! Started logfile: /scr/pima/rv117_uvs/J0526-4830_S_dfm.log on Sat Dec  9 23:42:15 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv117_uvs/J0526-4830_S_uva.fits
! Reading UV FITS file: /scr/pima/rv117_uvs/J0526-4830_S_uva.fits
! AN table 1: 4 integrations on 3 of 3 possible baselines.
! AN table 2: 12 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.714286 visibilities/baseline/integration-bin.
! Found source: J0526-4830
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 240 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0526-4830_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.026837Jy  sigma=13.038441
! Fit after  self-cal, rms=0.741666Jy  sigma=9.357875
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.379 mas, bmaj=10.44 mas, bpa=-13.38 degrees
! Estimated noise=4.941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193942 Jy
! Component: 100  -  total flux cleaned = 0.236491 Jy
! Total flux subtracted in 100 components = 0.236491 Jy
! Clean residual min=-0.017624 max=0.017819 Jy/beam
! Clean residual mean=0.000003 rms=0.005113 Jy/beam
! Combined flux in latest and established models = 0.236491 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.236491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070690Jy  sigma=0.897906
! Fit after  self-cal, rms=0.070688Jy  sigma=0.897856
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=14.48 mas, bpa=-12.16 degrees
! Estimated noise=3.63234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269347 Jy
! Component: 100  -  total flux cleaned = 0.0390032 Jy
! Component: 150  -  total flux cleaned = 0.0445242 Jy
! Component: 200  -  total flux cleaned = 0.0470756 Jy
! Total flux subtracted in 200 components = 0.0470756 Jy
! Clean residual min=-0.009695 max=0.011555 Jy/beam
! Clean residual mean=-0.000079 rms=0.002730 Jy/beam
! Combined flux in latest and established models = 0.283566 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 57 components and 0.283566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061413Jy  sigma=0.774620
! Fit after  self-cal, rms=0.061414Jy  sigma=0.774211
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.042 x 14.48 at -12.16 degrees (North through East)
! Clean map  min=-0.0094736  max=0.25761 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    SC        0.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.89     KP        0.97     MK        0.95     PT        1.01     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    SC        0.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.18     KP        0.98     MK        0.91     PT        1.11     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    SC        0.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.92     KP        1.10     MK        1.03     PT        1.06     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    SC        0.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.06     MK        1.08     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.061414Jy  sigma=0.774211
! Fit after  self-cal, rms=0.057757Jy  sigma=0.705715
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.772 mas, bmaj=50.84 mas, bpa=-12.48 degrees
! Estimated noise=5.8506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274756 Jy
! Component: 100  -  total flux cleaned = 0.000391353 Jy
! Component: 150  -  total flux cleaned = 0.000506936 Jy
! Component: 200  -  total flux cleaned = 0.000510895 Jy
! Total flux subtracted in 200 components = 0.000510895 Jy
! Clean residual min=-0.009133 max=0.009614 Jy/beam
! Clean residual mean=-0.000088 rms=0.002877 Jy/beam
! Combined flux in latest and established models = 0.284077 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 66 components and 0.284077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057646Jy  sigma=0.704410
! Fit after  self-cal, rms=0.057717Jy  sigma=0.704046
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057717Jy  sigma=0.704046
! Fit after  self-cal, rms=0.057731Jy  sigma=0.703980
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=50.81 mas, bpa=-12.48 degrees
! Estimated noise=5.85407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311094 Jy
! Component: 100  -  total flux cleaned = 0.000358719 Jy
! Component: 150  -  total flux cleaned = 0.000413973 Jy
! Component: 200  -  total flux cleaned = 0.000459183 Jy
! Total flux subtracted in 200 components = 0.000459183 Jy
! Clean residual min=-0.009172 max=0.009226 Jy/beam
! Clean residual mean=-0.000080 rms=0.002803 Jy/beam
! Combined flux in latest and established models = 0.284536 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 70 components and 0.284536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057645Jy  sigma=0.703012
! Fit after  self-cal, rms=0.057640Jy  sigma=0.702965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012409 Jy
! Component: 100  -  total flux cleaned = 3.73319e-05 Jy
! Component: 150  -  total flux cleaned = 7.26564e-05 Jy
! Component: 200  -  total flux cleaned = 0.00010806 Jy
! Total flux subtracted in 200 components = 0.00010806 Jy
! Clean residual min=-0.009201 max=0.009028 Jy/beam
! Clean residual mean=-0.000081 rms=0.002773 Jy/beam
! Combined flux in latest and established models = 0.284644 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 71 components and 0.284644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057584Jy  sigma=0.702361
! Fit after  self-cal, rms=0.057581Jy  sigma=0.702335
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057581Jy  sigma=0.702335
! Fit after  self-cal, rms=0.057527Jy  sigma=0.702180
