! Started logfile: /scr/pima/rv117_uvs/J0349+4609_S_dfm.log on Sat Dec 9 23:41:43 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J0349+4609_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J0349+4609_S_uva.fits ! AN table 1: 19 integrations on 6 of 6 possible baselines. ! AN table 2: 9 integrations on 36 of 36 possible baselines. ! AN table 3: 9 integrations on 45 of 45 possible baselines. ! AN table 4: 2 integrations on 45 of 45 possible baselines. ! AN table 5: 8 integrations on 36 of 36 possible baselines. ! AN table 6: 8 integrations on 21 of 21 possible baselines. ! AN table 7: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750531 visibilities/baseline/integration-bin. ! Found source: J0349+4609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 5656 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0349+4609_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 36 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.065341Jy sigma=17.368574 ! Fit after self-cal, rms=0.623401Jy sigma=9.886060 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=3.528 mas, bpa=-15.76 degrees ! Estimated noise=0.892146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284432 Jy ! Component: 100 - total flux cleaned = 0.365668 Jy ! Total flux subtracted in 100 components = 0.365668 Jy ! Clean residual min=-0.007788 max=0.035601 Jy/beam ! Clean residual mean=0.000066 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.365668 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.365668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123874Jy sigma=1.823505 ! Fit after self-cal, rms=0.123154Jy sigma=1.817286 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423461 Jy ! Component: 100 - total flux cleaned = 0.0674565 Jy ! Total flux subtracted in 100 components = 0.0674565 Jy ! Clean residual min=-0.005597 max=0.018807 Jy/beam ! Clean residual mean=0.000047 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.433125 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.433125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098127Jy sigma=1.335477 ! Fit after self-cal, rms=0.097515Jy sigma=1.328017 ! Inverting map ! Added new window around map position (4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198523 Jy ! Component: 100 - total flux cleaned = 0.031866 Jy ! Total flux subtracted in 100 components = 0.031866 Jy ! Clean residual min=-0.004529 max=0.009858 Jy/beam ! Clean residual mean=0.000038 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.464991 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.464991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089870Jy sigma=1.179911 ! Fit after self-cal, rms=0.089554Jy sigma=1.174406 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095346 Jy ! Component: 100 - total flux cleaned = 0.0158438 Jy ! Total flux subtracted in 100 components = 0.0158438 Jy ! Clean residual min=-0.004274 max=0.007108 Jy/beam ! Clean residual mean=0.000033 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.480835 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.480835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087039Jy sigma=1.126517 ! Fit after self-cal, rms=0.086963Jy sigma=1.125008 ! Inverting map ! Added new window around map position (-0.5, 14.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695237 Jy ! Component: 100 - total flux cleaned = 0.0115913 Jy ! Total flux subtracted in 100 components = 0.0115913 Jy ! Clean residual min=-0.004122 max=0.006740 Jy/beam ! Clean residual mean=0.000031 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.492426 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.492426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085789Jy sigma=1.101340 ! Fit after self-cal, rms=0.085739Jy sigma=1.100403 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=4.201 mas, bpa=-17.76 degrees ! Estimated noise=0.682432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119058 Jy ! Component: 100 - total flux cleaned = 0.0201115 Jy ! Component: 150 - total flux cleaned = 0.0264047 Jy ! Component: 200 - total flux cleaned = 0.0313507 Jy ! Total flux subtracted in 200 components = 0.0313507 Jy ! Clean residual min=-0.005725 max=0.013845 Jy/beam ! Clean residual mean=0.000113 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.523777 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 96 components and 0.523777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083427Jy sigma=1.061155 ! Fit after self-cal, rms=0.083311Jy sigma=1.058573 ! Inverting map ! Added new window around map position (16.