! Started logfile: /scr/pima/rv117_uvs/J0529-0519_S_dfm.log on Sat Dec 9 23:42:19 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J0529-0519_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J0529-0519_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.987879 visibilities/baseline/integration-bin. ! Found source: J0529-0519 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7824 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0529-0519_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002995Jy sigma=17.856236 ! Fit after self-cal, rms=0.925740Jy sigma=16.499567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.588 mas, bpa=-2.659 degrees ! Estimated noise=0.730053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054039 Jy ! Component: 100 - total flux cleaned = 0.0705866 Jy ! Total flux subtracted in 100 components = 0.0705866 Jy ! Clean residual min=-0.004013 max=0.007331 Jy/beam ! Clean residual mean=0.000000 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.0705866 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0705866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051028Jy sigma=0.885034 ! Fit after self-cal, rms=0.050969Jy sigma=0.883919 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857903 Jy ! Component: 100 - total flux cleaned = 0.0134614 Jy ! Total flux subtracted in 100 components = 0.0134614 Jy ! Clean residual min=-0.003073 max=0.005136 Jy/beam ! Clean residual mean=0.000002 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.084048 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.084048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048793Jy sigma=0.840686 ! Fit after self-cal, rms=0.048790Jy sigma=0.840411 ! Inverting map ! Added new window around map position (4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467902 Jy ! Component: 100 - total flux cleaned = 0.00755537 Jy ! Total flux subtracted in 100 components = 0.00755537 Jy ! Clean residual min=-0.002845 max=0.002607 Jy/beam ! Clean residual mean=0.000003 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0916034 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.0916034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048137Jy sigma=0.827644 ! Fit after self-cal, rms=0.048114Jy sigma=0.827243 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.594 mas, bpa=-2.607 degrees ! Estimated noise=0.456695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366921 Jy ! Component: 100 - total flux cleaned = 0.005732 Jy ! Component: 150 - total flux cleaned = 0.00705908 Jy ! Component: 200 - total flux cleaned = 0.00793534 Jy ! Total flux subtracted in 200 components = 0.00793534 Jy ! Clean residual min=-0.002239 max=0.001814 Jy/beam ! Clean residual mean=0.000008 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0995387 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.0995387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047831Jy sigma=0.821789 ! Fit after self-cal, rms=0.047819Jy sigma=0.821510 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.288 x 7.594 at -2.607 degrees (North through East) ! Clean map min=-0.0021238 max=0.073218 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.05 KP 1.03 ! LA 0.98 MK 1.02 NL 1.04 OV 1.02 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.02 KP 1.02 ! LA 0.96 MK 0.98 NL 1.02 OV 1.03 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 0.97 KP 0.99 ! LA 0.99 MK 1.03 NL 1.04 OV 1.02 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.03 KP 0.99 ! LA 0.99 MK 0.93 NL 1.03 OV 1.01 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.047819Jy sigma=0.821510 ! Fit after self-cal, rms=0.047672Jy sigma=0.819062 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.61 mas, bpa=-2.678 degrees ! Estimated noise=0.455415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239392 Jy ! Component: 100 - total flux cleaned = 0.000230237 Jy ! Component: 150 - total flux cleaned = 0.00022197 Jy ! Component: 200 - total flux cleaned = 0.000206463 Jy ! Total flux subtracted in 200 components = 0.000206463 Jy ! Clean residual min=-0.001911 max=0.001678 Jy/beam ! Clean residual mean=0.000005 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0997452 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.0997452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047668Jy sigma=0.819003 ! Fit after self-cal, rms=0.047678Jy sigma=0.818946 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047678Jy sigma=0.818946 ! Fit after self-cal, rms=0.047702Jy sigma=0.816227 