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.77 mas, bmaj=50.76 mas, bpa=-12.47 degrees
! Estimated noise=5.85501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234435 Jy
! Component: 100  -  total flux cleaned = 0.000312959 Jy
! Component: 150  -  total flux cleaned = 0.000352109 Jy
! Component: 200  -  total flux cleaned = 0.000356052 Jy
! Total flux subtracted in 200 components = 0.000356052 Jy
! Clean residual min=-0.009179 max=0.008727 Jy/beam
! Clean residual mean=-0.000066 rms=0.002702 Jy/beam
! Combined flux in latest and established models = 0.285 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 72 components and 0.285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057472Jy  sigma=0.701595
! Fit after  self-cal, rms=0.057469Jy  sigma=0.701581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.62545e-05 Jy
! Component: 100  -  total flux cleaned = 5.24693e-05 Jy
! Component: 150  -  total flux cleaned = 5.43539e-05 Jy
! Component: 200  -  total flux cleaned = 8.49483e-05 Jy
! Total flux subtracted in 200 components = 8.49483e-05 Jy
! Clean residual min=-0.009192 max=0.008578 Jy/beam
! Clean residual mean=-0.000067 rms=0.002683 Jy/beam
! Combined flux in latest and established models = 0.285085 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 72 components and 0.285085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057432Jy  sigma=0.701206
! Fit after  self-cal, rms=0.057430Jy  sigma=0.701198
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057430Jy  sigma=0.701198
! Fit after  self-cal, rms=0.057381Jy  sigma=0.701090
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.37 mas, bmaj=50.03 mas, bpa=-4.059 degrees
! Estimated noise=8.16257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.38838e-05 Jy
! Component: 100  -  total flux cleaned = 5.31024e-05 Jy
! Component: 150  -  total flux cleaned = 5.32235e-05 Jy
! Component: 200  -  total flux cleaned = 5.35164e-05 Jy
! Total flux subtracted in 200 components = 5.35164e-05 Jy
! Clean residual min=-0.010326 max=0.009408 Jy/beam
! Clean residual mean=-0.000104 rms=0.004312 Jy/beam
! Combined flux in latest and established models = 0.285139 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 76 components and 0.285139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057372Jy  sigma=0.701086
! Fit after  self-cal, rms=0.057369Jy  sigma=0.701040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.00784e-05 Jy
! Component: 100  -  total flux cleaned = 7.8153e-05 Jy
! Component: 150  -  total flux cleaned = 7.74248e-05 Jy
! Component: 200  -  total flux cleaned = 7.70563e-05 Jy
! Total flux subtracted in 200 components = 7.70563e-05 Jy
! Clean residual min=-0.010311 max=0.009397 Jy/beam
! Clean residual mean=-0.000106 rms=0.004308 Jy/beam
! Combined flux in latest and established models = 0.285216 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 78 components and 0.285216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057367Jy  sigma=0.701098
! Fit after  self-cal, rms=0.057365Jy  sigma=0.701050
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.769 mas, bmaj=50.72 mas, bpa=-12.46 degrees
! Estimated noise=5.85484 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.769 x 50.72 at -12.46 degrees (North through East)
! Clean map  min=-0.0088095  max=0.26174 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.301 mas, bmaj=58.24 mas, bpa=-12.47 degrees
! Estimated noise=6.71639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194088 Jy
! Component: 100  -  total flux cleaned = 0.236709 Jy
! Component: 150  -  total flux cleaned = 0.253817 Jy
! Component: 200  -  total flux cleaned = 0.265222 Jy
! Total flux subtracted in 200 components = 0.265222 Jy
! Clean residual min=-0.010955 max=0.008663 Jy/beam
! Clean residual mean=0.000074 rms=0.003378 Jy/beam
! Combined flux in latest and established models = 0.265222 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.265222 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.769 mas, bmaj=50.72 mas, bpa=-12.46 degrees
! Estimated noise=5.85484 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111108 Jy
! Component: 100  -  total flux cleaned = 0.016573 Jy
! Component: 150  -  total flux cleaned = 0.0193465 Jy
! Component: 200  -  total flux cleaned = 0.0207889 Jy
! Total flux subtracted in 200 components = 0.0207889 Jy
! Clean residual min=-0.009252 max=0.008209 Jy/beam
! Clean residual mean=-0.000059 rms=0.002661 Jy/beam
! Combined flux in latest and established models = 0.286011 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.286011 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.37 mas, bmaj=50.03 mas, bpa=-4.059 degrees
! Estimated noise=8.16257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067678 Jy
! Component: 100  -  total flux cleaned = 0.00067632 Jy
! Component: 150  -  total flux cleaned = 0.000659659 Jy
! Component: 200  -  total flux cleaned = 0.000658385 Jy
! Total flux subtracted in 200 components = 0.000658385 Jy
! Clean residual min=-0.010275 max=0.009220 Jy/beam
! Clean residual mean=-0.000131 rms=0.004336 Jy/beam
! Combined flux in latest and established models = 0.28667 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.59711e-05 Jy
! Component: 100  -  total flux cleaned = -1.60431e-05 Jy
! Component: 150  -  total flux cleaned = -3.01185e-05 Jy
! Component: 200  -  total flux cleaned = -3.09504e-05 Jy
! Total flux subtracted in 200 components = -3.09504e-05 Jy
! Clean residual min=-0.010252 max=0.009209 Jy/beam
! Clean residual mean=-0.000130 rms=0.004319 Jy/beam
! Combined flux in latest and established models = 0.286639 Jy
! Adding 6 model components to the UV plane model.