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150122 Jy ! Component: 100 - total flux cleaned = 0.0245845 Jy ! Component: 150 - total flux cleaned = 0.0314175 Jy ! Component: 200 - total flux cleaned = 0.0368464 Jy ! Total flux subtracted in 200 components = 0.0368464 Jy ! Clean residual min=-0.005793 max=0.008041 Jy/beam ! Clean residual mean=0.000082 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.560623 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 131 components and 0.560623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080037Jy sigma=0.995343 ! Fit after self-cal, rms=0.079685Jy sigma=0.989233 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 4.201 at -17.76 degrees (North through East) ! Clean map min=-0.005227 max=0.37347 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 0.87 NY 0.90 ON 0.79 WZ 1.20 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 1.02 LA 0.98 MK 0.97 ! NL 1.05 NY 1.11 ON 0.97 OV 1.00 ! PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 LA 0.97 MK 0.96 ! NL 1.00 NY 0.91 ON 0.95 OV 0.97 ! PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.94 HN 1.03 KP 1.01 ! LA 1.00 MK 1.02 NL 1.21 OV 0.97 ! PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.85 KP 1.03 LA 1.07 ! MK 0.96 NL 1.03 NY 0.97 OV 0.99 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 HN 1.03 LA 0.97 NL 1.01 ! NY 0.99 PT 0.99 WZ 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.98 HN 1.00 KP 1.03 ! LA 0.97 NL 0.99 NY 1.10 OV 1.00 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.36 NY 0.88 ON 0.95 WZ 0.96 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 KP 1.02 LA 0.95 MK 0.97 ! NL 1.06 NY 1.07 ON 1.04 OV 1.04 ! PT 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 LA 0.95 MK 1.00 ! NL 0.99 NY 0.90 ON 0.99 OV 1.03 ! PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.93 HN 1.04 KP 1.09 ! LA 0.95 MK 0.97 NL 1.12 OV 1.05 ! PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 0.86 KP 1.00 LA 1.02 ! MK 0.98 NL 1.04 NY 0.95 OV 1.04 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 HN 1.16 LA 0.91 NL 1.04 ! NY 0.93 PT 0.97 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 0.98 HN 1.03 KP 1.03 ! LA 0.95 NL 0.98 NY 1.01 OV 1.03 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 1.09 NY 0.87 ON 0.97 WZ 0.99 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 KP 0.99 LA 0.96 MK 0.99 ! NL 1.09 NY 1.04 ON 0.97 OV 1.03 ! PT 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 LA 0.98 MK 1.00 ! NL 1.00 NY 0.95 ON 1.01 OV 1.01 ! PT 1.00 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.94 HN 1.04 KP 1.03 ! LA 0.97 MK 0.98 NL 0.98 OV 1.06 ! PT 1.01 SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 0.86 KP 1.00 LA 1.04 ! MK 1.01 NL 1.02 NY 1.05 OV 1.04 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 HN 1.08 LA 0.97 NL 1.02 ! NY 0.96 PT 1.01 WZ 1.06 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.99 HN 1.02 KP 1.01 ! LA 0.98 NL 1.01 NY 1.04 OV 1.01 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MK 0.98 NY 0.96 ON 1.12 WZ 0.95 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 KP 1.02 LA 0.97 MK 1.01 ! NL 1.04 NY 1.06 ON 1.10 OV 0.99 ! PT 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 LA 1.02 MK 1.00 ! NL 1.01 NY 0.99 ON 1.00 OV 0.99 ! PT 0.99 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 HN 1.03 KP 1.05 ! LA 0.99 MK 0.98 NL 1.00 OV 1.01 ! PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 0.78 KP 1.00 LA 1.03 ! MK 1.01 NL 1.00 NY 1.00 OV 1.01 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 HN 1.09 LA 0.97 NL 1.07 ! NY 0.93 PT 0.92 WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.00 HN 1.02 KP 1.02 ! LA 0.98 NL 1.02 NY 1.04 OV 1.03 ! PT 0.98 SC 0.96 ! ! ! Fit before self-cal, rms=0.079685Jy sigma=0.989233 ! Fit after self-cal, rms=0.070111Jy sigma=0.909171 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=4.168 mas, bpa=-16.89 degrees ! Estimated noise=0.682179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728157 Jy ! Component: 100 - total flux cleaned = 0.0120948 Jy ! Component: 150 - total flux cleaned = 0.0144666 Jy ! Component: 200 - total flux cleaned = 0.0159315 Jy ! Total flux subtracted in 200 components = 0.0159315 Jy ! Clean residual