! Started logfile: /scr/pima/rv102_uvs/J2337-0230_S_dfm.log on Sat Nov  9 09:37:18 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rv102_uvs/J2337-0230_S_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J2337-0230_S_uva.fits
! AN table 1: 9 integrations on 1 of 1 possible baselines.
! AN table 2: 17 integrations on 21 of 21 possible baselines.
! AN table 3: 11 integrations on 10 of 10 possible baselines.
! AN table 4: 15 integrations on 3 of 3 possible baselines.
! Apparent sampling: 0.856046 visibilities/baseline/integration-bin.
! Found source: J2337-0230
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 1784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2337-0230_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.139029Jy  sigma=16.249176
! Fit after  self-cal, rms=0.501982Jy  sigma=7.113955
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.876 mas, bmaj=26.56 mas, bpa=-17.72 degrees
! Estimated noise=2.00222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.385786 Jy
! Component: 100  -  total flux cleaned = 0.472103 Jy
! Total flux subtracted in 100 components = 0.472103 Jy
! Clean residual min=-0.022256 max=0.033113 Jy/beam
! Clean residual mean=-0.000310 rms=0.007056 Jy/beam
! Combined flux in latest and established models = 0.472103 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.472103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103922Jy  sigma=1.451814
! Fit after  self-cal, rms=0.103836Jy  sigma=1.451297
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=25.41 mas, bpa=-18.34 degrees
! Estimated noise=1.26218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0455034 Jy
! Component: 100  -  total flux cleaned = 0.0682024 Jy
! Component: 150  -  total flux cleaned = 0.0814065 Jy
! Component: 200  -  total flux cleaned = 0.0900489 Jy
! Total flux subtracted in 200 components = 0.0900489 Jy
! Clean residual min=-0.012224 max=0.013132 Jy/beam
! Clean residual mean=0.000003 rms=0.003320 Jy/beam
! Combined flux in latest and established models = 0.562152 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 63 components and 0.562152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084972Jy  sigma=1.105476
! Fit after  self-cal, rms=0.084448Jy  sigma=1.098565
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 25.41 at -18.34 degrees (North through East)
! Clean map  min=-0.011675  max=0.4904 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        1.03     KP        0.93     LA        0.99     
!   MK        1.27     NL        1.01     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.96     KP        0.95     LA        0.99     MK        1.27     
!   PT        0.99     
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    KP        0.00*    LA        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        1.02     KP        0.95     LA        0.96     
!   MK        1.03     NL        1.04     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.98     KP        0.97     LA        1.01     MK        0.96     
!   PT        0.99     
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    KP        0.00*    LA        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.03     KP        0.98     LA        1.01     
!   MK        1.03     NL        1.01     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.02     KP        1.01     LA        1.01     MK        1.00     
!   PT        1.00     
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    KP        0.00*    LA        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.13     KP        0.96     LA        1.00     
!   MK        0.84     NL        0.97     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.03     KP        0.99     LA        1.00     MK        0.82     
!   PT        1.02     
! 
!  A total of 42 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    KP        0.00*    LA        0.00*    
! 
! 
! Fit before self-cal, rms=0.084448Jy  sigma=1.098565
! Fit after  self-cal, rms=0.072611Jy  sigma=0.977578
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.752 mas, bmaj=25.54 mas, bpa=-18.22 degrees
! Estimated noise=1.30019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000649285 Jy
! Component: 100  -  total flux cleaned = -0.000991355 Jy
! Component: 150  -  total flux cleaned = -0.000979562 Jy
! Component: 200  -  total flux cleaned = -0.000620306 Jy
! Total flux subtracted in 200 components = -0.000620306 Jy
! Clean residual min=-0.005345 max=0.007034 Jy/beam
! Clean residual mean=-0.000042 rms=0.001909 Jy/beam
! Combined flux in latest and established models = 0.561532 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.561532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071807Jy  sigma=0.965545
