! Started logfile: /scr/pima/rv102_uvs/J2138-1810_S_dfm.log on Sat Nov  9 09:36:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rv102_uvs/J2138-1810_S_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J2138-1810_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2138-1810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 3480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2138-1810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.099010Jy  sigma=14.586595
! Fit after  self-cal, rms=0.796489Jy  sigma=10.782146
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.516 mas, bmaj=33.07 mas, bpa=-12.7 degrees
! Estimated noise=1.75751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15133 Jy
! Component: 100  -  total flux cleaned = 0.246456 Jy
! Total flux subtracted in 100 components = 0.246456 Jy
! Clean residual min=-0.042198 max=0.054923 Jy/beam
! Clean residual mean=-0.000681 rms=0.018736 Jy/beam
! Combined flux in latest and established models = 0.246456 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.246456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.270415Jy  sigma=3.425499
! Fit after  self-cal, rms=0.269493Jy  sigma=3.412941
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.585 mas, bmaj=33.91 mas, bpa=-12.65 degrees
! Estimated noise=0.963559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135798 Jy
! Component: 100  -  total flux cleaned = 0.233093 Jy
! Component: 150  -  total flux cleaned = 0.300543 Jy
! Component: 200  -  total flux cleaned = 0.347854 Jy
! Total flux subtracted in 200 components = 0.347854 Jy
! Clean residual min=-0.037319 max=0.037373 Jy/beam
! Clean residual mean=-0.000373 rms=0.018972 Jy/beam
! Combined flux in latest and established models = 0.59431 Jy
! Performing phase self-cal
! Adding 152 model components to the UV plane model.
! The established model now contains 208 components and 0.59431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143525Jy  sigma=1.832321
! Fit after  self-cal, rms=0.142009Jy  sigma=1.823057
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.585 x 33.91 at -12.65 degrees (North through East)
! Clean map  min=-0.04701  max=0.20874 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     HN        1.26     KP        0.98     LA        1.02     
!   NL        1.07     PT        0.68     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.16     KP        0.99     LA        1.01     
!   NL        1.18     PT        0.70     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        1.02     KP        1.04     LA        1.02     
!   NL        1.27     PT        0.70     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     HN        1.02     KP        1.01     LA        1.03     
!   NL        1.25     PT        0.67     
! 
! 
! Fit before self-cal, rms=0.142009Jy  sigma=1.823057
! Fit after  self-cal, rms=0.095468Jy  sigma=1.229274
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.753 mas, bmaj=35.35 mas, bpa=-12.5 degrees
! Estimated noise=0.917019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234918 Jy
! Component: 100  -  total flux cleaned = 0.0328423 Jy
! Component: 150  -  total flux cleaned = 0.0371986 Jy
! Component: 200  -  total flux cleaned = 0.0371866 Jy
! Total flux subtracted in 200 components = 0.0371866 Jy
! Clean residual min=-0.009208 max=0.009187 Jy/beam
! Clean residual mean=0.000002 rms=0.003972 Jy/beam
! Combined flux in latest and established models = 0.631496 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 315 components and 0.631497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079169Jy  sigma=0.971155
! Fit after  self-cal, rms=0.078770Jy  sigma=0.961550
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078770Jy  sigma=0.961550
! Fit after  self-cal, rms=0.076592Jy  sigma=0.869301
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.83 mas, bmaj=35.31 mas, bpa=-12.7 degrees
! Estimated noise=0.907802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00900599 Jy
! Component: 100  -  total flux cleaned = 0.0120784 Jy
! Component: 150  -  total flux cleaned = 0.0153603 Jy
! Component: 200  -  total flux cleaned = 0.0176916 Jy
! Total flux subtracted in 200 components = 0.0176916 Jy
! Clean residual min=-0.004590 max=0.004581 Jy/beam
! Clean residual mean=-0.000030 rms=0.001951 Jy/beam
! Combined flux in latest and established models = 0.649188 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 400 components and 0.649188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072510Jy  sigma=0.823958
! Fit after  self-cal, rms=0.072234Jy  sigma=0.822036
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173235 Jy
