! Started logfile: /scr/pima/rv102_uvs/J2210+2013_X_dfm.log on Sat Nov 9 10:22:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J2210+2013_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2210+2013_X_uva.fits ! AN table 1: 87 integrations on 21 of 21 possible baselines. ! AN table 2: 87 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.988506 visibilities/baseline/integration-bin. ! Found source: J2210+2013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 14448 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2210+2013_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.023510Jy sigma=19.306322 ! Fit after self-cal, rms=0.778854Jy sigma=14.737016 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7083 mas, bmaj=1.312 mas, bpa=-8.379 degrees ! Estimated noise=0.637132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176743 Jy ! Component: 100 - total flux cleaned = 0.215285 Jy ! Total flux subtracted in 100 components = 0.215285 Jy ! Clean residual min=-0.006640 max=0.010753 Jy/beam ! Clean residual mean=0.000018 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.215285 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.215285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112585Jy sigma=1.867368 ! Fit after self-cal, rms=0.112575Jy sigma=1.867333 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00918728 Jy ! Component: 100 - total flux cleaned = 0.0136194 Jy ! Total flux subtracted in 100 components = 0.0136194 Jy ! Clean residual min=-0.005591 max=0.006347 Jy/beam ! Clean residual mean=0.000007 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.228904 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.228904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111636Jy sigma=1.851825 ! Fit after self-cal, rms=0.111635Jy sigma=1.851700 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9274 mas, bmaj=1.683 mas, bpa=-8.036 degrees ! Estimated noise=0.320879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297122 Jy ! Component: 100 - total flux cleaned = 0.00421494 Jy ! Component: 150 - total flux cleaned = 0.00440421 Jy ! Component: 200 - total flux cleaned = 0.00445387 Jy ! Total flux subtracted in 200 components = 0.00445387 Jy ! Clean residual min=-0.004353 max=0.004063 Jy/beam ! Clean residual mean=0.000001 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.233358 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.233358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111547Jy sigma=1.850416 ! Fit after self-cal, rms=0.111548Jy sigma=1.850360 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9274 x 1.683 at -8.036 degrees (North through East) ! Clean map min=-0.0041095 max=0.22688 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.03 KP 0.99 LA 1.00 ! MK 1.01 PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 0.91 KP 1.00 LA 1.02 ! MK 1.03 NL 1.09 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.04 KP 0.98 LA 0.99 ! MK 0.99 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 0.94 KP 0.99 LA 0.99 ! MK 1.00 NL 1.04 PT 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.00 KP 0.99 LA 0.99 ! MK 0.96 PT 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.87 KP 1.00 LA 0.98 ! MK 0.97 NL 1.05 PT 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.06 KP 0.99 LA 0.97 ! MK 0.96 PT 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.85 KP 0.97 LA 0.98 ! MK 1.02 NL 1.11 PT 1.00 ! ! ! Fit before self-cal, rms=0.111548Jy sigma=1.850360 ! Fit after self-cal, rms=0.107132Jy sigma=1.837866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9286 mas, bmaj=1.678 mas, bpa=-8.063 degrees ! Estimated noise=0.320348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.18451e-05 Jy ! Component: 100 - total flux cleaned = 0.000103935 Jy ! Component: 150 - total flux cleaned = 0.000139553 Jy ! Component: 200 - total flux cleaned = 0.000171213 Jy ! Total flux subtracted in 200 components = 0.000171213 Jy ! Clean residual min=-0.002183 max=0.002482 Jy/beam ! Clean residual mean=0.000002 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.233529 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.233529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107125Jy sigma=1.837730 ! Fit after self-cal, rms=0.107063Jy sigma=1.837492 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107063Jy sigma=1.837492 ! Fit after self-cal, rms=0.106955Jy sigma=1.837478 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9289 mas, bmaj=1.677 mas, bpa=-8.106 degrees ! Estimated noise=0.320349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.8135e-05 Jy ! Component: 100 - total flux cleaned = 6.58343e-05 Jy ! Component: 150 - total flux cleaned = 9.66791e-05 Jy ! Component: 200 - total flux cleaned = 0.000123471 Jy ! Total flux subtracted in 200 components = 0.000123471 Jy ! Clean residual min=-0.002136 max=0.002427 Jy/beam ! Clean residual mean=0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.233653 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.233653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106951Jy sigma=1.837377 ! Fit after self-cal, rms=0.106948Jy sigma=1.837375 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176564 Jy ! Component: 100 - total flux cleaned = 0.00192093 Jy ! Component: 150 - total flux cleaned = 0.00188991 Jy ! Component: 200 - total flux cleaned = 0.00180851 Jy ! Total flux subtracted in 200 components = 0.00180851 Jy ! Clean residual min=-0.002035 max=0.002271 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.235461 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.235461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106906Jy sigma=1.836561 ! Fit after self-cal, rms=0.106906Jy sigma=1.836503 ! Inverting map ! Added new window around map position (-11.8, -35.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00066811 Jy ! Component: 100 - total flux cleaned = 0.00052604 Jy ! Component: 150 - total flux cleaned = 0.00059236 Jy ! Component: 200 - total flux cleaned = 0.000620815 Jy ! Total flux subtracted in 200 components = 0.000620815 Jy ! Clean residual min=-0.001980 max=0.001777 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.236082 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.236082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106858Jy sigma=1.835654 ! Fit after self-cal, rms=0.106853Jy sigma=1.835590 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106853Jy sigma=1.835590 ! Fit after self-cal, rms=0.106367Jy sigma=1.835471 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9283 mas, bmaj=1.675 mas, bpa=-8.105 degrees ! Estimated noise=0.319776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556554 Jy ! Component: 100 - total flux cleaned = 0.000704138 Jy ! Component: 150 - total flux cleaned = 0.000729739 Jy ! Component: 200 - total flux cleaned = 0.000729217 Jy ! Total flux subtracted in 200 components = 0.000729217 Jy ! Clean residual min=-0.001966 max=0.001801 Jy/beam ! Clean residual mean=-0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.236811 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.236811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106351Jy sigma=1.835209 ! Fit after self-cal, rms=0.106343Jy sigma=1.835201 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.83155e-05 Jy ! Component: 100 - total flux cleaned = 7.84645e-05 Jy ! Component: 150 - total flux cleaned = 7.7769e-05 Jy ! Component: 200 - total flux cleaned = 9.57773e-05 Jy ! Total flux subtracted in 200 components = 9.57773e-05 Jy ! Clean residual min=-0.001969 max=0.001820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.236907 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.236907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106335Jy sigma=1.835074 ! Fit after self-cal, rms=0.106336Jy sigma=1.835074 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106336Jy sigma=1.835074 ! Fit after self-cal, rms=0.106215Jy sigma=1.835051 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=3.109 mas, bpa=-44.49 degrees ! Estimated noise=0.416251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365377 Jy ! Component: 100 - total flux cleaned = 0.000365666 Jy ! Component: 150 - total flux cleaned = 0.000357395 Jy ! Component: 200 - total flux cleaned = 0.000349249 Jy ! Total flux subtracted in 200 components = 0.000349249 Jy ! Clean residual min=-0.001835 max=0.001607 Jy/beam ! Clean residual mean=-0.000003 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.237256 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.237256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106215Jy sigma=1.835039 ! Fit after self-cal, rms=0.106212Jy sigma=1.835026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33729e-05 Jy ! Component: 100 - total flux cleaned = -2.85583e-05 Jy ! Component: 150 - total flux cleaned = -4.3433e-05 Jy ! Component: 200 - total flux cleaned = -4.31756e-05 Jy ! Total flux subtracted in 200 components = -4.31756e-05 Jy ! Clean residual min=-0.001842 max=0.001590 Jy/beam ! Clean residual mean=-0.000003 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.237213 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.237213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106212Jy sigma=1.835027 ! Fit after self-cal, rms=0.106212Jy sigma=1.835021 