! Started logfile: /scr/pima/rv117_uvs/J0349+4609_X_dfm.log on Sat Dec 9 23:41:20 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J0349+4609_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J0349+4609_X_uva.fits ! AN table 1: 19 integrations on 6 of 6 possible baselines. ! AN table 2: 9 integrations on 36 of 36 possible baselines. ! AN table 3: 9 integrations on 45 of 45 possible baselines. ! AN table 4: 2 integrations on 45 of 45 possible baselines. ! AN table 5: 8 integrations on 36 of 36 possible baselines. ! AN table 6: 8 integrations on 21 of 21 possible baselines. ! AN table 7: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750531 visibilities/baseline/integration-bin. ! Found source: J0349+4609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 5656 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0349+4609_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.160800Jy sigma=19.096101 ! Fit after self-cal, rms=0.435070Jy sigma=6.964017 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.7494 mas, bmaj=0.9391 mas, bpa=-22.35 degrees ! Estimated noise=0.867522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442761 Jy ! Component: 100 - total flux cleaned = 0.540082 Jy ! Total flux subtracted in 100 components = 0.540082 Jy ! Clean residual min=-0.006789 max=0.030893 Jy/beam ! Clean residual mean=0.000064 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.540082 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.540082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093885Jy sigma=1.552263 ! Fit after self-cal, rms=0.093857Jy sigma=1.552143 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320331 Jy ! Component: 100 - total flux cleaned = 0.0481575 Jy ! Total flux subtracted in 100 components = 0.0481575 Jy ! Clean residual min=-0.005555 max=0.017106 Jy/beam ! Clean residual mean=0.000045 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.58824 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.58824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078720Jy sigma=1.256517 ! Fit after self-cal, rms=0.078454Jy sigma=1.254235 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Added new window around map position (2.4, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169384 Jy ! Component: 100 - total flux cleaned = 0.0277177 Jy ! Total flux subtracted in 100 components = 0.0277177 Jy ! Clean residual min=-0.004750 max=0.012927 Jy/beam ! Clean residual mean=0.000035 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.615957 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.615957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072897Jy sigma=1.139170 ! Fit after self-cal, rms=0.072537Jy sigma=1.134192 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Added new window around map position (1.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128531 Jy ! Component: 100 - total flux cleaned = 0.0205543 Jy ! Total flux subtracted in 100 components = 0.0205543 Jy ! Clean residual min=-0.004869 max=0.007837 Jy/beam ! Clean residual mean=0.000027 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.636512 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.636512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068811Jy sigma=1.058737 ! Fit after self-cal, rms=0.068493Jy sigma=1.054335 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Added new window around map position (0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807687 Jy ! Component: 100 - total flux cleaned = 0.0140724 Jy ! Total flux subtracted in 100 components = 0.0140724 Jy ! Clean residual min=-0.004817 max=0.004901 Jy/beam ! Clean residual mean=0.000021 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.650584 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.650584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066826Jy sigma=1.021061 ! Fit after self-cal, rms=0.066757Jy sigma=1.020107 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8084 mas, bmaj=1.132 mas, bpa=-20.95 degrees ! Estimated noise=0.665443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103051 Jy ! Component: 100 - total flux cleaned = 0.0172706 Jy ! Component: 150 - total flux cleaned = 0.0223693 Jy ! Component: 200 - total flux cleaned = 0.0261398 Jy ! Total flux subtracted in 