min=-0.003655 max=0.005470 Jy/beam ! Clean residual mean=0.000024 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.576554 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 168 components and 0.576555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069148Jy sigma=0.889072 ! Fit after self-cal, rms=0.069090Jy sigma=0.887685 ! Inverting map ! Added new window around map position (22.5, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518675 Jy ! Component: 100 - total flux cleaned = 0.00716554 Jy ! Component: 150 - total flux cleaned = 0.00876193 Jy ! Component: 200 - total flux cleaned = 0.0101864 Jy ! Total flux subtracted in 200 components = 0.0101864 Jy ! Clean residual min=-0.003487 max=0.004464 Jy/beam ! Clean residual mean=0.000019 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.586741 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 200 components and 0.586741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068516Jy sigma=0.876479 ! Fit after self-cal, rms=0.068475Jy sigma=0.875845 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068475Jy sigma=0.875845 ! Fit after self-cal, rms=0.068044Jy sigma=0.869982 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=4.169 mas, bpa=-16.93 degrees ! Estimated noise=0.681428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295351 Jy ! Component: 100 - total flux cleaned = 0.00490211 Jy ! Component: 150 - total flux cleaned = 0.00615067 Jy ! Component: 200 - total flux cleaned = 0.00737445 Jy ! Total flux subtracted in 200 components = 0.00737445 Jy ! Clean residual min=-0.003378 max=0.004318 Jy/beam ! Clean residual mean=0.000023 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.594116 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 211 components and 0.594115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067755Jy sigma=0.864470 ! Fit after self-cal, rms=0.067735Jy sigma=0.864177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, -68). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438727 Jy ! Component: 100 - total flux cleaned = 0.00663081 Jy ! Component: 150 - total flux cleaned = 0.00783188 Jy ! Component: 200 - total flux cleaned = 0.0089115 Jy ! Total flux subtracted in 200 components = 0.0089115 Jy ! Clean residual min=-0.003088 max=0.003754 Jy/beam ! Clean residual mean=0.000019 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.603027 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 235 components and 0.603027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067403Jy sigma=0.856801 ! Fit after self-cal, rms=0.067364Jy sigma=0.856329 ! Inverting map ! Added new window around map position (39.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378996 Jy ! Component: 100 - total flux cleaned = 0.00599225 Jy ! Component: 150 - total flux cleaned = 0.00737695 Jy ! Component: 200 - total flux cleaned = 0.0086406 Jy ! Total flux subtracted in 200 components = 0.0086406 Jy ! Clean residual min=-0.003193 max=0.003637 Jy/beam ! Clean residual mean=0.000007 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.611667 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 257 components and 0.611667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067075Jy sigma=0.851238 ! Fit after self-cal, rms=0.067067Jy sigma=0.850993 ! Inverting map ! Added new window around map position (-9, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365313 Jy ! Component: 100 - total flux cleaned = 0.00556012 Jy ! Component: 150 - total flux cleaned = 0.00685726 Jy ! Component: 200 - total flux cleaned = 0.00797701 Jy ! Total flux subtracted in 200 components = 0.00797701 Jy ! Clean residual min=-0.003060 max=0.003033 Jy/beam ! Clean residual mean=-0.000000 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.619644 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 277 components and 0.619644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066818Jy sigma=0.846029 ! Fit after self-cal, rms=0.066803Jy sigma=0.845806 ! Inverting map ! Added new window around map position (2.