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9283 mas, bmaj=1.675 mas, bpa=-8.113 degrees ! Estimated noise=0.319777 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9283 x 1.675 at -8.113 degrees (North through East) ! Clean map min=-0.0018199 max=0.22621 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7093 mas, bmaj=1.308 mas, bpa=-8.455 degrees ! Estimated noise=0.632142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175318 Jy ! Component: 100 - total flux cleaned = 0.213578 Jy ! Component: 150 - total flux cleaned = 0.223205 Jy ! Component: 200 - total flux cleaned = 0.226811 Jy ! Total flux subtracted in 200 components = 0.226811 Jy ! Clean residual min=-0.004222 max=0.004813 Jy/beam ! Clean residual mean=0.000007 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.226811 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.226811 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9283 mas, bmaj=1.675 mas, bpa=-8.113 degrees ! Estimated noise=0.319777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474169 Jy ! Component: 100 - total flux cleaned = 0.00663892 Jy ! Component: 150 - total flux cleaned = 0.00789423 Jy ! Component: 200 - total flux cleaned = 0.00886037 Jy ! Total flux subtracted in 200 components = 0.00886037 Jy ! Clean residual min=-0.002219 max=0.002055 Jy/beam ! Clean residual mean=0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.235671 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.235671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=3.109 mas, bpa=-44.49 degrees ! Estimated noise=0.416251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113691 Jy ! Component: 100 - total flux cleaned = 0.00129541 Jy ! Component: 150 - total flux cleaned = 0.00131401 Jy ! Component: 200 - total flux cleaned = 0.00134716 Jy ! Total flux subtracted in 200 components = 0.00134716 Jy ! Clean residual min=-0.001981 max=0.001636 Jy/beam ! Clean residual mean=-0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.237018 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.47705e-05 Jy ! Component: 100 - total flux cleaned = 7.19598e-05 Jy ! Component: 150 - total flux cleaned = 8.45418e-05 Jy ! Component: 200 - total flux cleaned = 0.000107636 Jy ! Total flux subtracted in 200 components = 0.000107636 Jy ! Clean residual min=-0.001936 max=0.001638 Jy/beam ! Clean residual mean=-0.000003 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.237126 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.237126 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9283 mas, bmaj=1.675 mas, bpa=-8.113 degrees ! Estimated noise=0.319777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301454 Jy ! Component: 100 - total flux cleaned = -0.000299994 Jy ! Component: 150 - total flux cleaned = -0.000299558 Jy ! Component: 200 - total flux cleaned = -0.000327554 Jy ! Total flux subtracted in 200 components = -0.000327554 Jy ! Clean residual min=-0.002062 max=0.001861 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.236799 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.236799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106228Jy sigma=1.835363 ! Fit after self-cal, rms=0.106230Jy sigma=1.835332 wmodel J2210+2013_X_map.mod ! Writing 58 model components to file: J2210+2013_X_map.mod wobs J2210+2013_X_uvs.fits ! Writing UV FITS file: J2210+2013_X_uvs.fits wwins J2210+2013_X_map.win ! wwins: Wrote 3 windows to J2210+2013_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475008 Jy ! Component: 100 - total flux cleaned = -0.000508868 Jy ! Component: 150 - total flux cleaned = -0.000601926 Jy ! Component: 200 - total flux cleaned = -0.000720274 Jy ! Component: 250 - total flux cleaned = -0.000835545 Jy ! Component: 300 - total flux cleaned = -0.00103055 Jy ! Component: 350 - total flux cleaned = -0.00119302 Jy ! Component: 400 - total flux cleaned = -0.00127193 Jy ! Component: 450 - total flux cleaned = -0.0012976 Jy ! Component: 500 - total flux cleaned = -0.00129749 Jy ! Component: 550 - total flux cleaned = -0.00139767 Jy ! Component: 600 - total flux cleaned = -0.00147173 Jy ! Component: 650 - total flux cleaned = -0.00161789 Jy ! Component: 700 - total flux cleaned = -0.00166569 Jy ! Component: 750 - total flux cleaned = -0.00178402 Jy ! Component: 800 - total flux cleaned = -0.00185352 Jy ! Component: 850 - total flux cleaned = -0.00189953 Jy ! Component: 900 - total flux cleaned = -0.0019677 Jy ! Component: 950 - total flux cleaned = -0.00207971 Jy ! Component: 1000 - total flux cleaned = -0.00216791 Jy ! Component: 1050 - total flux cleaned = -0.00225527 Jy ! Component: 1100 - total flux cleaned = -0.00234142 Jy ! Component: 1150 - total flux cleaned = -0.00244744 Jy ! Component: 1200 - total flux cleaned = -0.00248923 Jy ! Component: 1250 - total flux cleaned = -0.00255162 Jy ! Component: 1300 - total flux cleaned = -0.00267518 Jy ! Component: 1350 - total flux cleaned = -0.00271613 Jy ! Component: 1400 - total flux cleaned = -0.00277634 Jy ! Component: 1450 - total flux cleaned = -0.00291547 Jy ! Component: 1500 - total flux cleaned = -0.00289559 Jy ! Component: 1550 - total flux cleaned = -0.00301267 Jy ! Component: 1600 - total flux cleaned = -0.00303196 Jy ! Component: 1650 - total flux cleaned = -0.00310896 Jy ! Component: 1700 - total flux cleaned = -0.00320416 Jy ! Component: 1750 - total flux cleaned = -0.00329855 Jy ! Component: 1800 - total flux cleaned = -0.00337327 Jy ! Component: 1850 - total flux cleaned = -0.00344746 Jy ! Component: 1900 - total flux cleaned = -0.00352088 Jy ! Component: 1950 - total flux cleaned = -0.00352081 Jy ! Component: 2000 - total flux cleaned = -0.00359304 Jy ! Component: 2050 - total flux cleaned = -0.00364701 Jy ! Component: 2100 - total flux cleaned = -0.00362927 Jy ! Component: 2150 - total flux cleaned = -0.00375274 Jy ! Component: 2200 - total flux cleaned = -0.00375274 Jy ! Component: 2250 - total flux cleaned = -0.00380502 Jy ! Component: 2300 - total flux cleaned = -0.00382229 Jy ! Component: 2350 - total flux cleaned = -0.00387388 Jy ! Component: 2400 - total flux cleaned = -0.00387389 Jy ! Component: 2450 - total flux cleaned = -0.00385721 Jy ! Component: 2500 - total flux cleaned = -0.00390768 Jy ! Component: 2550 - total flux cleaned = -0.00395782 Jy ! Component: 2600 - total flux cleaned = -0.00399085 Jy ! Component: 2650 - total flux cleaned = -0.00402371 Jy ! Component: 2700 - total flux cleaned = -0.00405636 Jy ! Component: 2750 - total flux cleaned = -0.0040888 Jy ! Component: 2800 - total flux cleaned = -0.00412123 Jy ! Component: 2850 - total flux cleaned = -0.00418517 Jy ! Component: 2900 - total flux cleaned = -0.00426461 Jy ! Component: 2950 - total flux cleaned = -0.00424869 Jy ! Component: 3000 - total flux cleaned = -0.00431169 Jy ! Component: 3050 - total flux cleaned = -0.00438979 Jy ! Component: 3100 - total flux cleaned = -0.00442071 Jy ! Component: 3150 - total flux cleaned = -0.0044363 Jy ! Component: 3200 - total flux cleaned = -0.0045284 Jy ! Component: 3250 - total flux cleaned = -0.00455897 Jy ! Component: 3300 - total flux cleaned = -0.00463478 Jy ! Component: 3350 - total flux cleaned = -0.00471023 Jy ! Component: 3400 - total flux cleaned = -0.0047252 Jy ! Component: 3450 - total flux cleaned = -0.00484441 Jy ! Component: 3500 - total flux cleaned = -0.00485916 Jy ! Component: 3550 - total flux cleaned = -0.00494767 Jy ! Component: 3600 - total flux cleaned = -0.00497704 Jy ! Component: 3650 - total flux cleaned = -0.00502081 Jy ! Component: 3700 - total flux cleaned = -0.00506434 Jy ! Component: 3750 - total flux cleaned = -0.00509328 Jy ! Component: 3800 - total flux cleaned = -0.00517961 Jy ! Component: 3850 - total flux cleaned = -0.00529416 Jy ! Component: 3900 - total flux cleaned = -0.00529425 Jy ! Component: 3950 - total flux cleaned = -0.00535116 Jy ! Component: 4000 - total flux cleaned = -0.00542178 Jy ! Component: 4050 - total flux cleaned = -0.00546401 Jy ! Total flux subtracted in 4096 components = -0.00549205 Jy ! Clean residual min=-0.000956 max=0.000867 Jy/beam ! Clean residual mean=0.000004 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.231307 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 321 components and 0.231307 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2210+2013_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9283 x 1.675 at -8.113 degrees (North through East) ! Clean map min=-0.0021588 max=0.22519 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2210+2013_X_map.fits wmodel /scr/pima/rv102_uvs/J2210+2013_X_map.mod ! Writing 321 model components to file: /scr/pima/rv102_uvs/J2210+2013_X_map.mod wobs /scr/pima/rv102_uvs/J2210+2013_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2210+2013_X_uvs.fits wwins /scr/pima/rv102_uvs/J2210+2013_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J2210+2013_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.225186 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.300558 0.300558 0.601117 1.20223 2.40447 4.80893 9.61787 19.2357 38.4715 76.9429 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.225 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 998.142 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2210+2013_X_dfm.log closed on Sat Nov 9 10:22:37 2019