200 components = 0.0261398 Jy ! Clean residual min=-0.003955 max=0.005537 Jy/beam ! Clean residual mean=0.000030 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.676724 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 68 components and 0.676724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065049Jy sigma=0.984152 ! Fit after self-cal, rms=0.064894Jy sigma=0.981262 ! Inverting map ! Your choice of large map pixels excluded 2.72% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8084 x 1.132 at -20.95 degrees (North through East) ! Clean map min=-0.0035864 max=0.56807 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.05 NY 0.93 ON 1.03 WZ 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 KP 0.99 LA 0.97 MK 1.00 ! NL 1.04 NY 1.00 ON 1.02 OV 1.01 ! PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 LA 0.97 MK 1.02 ! NL 1.01 NY 1.04 ON 1.01 OV 1.01 ! PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.98 HN 0.97 KP 0.99 ! LA 0.97 MK 1.00 NL 1.00 OV 1.00 ! PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.01 KP 1.01 LA 1.04 ! MK 1.02 NL 1.01 NY 1.03 OV 0.98 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 HN 0.97 LA 0.96 NL 1.06 ! NY 1.03 PT 1.02 WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.98 HN 0.98 KP 1.00 ! LA 0.97 NL 1.00 NY 0.97 OV 0.99 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.06 NY 1.02 ON 1.01 WZ 1.00 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 KP 0.99 LA 0.96 MK 1.03 ! NL 1.07 NY 0.99 ON 0.99 OV 0.99 ! PT 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 LA 0.97 MK 1.04 ! NL 1.01 NY 1.00 ON 1.01 OV 0.98 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.98 HN 1.00 KP 0.97 ! LA 0.96 MK 1.00 NL 0.98 OV 0.99 ! PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.01 KP 1.01 LA 1.04 ! MK 1.02 NL 1.03 NY 1.02 OV 0.99 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 HN 1.03 LA 0.95 NL 1.08 ! NY 1.01 PT 1.01 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 FD 0.97 HN 0.99 KP 1.00 ! LA 0.96 NL 1.00 NY 0.97 OV 0.98 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.13 NY 0.94 ON 1.03 WZ 1.01 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 KP 0.99 LA 0.96 MK 1.04 ! NL 1.05 NY 1.01 ON 1.00 OV 0.99 ! PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 LA 0.97 MK 1.04 ! NL 1.01 NY 1.02 ON 1.02 OV 0.98 ! PT 1.00 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.98 HN 1.00 KP 0.99 ! LA 0.98 MK 1.00 NL 1.00 OV 1.00 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 KP 1.04 LA 1.04 ! MK 1.03 NL 1.00 NY 1.03 OV 0.98 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 HN 1.02 LA 0.98 NL 1.07 ! NY 1.00 PT 1.03 WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.99 HN 1.00 KP 0.99 ! LA 0.97 NL 0.99 NY 1.00 OV 0.99 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.10 NY 1.00 ON 0.92 WZ 1.08 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 KP 0.98 LA 0.98 MK 1.03 ! NL 1.06 NY 1.04 ON 1.00 OV 1.00 ! PT 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 LA 0.98 MK 1.02 ! NL 1.01 NY 1.00 ON 1.01 OV 1.00 ! PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.96 HN 0.98 KP 1.01 ! LA 1.02 MK 1.03 NL 1.00 OV 1.02 ! PT 1.00 SC 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 1.01 KP 1.01 LA 1.04 ! MK 1.04 NL 1.02 NY 1.00 OV 1.01 ! PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.07 HN 1.01 LA 1.00 NL 1.07 ! NY 0.97 PT 1.02 WZ 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.00 HN 0.99 KP 1.01 ! LA 0.98 NL 1.00 NY 0.98 OV 1.01 ! PT 0.99 SC 0.93 ! ! ! Fit before self-cal, rms=0.064894Jy sigma=0.981262 ! Fit after self-cal, rms=0.061301Jy sigma=0.928756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8258 mas, bmaj=1.121 mas, bpa=-20.41 degrees ! Estimated noise=0.669638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504056 Jy ! Component: 100 - total flux cleaned = 0.00804236 Jy ! Component: 150 - total flux cleaned = 0.00991257 Jy ! Component: 200 - total flux cleaned = 0.010822 Jy ! Total flux subtracted in 200 components = 0.010822 Jy ! Clean residual min=-0.002893 max=0.003006 Jy/beam ! Clean residual mean=0.000008 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.687546 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.687546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060846Jy