! Started logfile: /scr/pima/rv102_uvs/J2210+2013_S_dfm.log on Sat Nov 9 09:36:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J2210+2013_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2210+2013_S_uva.fits ! AN table 1: 22 integrations on 21 of 21 possible baselines. ! AN table 2: 22 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2210+2013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3696 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2210+2013_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009400Jy sigma=14.655024 ! Fit after self-cal, rms=0.916116Jy sigma=13.324669 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=5.679 mas, bpa=-0.7889 degrees ! Estimated noise=1.86811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646197 Jy ! Component: 100 - total flux cleaned = 0.0796515 Jy ! Total flux subtracted in 100 components = 0.0796515 Jy ! Clean residual min=-0.006263 max=0.007751 Jy/beam ! Clean residual mean=-0.000021 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.0796515 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0796515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072187Jy sigma=0.877210 ! Fit after self-cal, rms=0.072059Jy sigma=0.876202 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=6.988 mas, bpa=-1.86 degrees ! Estimated noise=0.869682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914911 Jy ! Component: 100 - total flux cleaned = 0.0133741 Jy ! Component: 150 - total flux cleaned = 0.0153367 Jy ! Component: 200 - total flux cleaned = 0.0157751 Jy ! Total flux subtracted in 200 components = 0.0157751 Jy ! Clean residual min=-0.003787 max=0.005404 Jy/beam ! Clean residual mean=-0.000022 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0954266 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.0954266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071132Jy sigma=0.855964 ! Fit after self-cal, rms=0.071151Jy sigma=0.855738 ! Inverting map ! Added new window around map position (-13, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410064 Jy ! Component: 100 - total flux cleaned = 0.00471537 Jy ! Component: 150 - total flux cleaned = 0.00501631 Jy ! Component: 200 - total flux cleaned = 0.00506452 Jy ! Total flux subtracted in 200 components = 0.00506452 Jy ! Clean residual min=-0.003052 max=0.003347 Jy/beam ! Clean residual mean=-0.000015 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.100491 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.100491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070893Jy sigma=0.850992 ! Fit after self-cal, rms=0.070785Jy sigma=0.850220 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 6.988 at -1.86 degrees (North through East) ! Clean map min=-0.0031148 max=0.087193 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.00 KP 0.95 LA 1.05 ! MK 1.57 PT 0.98 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.98 KP 0.95 LA 1.01 ! MK 1.09 NL 0.99 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.00 KP 1.01 LA 1.00 ! MK 1.00 PT 1.01 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.90 KP 1.02 LA 1.02 ! MK 0.88 NL 1.00 PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 0.94 KP 1.02 LA 1.05 ! MK 1.14 PT 0.98 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 0.87 KP 1.00 LA 0.95 ! MK 0.91 NL 1.01 PT 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.05 KP 0.97 LA 1.07 ! MK 0.77 PT 0.98 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 0.98 KP 1.04 LA 1.08 ! MK 1.09 NL 0.88 PT 1.05 ! ! ! Fit before self-cal, rms=0.070785Jy sigma=0.850220 ! Fit after self-cal, rms=0.072508Jy sigma=0.842930 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=6.882 mas, bpa=-1.995 degrees ! Estimated noise=0.858588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204551 Jy ! Component: 100 - total flux cleaned = 0.0022876 Jy ! Component: 150 - total flux cleaned = 0.00248428 Jy ! Component: 200 - total flux cleaned = 0.00262108 Jy ! Total flux subtracted in 200 components = 0.00262108 Jy ! Clean residual min=-0.002730 max=0.002535 Jy/beam ! Clean residual mean=-0.000021 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.103112 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.103112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072412Jy sigma=0.841840 ! Fit after self-cal, rms=0.072508Jy sigma=0.841433 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072508Jy sigma=0.841433 ! Fit after self-cal, rms=0.072380Jy sigma=0.841278 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=6.857 