! Started logfile: /scr/pima/rv102_uvs/J2230+6946_S_dfm.log on Sat Nov 9 09:36:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J2230+6946_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2230+6946_S_uva.fits ! AN table 1: 60 integrations on 10 of 10 possible baselines. ! AN table 2: 2 integrations on 6 of 6 possible baselines. ! AN table 3: 18 integrations on 66 of 66 possible baselines. ! AN table 4: 3 integrations on 1 of 1 possible baselines. ! AN table 5: 3 integrations on 28 of 28 possible baselines. ! AN table 6: 2 integrations on 36 of 36 possible baselines. ! AN table 7: 43 integrations on 6 of 6 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 4 integrations on 1 of 1 possible baselines. ! AN table 10: 36 integrations on 3 of 3 possible baselines. ! AN table 11: 10 integrations on 6 of 6 possible baselines. ! AN table 12: 10 integrations on 55 of 55 possible baselines. ! AN table 13: 10 integrations on 15 of 15 possible baselines. ! AN table 14: 2 integrations on 21 of 21 possible baselines. ! AN table 15: 6 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.893669 visibilities/baseline/integration-bin. ! Found source: J2230+6946 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 11800 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 30 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 82 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 108 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 41 telescope corrections were flagged in sub-array 12. ! A total of 25 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 30 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 82 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 108 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 41 telescope corrections were flagged in sub-array 12. ! A total of 25 telescope corrections were flagged in sub-array 13. ! ! Fit before self-cal, rms=1.175928Jy sigma=8.890377 ! Fit after self-cal, rms=0.497364Jy sigma=3.851631 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=3.222 mas, bpa=-26.36 degrees ! Estimated noise=1.67217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407514 Jy ! Component: 100 - total flux cleaned = 0.497035 Jy ! Total flux subtracted in 100 components = 0.497035 Jy ! Clean residual min=-0.014933 max=0.029002 Jy/beam ! Clean residual mean=0.000009 rms=0.003269 Jy/beam ! Combined flux in latest and established models = 0.497035 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.497035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268383Jy sigma=0.963087 ! Fit after self-cal, rms=0.268359Jy sigma=0.963046 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325233 Jy ! Component: 100 - total flux cleaned = 0.0510977 Jy ! Total flux subtracted in 100 components = 0.0510977 Jy ! Clean residual min=-0.013585 max=0.017545 Jy/beam ! Clean residual mean=-0.000004 rms=0.002980 Jy/beam ! Combined flux in latest and established models = 0.548133 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.548133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259271Jy sigma=0.906459 ! Fit after self-cal, rms=0.259229Jy sigma=0.906356 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=3.51 mas, bpa=-22.79 degrees ! Estimated noise=1.11947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118593 Jy ! Component: 100 - total flux cleaned = 0.0123923 Jy ! Component: 150 - total flux cleaned = 0.0125462 Jy ! Component: 200 - total flux cleaned = 0.0125347 Jy ! Total flux subtracted in 200 components = 0.0125347 Jy ! Clean residual min=-0.012001 max=0.009362 Jy/beam ! Clean residual mean=0.000068 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.560667 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.560667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256663Jy sigma=0.907591 ! Fit after self-cal, rms=0.256651Jy sigma=0.907479 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.629 x 3.51 at -22.79 degrees (North through East) ! Clean map min=-0.011042 max=0.52886 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.69 NY 0.99 ON 0.97 WF 1.03 ! WZ 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.03 LA 1.01 PT 1.00 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 1.05 KP 0.98 LA 1.03 ! MA 0.80 MK 0.91 NY 0.99 ON 1.10 ! PT 1.03 SC 1.04 WF 1.01 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.95 HN 1.06 KP 1.04 LA 1.06 ! MK 1.19 NL 1.00 NY 1.07 PT 1.09 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.97 HN 1.00 KP 1.04 LA 0.96 ! MK 1.33 NL 1.03 PT 1.00 SC 0.99 ! WF 1.09 ! ! A total