sigma=0.920405 ! Fit after self-cal, rms=0.060801Jy sigma=0.919450 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060801Jy sigma=0.919450 ! Fit after self-cal, rms=0.060445Jy sigma=0.912231 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8255 mas, bmaj=1.121 mas, bpa=-20.41 degrees ! Estimated noise=0.670068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258137 Jy ! Component: 100 - total flux cleaned = 0.00441462 Jy ! Component: 150 - total flux cleaned = 0.00527599 Jy ! Component: 200 - total flux cleaned = 0.00580496 Jy ! Total flux subtracted in 200 components = 0.00580496 Jy ! Clean residual min=-0.002741 max=0.002734 Jy/beam ! Clean residual mean=0.000009 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.693351 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 0.693351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060296Jy sigma=0.909568 ! Fit after self-cal, rms=0.060277Jy sigma=0.909260 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600135 Jy ! Component: 100 - total flux cleaned = 0.00106621 Jy ! Component: 150 - total flux cleaned = 0.00127079 Jy ! Component: 200 - total flux cleaned = 0.00138336 Jy ! Total flux subtracted in 200 components = 0.00138336 Jy ! Clean residual min=-0.002684 max=0.002671 Jy/beam ! Clean residual mean=0.000008 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.694734 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 0.694734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060216Jy sigma=0.908192 ! Fit after self-cal, rms=0.060207Jy sigma=0.908089 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060207Jy sigma=0.908089 ! Fit after self-cal, rms=0.059180Jy sigma=0.889592 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8254 mas, bmaj=1.12 mas, bpa=-20.39 degrees ! Estimated noise=0.670036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148835 Jy ! Component: 100 - total flux cleaned = 0.00211362 Jy ! Component: 150 - total flux cleaned = 0.00248759 Jy ! Component: 200 - total flux cleaned = 0.00268355 Jy ! Total flux subtracted in 200 components = 0.00268355 Jy ! Clean residual min=-0.002463 max=0.002322 Jy/beam ! Clean residual mean=0.000026 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.697418 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.697418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059119Jy sigma=0.888615 ! Fit after self-cal, rms=0.059114Jy sigma=0.888516 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172087 Jy ! Component: 100 - total flux cleaned = 0.00036632 Jy ! Component: 150 - total flux cleaned = 0.000454169 Jy ! Component: 200 - total flux cleaned = 0.00050882 Jy ! Total flux subtracted in 200 components = 0.00050882 Jy ! Clean residual min=-0.002432 max=0.002278 Jy/beam ! Clean residual mean=0.000026 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.697927 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 119 components and 0.697927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059083Jy sigma=0.888007 ! Fit after self-cal, rms=0.059079Jy sigma=0.887960 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059079Jy sigma=0.887960 ! Fit after self-cal, rms=0.059093Jy sigma=0.887822 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=2.393 mas, bmaj=2.938 mas, bpa=42.8 degrees ! Estimated noise=0.867345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168829 Jy ! Component: 100 - total flux cleaned = 0.00248708 Jy ! Component: 150 - total flux cleaned = 0.00264033 Jy ! Component: 200 - total flux cleaned = 0.00266008 Jy ! Total flux subtracted in 200 components = 0.00266008 Jy ! Clean residual min=-0.002401 max=0.002780 Jy/beam ! Clean residual mean=0.000061 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.700587 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.700587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059092Jy sigma=0.887657 ! Fit after self-cal, rms=0.059088Jy sigma=0.887581 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328341 Jy ! Component: 100 - total flux cleaned = 0.000488624 Jy ! Component: 150 - total flux cleaned = 0.000506188 Jy ! Component: 200 - total flux cleaned = 0.000522433 Jy ! Total flux subtracted in 200 components = 0.000522433 Jy ! Clean residual min=-0.002401 max=0.002804 