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.615 mas, bpa=-2.634 degrees ! Estimated noise=0.45529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.68835e-05 Jy ! Component: 100 - total flux cleaned = 2.67918e-05 Jy ! Component: 150 - total flux cleaned = 3.41064e-05 Jy ! Component: 200 - total flux cleaned = 3.37923e-05 Jy ! Total flux subtracted in 200 components = 3.37923e-05 Jy ! Clean residual min=-0.001888 max=0.001482 Jy/beam ! Clean residual mean=0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.099779 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 87 components and 0.099779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047699Jy sigma=0.816180 ! Fit after self-cal, rms=0.047706Jy sigma=0.816125 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61865e-05 Jy ! Component: 100 - total flux cleaned = -2.33833e-05 Jy ! Component: 150 - total flux cleaned = -2.91771e-05 Jy ! Component: 200 - total flux cleaned = -2.91491e-05 Jy ! Total flux subtracted in 200 components = -2.91491e-05 Jy ! Clean residual min=-0.001896 max=0.001473 Jy/beam ! Clean residual mean=0.000002 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0997498 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.0997498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047704Jy sigma=0.816098 ! Fit after self-cal, rms=0.047704Jy sigma=0.816095 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047704Jy sigma=0.816095 ! Fit after self-cal, rms=0.047653Jy sigma=0.816088 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=7.611 mas, bpa=-2.635 degrees ! Estimated noise=0.454899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28602e-05 Jy ! Component: 100 - total flux cleaned = 4.26377e-05 Jy ! Component: 150 - total flux cleaned = 4.24405e-05 Jy ! Component: 200 - total flux cleaned = 4.23101e-05 Jy ! Total flux subtracted in 200 components = 4.23101e-05 Jy ! Clean residual min=-0.001900 max=0.001462 Jy/beam ! Clean residual mean=0.000002 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0997922 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.0997922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047652Jy sigma=0.816062 ! Fit after self-cal, rms=0.047652Jy sigma=0.816058 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24045e-07 Jy ! Component: 100 - total flux cleaned = 4.75837e-06 Jy ! Component: 150 - total flux cleaned = -9.63955e-08 Jy ! Component: 200 - total flux cleaned = -2.05523e-09 Jy ! Total flux subtracted in 200 components = -2.05523e-09 Jy ! Clean residual min=-0.001900 max=0.001456 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0997922 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.0997922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047651Jy sigma=0.816043 ! Fit after self-cal, rms=0.047651Jy sigma=0.816040 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047651Jy sigma=0.816040 ! Fit after self-cal, rms=0.047615Jy sigma=0.816039 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=12.41 mas, bpa=-0.5522 degrees ! Estimated noise=0.571273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032272 Jy ! Component: 100 - total flux cleaned = 0.000309974 Jy ! Component: 150 - total flux cleaned = 0.000293883 Jy ! Component: 200 - total flux cleaned = 0.000283828 Jy ! Total flux subtracted in 200 components = 0.000283828 Jy ! Clean residual min=-0.001667 max=0.001729 Jy/beam ! Clean residual mean=0.000004 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.100076 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.100076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047619Jy sigma=0.816094 ! Fit after self-cal, rms=0.047617Jy sigma=0.816083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.83348e-05 Jy ! Component: 100 - total flux cleaned = 2.87158e-05 Jy ! Component: 150 - total flux cleaned = 3.32219e-05 Jy ! Component: 200 - total flux cleaned = 3.31155e-05 Jy ! Total flux subtracted in 200 components = 3.31155e-05 Jy ! Clean residual min=-0.001679 max=0.001719 Jy/beam ! Clean residual mean=0.000004 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.100109 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.100109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047619Jy sigma=0.816117 ! Fit after self-cal, rms=0.047619Jy sigma=0.816116 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.608 mas, bpa=-2.643 degrees ! Estimated noise=0.454679 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.608 at -2.643 degrees (North through East) ! Clean map min=-0.0017791 max=0.072907 