005502 Jy/beam ! Clean residual mean=-0.000001 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.369777 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.369777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052801Jy sigma=0.902031 ! Fit after self-cal, rms=0.052711Jy sigma=0.900441 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.632 mas, bpa=-3.095 degrees ! Estimated noise=0.465421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598279 Jy ! Component: 100 - total flux cleaned = 0.00970814 Jy ! Component: 150 - total flux cleaned = 0.0122588 Jy ! Component: 200 - total flux cleaned = 0.01403 Jy ! Total flux subtracted in 200 components = 0.01403 Jy ! Clean residual min=-0.005588 max=0.003913 Jy/beam ! Clean residual mean=0.000001 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.383807 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.383807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051906Jy sigma=0.887929 ! Fit after self-cal, rms=0.051879Jy sigma=0.887415 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.632 at -3.095 degrees (North through East) ! Clean map min=-0.0053268 max=0.34516 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 1.01 KP 1.02 ! LA 1.02 MK 1.01 NL 1.04 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.90 HN 1.03 KP 1.05 ! LA 0.98 MK 1.00 NL 1.03 OV 1.02 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.00 KP 0.99 ! LA 0.99 MK 0.99 NL 0.98 OV 1.03 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.01 KP 1.01 ! LA 0.99 MK 1.00 NL 0.97 OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.051879Jy sigma=0.887415 ! Fit after self-cal, rms=0.048938Jy sigma=0.832815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.649 mas, bpa=-3.108 degrees ! Estimated noise=0.464989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000719235 Jy ! Component: 100 - total flux cleaned = -0.000876241 Jy ! Component: 150 - total flux cleaned = -0.000977154 Jy ! Component: 200 - total flux cleaned = -0.000999345 Jy ! Total flux subtracted in 200 components = -0.000999345 Jy ! Clean residual min=-0.002274 max=0.002429 Jy/beam ! Clean residual mean=-0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.382808 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.382808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048900Jy sigma=0.832286 ! Fit after self-cal, rms=0.048900Jy sigma=0.832168 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048900Jy sigma=0.832168 ! Fit after self-cal, rms=0.048051Jy sigma=0.815349 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.65 mas, bpa=-3.119 degrees ! Estimated noise=0.464768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175361 Jy ! Component: 100 - total flux cleaned = -0.00028194 Jy ! Component: 150 - total flux cleaned = -0.00034812 Jy ! Component: 200 - total flux cleaned = -0.000368131 Jy ! Total flux subtracted in 200 components = -0.000368131 Jy ! Clean residual min=-0.001591 max=0.001636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.38244 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.38244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048025Jy sigma=0.814911 ! Fit after self-cal, rms=0.048025Jy sigma=0.814851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014361 Jy ! Component: 100 - total flux cleaned = 0.00183537 Jy ! Component: 150 - total flux cleaned = 0.00185957 Jy ! Component: 200 - total flux cleaned = 0.00183932 Jy ! Total flux subtracted in 200 components = 0.00183932 Jy ! Clean residual min=-0.001482 max=0.001338 Jy/beam ! Clean residual mean=-0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.384279 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.384279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047983Jy sigma=0.813964 ! Fit after self-cal, rms=0.047980Jy sigma=0.813910 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047980Jy sigma=0.813910 ! Fit after self-cal, rms=0.047977Jy sigma=0.813845 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=7.651 mas, bpa=-3.118 degrees ! Estimated noise=0.464664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022543 Jy ! Component: 100 - total flux cleaned = 0.000204919 Jy ! Component: 150 - total flux cleaned = 0.000187175 Jy ! Component: 200 - total flux cleaned = 0.000154007 Jy ! Total flux subtracted in 200 components = 0.000154007 Jy ! Clean residual min=-0.001473 max=0.001355 Jy/beam ! Clean residual mean=-0.000000 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.384433 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.384433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047963Jy sigma=0.813590 ! Fit after self-cal, rms=0.047963Jy sigma=0.813572 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.35136e-05 Jy ! Component: 100 - total flux cleaned = 4.78549e-05 Jy ! Component: 150 - total flux cleaned = 4.76201e-05 Jy ! Component: 200 - total flux cleaned = 3.44219e-05 Jy ! Total flux subtracted in 200 components = 3.44219e-05 Jy ! Clean residual min=-0.001471 max=0.001355 Jy/beam ! Clean residual mean=-0.000000 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.384467 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 0.384467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047955Jy sigma=0.813429 ! Fit after self-cal, rms=0.047954Jy sigma=0.813418 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047954Jy sigma=0.813418 ! Fit after self-cal, rms=0.047955Jy sigma=0.813400 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.423 mas, bmaj=12.75 mas, bpa=-1 degrees ! Estimated noise=0.584791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317772 Jy ! Component: 100 - total flux cleaned = 0.000316546 Jy ! Component: 150 - total flux cleaned = 0.0003283 Jy ! Component: 200 - total flux cleaned = 0.000328695 Jy ! Total flux subtracted in 200 components = 0.000328695 Jy ! Clean residual min=-0.001629 max=0.001580 Jy/beam ! Clean residual mean=0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.384796 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 0.384796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047951Jy sigma=0.813326 ! Fit after self-cal, rms=0.047950Jy sigma=0.813308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06164e-05 Jy ! Component: 100 - total flux cleaned = 2.0992e-05 Jy ! Component: 150 - total flux cleaned = 2.08735e-05 Jy ! Component: 200 - total flux cleaned = 2.10919e-05 Jy ! Total flux subtracted in 200 components = 2.10919e-05 Jy ! Clean residual min=-0.001615 max=0.001572 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.384817 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.384817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047949Jy sigma=0.813274 ! Fit after self-cal, rms=0.047947Jy sigma=0.813260 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.651 mas, bpa=-3.118 degrees ! Estimated noise=0.464637 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 7.651 at -3.118 degrees (North through East) ! Clean map min=-0.0013605 max=0.3447 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=6.472 mas, bpa=-2.389 degrees ! Estimated noise=0.748729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26655 Jy ! Component: 100 - total flux cleaned = 0.327079 Jy ! Component: 150 - total flux cleaned = 0.348728 Jy ! Component: 200 - total flux cleaned = 0.358769 Jy ! Total flux subtracted in 200 components = 0.358769 Jy ! Clean residual min=-0.003309 max=0.004849 Jy/beam ! Clean residual mean=-0.000007 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.358769 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.358769 Jy ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.651 mas, bpa=-3.118 degrees ! Estimated noise=0.464637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086832 Jy ! Component: 100 - total flux cleaned = 0.0138664 Jy ! Component: 150 - total flux cleaned = 0.0172093 Jy ! Component: 200 - total flux cleaned = 0.0195536 Jy ! Total flux subtracted in 200 components = 0.0195536 Jy ! Clean residual min=-0.001656 max=0.001735 Jy/beam ! Clean residual