of 30 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.73 NY 1.11 ON 1.02 WZ 0.93 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 1.02 ON 1.03 WF 0.97 WZ 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 1.05 HN 1.06 KP 0.99 LA 1.03 ! MA 0.91 NL 1.00 NY 0.97 ON 0.94 ! PT 1.02 WF 1.00 WZ 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00 MA 0.50 NY 1.03 ON 1.10 ! WF 1.00 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.07 HN 0.96 LA 1.03 NL 1.06 ! NY 1.10 PT 0.99 SC 0.93 ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.09 HN 0.98 LA 0.98 NL 0.98 ! PT 0.95 SC 1.02 WF 1.02 WZ 0.99 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.01 ON 0.97 WF 1.02 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.06 LA 0.98 PT 1.01 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.05 KP 0.99 LA 1.02 ! MA 1.00* MK 1.08 NY 0.99 ON 1.01 ! PT 1.01 SC 1.02 WF 1.02 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.02 KP 1.03 LA 1.01 ! MK 1.07 NL 1.03 NY 1.07 PT 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00 HN 1.03 KP 0.98 LA 1.00 ! MK 1.09 NL 0.99 PT 1.02 SC 1.05 ! WF 1.04 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 1.15 ON 1.03 WF 0.98 WZ 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 1.05 HN 0.97 KP 1.04 LA 1.02 ! MA 1.00* NL 1.03 NY 0.99 ON 1.02 ! PT 1.04 WF 1.03 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.01 MA 1.00* NY 1.03 ON 0.99 ! WF 1.04 WZ 1.05 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.01 HN 0.96 LA 1.05 NL 1.03 ! NY 1.01 PT 0.99 SC 1.00 ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.09 HN 1.00 LA 0.98 NL 0.99 ! PT 1.00 SC 1.03 WF 1.00 WZ 0.99 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.50 NY 0.97 ON 1.03 WF 0.98 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.12 LA 1.04 PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.04 KP 0.99 LA 1.00 ! MA 0.55 MK 1.04 NY 0.98 ON 1.01 ! PT 1.02 SC 1.06 WF 1.03 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.03 KP 1.05 LA 1.01 ! MK 1.09 NL 1.01 NY 1.10 PT 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.97 HN 1.03 KP 0.99 LA 1.02 ! MK 1.15 NL 1.01 PT 1.03 SC 0.99 ! WF 1.03 ! ! A total of 30 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.48 NY 1.03 ON 0.91 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* ! ! A total of 72 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 1.06 ON 1.00 WF 0.86 WZ 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 1.03 HN 0.99 KP 1.00 LA 1.04 ! MA 0.45 NL 1.01 NY 1.06 ON 0.98 ! PT 1.03 WF 0.93 WZ 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.92 MA 0.45 NY 1.09 ON 0.96 ! WF 1.15 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.08 HN 0.99 LA 1.00 NL 1.00 ! NY 1.00 PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.06 HN 0.99 LA 1.01 NL 0.98 ! PT 0.95 SC 1.01 WF 1.03 WZ 1.00 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 0.97 ON 0.99 WF 1.04 ! WZ 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.11 LA 0.98 PT 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 1.06 KP 0.97 LA 1.02 ! MA 1.00* MK 0.67 NY 1.01 ON 1.05 ! PT 1.02 SC 1.02 WF 0.99 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 HN 1.00 KP 1.02 LA 1.04 ! MK 2.19 NL 0.99 NY 1.05 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.96 HN 1.03 KP 0.98 LA 0.96 ! MK 2.06 NL 0.98 PT 1.02 SC 0.97 ! WF 1.08 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 1.03 ON 1.02 WF 0.87 WZ 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 1.05 HN 1.06 KP 0.99 LA 1.01 ! MA 1.00* NL 0.97 NY 1.06 ON 1.03 ! PT 0.99 WF 0.95 WZ 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.09 MA 1.00* NY 0.90 ON 1.00 ! WF 1.12 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.01 HN 0.97 LA 0.99 NL 0.99 ! NY 0.92 PT 1.02 SC 1.15 ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.02 HN 1.02 LA 1.02 NL 0.95 ! PT 0.95 SC 1.03 WF 1.02 WZ 0.97 ! ! ! Fit before self-cal, rms=0.256651Jy sigma=0.907479 ! Fit after self-cal, rms=0.159321Jy sigma=0.784969 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=3.464 mas, bpa=-21.61 degrees ! Estimated noise=1.11831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828361 Jy ! Component: 100 - total flux cleaned = 0.0127619 Jy ! Component: 150 - total flux cleaned = 0.0150446 Jy ! Component: 200 - total flux cleaned = 0.0160428 Jy ! Total flux subtracted in 200 components = 0.0160428 Jy ! Clean residual min=-0.003757 max=0.005172 Jy/beam ! Clean residual mean=0.000253 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.57671 