Jy/beam ! Clean residual mean=0.000060 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.701109 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 0.701109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059089Jy sigma=0.887528 ! Fit after self-cal, rms=0.059087Jy sigma=0.887511 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8256 mas, bmaj=1.12 mas, bpa=-20.34 degrees ! Estimated noise=0.670169 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8256 x 1.12 at -20.34 degrees (North through East) ! Clean map min=-0.0020741 max=0.56687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059087Jy sigma=0.887511 ! Fit after self-cal, rms=0.054425Jy sigma=0.795662 ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8255 mas, bmaj=1.12 mas, bpa=-20.36 degrees ! Estimated noise=0.670218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36537e-05 Jy ! Component: 100 - total flux cleaned = -9.12838e-06 Jy ! Component: 150 - total flux cleaned = -0.000121608 Jy ! Component: 200 - total flux cleaned = -0.000171839 Jy ! Total flux subtracted in 200 components = -0.000171839 Jy ! Clean residual min=-0.002351 max=0.002285 Jy/beam ! Clean residual mean=0.000011 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.700937 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 141 components and 0.700937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054385Jy sigma=0.795124 ! Fit after self-cal, rms=0.054381Jy sigma=0.795089 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93911e-05 Jy ! Component: 100 - total flux cleaned = -5.24805e-05 Jy ! Component: 150 - total flux cleaned = -7.51861e-05 Jy ! Component: 200 - total flux cleaned = -9.64783e-05 Jy ! Total flux subtracted in 200 components = -9.64783e-05 Jy ! Clean residual min=-0.002337 max=0.002275 Jy/beam ! Clean residual mean=0.000011 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.700841 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.700841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054359Jy sigma=0.794776 ! Fit after self-cal, rms=0.054357Jy sigma=0.794759 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054357Jy sigma=0.794759 ! Fit after self-cal, rms=0.054369Jy sigma=0.794666 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.7583 mas, bmaj=0.9318 mas, bpa=-20.77 degrees ! Estimated noise=0.875035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442292 Jy ! Component: 100 - total flux cleaned = 0.539764 Jy ! Component: 150 - total flux cleaned = 0.575229 Jy ! Component: 200 - total flux cleaned = 0.598012 Jy ! Total flux subtracted in 200 components = 0.598012 Jy ! Clean residual min=-0.004429 max=0.012778 Jy/beam ! Clean residual mean=0.000043 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.598012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.598012 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8257 mas, bmaj=1.119 mas, bpa=-20.31 degrees ! Estimated noise=0.670397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272416 Jy ! Component: 100 - total flux cleaned = 0.0450389 Jy ! Component: 150 - total flux cleaned = 0.0576802 Jy ! Component: 200 - total flux cleaned = 0.0671172 Jy ! Total flux subtracted in 200 components = 0.0671172 Jy ! Clean residual min=-0.003299 max=0.006039 Jy/beam ! Clean residual mean=0.000054 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.665129 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 75 components and 0.665129 Jy ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Added new window around map position (2.2, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738942 Jy ! Component: 100 - total flux cleaned = 0.0131358 Jy ! Component: 150 - total flux cleaned = 0.0177002 Jy ! Component: 200 - total flux cleaned = 0.0213887 Jy ! Total flux subtracted in 200 components = 0.0213887 Jy ! Clean residual min=-0.002704 max=0.002993 Jy/beam ! Clean residual mean=0.000028 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.686518 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 112 components and 0.686518 Jy ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Added new window around map position (3.