! The established model now contains 36 components and 0.286639 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.769 mas, bmaj=50.72 mas, bpa=-12.46 degrees
! Estimated noise=5.85484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.31241e-05 Jy
! Component: 100  -  total flux cleaned = 7.56349e-05 Jy
! Component: 150  -  total flux cleaned = 9.88071e-05 Jy
! Component: 200  -  total flux cleaned = 9.91712e-05 Jy
! Total flux subtracted in 200 components = 9.91712e-05 Jy
! Clean residual min=-0.009125 max=0.008314 Jy/beam
! Clean residual mean=-0.000066 rms=0.002625 Jy/beam
! Combined flux in latest and established models = 0.286738 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.286738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057288Jy  sigma=0.700474
! Fit after  self-cal, rms=0.057280Jy  sigma=0.700445
wmodel J0526-4830_S_map.mod
! Writing 55 model components to file: J0526-4830_S_map.mod
wobs   J0526-4830_S_uvs.fits
! Writing UV FITS file: J0526-4830_S_uvs.fits
wwins  J0526-4830_S_map.win
! wwins: Wrote 1 windows to J0526-4830_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000826348 Jy
! Component: 100  -  total flux cleaned = 0.000202402 Jy
! Component: 150  -  total flux cleaned = 0.00121551 Jy
! Component: 200  -  total flux cleaned = 0.00193948 Jy
! Component: 250  -  total flux cleaned = 0.00229692 Jy
! Component: 300  -  total flux cleaned = 0.00268231 Jy
! Component: 350  -  total flux cleaned = 0.00328018 Jy
! Component: 400  -  total flux cleaned = 0.00344955 Jy
! Component: 450  -  total flux cleaned = 0.00383404 Jy
! Component: 500  -  total flux cleaned = 0.00415567 Jy
! Component: 550  -  total flux cleaned = 0.00457437 Jy
! Component: 600  -  total flux cleaned = 0.00478143 Jy
! Component: 650  -  total flux cleaned = 0.00483188 Jy
! Component: 700  -  total flux cleaned = 0.00477912 Jy
! Component: 750  -  total flux cleaned = 0.00472658 Jy
! Component: 800  -  total flux cleaned = 0.00456369 Jy
! Component: 850  -  total flux cleaned = 0.0043958 Jy
! Component: 900  -  total flux cleaned = 0.00433713 Jy
! Component: 950  -  total flux cleaned = 0.0042144 Jy
! Component: 1000  -  total flux cleaned = 0.00414849 Jy
! Component: 1050  -  total flux cleaned = 0.00428072 Jy
! Component: 1100  -  total flux cleaned = 0.00448936 Jy
! Component: 1150  -  total flux cleaned = 0.0046349 Jy
! Component: 1200  -  total flux cleaned = 0.00487065 Jy
! Component: 1250  -  total flux cleaned = 0.00503801 Jy
! Component: 1300  -  total flux cleaned = 0.00512702 Jy
! Component: 1350  -  total flux cleaned = 0.00522028 Jy
! Component: 1400  -  total flux cleaned = 0.0053192 Jy
! Component: 1450  -  total flux cleaned = 0.00542264 Jy
! Component: 1500  -  total flux cleaned = 0.00553351 Jy
! Component: 1550  -  total flux cleaned = 0.00565244 Jy
! Component: 1600  -  total flux cleaned = 0.00578081 Jy
! Component: 1650  -  total flux cleaned = 0.00578414 Jy
! Component: 1700  -  total flux cleaned = 0.005927 Jy
! Component: 1750  -  total flux cleaned = 0.00608074 Jy
! Component: 1800  -  total flux cleaned = 0.00607891 Jy
! Component: 1850  -  total flux cleaned = 0.00624288 Jy
! Component: 1900  -  total flux cleaned = 0.00642175 Jy
! Component: 1950  -  total flux cleaned = 0.00661195 Jy
! Component: 2000  -  total flux cleaned = 0.0068248 Jy
! Component: 2050  -  total flux cleaned = 0.00682042 Jy
! Component: 2100  -  total flux cleaned = 0.00706009 Jy
! Component: 2150  -  total flux cleaned = 0.00706772 Jy
! Component: 2200  -  total flux cleaned = 0.00734349 Jy