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.57671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158853Jy sigma=0.778882 ! Fit after self-cal, rms=0.158540Jy sigma=0.778180 ! Inverting map ! Added new window around map position (6.5, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461068 Jy ! Component: 100 - total flux cleaned = 0.00638459 Jy ! Component: 150 - total flux cleaned = 0.00706611 Jy ! Component: 200 - total flux cleaned = 0.0075004 Jy ! Total flux subtracted in 200 components = 0.0075004 Jy ! Clean residual min=-0.003866 max=0.004049 Jy/beam ! Clean residual mean=0.000184 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.584211 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.584211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158365Jy sigma=0.776390 ! Fit after self-cal, rms=0.158358Jy sigma=0.776262 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158358Jy sigma=0.776262 ! Fit after self-cal, rms=0.156988Jy sigma=0.767926 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=3.464 mas, bpa=-21.61 degrees ! Estimated noise=1.12016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289631 Jy ! Component: 100 - total flux cleaned = 0.00482329 Jy ! Component: 150 - total flux cleaned = 0.00608894 Jy ! Component: 200 - total flux cleaned = 0.00660207 Jy ! Total flux subtracted in 200 components = 0.00660207 Jy ! Clean residual min=-0.003154 max=0.003708 Jy/beam ! Clean residual mean=0.000127 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.590813 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.590813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156911Jy sigma=0.766942 ! Fit after self-cal, rms=0.156931Jy sigma=0.766859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385518 Jy ! Component: 100 - total flux cleaned = 0.00601817 Jy ! Component: 150 - total flux cleaned = 0.00637964 Jy ! Component: 200 - total flux cleaned = 0.00625864 Jy ! Total flux subtracted in 200 components = 0.00625864 Jy ! Clean residual min=-0.003134 max=0.003386 Jy/beam ! Clean residual mean=0.000067 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.597071 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.597071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156810Jy sigma=0.765463 ! Fit after self-cal, rms=0.156786Jy sigma=0.765288 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156786Jy sigma=0.765288 ! Fit after self-cal, rms=0.156662Jy sigma=0.763083 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=3.459 mas, bpa=-21.55 degrees ! Estimated noise=1.12184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247583 Jy ! Component: 100 - total flux cleaned = 0.00329673 Jy ! Component: 150 - total flux cleaned = 0.00346416 Jy ! Component: 200 - total flux cleaned = 0.00346338 Jy ! Total flux subtracted in 200 components = 0.00346338 Jy ! Clean residual min=-0.003107 max=0.003361 Jy/beam ! Clean residual mean=0.000037 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.600535 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.600535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156597Jy sigma=0.762459 ! Fit after self-cal, rms=0.156600Jy sigma=0.762362 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (106, -99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289196 Jy ! Component: 100 - total flux cleaned = 0.00366645 Jy ! Component: 150 - total flux cleaned = 0.00429511 Jy ! Component: 200 - total flux cleaned = 0.00457117 Jy ! Total flux subtracted in 200 components = 0.00457117 Jy ! Clean residual min=-0.002970 max=0.003360 Jy/beam ! Clean residual mean=0.000025 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.605106 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.605106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156504Jy sigma=0.761471 ! Fit after self-cal, rms=0.156499Jy sigma=0.761400 ! Inverting map ! Added new window around map position (76, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017213 Jy ! Component: 100 - total flux cleaned = 0.00202969 Jy ! Component: 150 - total flux cleaned = 0.00245503 Jy ! Component: 200 - total flux cleaned = 0.00261678 Jy ! Total flux subtracted in 200 components = 0.00261678 Jy ! Clean residual min=-0.002900 max=0.003108 Jy/beam ! Clean residual mean=0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.607723 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.607723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156407Jy sigma=0.760616 ! Fit after self-cal, rms=0.156387Jy sigma=0.760550 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156387Jy