mean=-0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.378323 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 68 components and 0.378323 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.423 mas, bmaj=12.75 mas, bpa=-1 degrees ! Estimated noise=0.584791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265659 Jy ! Component: 100 - total flux cleaned = 0.00415876 Jy ! Component: 150 - total flux cleaned = 0.00511082 Jy ! Component: 200 - total flux cleaned = 0.00573369 Jy ! Total flux subtracted in 200 components = 0.00573369 Jy ! Clean residual min=-0.001684 max=0.001642 Jy/beam ! Clean residual mean=-0.000000 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.384056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202451 Jy ! Component: 100 - total flux cleaned = 0.000353487 Jy ! Component: 150 - total flux cleaned = 0.000417816 Jy ! Component: 200 - total flux cleaned = 0.000464075 Jy ! Total flux subtracted in 200 components = 0.000464075 Jy ! Clean residual min=-0.001629 max=0.001581 Jy/beam ! Clean residual mean=0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.38452 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 119 components and 0.38452 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.651 mas, bpa=-3.118 degrees ! Estimated noise=0.464637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.10033e-05 Jy ! Component: 100 - total flux cleaned = -6.13469e-05 Jy ! Component: 150 - total flux cleaned = -3.57505e-05 Jy ! Component: 200 - total flux cleaned = -5.76883e-05 Jy ! Total flux subtracted in 200 components = -5.76883e-05 Jy ! Clean residual min=-0.001405 max=0.001348 Jy/beam ! Clean residual mean=-0.000000 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.384463 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 137 components and 0.384463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047960Jy sigma=0.813463 ! Fit after self-cal, rms=0.047953Jy sigma=0.813389 wmodel J0724-0715_S_map.mod ! Writing 137 model components to file: J0724-0715_S_map.mod wobs J0724-0715_S_uvs.fits ! Writing UV FITS file: J0724-0715_S_uvs.fits wwins J0724-0715_S_map.win ! wwins: Wrote 3 windows to J0724-0715_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000431053 Jy ! Component: 100 - total flux cleaned = -0.000455372 Jy ! Component: 150 - total flux cleaned = -0.000362418 Jy ! Component: 200 - total flux cleaned = -0.000295361 Jy ! Component: 250 - total flux cleaned = -0.000251791 Jy ! Component: 300 - total flux cleaned = -0.000251677 Jy ! Component: 350 - total flux cleaned = -0.000211199 Jy ! Component: 400 - total flux cleaned = -0.000250699 Jy ! Component: 450 - total flux cleaned = -0.000250716 Jy ! Component: 500 - total flux cleaned = -0.000325985 Jy ! Component: 550 - total flux cleaned = -0.000344627 Jy ! Component: 600 - total flux cleaned = -0.000398673 Jy ! Component: 650 - total flux cleaned = -0.000327498 Jy ! Component: 700 - total flux cleaned = -0.000327714 Jy ! Component: 750 - total flux cleaned = -0.000379415 Jy ! Component: 800 - total flux cleaned = -0.000328481 Jy ! Component: 850 - total flux cleaned = -0.000328718 Jy ! Component: 900 - total flux cleaned = -0.00037828 Jy ! Component: 950 - total flux cleaned = -0.000394139 Jy ! Component: 1000 - total flux cleaned = -0.000426125 Jy ! Component: 1050 - total flux cleaned = -0.000426073 Jy ! Component: 1100 - total flux cleaned = -0.000378856 Jy ! Component: 1150 - total flux cleaned = -0.000410281 Jy ! Component: 1200 - total flux cleaned = -0.00045655 Jy ! Component: 1250 - total flux cleaned = -0.000486581 Jy ! Component: 1300 - total flux cleaned = -0.000516251 Jy ! Component: 1350 - total flux cleaned = -0.000471929 Jy ! Component: 1400 - total flux cleaned = -0.000471846 Jy ! Component: 1450 - total flux cleaned = -0.000515109 Jy ! Component: 1500 - total flux cleaned = -0.000443656 Jy ! Component: 1550 - total flux cleaned = -0.000471975 Jy ! Component: 1600 - total flux cleaned = -0.000500045 Jy ! Component: 1650 - total flux cleaned = -0.000527443 Jy ! Component: 1700 - total flux cleaned = -0.000541194 Jy ! Component: 1750 - total flux cleaned = -0.000540957 Jy ! Component: 1800 - total flux cleaned = -0.00056787 Jy ! Component: 1850 - total flux cleaned = -0.000581267 Jy ! Component: 1900 - total flux cleaned = -0.000620633 Jy ! Component: 1950 - total flux cleaned = -0.0006597 Jy ! Component: 2000 - total flux cleaned = -0.000633681 Jy ! Component: 2050 - total flux cleaned = -0.000697661 Jy ! Component: 2100 - total flux cleaned = -0.00071027 Jy ! Component: 2150 - total flux cleaned = -0.00069766 Jy ! Component: 2200 - total flux cleaned = -0.000722613 Jy ! Component: 2250 - total flux cleaned = -0.000759654 Jy ! Component: 2300 - total flux cleaned = -0.000796313 Jy ! Component: 2350 - total flux cleaned = -0.000808492 Jy ! Component: 2400 - total flux cleaned = -0.000784276 Jy ! Component: 2450 - total flux cleaned = -0.000808378 Jy ! Component: 2500 - total flux cleaned = -0.000820308 Jy ! Component: 2550 - total flux cleaned = -0.000890984 Jy ! Component: 2600 - total flux cleaned = -0.000820511 Jy ! Component: 2650 - total flux cleaned = -0.00082053 Jy ! Component: 2700 - total flux cleaned = -0.000855212 Jy ! Component: 2750 - total flux cleaned = -0.000855119 Jy ! Component: 2800 - total flux cleaned = -0.000866492 Jy ! Component: 2850 - total flux cleaned = -0.00087776 Jy ! Component: 2900 - total flux cleaned = -0.000911585 Jy ! Component: 2950 - total flux cleaned = -0.000911695 Jy ! Component: 3000 - total flux cleaned = -0.000900575 Jy ! Component: 3050 - total flux cleaned = -0.000911632 Jy ! Component: 3100 - total flux cleaned = -0.000922596 Jy ! Component: 3150 - total flux cleaned = -0.000933409 Jy ! Component: 3200 - total flux cleaned = -0.000933484 Jy ! Component: 3250 - total flux cleaned = -0.000911907 Jy ! Component: 3300 - total flux cleaned = -0.000933274 Jy ! Component: 3350 - total flux cleaned = -0.000944065 Jy ! Component: 3400 - total flux cleaned = -0.000880665 Jy ! Component: 3450 - total flux cleaned = -0.000922799 Jy ! Component: 3500 - total flux cleaned = -0.000922825 Jy ! Component: 3550 - total flux cleaned = -0.000912539 Jy ! Component: 3600 - total flux cleaned = -0.000860842 Jy ! Component: 3650 - total flux cleaned = -0.000840275 Jy ! Component: 3700 - total flux cleaned = -0.000860763 Jy ! Component: 3750 - total flux cleaned = -0.000870892 Jy ! Component: 3800 - total flux cleaned = -0.000840584 Jy ! Component: 3850 - total flux cleaned = -0.000850666 Jy ! Component: 3900 - total flux cleaned = -0.000820697 Jy ! Component: 3950 - total flux cleaned = -0.000780849 Jy ! Component: 4000 - total flux cleaned = -0.000850192 Jy ! Component: 4050 - total flux cleaned = -0.000801052 Jy ! Total flux subtracted in 4096 components = -0.000781369 Jy ! Clean residual min=-0.000603 max=0.000616 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.383681 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 449 components and 0.383681 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J0724-0715_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 7.651 at -3.118 degrees (North through East) ! Clean map min=-0.00096375 max=0.34433 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J0724-0715_S_map.fits wmodel /scr/pima/rv117_uvs/J0724-0715_S_map.mod ! Writing 449 model components to file: /scr/pima/rv117_uvs/J0724-0715_S_map.mod wobs /scr/pima/rv117_uvs/J0724-0715_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J0724-0715_S_uvs.fits wwins /scr/pima/rv117_uvs/J0724-0715_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv117_uvs/J0724-0715_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.344328 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.156753 0.156753 0.313505 0.62701 1.25402 2.50804 5.01608 10.0322 20.0643 40.1287 80.2573 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.344 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1913.84 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J0724-0715_S_dfm.log closed on Sat Dec 9 23:42:55 2017