! Fit after  self-cal, rms=0.071762Jy  sigma=0.964004
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071762Jy  sigma=0.964004
! Fit after  self-cal, rms=0.071895Jy  sigma=0.963741
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.754 mas, bmaj=25.54 mas, bpa=-18.22 degrees
! Estimated noise=1.30143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937097 Jy
! Component: 100  -  total flux cleaned = 0.000718895 Jy
! Component: 150  -  total flux cleaned = 0.000984959 Jy
! Component: 200  -  total flux cleaned = 0.00106453 Jy
! Total flux subtracted in 200 components = 0.00106453 Jy
! Clean residual min=-0.004991 max=0.006232 Jy/beam
! Clean residual mean=-0.000037 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.562596 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.562596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071591Jy  sigma=0.959277
! Fit after  self-cal, rms=0.071548Jy  sigma=0.958758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130761 Jy
! Component: 100  -  total flux cleaned = 0.000129193 Jy
! Component: 150  -  total flux cleaned = 3.34035e-06 Jy
! Component: 200  -  total flux cleaned = 6.06759e-05 Jy
! Total flux subtracted in 200 components = 6.06759e-05 Jy
! Clean residual min=-0.004681 max=0.005859 Jy/beam
! Clean residual mean=-0.000039 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 0.562657 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.562657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071408Jy  sigma=0.956824
! Fit after  self-cal, rms=0.071385Jy  sigma=0.956570
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071385Jy  sigma=0.956570
! Fit after  self-cal, rms=0.071544Jy  sigma=0.956074
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.758 mas, bmaj=25.55 mas, bpa=-18.22 degrees
! Estimated noise=1.30272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077584 Jy
! Component: 100  -  total flux cleaned = 0.000587092 Jy
! Component: 150  -  total flux cleaned = 0.000585719 Jy
! Component: 200  -  total flux cleaned = 0.000586811 Jy
! Total flux subtracted in 200 components = 0.000586811 Jy
! Clean residual min=-0.004595 max=0.005488 Jy/beam
! Clean residual mean=-0.000029 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.563244 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 123 components and 0.563244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071429Jy  sigma=0.954421
! Fit after  self-cal, rms=0.071418Jy  sigma=0.954278
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.94547e-05 Jy
! Component: 100  -  total flux cleaned = -5.90987e-05 Jy
! Component: 150  -  total flux cleaned = -0.000183696 Jy
! Component: 200  -  total flux cleaned = -0.00018239 Jy
! Total flux subtracted in 200 components = -0.00018239 Jy
! Clean residual min=-0.004416 max=0.005333 Jy/beam
! Clean residual mean=-0.000031 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.563061 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 0.563061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071361Jy  sigma=0.953534
! Fit after  self-cal, rms=0.071352Jy  sigma=0.953450
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071352Jy  sigma=0.953450
! Fit after  self-cal, rms=0.071499Jy  sigma=0.953119
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=24.91 mas, bpa=-27.28 degrees
! Estimated noise=1.47514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000603575 Jy
! Component: 100  -  total flux cleaned = 0.000274248 Jy
! Component: 150  -  total flux cleaned = 0.000111866 Jy
! Component: 200  -  total flux cleaned = 7.54833e-05 Jy
! Total flux subtracted in 200 components = 7.54833e-05 Jy
! Clean residual min=-0.004144 max=0.005324 Jy/beam
! Clean residual mean=-0.000038 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.563137 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 159 components and 0.563137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071457Jy  sigma=0.952385
! Fit after  self-cal, rms=0.071434Jy  sigma=0.952081
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164928 Jy
! Component: 100  -  total flux cleaned = 5.26367e-05 Jy
! Component: 150  -  total flux cleaned = -4.25878e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010067 Jy
! Total flux subtracted in 200 components = -0.00010067 Jy
! Clean residual min=-0.004157 max=0.005106 Jy/beam
! Clean residual mean=-0.000041 rms=0.001580 Jy/beam
! Combined flux in latest and established models = 0.563036 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 170 components and 0.563036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071410Jy  sigma=0.951766
! Fit after  self-cal, rms=0.071400Jy  sigma=0.951642
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.761 mas, bmaj=25.55 mas, bpa=-18.22 degrees