sigma=0.760550 ! Fit after self-cal, rms=0.156258Jy sigma=0.760373 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.539 mas, bmaj=8.468 mas, bpa=29.68 degrees ! Estimated noise=1.74852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115103 Jy ! Component: 100 - total flux cleaned = 0.0011674 Jy ! Component: 150 - total flux cleaned = 0.00122641 Jy ! Component: 200 - total flux cleaned = 0.00117884 Jy ! Total flux subtracted in 200 components = 0.00117884 Jy ! Clean residual min=-0.003934 max=0.004835 Jy/beam ! Clean residual mean=0.000037 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.608901 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 150 components and 0.608901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156253Jy sigma=0.760209 ! Fit after self-cal, rms=0.156253Jy sigma=0.760166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019997 Jy ! Component: 100 - total flux cleaned = 6.03075e-05 Jy ! Component: 150 - total flux cleaned = -0.000104912 Jy ! Component: 200 - total flux cleaned = -0.000179135 Jy ! Total flux subtracted in 200 components = -0.000179135 Jy ! Clean residual min=-0.003900 max=0.004809 Jy/beam ! Clean residual mean=0.000042 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.608722 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 157 components and 0.608722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156261Jy sigma=0.760180 ! Fit after self-cal, rms=0.156263Jy sigma=0.760170 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=3.458 mas, bpa=-21.55 degrees ! Estimated noise=1.12252 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.573 x 3.458 at -21.55 degrees (North through East) ! Clean map min=-0.0027089 max=0.52692 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156263Jy sigma=0.760170 ! Fit after self-cal, rms=0.160059Jy sigma=0.666453 ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=3.456 mas, bpa=-21.51 degrees ! Estimated noise=1.12207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419637 Jy ! Component: 100 - total flux cleaned = 0.000540118 Jy ! Component: 150 - total flux cleaned = 0.000705735 Jy ! Component: 200 - total flux cleaned = 0.000759434 Jy ! Total flux subtracted in 200 components = 0.000759434 Jy ! Clean residual min=-0.002961 max=0.002987 Jy/beam ! Clean residual mean=-0.000035 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.609482 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 171 components and 0.609481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160004Jy sigma=0.666062 ! Fit after self-cal, rms=0.160008Jy sigma=0.666047 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369043 Jy ! Component: 100 - total flux cleaned = 0.000464864 Jy ! Component: 150 - total flux cleaned = 0.00046417 Jy ! Component: 200 - total flux cleaned = 0.000508452 Jy ! Total flux subtracted in 200 components = 0.000508452 Jy ! Clean residual min=-0.002953 max=0.003007 Jy/beam ! Clean residual mean=-0.000039 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.60999 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 177 components and 0.60999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159975Jy sigma=0.665801 ! Fit after self-cal, rms=0.159974Jy sigma=0.665796 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159974Jy sigma=0.665796 ! Fit after self-cal, rms=0.160169Jy sigma=0.665734 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=3.172 mas, bpa=-25.55 degrees ! Estimated noise=1.68094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407868 Jy ! Component: 100 - total flux cleaned = 0.49748 Jy ! Component: 150 - total flux cleaned = 0.527379 Jy ! Component: 200 - total flux cleaned = 0.542882 Jy ! Total flux subtracted in 200 components = 0.542882 Jy ! Clean residual min=-0.007168 max=0.008167 Jy/beam ! Clean residual mean=0.000006 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.542882 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.542882 Jy ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=3.455 mas, bpa=-21.52 degrees ! Estimated noise=1.12306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151744 Jy ! Component: 100 - total flux cleaned = 0.0254347 Jy ! Component: 150 - total flux cleaned = 0.0332532 Jy ! Component: 200 - total flux cleaned = 0.0394602 Jy ! Total flux subtracted in 200 components = 0.0394602 Jy ! Clean residual min=-0.003708 max=0.004441 Jy/beam ! Clean residual mean=0.000197 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.582343 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.582343 Jy ! Inverting map ! Added new window around map position (15, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005126 Jy ! Component: 100 - total flux cleaned = 0.00892683 Jy ! Component: 150 - total flux cleaned = 0.0123898 Jy ! Component: 200 - total flux cleaned = 0.014882 Jy ! Total flux subtracted in 200 components = 0.014882 Jy ! Clean residual min=-0.002995 max=0.003391 Jy/beam ! Clean residual mean=0.000075 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.597225 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 77 components and 0.597225 Jy ! Inverting map ! Added new window around map position (46.