mas, bpa=-2.106 degrees ! Estimated noise=0.857141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131415 Jy ! Component: 100 - total flux cleaned = 0.00152831 Jy ! Component: 150 - total flux cleaned = 0.00162004 Jy ! Component: 200 - total flux cleaned = 0.00167426 Jy ! Total flux subtracted in 200 components = 0.00167426 Jy ! Clean residual min=-0.002725 max=0.002465 Jy/beam ! Clean residual mean=-0.000022 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.104787 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.104787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072328Jy sigma=0.840837 ! Fit after self-cal, rms=0.072339Jy sigma=0.840757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610238 Jy ! Component: 100 - total flux cleaned = 0.000663547 Jy ! Component: 150 - total flux cleaned = 0.000662741 Jy ! Component: 200 - total flux cleaned = 0.000640418 Jy ! Total flux subtracted in 200 components = 0.000640418 Jy ! Clean residual min=-0.002697 max=0.002487 Jy/beam ! Clean residual mean=-0.000021 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.105427 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.105427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072311Jy sigma=0.840561 ! Fit after self-cal, rms=0.072318Jy sigma=0.840531 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072318Jy sigma=0.840531 ! Fit after self-cal, rms=0.072071Jy sigma=0.840447 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=6.836 mas, bpa=-2.283 degrees ! Estimated noise=0.856076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713427 Jy ! Component: 100 - total flux cleaned = 0.000882744 Jy ! Component: 150 - total flux cleaned = 0.000967068 Jy ! Component: 200 - total flux cleaned = 0.000986242 Jy ! Total flux subtracted in 200 components = 0.000986242 Jy ! Clean residual min=-0.002704 max=0.002496 Jy/beam ! Clean residual mean=-0.000022 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.106413 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.106413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072044Jy sigma=0.840285 ! Fit after self-cal, rms=0.072047Jy sigma=0.840253 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379081 Jy ! Component: 100 - total flux cleaned = 0.000398252 Jy ! Component: 150 - total flux cleaned = 0.000398625 Jy ! Component: 200 - total flux cleaned = 0.000382644 Jy ! Total flux subtracted in 200 components = 0.000382644 Jy ! Clean residual min=-0.002685 max=0.002492 Jy/beam ! Clean residual mean=-0.000021 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.106796 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.106796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072033Jy sigma=0.840156 ! Fit after self-cal, rms=0.072037Jy sigma=0.840142 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072037Jy sigma=0.840142 ! Fit after self-cal, rms=0.071890Jy sigma=0.840103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.192 mas, bmaj=10.42 mas, bpa=-30.31 degrees ! Estimated noise=1.05193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326527 Jy ! Component: 100 - total flux cleaned = 0.000424495 Jy ! Component: 150 - total flux cleaned = 0.000521505 Jy ! Component: 200 - total flux cleaned = 0.000575569 Jy ! Total flux subtracted in 200 components = 0.000575569 Jy ! Clean residual min=-0.002878 max=0.002391 Jy/beam ! Clean residual mean=-0.000041 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.107371 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.107371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071883Jy sigma=0.840048 ! Fit after self-cal, rms=0.071887Jy sigma=0.840035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207848 Jy ! Component: 100 - total flux cleaned = 0.000262313 Jy ! Component: 150 - total flux cleaned = 0.000299778 Jy ! Component: 200 - total flux cleaned = 0.000325566 Jy ! Total flux subtracted in 200 components = 0.000325566 Jy ! Clean residual min=-0.002857 max=0.002356 Jy/beam ! Clean residual mean=-0.000040 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.107697 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.107697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071882Jy sigma=0.840017 ! Fit after self-cal, rms=0.071884Jy sigma=0.840009 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=6.828 mas, bpa=-2.458 degrees ! Estimated noise=0.85471 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 6.828 at -2.458 degrees (North through East) ! Clean map min=-0.0025726 