! Estimated noise=1.30365 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.761 x 25.55 at -18.22 degrees (North through East)
! Clean map  min=-0.0064244  max=0.48646 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=26.62 mas, bpa=-17.59 degrees
! Estimated noise=2.12967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.387372 Jy
! Component: 100  -  total flux cleaned = 0.472868 Jy
! Component: 150  -  total flux cleaned = 0.500997 Jy
! Component: 200  -  total flux cleaned = 0.518233 Jy
! Total flux subtracted in 200 components = 0.518233 Jy
! Clean residual min=-0.011791 max=0.012638 Jy/beam
! Clean residual mean=-0.000120 rms=0.003511 Jy/beam
! Combined flux in latest and established models = 0.518232 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.518232 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.761 mas, bmaj=25.55 mas, bpa=-18.22 degrees
! Estimated noise=1.30365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198634 Jy
! Component: 100  -  total flux cleaned = 0.0308872 Jy
! Component: 150  -  total flux cleaned = 0.0357115 Jy
! Component: 200  -  total flux cleaned = 0.0373944 Jy
! Total flux subtracted in 200 components = 0.0373944 Jy
! Clean residual min=-0.006096 max=0.007112 Jy/beam
! Clean residual mean=-0.000049 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 0.555627 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 74 components and 0.555627 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=24.91 mas, bpa=-27.28 degrees
! Estimated noise=1.47514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291243 Jy
! Component: 100  -  total flux cleaned = 0.00369201 Jy
! Component: 150  -  total flux cleaned = 0.00442841 Jy
! Component: 200  -  total flux cleaned = 0.00492989 Jy
! Total flux subtracted in 200 components = 0.00492989 Jy
! Clean residual min=-0.004829 max=0.006221 Jy/beam
! Clean residual mean=-0.000050 rms=0.001883 Jy/beam
! Combined flux in latest and established models = 0.560557 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495112 Jy
! Component: 100  -  total flux cleaned = 0.00070427 Jy
! Component: 150  -  total flux cleaned = 0.00076586 Jy
! Component: 200  -  total flux cleaned = 0.000822941 Jy
! Total flux subtracted in 200 components = 0.000822941 Jy
! Clean residual min=-0.004594 max=0.005836 Jy/beam
! Clean residual mean=-0.000047 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 0.56138 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 132 components and 0.561379 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.761 mas, bmaj=25.55 mas, bpa=-18.22 degrees
! Estimated noise=1.30365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152983 Jy
! Component: 100  -  total flux cleaned = -0.00140586 Jy
! Component: 150  -  total flux cleaned = -0.00140116 Jy
! Component: 200  -  total flux cleaned = -0.00129749 Jy
! Total flux subtracted in 200 components = -0.00129749 Jy
! Clean residual min=-0.004718 max=0.005373 Jy/beam
! Clean residual mean=-0.000036 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 0.560082 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 150 components and 0.560082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071743Jy  sigma=0.955919
! Fit after  self-cal, rms=0.071636Jy  sigma=0.954732
wmodel J2337-0230_S_map.mod
! Writing 150 model components to file: J2337-0230_S_map.mod
wobs   J2337-0230_S_uvs.fits
! Writing UV FITS file: J2337-0230_S_uvs.fits
wwins  J2337-0230_S_map.win
! wwins: Wrote 1 windows to J2337-0230_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243822 Jy
! Component: 100  -  total flux cleaned = 0.00334556 Jy
! Component: 150  -  total flux cleaned = 0.00416222 Jy
! Component: 200  -  total flux cleaned = 0.00403727 Jy
! Component: 250  -  total flux cleaned = 0.00384631 Jy
! Component: 300  -  total flux cleaned = 0.00360324 Jy
! Component: 350  -  total flux cleaned = 0.00348903 Jy
! Component: 400  -  total flux cleaned = 0.00337877 Jy
! Component: 450  -  total flux cleaned = 0.00322303 Jy
! Component: 500  -  total flux cleaned = 0.00307385 Jy
! Component: 550  -  total flux cleaned = 0.00292833 Jy
! Component: 600  -  total flux cleaned = 0.00274171 Jy
! Component: 650  -  total flux cleaned = 0.00260648 Jy
! Component: 700  -  total flux cleaned = 0.0024311 Jy
! Component: 750  -  total flux cleaned = 0.00221866 Jy
! Component: 800  -  total flux cleaned = 0.00205496 Jy
! Component: 850  -  total flux cleaned = 0.00193682 Jy
! Component: 900  -  total flux cleaned = 0.0020536 Jy
! Component: 950  -  total flux cleaned = 0.00212849 Jy
! Component: 1000  -  total flux cleaned = 0.00234845 Jy
! Component: 1050  -  total flux cleaned = 0.00242053 Jy
! Component: 1100  -  total flux cleaned = 0.0025616 Jy