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313837 Jy ! Component: 100 - total flux cleaned = 0.00510775 Jy ! Component: 150 - total flux cleaned = 0.00690782 Jy ! Component: 200 - total flux cleaned = 0.00836478 Jy ! Total flux subtracted in 200 components = 0.00836478 Jy ! Clean residual min=-0.002900 max=0.003147 Jy/beam ! Clean residual mean=-0.000008 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.605589 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 101 components and 0.605589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.53 mas, bmaj=8.458 mas, bpa=29.93 degrees ! Estimated noise=1.75412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440402 Jy ! Component: 100 - total flux cleaned = 0.00662318 Jy ! Component: 150 - total flux cleaned = 0.0067836 Jy ! Component: 200 - total flux cleaned = 0.00671635 Jy ! Total flux subtracted in 200 components = 0.00671635 Jy ! Clean residual min=-0.004374 max=0.003562 Jy/beam ! Clean residual mean=-0.000211 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.612306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79601e-06 Jy ! Component: 100 - total flux cleaned = -5.28113e-05 Jy ! Component: 150 - total flux cleaned = -4.22262e-06 Jy ! Component: 200 - total flux cleaned = -4.92937e-05 Jy ! Total flux subtracted in 200 components = -4.92937e-05 Jy ! Clean residual min=-0.004304 max=0.003661 Jy/beam ! Clean residual mean=-0.000207 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.612256 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 167 components and 0.612256 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=3.455 mas, bpa=-21.52 degrees ! Estimated noise=1.12306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578085 Jy ! Component: 100 - total flux cleaned = 0.00080403 Jy ! Component: 150 - total flux cleaned = 0.000941851 Jy ! Component: 200 - total flux cleaned = 0.00100725 Jy ! Total flux subtracted in 200 components = 0.00100725 Jy ! Clean residual min=-0.002865 max=0.002954 Jy/beam ! Clean residual mean=-0.000067 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.613264 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 179 components and 0.613263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160127Jy sigma=0.665588 ! Fit after self-cal, rms=0.160156Jy sigma=0.665388 wmodel J2230+6946_S_map.mod ! Writing 179 model components to file: J2230+6946_S_map.mod wobs J2230+6946_S_uvs.fits ! Writing UV FITS file: J2230+6946_S_uvs.fits wwins J2230+6946_S_map.win ! wwins: Wrote 8 windows to J2230+6946_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335432 Jy ! Component: 100 - total flux cleaned = 0.000439896 Jy ! Component: 150 - total flux cleaned = 0.000489956 Jy ! Component: 200 - total flux cleaned = 0.000439964 Jy ! Component: 250 - total flux cleaned = 0.000198511 Jy ! Component: 300 - total flux cleaned = 0.000151075 Jy ! Component: 350 - total flux cleaned = -3.58317e-05 Jy ! Component: 400 - total flux cleaned = -0.000265187 Jy ! Component: 450 - total flux cleaned = -0.000400993 Jy ! Component: 500 - total flux cleaned = -0.000624658 Jy ! Component: 550 - total flux cleaned = -0.000757234 Jy ! Component: 600 - total flux cleaned = -0.000975982 Jy ! Component: 650 - total flux cleaned = -0.00106206 Jy ! Component: 700 - total flux cleaned = -0.00123338 Jy ! Component: 750 - total flux cleaned = -0.00127554 Jy ! Component: 800 - total flux cleaned = -0.00140154 Jy ! Component: 850 - total flux cleaned = -0.00148503 Jy ! Component: 900 - total flux cleaned = -0.00160911 Jy ! Component: 950 - total flux cleaned = -0.00164963 Jy ! Component: 1000 - total flux cleaned = -0.00169001 Jy ! Component: 1050 - total flux cleaned = -0.00177105 Jy ! Component: 1100 - total flux cleaned = -0.00189064 Jy ! Component: 1150 - total flux cleaned = -0.00189058 Jy ! Component: 1200 - total flux cleaned = -0.00189078 Jy ! Component: 1250 - total