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032891 Jy ! Component: 100 - total flux cleaned = 0.00583976 Jy ! Component: 150 - total flux cleaned = 0.00792521 Jy ! Component: 200 - total flux cleaned = 0.00964152 Jy ! Total flux subtracted in 200 components = 0.00964152 Jy ! Clean residual min=-0.002428 max=0.002232 Jy/beam ! Clean residual mean=0.000016 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.696159 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 135 components and 0.696159 Jy ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=2.392 mas, bmaj=2.938 mas, bpa=42.77 degrees ! Estimated noise=0.868088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258756 Jy ! Component: 100 - total flux cleaned = 0.0042288 Jy ! Component: 150 - total flux cleaned = 0.00532613 Jy ! Component: 200 - total flux cleaned = 0.0060736 Jy ! Total flux subtracted in 200 components = 0.0060736 Jy ! Clean residual min=-0.002536 max=0.002778 Jy/beam ! Clean residual mean=0.000022 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.702233 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480498 Jy ! Component: 100 - total flux cleaned = 0.000668348 Jy ! Component: 150 - total flux cleaned = 0.000819183 Jy ! Component: 200 - total flux cleaned = 0.00089376 Jy ! Total flux subtracted in 200 components = 0.00089376 Jy ! Clean residual min=-0.002513 max=0.002786 Jy/beam ! Clean residual mean=0.000020 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.703127 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 165 components and 0.703127 Jy ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! Estimated beam: bmin=0.8257 mas, bmaj=1.119 mas, bpa=-20.31 degrees ! Estimated noise=0.670397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320341 Jy ! Component: 100 - total flux cleaned = -0.000218194 Jy ! Component: 150 - total flux cleaned = -0.000172246 Jy ! Component: 200 - total flux cleaned = -0.00015098 Jy ! Total flux subtracted in 200 components = -0.00015098 Jy ! Clean residual min=-0.002277 max=0.002330 Jy/beam ! Clean residual mean=0.000008 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.702976 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 179 components and 0.702976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054375Jy sigma=0.794379 ! Fit after self-cal, rms=0.054324Jy sigma=0.793709 wmodel J0349+4609_X_map.mod ! Writing 179 model components to file: J0349+4609_X_map.mod wobs J0349+4609_X_uvs.fits ! Writing UV FITS file: J0349+4609_X_uvs.fits wwins J0349+4609_X_map.win ! wwins: Wrote 7 windows to J0349+4609_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.65692e-05 Jy ! Component: 100 - total flux cleaned = 0.000130047 Jy ! Component: 150 - total flux cleaned = 0.000290963 Jy ! Component: 200 - total flux cleaned = 0.000447487 Jy ! Component: 250 - total flux cleaned = 0.000486435 Jy ! Component: 300 - total flux cleaned = 0.000487013 Jy ! Component: 350 - total flux cleaned = 0.000339689 Jy ! Component: 400 - total flux cleaned = 0.000194524 Jy ! Component: 450 - total flux cleaned = -5.56423e-05 Jy ! Component: 500 - total flux cleaned = -0.000161257 Jy ! Component: 550 - total flux cleaned = -0.000335726 Jy ! Component: 600 - total flux cleaned = -0.000473409 Jy ! Component: 650 - total flux cleaned = -0.000678045 Jy ! Component: 700 - total flux cleaned = -0.000846678 Jy ! Component: 750 - total flux cleaned = -0.00108079 Jy ! Component: 800 - total flux cleaned = -0.0013121 Jy ! Component: 850 - total flux cleaned = -0.00141035 Jy ! Component: 900 - total flux cleaned = -0.00154094 Jy ! Component: 950 - total flux cleaned = -0.00167025 Jy ! Component: 1000 - total flux cleaned = -0.0019272 Jy ! Component: 1050 - total flux cleaned = -0.0020227 Jy ! Component: 1100 - total flux cleaned = -0.00205452 Jy ! Component: 1150 - total flux cleaned = -0.0022748 Jy ! Component: 1200 - total flux cleaned = -0.00230633 Jy ! Component: 1250 - total flux cleaned = -0.0025237 Jy ! Component: 1300 - total flux cleaned = -0.00261616 Jy ! Component: 1350 - total flux cleaned = -0.00267724 Jy ! Component: 1400 - total flux cleaned = -0.00276854 Jy ! Component: 1450 - total flux cleaned = -0.00282887 Jy ! Component: 1500 - total flux cleaned = -0.00285893 Jy ! Component: 1550 - total flux cleaned = -0.00303858 Jy ! Component: 1600 - total flux cleaned = -0.00306832 Jy ! Component: 1650 - total flux cleaned = -0.00315741 Jy ! Component: 1700 - total flux cleaned = -0.00303963 Jy ! Component: 1750 - total flux cleaned = -0.00324477 Jy ! Component: 1800 - total flux cleaned = -0.00327371 Jy ! Component: 1850 - total flux cleaned = -0.00336068 Jy ! Component: 1900 - total flux cleaned = -0.00336077 Jy ! Component: 1950 - total flux cleaned = -0.00338925 Jy ! Component: 2000 - total flux cleaned = -0.00344661 Jy ! Component: 2050 - total flux cleaned = -0.00358886 Jy ! Component: 2100 - total flux cleaned = -0.00350392 Jy ! Component: 2150 - total flux cleaned = -0.00358864 Jy ! Component: 2200 - total flux cleaned = -0.00364478 Jy ! Component: 2250 - total flux cleaned = -0.00372859 Jy ! Component: 2300 - total flux cleaned = -0.0037564 Jy ! Component: 2350 - total flux cleaned = -0.00372859 Jy ! Component: 2400 - total flux cleaned = -0.00370118 Jy ! Component: 2450 - total flux cleaned = -0.00378365 Jy ! Component: 2500 - total flux cleaned = -0.00370185 Jy ! Component: 2550 - total flux cleaned = -0.00381074 Jy ! Component: 2600 - total flux cleaned = -0.00381074 Jy ! Component: 2650 - total flux cleaned = -0.00383757 Jy ! Component: 2700 - total flux cleaned = -0.00386443 Jy ! Component: 2750 - total flux cleaned = -0.00370341 Jy ! Component: 2800 - total flux cleaned = -0.00381036 Jy ! Component: 2850 - total flux cleaned = -0.00381056 Jy ! Component: 2900 - total flux cleaned = -0.00381048 Jy ! Component: 2950 - total flux cleaned = -0.00378406 Jy ! Component: 3000 - total flux cleaned = -0.00383668 Jy ! Component: 3050 - total flux cleaned = -0.00388901 Jy ! Component: 3100 - total flux cleaned = -0.00378464 Jy ! Component: 3150 - total flux cleaned = -0.0038366 Jy ! Component: 3200 - total flux cleaned = -0.0038107 Jy ! Component: 3250 - total flux cleaned = -0.00370735 Jy ! Component: 3300 - total flux cleaned = -0.00378445 Jy ! Component: 3350 - total flux cleaned = -0.00368169 Jy ! Component: 3400 - total flux cleaned = -0.00373287 Jy ! Component: 3450 - total flux cleaned = -0.00360563 Jy ! Component: 3500 - total flux cleaned = -0.00375789 Jy ! Component: 3550 - total flux cleaned = -0.00350516 Jy ! Component: 3600 - total flux cleaned = -0.00342964 Jy ! Component: 3650 - total flux cleaned = -0.0035553 Jy ! Component: 3700 - total flux cleaned = -0.00358023 Jy ! Component: 3750 - total flux cleaned = -0.00363019 Jy ! Component: 3800 - total flux cleaned = -0.0036303 Jy ! Component: 3850 - total flux cleaned = -0.00348172 Jy ! Component: 3900 - total flux cleaned = -0.00340763 Jy ! Component: 3950 - total flux cleaned = -0.00348148 Jy ! Component: 4000 - total flux cleaned = -0.00348156 Jy ! Component: 4050 - total flux cleaned = -0.00335925 Jy ! Total flux subtracted in 4096 components = -0.0034567 Jy ! Clean residual min=-0.001413 max=0.001244 Jy/beam ! Clean residual mean=0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.699519 Jy keep ! Adding 383 model components to the UV plane model. ! The established model now contains 562 components and 0.699519 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J0349+4609_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8257 x 1.119 at -20.31 degrees (North through East) ! Clean map min=-0.001897 max=0.56863 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J0349+4609_X_map.fits wmodel /scr/pima/rv117_uvs/J0349+4609_X_map.mod ! Writing 562 model components to file: /scr/pima/rv117_uvs/J0349+4609_X_map.mod wobs /scr/pima/rv117_uvs/J0349+4609_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J0349+4609_X_uvs.fits wwins /scr/pima/rv117_uvs/J0349+4609_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv117_uvs/J0349+4609_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.568631 invert ! Inverting map ! Your choice of large map pixels excluded 1.83% of the data. ! The x-axis pixel size should ideally be below 0.1716 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000411179 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.216931 0.216931 0.433862 0.867724 1.73545 3.4709 6.94179 13.8836 27.7672 55.5344 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.568 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1382.93 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J0349+4609_X_dfm.log closed on Sat Dec 9 23:41:25 2017