! Component: 1150  -  total flux cleaned = 0.00266559 Jy
! Component: 1200  -  total flux cleaned = 0.00280203 Jy
! Component: 1250  -  total flux cleaned = 0.0029029 Jy
! Component: 1300  -  total flux cleaned = 0.00300152 Jy
! Component: 1350  -  total flux cleaned = 0.00296887 Jy
! Component: 1400  -  total flux cleaned = 0.00296889 Jy
! Component: 1450  -  total flux cleaned = 0.00287415 Jy
! Component: 1500  -  total flux cleaned = 0.00293659 Jy
! Component: 1550  -  total flux cleaned = 0.00287501 Jy
! Component: 1600  -  total flux cleaned = 0.00287528 Jy
! Component: 1650  -  total flux cleaned = 0.00284522 Jy
! Component: 1700  -  total flux cleaned = 0.00287461 Jy
! Component: 1750  -  total flux cleaned = 0.00278605 Jy
! Component: 1800  -  total flux cleaned = 0.00287327 Jy
! Component: 1850  -  total flux cleaned = 0.00281557 Jy
! Component: 1900  -  total flux cleaned = 0.00272959 Jy
! Component: 1950  -  total flux cleaned = 0.00272892 Jy
! Component: 2000  -  total flux cleaned = 0.00258776 Jy
! Component: 2050  -  total flux cleaned = 0.00258795 Jy
! Component: 2100  -  total flux cleaned = 0.0025045 Jy
! Component: 2150  -  total flux cleaned = 0.00250466 Jy
! Component: 2200  -  total flux cleaned = 0.00244963 Jy
! Component: 2250  -  total flux cleaned = 0.00244975 Jy
! Component: 2300  -  total flux cleaned = 0.00242222 Jy
! Component: 2350  -  total flux cleaned = 0.00236779 Jy
! Component: 2400  -  total flux cleaned = 0.00234078 Jy
! Component: 2450  -  total flux cleaned = 0.00228691 Jy
! Component: 2500  -  total flux cleaned = 0.00223319 Jy
! Component: 2550  -  total flux cleaned = 0.00220645 Jy
! Component: 2600  -  total flux cleaned = 0.00218003 Jy
! Component: 2650  -  total flux cleaned = 0.00215342 Jy
! Component: 2700  -  total flux cleaned = 0.00215336 Jy
! Component: 2750  -  total flux cleaned = 0.00210085 Jy
! Component: 2800  -  total flux cleaned = 0.00210083 Jy
! Component: 2850  -  total flux cleaned = 0.00202225 Jy
! Component: 2900  -  total flux cleaned = 0.00196986 Jy
! Component: 2950  -  total flux cleaned = 0.00199574 Jy
! Component: 3000  -  total flux cleaned = 0.00204746 Jy
! Component: 3050  -  total flux cleaned = 0.0020736 Jy
! Component: 3100  -  total flux cleaned = 0.00212578 Jy
! Component: 3150  -  total flux cleaned = 0.00217798 Jy
! Component: 3200  -  total flux cleaned = 0.00223019 Jy
! Component: 3250  -  total flux cleaned = 0.00220415 Jy
! Component: 3300  -  total flux cleaned = 0.002309 Jy
! Component: 3350  -  total flux cleaned = 0.00236146 Jy
! Component: 3400  -  total flux cleaned = 0.00244051 Jy
! Component: 3450  -  total flux cleaned = 0.00249344 Jy
! Component: 3500  -  total flux cleaned = 0.00257275 Jy
! Component: 3550  -  total flux cleaned = 0.00265236 Jy
! Component: 3600  -  total flux cleaned = 0.0027324 Jy
! Component: 3650  -  total flux cleaned = 0.0027861 Jy
! Component: 3700  -  total flux cleaned = 0.00289351 Jy
! Component: 3750  -  total flux cleaned = 0.00297428 Jy
! Component: 3800  -  total flux cleaned = 0.00302835 Jy
! Component: 3850  -  total flux cleaned = 0.00308275 Jy
! Component: 3900  -  total flux cleaned = 0.00319202 Jy
! Component: 3950  -  total flux cleaned = 0.00327442 Jy
! Component: 4000  -  total flux cleaned = 0.00341233 Jy
! Component: 4050  -  total flux cleaned = 0.00352318 Jy
! Total flux subtracted in 4096 components = 0.00366248 Jy
! Clean residual min=-0.001680 max=0.001587 Jy/beam
! Clean residual mean=-0.000038 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.563744 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 403 components and 0.563744 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv102_uvs/J2337-0230_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.761 x 25.55 at -18.22 degrees (North through East)
! Clean map  min=-0.0053028  max=0.49373 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2337-0230_S_map.fits
wmodel /scr/pima/rv102_uvs/J2337-0230_S_map.mod
! Writing 403 model components to file: /scr/pima/rv102_uvs/J2337-0230_S_map.mod
wobs   /scr/pima/rv102_uvs/J2337-0230_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J2337-0230_S_uvs.fits
wwins  /scr/pima/rv102_uvs/J2337-0230_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J2337-0230_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.493731 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000534146 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.324557 0.324557 0.649114 1.29823 2.59645 5.19291 10.3858 20.7716 41.5433 83.0865
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.493 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  924.337 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J2337-0230_S_dfm.log closed on Sat Nov  9 09:37:22 2019