flux cleaned = -0.00200863 Jy ! Component: 1300 - total flux cleaned = -0.00216431 Jy ! Component: 1350 - total flux cleaned = -0.00212496 Jy ! Component: 1400 - total flux cleaned = -0.00204814 Jy ! Component: 1450 - total flux cleaned = -0.00220115 Jy ! Component: 1500 - total flux cleaned = -0.00216326 Jy ! Component: 1550 - total flux cleaned = -0.002201 Jy ! Component: 1600 - total flux cleaned = -0.00223904 Jy ! Component: 1650 - total flux cleaned = -0.00235125 Jy ! Component: 1700 - total flux cleaned = -0.00242537 Jy ! Component: 1750 - total flux cleaned = -0.00242534 Jy ! Component: 1800 - total flux cleaned = -0.00238843 Jy ! Component: 1850 - total flux cleaned = -0.00249849 Jy ! Component: 1900 - total flux cleaned = -0.00253484 Jy ! Component: 1950 - total flux cleaned = -0.00264391 Jy ! Component: 2000 - total flux cleaned = -0.00271625 Jy ! Component: 2050 - total flux cleaned = -0.0028602 Jy ! Component: 2100 - total flux cleaned = -0.00289594 Jy ! Component: 2150 - total flux cleaned = -0.00296746 Jy ! Component: 2200 - total flux cleaned = -0.00307406 Jy ! Component: 2250 - total flux cleaned = -0.0031096 Jy ! Component: 2300 - total flux cleaned = -0.0031802 Jy ! Component: 2350 - total flux cleaned = -0.00325038 Jy ! Component: 2400 - total flux cleaned = -0.00339046 Jy ! Component: 2450 - total flux cleaned = -0.00346002 Jy ! Component: 2500 - total flux cleaned = -0.00339059 Jy ! Component: 2550 - total flux cleaned = -0.00349442 Jy ! Component: 2600 - total flux cleaned = -0.00352889 Jy ! Component: 2650 - total flux cleaned = -0.00359746 Jy ! Component: 2700 - total flux cleaned = -0.00359758 Jy ! Component: 2750 - total flux cleaned = -0.00363167 Jy ! Component: 2800 - total flux cleaned = -0.00376724 Jy ! Component: 2850 - total flux cleaned = -0.00366588 Jy ! Component: 2900 - total flux cleaned = -0.0037334 Jy ! Component: 2950 - total flux cleaned = -0.00386778 Jy ! Component: 3000 - total flux cleaned = -0.00390123 Jy ! Component: 3050 - total flux cleaned = -0.00383451 Jy ! Component: 3100 - total flux cleaned = -0.00390097 Jy ! Component: 3150 - total flux cleaned = -0.0039341 Jy ! Component: 3200 - total flux cleaned = -0.00393424 Jy ! Component: 3250 - total flux cleaned = -0.00403303 Jy ! Component: 3300 - total flux cleaned = -0.004033 Jy ! Component: 3350 - total flux cleaned = -0.00403303 Jy ! Component: 3400 - total flux cleaned = -0.00406556 Jy ! Component: 3450 - total flux cleaned = -0.0041629 Jy ! Component: 3500 - total flux cleaned = -0.00416292 Jy ! Component: 3550 - total flux cleaned = -0.00419516 Jy ! Component: 3600 - total flux cleaned = -0.0042272 Jy ! Component: 3650 - total flux cleaned = -0.00419519 Jy ! Component: 3700 - total flux cleaned = -0.00422724 Jy ! Component: 3750 - total flux cleaned = -0.00432273 Jy ! Component: 3800 - total flux cleaned = -0.00425926 Jy ! Component: 3850 - total flux cleaned = -0.00425925 Jy ! Component: 3900 - total flux cleaned = -0.00438566 Jy ! Component: 3950 - total flux cleaned = -0.00432274 Jy ! Component: 4000 - total flux cleaned = -0.00435409 Jy ! Component: 4050 - total flux cleaned = -0.00441678 Jy ! Total flux subtracted in 4096 components = -0.00444798 Jy ! Clean residual min=-0.001942 max=0.002029 Jy/beam ! Clean residual mean=-0.000033 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.608815 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 521 components and 0.608816 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2230+6946_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.57 x 3.455 at -21.52 degrees (North through East) ! Clean map min=-0.0027231 max=0.52596 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2230+6946_S_map.fits wmodel /scr/pima/rv102_uvs/J2230+6946_S_map.mod ! Writing 521 model components to file: /scr/pima/rv102_uvs/J2230+6946_S_map.mod wobs /scr/pima/rv102_uvs/J2230+6946_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2230+6946_S_uvs.fits wwins /scr/pima/rv102_uvs/J2230+6946_S_map.win ! wwins: Wrote 9 windows to /scr/pima/rv102_uvs/J2230+6946_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.525957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000547087 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.312052 0.312052 0.624104 1.24821 2.49642 4.99283 9.98567 19.9713 39.9427 79.8853 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.525 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 961.378 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2230+6946_S_dfm.log closed on Sat Nov 9 09:37:00 2019