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=6.599 mas, bpa=-2.725 degrees ! Estimated noise=0.728147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538466 Jy ! Component: 100 - total flux cleaned = 0.0708238 Jy ! Component: 150 - total flux cleaned = 0.0796851 Jy ! Component: 200 - total flux cleaned = 0.0853114 Jy ! Total flux subtracted in 200 components = 0.0853114 Jy ! Clean residual min=-0.003024 max=0.003040 Jy/beam ! Clean residual mean=-0.000000 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0853114 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0853114 Jy ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.608 mas, bpa=-2.643 degrees ! Estimated noise=0.454679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058576 Jy ! Component: 100 - total flux cleaned = 0.00914318 Jy ! Component: 150 - total flux cleaned = 0.0111542 Jy ! Component: 200 - total flux cleaned = 0.0124327 Jy ! Total flux subtracted in 200 components = 0.0124327 Jy ! Clean residual min=-0.001969 max=0.001425 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0977441 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 67 components and 0.0977441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=12.41 mas, bpa=-0.5522 degrees ! Estimated noise=0.571273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142249 Jy ! Component: 100 - total flux cleaned = 0.00206056 Jy ! Component: 150 - total flux cleaned = 0.00215262 Jy ! Component: 200 - total flux cleaned = 0.00221285 Jy ! Total flux subtracted in 200 components = 0.00221285 Jy ! Clean residual min=-0.001695 max=0.001706 Jy/beam ! Clean residual mean=0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0999569 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.83086e-05 Jy ! Component: 100 - total flux cleaned = 8.70176e-05 Jy ! Component: 150 - total flux cleaned = 0.00011271 Jy ! Component: 200 - total flux cleaned = 0.000128933 Jy ! Total flux subtracted in 200 components = 0.000128933 Jy ! Clean residual min=-0.001698 max=0.001703 Jy/beam ! Clean residual mean=0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.100086 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 0.100086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.608 mas, bpa=-2.643 degrees ! Estimated noise=0.454679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388938 Jy ! Component: 100 - total flux cleaned = -0.000391872 Jy ! Component: 150 - total flux cleaned = -0.000391764 Jy ! Component: 200 - total flux cleaned = -0.000381687 Jy ! Total flux subtracted in 200 components = -0.000381687 Jy ! Clean residual min=-0.001912 max=0.001464 Jy/beam ! Clean residual mean=0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0997042 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.0997042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047618Jy sigma=0.816148 ! Fit after self-cal, rms=0.047617Jy sigma=0.816100 wmodel J0529-0519_S_map.mod ! Writing 102 model components to file: J0529-0519_S_map.mod wobs J0529-0519_S_uvs.fits ! Writing UV FITS file: J0529-0519_S_uvs.fits wwins J0529-0519_S_map.win ! wwins: Wrote 2 windows to J0529-0519_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000638316 Jy ! Component: 100 - total flux cleaned = -0.00107629 Jy ! Component: 150 - total flux cleaned = -0.00131821 Jy ! Component: 200 - total flux cleaned = -0.00136473 Jy ! Component: 250 - total flux cleaned = -0.00134293 Jy ! Component: 300 - total flux cleaned = -0.00134276 Jy ! Component: 350 - total flux cleaned = -0.00128119 Jy ! Component: 400 - total flux cleaned = -0.00126126 Jy ! Component: 450 - total flux cleaned = -0.00116337 Jy ! Component: 500 - total flux cleaned = -0.00108705 Jy ! Component: 550 - total flux cleaned = -0.00104963 Jy ! Component: 600 - total flux cleaned = -0.00103102 Jy ! Component: 650 - total flux cleaned = -0.00099489 Jy ! Component: 700 - total flux cleaned = -0.000995018 Jy ! Component: 750 - total flux cleaned = -0.000942484 Jy ! Component: 800 - total flux cleaned = -0.000873646 Jy ! Component: 850 - total flux cleaned = -0.000772014 Jy ! Component: 900 - total flux cleaned = -0.000755527 Jy ! Component: 950 - total flux cleaned = -0.000640153 Jy ! Component: 1000 - total flux cleaned = -0.000607713 Jy ! Component: 1050 - total flux cleaned = -0.000511644 Jy ! Component: 1100 - total flux cleaned = -0.000416994 Jy ! Component: 1150 - total flux cleaned = -0.000339093 Jy ! Component: 1200 - total flux cleaned = -0.000277337 Jy ! Component: 1250 - total flux cleaned = -0.000277282 Jy ! Component: 1300 - total flux cleaned = -0.00021702 Jy ! Component: 1350 - total flux cleaned = -0.000143003 Jy ! Component: 1400 - total flux cleaned = -0.00020164 Jy ! Component: 1450 - total flux cleaned = -0.000143602 Jy ! Component: 1500 - total flux cleaned = -0.000129568 Jy ! Component: 1550 - total flux cleaned = -0.000129528 Jy ! Component: 1600 - total flux cleaned = -5.95048e-05 Jy ! Component: 1650 - total flux cleaned = -0.000100994 Jy ! Component: 1700 - total flux cleaned = -4.54117e-06 Jy ! Component: 1750 - total flux cleaned = -5.92895e-05 Jy ! Component: 1800 - total flux cleaned = -3.20654e-05 Jy ! Component: 1850 - total flux cleaned = -3.18438e-05 Jy ! Component: 1900 - total flux cleaned = 2.11939e-05 Jy ! Component: 1950 - total flux cleaned = 7.35835e-05 Jy ! Component: 2000 - total flux cleaned = 8.65836e-05 Jy ! Component: 2050 - total flux cleaned = 6.08644e-05 Jy ! Component: 2100 - total flux cleaned = 0.0001381 Jy ! Component: 2150 - total flux cleaned = 0.000163744 Jy ! Component: 2200 - total flux cleaned = 0.00018909 Jy ! Component: 2250 - total flux cleaned = 0.000251801 Jy ! Component: 2300 - total flux cleaned = 0.000227122 Jy ! Component: 2350 - total flux cleaned = 0.000301207 Jy ! Component: 2400 - total flux cleaned = 0.000350088 Jy ! Component: 2450 - total flux cleaned = 0.000374283 Jy ! Component: 2500 - total flux cleaned = 0.000410449 Jy ! Component: 2550 - total flux cleaned = 0.00044635 Jy ! Component: 2600 - total flux cleaned = 0.000446395 Jy ! Component: 2650 - total flux cleaned = 0.000469869 Jy ! Component: 2700 - total flux cleaned = 0.000481666 Jy ! Component: 2750 - total flux cleaned = 0.000528229 Jy ! Component: 2800 - total flux cleaned = 0.00052827 Jy ! Component: 2850 - total flux cleaned = 0.000585415 Jy ! Component: 2900 - total flux cleaned = 0.00057415 Jy ! Component: 2950 - total flux cleaned = 0.000619453 Jy ! Component: 3000 - total flux cleaned = 0.000597119 Jy ! Component: 3050 - total flux cleaned = 0.000619343 Jy ! Component: 3100 - total flux cleaned = 0.000630442 Jy ! Component: 3150 - total flux cleaned = 0.000685356 Jy ! Component: 3200 - total flux cleaned = 0.00065262 Jy ! Component: 3250 - total flux cleaned = 0.000717637 Jy ! Component: 3300 - total flux cleaned = 0.000717506 Jy ! Component: 3350 - total flux cleaned = 0.000738896 Jy ! Component: 3400 - total flux cleaned = 0.000728312 Jy ! Component: 3450 - total flux cleaned = 0.000728333 Jy ! Component: 3500 - total flux cleaned = 0.00075985 Jy ! Component: 3550 - total flux cleaned = 0.000801648 Jy ! Component: 3600 - total flux cleaned = 0.000801615 Jy ! Component: 3650 - total flux cleaned = 0.000822147 Jy ! Component: 3700 - total flux cleaned = 0.000842475 Jy ! Component: 3750 - total flux cleaned = 0.000822025 Jy ! Component: 3800 - total flux cleaned = 0.000811838 Jy ! Component: 3850 - total flux cleaned = 0.000801808 Jy ! Component: 3900 - total flux cleaned = 0.000811792 Jy ! Component: 3950 - total flux cleaned = 0.000841678 Jy ! Component: 4000 - total flux cleaned = 0.000811959 Jy ! Component: 4050 - total flux cleaned = 0.000802123 Jy ! Total flux subtracted in 4096 components = 0.000821681 Jy ! Clean residual min=-0.000584 max=0.000559 Jy/beam ! Clean residual mean=0.000002 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.100526 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 424 components and 0.100526 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J0529-0519_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.608 at -2.643 degrees (North through East) ! Clean map min=-0.0014014 max=0.072825 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J0529-0519_S_map.fits wmodel /scr/pima/rv117_uvs/J0529-0519_S_map.mod ! Writing 424 model components to file: /scr/pima/rv117_uvs/J0529-0519_S_map.mod wobs /scr/pima/rv117_uvs/J0529-0519_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J0529-0519_S_uvs.fits wwins /scr/pima/rv117_uvs/J0529-0519_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv117_uvs/J0529-0519_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0728251 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000177688 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.731979 0.731979 1.46396 2.92791 5.85583 11.7117 23.4233 46.8466 93.6933 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.072 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 409.848 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J0529-0519_S_dfm.log closed on Sat Dec 9 23:42:23 2017