! Component: 2250  -  total flux cleaned = 0.0073478 Jy
! Component: 2300  -  total flux cleaned = 0.00766619 Jy
! Component: 2350  -  total flux cleaned = 0.00767001 Jy
! Component: 2400  -  total flux cleaned = 0.0080293 Jy
! Component: 2450  -  total flux cleaned = 0.00803864 Jy
! Component: 2500  -  total flux cleaned = 0.0084558 Jy
! Component: 2550  -  total flux cleaned = 0.00845149 Jy
! Component: 2600  -  total flux cleaned = 0.00892898 Jy
! Component: 2650  -  total flux cleaned = 0.00893204 Jy
! Component: 2700  -  total flux cleaned = 0.00947536 Jy
! Component: 2750  -  total flux cleaned = 0.00948275 Jy
! Component: 2800  -  total flux cleaned = 0.0101097 Jy
! Component: 2850  -  total flux cleaned = 0.0101161 Jy
! Component: 2900  -  total flux cleaned = 0.0101042 Jy
! Component: 2950  -  total flux cleaned = 0.0108499 Jy
! Component: 3000  -  total flux cleaned = 0.0108344 Jy
! Component: 3050  -  total flux cleaned = 0.0116789 Jy
! Component: 3100  -  total flux cleaned = 0.0126371 Jy
! Component: 3150  -  total flux cleaned = 0.0126399 Jy
! Component: 3200  -  total flux cleaned = 0.0137437 Jy
! Component: 3250  -  total flux cleaned = 0.0137472 Jy
! Component: 3300  -  total flux cleaned = 0.0149818 Jy
! Component: 3350  -  total flux cleaned = 0.015033 Jy
! Component: 3400  -  total flux cleaned = 0.0164513 Jy
! Component: 3450  -  total flux cleaned = 0.0164465 Jy
! Component: 3500  -  total flux cleaned = 0.0180929 Jy
! Component: 3550  -  total flux cleaned = 0.0181487 Jy
! Component: 3600  -  total flux cleaned = 0.0181259 Jy
! Component: 3650  -  total flux cleaned = 0.0201202 Jy
! Component: 3700  -  total flux cleaned = 0.0223525 Jy
! Component: 3750  -  total flux cleaned = 0.0224046 Jy
! Component: 3800  -  total flux cleaned = 0.0249309 Jy
! Component: 3850  -  total flux cleaned = 0.0250231 Jy
! Component: 3900  -  total flux cleaned = 0.0279661 Jy
! Component: 3950  -  total flux cleaned = 0.0280741 Jy
! Component: 4000  -  total flux cleaned = 0.0280364 Jy
! Component: 4050  -  total flux cleaned = 0.0315213 Jy
! Total flux subtracted in 4096 components = 0.0315131 Jy
! Clean residual min=-0.206974 max=0.202653 Jy/beam
! Clean residual mean=0.001865 rms=0.062814 Jy/beam
! Combined flux in latest and established models = 0.318251 Jy
keep
! Adding 104 model components to the UV plane model.
! The established model now contains 159 components and 0.318251 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv117_uvs/J0526-4830_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.769 x 50.72 at -12.46 degrees (North through East)
! Clean map  min=-0.31599  max=0.36789 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv117_uvs/J0526-4830_S_map.fits
wmodel /scr/pima/rv117_uvs/J0526-4830_S_map.mod
! Writing 159 model components to file: /scr/pima/rv117_uvs/J0526-4830_S_map.mod
wobs   /scr/pima/rv117_uvs/J0526-4830_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv117_uvs/J0526-4830_S_uvs.fits
wwins  /scr/pima/rv117_uvs/J0526-4830_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv117_uvs/J0526-4830_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.367888 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0743646 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -60.6418 60.6418
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.223 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.367 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4.947 
quit
! Quitting program
! Log file /scr/pima/rv117_uvs/J0526-4830_S_dfm.log closed on Sat Dec  9 23:42:19 2017