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322169 Jy ! Component: 100 - total flux cleaned = 0.00445492 Jy ! Component: 150 - total flux cleaned = 0.0050824 Jy ! Component: 200 - total flux cleaned = 0.00554172 Jy ! Total flux subtracted in 200 components = 0.00554172 Jy ! Clean residual min=-0.003090 max=0.002928 Jy/beam ! Clean residual mean=-0.000006 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.625186 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 301 components and 0.625186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066609Jy sigma=0.841824 ! Fit after self-cal, rms=0.066594Jy sigma=0.841552 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066594Jy sigma=0.841552 ! Fit after self-cal, rms=0.065420Jy sigma=0.823182 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=4.169 mas, bpa=-16.93 degrees ! Estimated noise=0.680907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211087 Jy ! Component: 100 - total flux cleaned = 0.00358992 Jy ! Component: 150 - total flux cleaned = 0.00454946 Jy ! Component: 200 - total flux cleaned = 0.0053828 Jy ! Total flux subtracted in 200 components = 0.0053828 Jy ! Clean residual min=-0.002835 max=0.002738 Jy/beam ! Clean residual mean=0.000014 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.630569 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 325 components and 0.630569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065288Jy sigma=0.820910 ! Fit after self-cal, rms=0.065282Jy sigma=0.820798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678613 Jy ! Component: 100 - total flux cleaned = 0.00140402 Jy ! Component: 150 - total flux cleaned = 0.002037 Jy ! Component: 200 - total flux cleaned = 0.00258941 Jy ! Total flux subtracted in 200 components = 0.00258941 Jy ! Clean residual min=-0.002806 max=0.002697 Jy/beam ! Clean residual mean=0.000012 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.633158 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 335 components and 0.633158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065202Jy sigma=0.819553 ! Fit after self-cal, rms=0.065198Jy sigma=0.819505 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065198Jy sigma=0.819505 ! Fit after self-cal, rms=0.065206Jy sigma=0.819291 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.255 mas, bmaj=10.21 mas, bpa=40.28 degrees ! Estimated noise=0.878546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272741 Jy ! Component: 100 - total flux cleaned = 0.00392308 Jy ! Component: 150 - total flux cleaned = 0.00500168 Jy ! Component: 200 - total flux cleaned = 0.0057508 Jy ! Total flux subtracted in 200 components = 0.0057508 Jy ! Clean residual min=-0.003248 max=0.003693 Jy/beam ! Clean residual mean=0.000030 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.638909 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 354 components and 0.638909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065168Jy sigma=0.818431 ! Fit after self-cal, rms=0.065152Jy sigma=0.818234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000694525 Jy ! Component: 100 - total flux cleaned = 0.00131758 Jy ! Component: 150 - total flux cleaned = 0.00197712 Jy ! Component: 200 - total flux cleaned = 0.00252471 Jy ! Total flux subtracted in 200 components = 0.00252471 Jy ! Clean residual min=-0.003243 max=0.003598 Jy/beam ! Clean residual mean=0.000026 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.641434 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 364 components and 0.641434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065154Jy sigma=0.818129 ! Fit after self-cal, rms=0.065145Jy sigma=0.818047 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=4.168 mas, bpa=-16.92 degrees ! Estimated noise=0.680845 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 4.168 at -16.92 degrees (North through East) ! Clean map min=-0.002657 max=0.37329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=3.504 mas, bpa=-14.05 degrees ! Estimated noise=0.903391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284264 Jy ! Component: 100 - total flux cleaned = 0.370938 Jy ! Component: 150 - total flux cleaned = 0.415583 Jy ! Component: 200 - total flux cleaned = 0.442783 Jy ! Total flux subtracted in 200 components = 0.442783 Jy ! Clean residual min=-0.005049 max=0.014213 Jy/beam ! Clean residual mean=0.000044 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.442783 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.442783 Jy ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=4.168 mas, bpa=-16.92 degrees ! Estimated noise=0.680845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282985 Jy ! Component: 100 - total flux cleaned = 0.0476062 Jy ! Component: 150 - total flux cleaned = 0.0629625 Jy ! Component: 200 - total flux cleaned = 0.0756718 Jy ! Total flux subtracted in 200 components = 0.0756718 Jy ! Clean residual min=-0.004442 max=0.008670 Jy/beam ! Clean residual mean=0.000105 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.518455 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 112 components and 0.518455 Jy ! Inverting map ! Added new window around map position (9, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110647 Jy ! Component: 100 - total flux cleaned = 0.0204735 Jy ! Component: 150 - total flux cleaned = 0.0287325 Jy ! Component: 200 - total flux cleaned = 0.0361052 Jy ! Total flux subtracted in 200 components = 0.0361052 Jy ! Clean residual min=-0.003612 max=0.005579 Jy/beam ! Clean residual mean=0.000077 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.55456 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 187 components and 0.55456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.255 mas, bmaj=10.21 mas, bpa=40.28 degrees ! Estimated noise=0.878546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013729 Jy ! Component: 100 - total flux cleaned = 0.0245859 Jy ! Component: 150 - total flux cleaned = 0.0334438 Jy ! Component: 200 - total flux cleaned = 0.0407951 Jy ! Total flux subtracted in 200 components = 0.0407951 Jy ! Clean residual min=-0.004049 max=0.005926 Jy/beam ! Clean residual mean=0.000118 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.595355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00625836 Jy ! Component: 100 - total flux cleaned = 0.0116038 Jy ! Component: 150 - total flux cleaned = 0.0161845 Jy ! Component: 200 - total flux cleaned = 0.0201324 Jy ! Total flux subtracted in 200 components = 0.0201324 Jy ! Clean residual min=-0.003094 max=0.004311 Jy/beam ! Clean residual mean=0.000081 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.615487 Jy ! Adding 188 model components to the UV plane model. ! The established model now contains 348 components and 0.615487 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=4.168 mas, bpa=-16.92 degrees ! Estimated noise=0.680845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331333 Jy ! Component: 100 - total flux cleaned = 0.00598441 Jy ! Component: 150 - total flux cleaned = 0.0083132 Jy ! Component: 200 - total flux cleaned = 0.0103909 Jy ! Total flux subtracted in 200 components = 0.0103909 Jy ! Clean residual min=-0.002791 max=0.002849 Jy/beam ! Clean residual mean=0.000024 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.625878 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 371 components and 0.625878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065455Jy sigma=0.824597 ! Fit after self-cal, rms=0.065383Jy sigma=0.823207 wmodel J0349+4609_S_map.mod ! Writing 371 model components to file: J0349+4609_S_map.mod wobs J0349+4609_S_uvs.fits ! Writing UV FITS file: J0349+4609_S_uvs.fits wwins J0349+4609_S_map.win ! wwins: Wrote 11 windows to J0349+4609_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461363 Jy ! Component: 100 - total flux cleaned = 0.000795488 Jy ! Component: 150 - total flux cleaned = 0.000885727 Jy ! Component: 200 - total flux cleaned = 0.000971598 Jy ! Component: 250 - total flux cleaned = 0.0011375 Jy ! Component: 300 - total flux cleaned = 0.00121773 Jy ! Component: 350 - total flux cleaned = 0.00105927 Jy ! Component: 400 - total flux cleaned = 0.000942852 Jy ! Component: 450 - total flux cleaned = 0.00086662 Jy ! Component: 500 - total flux cleaned = 0.000642726 Jy ! Component: 550 - total flux cleaned = 0.000643707 Jy ! Component: 600 - total flux cleaned = 0.000498842 Jy ! Component: 650 - total flux cleaned = 0.000391422 Jy ! Component: 700 - total flux cleaned = 0.000249534 Jy ! Component: 750 - total flux cleaned = 0.000179809 Jy ! Component: 800 - total flux cleaned = 0.000110327 Jy ! Component: 850 - total flux cleaned = 4.17241e-05 Jy ! Component: 900 - total flux cleaned = -2.64063e-05 Jy ! Component: 950 - total flux cleaned = -9.37559e-05 Jy ! Component: 1000 - total flux cleaned = -2.70941e-05 Jy ! Component: 1050 - total flux cleaned = -2.78457e-05 Jy ! Component: 1100 - total flux cleaned = -0.00012622 Jy ! Component: 1150 - total flux cleaned = -0.000223325 Jy ! Component: 1200 - total flux cleaned = -0.000254691 Jy ! Component: 1250 - total flux cleaned = -0.000222803 Jy ! Component: 1300 - total flux cleaned = -0.000191074 Jy ! Component: 