! Component: 100  -  total flux cleaned = 0.00270064 Jy
! Component: 150  -  total flux cleaned = 0.00270179 Jy
! Component: 200  -  total flux cleaned = 0.00312663 Jy
! Total flux subtracted in 200 components = 0.00312663 Jy
! Clean residual min=-0.003158 max=0.003180 Jy/beam
! Clean residual mean=-0.000015 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.652315 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 486 components and 0.652315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070465Jy  sigma=0.804824
! Fit after  self-cal, rms=0.070387Jy  sigma=0.804421
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070387Jy  sigma=0.804421
! Fit after  self-cal, rms=0.070496Jy  sigma=0.802878
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.847 mas, bmaj=35.37 mas, bpa=-12.75 degrees
! Estimated noise=0.906004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303113 Jy
! Component: 100  -  total flux cleaned = 0.00373454 Jy
! Component: 150  -  total flux cleaned = 0.00469385 Jy
! Component: 200  -  total flux cleaned = 0.00543282 Jy
! Total flux subtracted in 200 components = 0.00543282 Jy
! Clean residual min=-0.002372 max=0.002370 Jy/beam
! Clean residual mean=-0.000005 rms=0.001091 Jy/beam
! Combined flux in latest and established models = 0.657748 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 547 components and 0.657748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069532Jy  sigma=0.793544
! Fit after  self-cal, rms=0.069504Jy  sigma=0.793314
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428471 Jy
! Component: 100  -  total flux cleaned = -3.08918e-05 Jy
! Component: 150  -  total flux cleaned = 0.000349009 Jy
! Component: 200  -  total flux cleaned = 0.000697242 Jy
! Total flux subtracted in 200 components = 0.000697242 Jy
! Clean residual min=-0.001866 max=0.001864 Jy/beam
! Clean residual mean=-0.000003 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.658445 Jy
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 622 components and 0.658445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068939Jy  sigma=0.788128
! Fit after  self-cal, rms=0.068925Jy  sigma=0.788003
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068925Jy  sigma=0.788003
! Fit after  self-cal, rms=0.069070Jy  sigma=0.787499
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.441 mas, bmaj=36.07 mas, bpa=-12.68 degrees
! Estimated noise=0.972729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102698 Jy
! Component: 100  -  total flux cleaned = 0.00152729 Jy
! Component: 150  -  total flux cleaned = 0.00220635 Jy
! Component: 200  -  total flux cleaned = 0.00262078 Jy
! Total flux subtracted in 200 components = 0.00262078 Jy
! Clean residual min=-0.001698 max=0.001688 Jy/beam
! Clean residual mean=-0.000005 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.661066 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 691 components and 0.661066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068640Jy  sigma=0.783984
! Fit after  self-cal, rms=0.068632Jy  sigma=0.783833
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327695 Jy
! Component: 100  -  total flux cleaned = 0.00108673 Jy
! Component: 150  -  total flux cleaned = 0.00162016 Jy
! Component: 200  -  total flux cleaned = 0.00212465 Jy
! Total flux subtracted in 200 components = 0.00212465 Jy
! Clean residual min=-0.001369 max=0.001377 Jy/beam
! Clean residual mean=-0.000004 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.663191 Jy
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 761 components and 0.663191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068351Jy  sigma=0.781740
! Fit after  self-cal, rms=0.068342Jy  sigma=0.781669
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.855 mas, bmaj=35.41 mas, bpa=-12.76 degrees
! Estimated noise=0.90668 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.855 x 35.41 at -12.76 degrees (North through East)
! Clean map  min=-0.0098062  max=0.1794 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.726 mas, bmaj=33.94 mas, bpa=-12.64 degrees
! Estimated noise=1.74384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147289 Jy
! Component: 100  -  total flux cleaned = 0.237194 Jy
! Component: 150  -  total flux cleaned = 0.303605 Jy
! Component: 200  -  total flux cleaned = 0.353807 Jy
! Total flux subtracted in 200 components = 0.353807 Jy
! Clean residual min=-0.030468 max=0.031354 Jy/beam
! Clean residual mean=-0.000403 rms=0.011414 Jy/beam
! Combined flux in latest and established models = 0.353807 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 102 model components to the UV plane model.