max=0.085338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=5.54 mas, bpa=-1.253 degrees ! Estimated noise=1.8377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063471 Jy ! Component: 100 - total flux cleaned = 0.0784357 Jy ! Component: 150 - total flux cleaned = 0.0860322 Jy ! Component: 200 - total flux cleaned = 0.0909496 Jy ! Total flux subtracted in 200 components = 0.0909496 Jy ! Clean residual min=-0.005592 max=0.005045 Jy/beam ! Clean residual mean=-0.000019 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.0909496 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0909496 Jy ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=6.828 mas, bpa=-2.458 degrees ! Estimated noise=0.85471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645326 Jy ! Component: 100 - total flux cleaned = 0.0101183 Jy ! Component: 150 - total flux cleaned = 0.0125427 Jy ! Component: 200 - total flux cleaned = 0.0142576 Jy ! Total flux subtracted in 200 components = 0.0142576 Jy ! Clean residual min=-0.003094 max=0.002570 Jy/beam ! Clean residual mean=-0.000025 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.105207 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.105207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.192 mas, bmaj=10.42 mas, bpa=-30.31 degrees ! Estimated noise=1.05193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126842 Jy ! Component: 100 - total flux cleaned = 0.00153814 Jy ! Component: 150 - total flux cleaned = 0.00178504 Jy ! Component: 200 - total flux cleaned = 0.00192053 Jy ! Total flux subtracted in 200 components = 0.00192053 Jy ! Clean residual min=-0.002998 max=0.002409 Jy/beam ! Clean residual mean=-0.000043 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.107128 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.70837e-05 Jy ! Component: 100 - total flux cleaned = 4.92652e-05 Jy ! Component: 150 - total flux cleaned = 6.42718e-05 Jy ! Component: 200 - total flux cleaned = 9.31367e-05 Jy ! Total flux subtracted in 200 components = 9.31367e-05 Jy ! Clean residual min=-0.002969 max=0.002405 Jy/beam ! Clean residual mean=-0.000042 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.107221 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.107221 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=6.828 mas, bpa=-2.458 degrees ! Estimated noise=0.85471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228641 Jy ! Component: 100 - total flux cleaned = -0.000229307 Jy ! Component: 150 - total flux cleaned = -0.000195696 Jy ! Component: 200 - total flux cleaned = -0.000165494 Jy ! Total flux subtracted in 200 components = -0.000165494 Jy ! Clean residual min=-0.002827 max=0.002421 Jy/beam ! Clean residual mean=-0.000022 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.107055 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.107055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071919Jy sigma=0.840699 ! Fit after self-cal, rms=0.071925Jy sigma=0.840591 wmodel J2210+2013_S_map.mod ! Writing 80 model components to file: J2210+2013_S_map.mod wobs J2210+2013_S_uvs.fits ! Writing UV FITS file: J2210+2013_S_uvs.fits wwins J2210+2013_S_map.win ! wwins: Wrote 3 windows to J2210+2013_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109625 Jy ! Component: 100 - total flux cleaned = -0.00135935 Jy ! Component: 150 - total flux cleaned = -0.00147665 Jy ! Component: 200 - total flux cleaned = -0.00155083 Jy ! Component: 250 - total flux cleaned = -0.00165532 Jy ! Component: 300 - total flux cleaned = -0.00168858 Jy ! Component: 350 - total flux cleaned = -0.00168877 Jy ! Component: 400 - total flux cleaned = -0.00162714 Jy ! Component: 450 - total flux cleaned = -0.0015359 Jy ! Component: 500 - total flux cleaned = -0.00144728 Jy ! Component: 550 - total flux cleaned = -0.0014474 Jy ! Component: 600 - total flux cleaned = -0.00136354 Jy ! Component: 650 - total flux cleaned = -0.00128201 Jy ! Component: 700 - total flux cleaned = -0.00130892 Jy ! Component: 750 - total flux cleaned = -0.0013089 Jy ! Component: 800 - total flux cleaned = -0.00128291 Jy ! Component: 850 - total flux cleaned = -0.00128281 Jy ! Component: 900 - total flux cleaned = -0.00125754 Jy ! Component: 950 - total flux cleaned = -0.00128205 Jy ! Component: 1000 - total flux cleaned = -0.00135461 Jy ! Component: 1050 - total flux cleaned = -0.00147358 Jy ! Component: 1100 - total flux cleaned = -0.00144972 Jy ! Component: 1150 - total flux cleaned = -0.00161197 Jy ! Component: 1200 - total flux