1350 - total flux cleaned = -6.58784e-05 Jy ! Component: 1400 - total flux cleaned = -3.49851e-05 Jy ! Component: 1450 - total flux cleaned = -4.38186e-06 Jy ! Component: 1500 - total flux cleaned = 2.63012e-05 Jy ! Component: 1550 - total flux cleaned = 8.68402e-05 Jy ! Component: 1600 - total flux cleaned = 0.000116569 Jy ! Component: 1650 - total flux cleaned = 0.000116554 Jy ! Component: 1700 - total flux cleaned = 0.000235559 Jy ! Component: 1750 - total flux cleaned = 0.000265104 Jy ! Component: 1800 - total flux cleaned = 0.000323755 Jy ! Component: 1850 - total flux cleaned = 0.0002948 Jy ! Component: 1900 - total flux cleaned = 0.000381643 Jy ! Component: 1950 - total flux cleaned = 0.00032427 Jy ! Component: 2000 - total flux cleaned = 0.000438584 Jy ! Component: 2050 - total flux cleaned = 0.00046724 Jy ! Component: 2100 - total flux cleaned = 0.000438986 Jy ! Component: 2150 - total flux cleaned = 0.000579329 Jy ! Component: 2200 - total flux cleaned = 0.000495717 Jy ! Component: 2250 - total flux cleaned = 0.000578861 Jy ! Component: 2300 - total flux cleaned = 0.000689115 Jy ! Component: 2350 - total flux cleaned = 0.000661732 Jy ! Component: 2400 - total flux cleaned = 0.000770646 Jy ! Component: 2450 - total flux cleaned = 0.000824604 Jy ! Component: 2500 - total flux cleaned = 0.00082447 Jy ! Component: 2550 - total flux cleaned = 0.000851021 Jy ! Component: 2600 - total flux cleaned = 0.00103797 Jy ! Component: 2650 - total flux cleaned = 0.00103807 Jy ! Component: 2700 - total flux cleaned = 0.00101141 Jy ! Component: 2750 - total flux cleaned = 0.00109038 Jy ! Component: 2800 - total flux cleaned = 0.00116893 Jy ! Component: 2850 - total flux cleaned = 0.00119491 Jy ! Component: 2900 - total flux cleaned = 0.00124671 Jy ! Component: 2950 - total flux cleaned = 0.00129814 Jy ! Component: 3000 - total flux cleaned = 0.00122102 Jy ! Component: 3050 - total flux cleaned = 0.00127217 Jy ! Component: 3100 - total flux cleaned = 0.00127212 Jy ! Component: 3150 - total flux cleaned = 0.00134811 Jy ! Component: 3200 - total flux cleaned = 0.00134828 Jy ! Component: 3250 - total flux cleaned = 0.00144844 Jy ! Component: 3300 - total flux cleaned = 0.00149831 Jy ! Component: 3350 - total flux cleaned = 0.00154805 Jy ! Component: 3400 - total flux cleaned = 0.00157278 Jy ! Component: 3450 - total flux cleaned = 0.00159737 Jy ! Component: 3500 - total flux cleaned = 0.00167079 Jy ! Component: 3550 - total flux cleaned = 0.00174412 Jy ! Component: 3600 - total flux cleaned = 0.001817 Jy ! Component: 3650 - total flux cleaned = 0.00196203 Jy ! Component: 3700 - total flux cleaned = 0.0018898 Jy ! Component: 3750 - total flux cleaned = 0.00196178 Jy ! Component: 3800 - total flux cleaned = 0.00203347 Jy ! Component: 3850 - total flux cleaned = 0.00210481 Jy ! Component: 3900 - total flux cleaned = 0.00208096 Jy ! Component: 3950 - total flux cleaned = 0.00224612 Jy ! Component: 4000 - total flux cleaned = 0.0023403 Jy ! Component: 4050 - total flux cleaned = 0.00248061 Jy ! Total flux subtracted in 4096 components = 0.00257378 Jy ! Clean residual min=-0.001207 max=0.001257 Jy/beam ! Clean residual mean=0.000042 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.628452 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 693 components and 0.628453 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J0349+4609_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 4.168 at -16.92 degrees (North through East) ! Clean map min=-0.0023437 max=0.37603 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J0349+4609_S_map.fits wmodel /scr/pima/rv117_uvs/J0349+4609_S_map.mod ! Writing 693 model components to file: /scr/pima/rv117_uvs/J0349+4609_S_map.mod wobs /scr/pima/rv117_uvs/J0349+4609_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J0349+4609_S_uvs.fits wwins /scr/pima/rv117_uvs/J0349+4609_S_map.win ! wwins: Wrote 12 windows to /scr/pima/rv117_uvs/J0349+4609_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.376033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00042349 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337862 0.337862 0.675724 1.35145 2.70289 5.40579 10.8116 21.6232 43.2463 86.4926 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.376 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 887.936 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J0349+4609_S_dfm.log closed on Sat Dec 9 23:41:48 2017