! The established model now contains 102 components and 0.353807 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.855 mas, bmaj=35.41 mas, bpa=-12.76 degrees
! Estimated noise=0.90668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0633898 Jy
! Component: 100  -  total flux cleaned = 0.101925 Jy
! Component: 150  -  total flux cleaned = 0.129915 Jy
! Component: 200  -  total flux cleaned = 0.143086 Jy
! Total flux subtracted in 200 components = 0.143086 Jy
! Clean residual min=-0.019297 max=0.019393 Jy/beam
! Clean residual mean=-0.000226 rms=0.009200 Jy/beam
! Combined flux in latest and established models = 0.496893 Jy
! Adding 140 model components to the UV plane model.
! The established model now contains 239 components and 0.496893 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.441 mas, bmaj=36.07 mas, bpa=-12.68 degrees
! Estimated noise=0.972729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179369 Jy
! Component: 100  -  total flux cleaned = 0.0275209 Jy
! Component: 150  -  total flux cleaned = 0.0267605 Jy
! Component: 200  -  total flux cleaned = 0.0290065 Jy
! Total flux subtracted in 200 components = 0.0290065 Jy
! Clean residual min=-0.010390 max=0.010416 Jy/beam
! Clean residual mean=-0.000135 rms=0.005259 Jy/beam
! Combined flux in latest and established models = 0.525899 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000438296 Jy
! Component: 100  -  total flux cleaned = -0.00186128 Jy
! Component: 150  -  total flux cleaned = -0.0026681 Jy
! Component: 200  -  total flux cleaned = -0.00301144 Jy
! Total flux subtracted in 200 components = -0.00301144 Jy
! Clean residual min=-0.005743 max=0.005767 Jy/beam
! Clean residual mean=-0.000083 rms=0.002875 Jy/beam
! Combined flux in latest and established models = 0.522888 Jy
! Adding 222 model components to the UV plane model.
! The established model now contains 453 components and 0.522887 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.855 mas, bmaj=35.41 mas, bpa=-12.76 degrees
! Estimated noise=0.90668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000745352 Jy
! Component: 100  -  total flux cleaned = 0.0020535 Jy
! Component: 150  -  total flux cleaned = 0.00201897 Jy
! Component: 200  -  total flux cleaned = 0.00136363 Jy
! Total flux subtracted in 200 components = 0.00136363 Jy
! Clean residual min=-0.003478 max=0.003480 Jy/beam
! Clean residual mean=-0.000048 rms=0.001644 Jy/beam
! Combined flux in latest and established models = 0.524251 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 528 components and 0.524251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070507Jy  sigma=0.809233
! Fit after  self-cal, rms=0.070289Jy  sigma=0.807531
wmodel J2138-1810_S_map.mod
! Writing 528 model components to file: J2138-1810_S_map.mod
wobs   J2138-1810_S_uvs.fits
! Writing UV FITS file: J2138-1810_S_uvs.fits
wwins  J2138-1810_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /scr/pima/rv102_uvs/J2138-1810_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.855 x 35.41 at -12.76 degrees (North through East)
! Clean map  min=-0.016296  max=0.17437 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2138-1810_S_map.fits
wmodel /scr/pima/rv102_uvs/J2138-1810_S_map.mod
! Writing 528 model components to file: /scr/pima/rv102_uvs/J2138-1810_S_map.mod
wobs   /scr/pima/rv102_uvs/J2138-1810_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J2138-1810_S_uvs.fits
wwins  /scr/pima/rv102_uvs/J2138-1810_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174375 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00161156 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.77259 2.77259 5.54518 11.0904 22.1807 44.3615 88.7229
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0048 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  108.202 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J2138-1810_S_dfm.log closed on Sat Nov  9 09:36:30 2019