cleaned = -0.00170313 Jy ! Component: 1250 - total flux cleaned = -0.00168066 Jy ! Component: 1300 - total flux cleaned = -0.00183651 Jy ! Component: 1350 - total flux cleaned = -0.00188072 Jy ! Component: 1400 - total flux cleaned = -0.00196769 Jy ! Component: 1450 - total flux cleaned = -0.00207536 Jy ! Component: 1500 - total flux cleaned = -0.00213909 Jy ! Component: 1550 - total flux cleaned = -0.00216016 Jy ! Component: 1600 - total flux cleaned = -0.00222264 Jy ! Component: 1650 - total flux cleaned = -0.00228438 Jy ! Component: 1700 - total flux cleaned = -0.00232526 Jy ! Component: 1750 - total flux cleaned = -0.00232518 Jy ! Component: 1800 - total flux cleaned = -0.00238514 Jy ! Component: 1850 - total flux cleaned = -0.00234522 Jy ! Component: 1900 - total flux cleaned = -0.00236488 Jy ! Component: 1950 - total flux cleaned = -0.00230619 Jy ! Component: 2000 - total flux cleaned = -0.00236408 Jy ! Component: 2050 - total flux cleaned = -0.00238324 Jy ! Component: 2100 - total flux cleaned = -0.00236407 Jy ! Component: 2150 - total flux cleaned = -0.00232646 Jy ! Component: 2200 - total flux cleaned = -0.00234517 Jy ! Component: 2250 - total flux cleaned = -0.00238238 Jy ! Component: 2300 - total flux cleaned = -0.00232702 Jy ! Component: 2350 - total flux cleaned = -0.00236341 Jy ! Component: 2400 - total flux cleaned = -0.00232711 Jy ! Component: 2450 - total flux cleaned = -0.0022732 Jy ! Component: 2500 - total flux cleaned = -0.00229129 Jy ! Component: 2550 - total flux cleaned = -0.00236225 Jy ! Component: 2600 - total flux cleaned = -0.00234448 Jy ! Component: 2650 - total flux cleaned = -0.00234447 Jy ! Component: 2700 - total flux cleaned = -0.00237918 Jy ! Component: 2750 - total flux cleaned = -0.00237914 Jy ! Component: 2800 - total flux cleaned = -0.00237894 Jy ! Component: 2850 - total flux cleaned = -0.00232766 Jy ! Component: 2900 - total flux cleaned = -0.00234457 Jy ! Component: 2950 - total flux cleaned = -0.00239505 Jy ! Component: 3000 - total flux cleaned = -0.00237818 Jy ! Component: 3050 - total flux cleaned = -0.00241156 Jy ! Component: 3100 - total flux cleaned = -0.00236191 Jy ! Component: 3150 - total flux cleaned = -0.00242789 Jy ! Component: 3200 - total flux cleaned = -0.00244431 Jy ! Component: 3250 - total flux cleaned = -0.00246062 Jy ! Component: 3300 - total flux cleaned = -0.00249305 Jy ! Component: 3350 - total flux cleaned = -0.00249303 Jy ! Component: 3400 - total flux cleaned = -0.00250918 Jy ! Component: 3450 - total flux cleaned = -0.0025729 Jy ! Component: 3500 - total flux cleaned = -0.00257279 Jy ! Component: 3550 - total flux cleaned = -0.00260421 Jy ! Component: 3600 - total flux cleaned = -0.00260432 Jy ! Component: 3650 - total flux cleaned = -0.00261981 Jy ! Component: 3700 - total flux cleaned = -0.00266649 Jy ! Component: 3750 - total flux cleaned = -0.00265105 Jy ! Component: 3800 - total flux cleaned = -0.0026972 Jy ! Component: 3850 - total flux cleaned = -0.00269719 Jy ! Component: 3900 - total flux cleaned = -0.00275825 Jy ! Component: 3950 - total flux cleaned = -0.00277333 Jy ! Component: 4000 - total flux cleaned = -0.0028339 Jy ! Component: 4050 - total flux cleaned = -0.00286406 Jy ! Total flux subtracted in 4096 components = -0.00292408 Jy ! Clean residual min=-0.000895 max=0.000874 Jy/beam ! Clean residual mean=-0.000012 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.104131 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 328 components and 0.104131 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2210+2013_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 6.828 at -2.458 degrees (North through East) ! Clean map min=-0.0015279 max=0.083295 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2210+2013_S_map.fits wmodel /scr/pima/rv102_uvs/J2210+2013_S_map.mod ! Writing 328 model components to file: /scr/pima/rv102_uvs/J2210+2013_S_map.mod wobs /scr/pima/rv102_uvs/J2210+2013_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2210+2013_S_uvs.fits wwins /scr/pima/rv102_uvs/J2210+2013_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J2210+2013_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0832949 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951918 0.951918 1.90384 3.80767 7.61535 15.2307 30.4614 60.9228 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.083 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 315.153 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2210+2013_S_dfm.log closed on Sat Nov 9 09:36:45 2019