! Started logfile: /scr/pima/rv102_uvs/J2130-0927_S_dfm.log on Sat Nov  9 09:36:23 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rv102_uvs/J2130-0927_S_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J2130-0927_S_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! AN table 2: 9 integrations on 6 of 6 possible baselines.
! AN table 3: 3 integrations on 10 of 10 possible baselines.
! AN table 4: 9 integrations on 10 of 10 possible baselines.
! AN table 5: 6 integrations on 1 of 1 possible baselines.
! AN table 6: 2 integrations on 15 of 15 possible baselines.
! AN table 7: 2 integrations on 10 of 10 possible baselines.
! AN table 8: 3 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.715215 visibilities/baseline/integration-bin.
! Found source: J2130-0927
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 4400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2130-0927_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 25 telescope corrections were flagged in sub-array 4.
!  A total of 12 telescope corrections were flagged in sub-array 5.
!  A total of 6 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 25 telescope corrections were flagged in sub-array 4.
!  A total of 12 telescope corrections were flagged in sub-array 5.
!  A total of 6 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 25 telescope corrections were flagged in sub-array 4.
!  A total of 12 telescope corrections were flagged in sub-array 5.
!  A total of 6 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 4.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 25 telescope corrections were flagged in sub-array 4.
!  A total of 12 telescope corrections were flagged in sub-array 5.
!  A total of 6 telescope corrections were flagged in sub-array 8.
! 
! Fit before self-cal, rms=1.063621Jy  sigma=8.082171
! Fit after  self-cal, rms=0.678733Jy  sigma=4.835467
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.314 mas, bmaj=11.04 mas, bpa=-11.97 degrees
! Estimated noise=2.46632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275187 Jy
! Component: 100  -  total flux cleaned = 0.338571 Jy
! Total flux subtracted in 100 components = 0.338571 Jy
! Clean residual min=-0.014577 max=0.024195 Jy/beam
! Clean residual mean=0.000249 rms=0.004316 Jy/beam
! Combined flux in latest and established models = 0.338571 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.338571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182698Jy  sigma=0.801866
! Fit after  self-cal, rms=0.182662Jy  sigma=0.801711
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=11.31 mas, bpa=-9.545 degrees
! Estimated noise=1.91725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311367 Jy
! Component: 100  -  total flux cleaned = 0.044916 Jy
! Component: 150  -  total flux cleaned = 0.0518594 Jy
! Component: 200  -  total flux cleaned = 0.0559011 Jy
! Total flux subtracted in 200 components = 0.0559011 Jy
! Clean residual min=-0.006631 max=0.008721 Jy/beam
! Clean residual mean=0.000978 rms=0.001995 Jy/beam
! Combined flux in latest and established models = 0.394472 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.394472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177556Jy  sigma=0.734361
! Fit after  self-cal, rms=0.177636Jy  sigma=0.733424
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.486 x 11.31 at -9.545 degrees (North through East)
! Clean map  min=-0.0063616  max=0.35508 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.02     KP        0.96     LA        1.00     
!   MA        1.32     ON        1.01     PT        1.04     SC        0.98     
!   WF        0.99     WZ        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.95     NL        1.12     SC        0.89     WF        0.90     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HN        1.01     KP        0.93     LA        0.90     MK        1.00     
!   PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.99     LA        0.93     MK        1.19     PT        1.00     
!   WF        0.92     
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.02     KP        0.99     LA        1.05     MK        1.10     
!   NL        0.88     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.16     KP        1.03     LA        0.94     MK        1.09     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 8:
!   KP        0.00*    MK        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.03     KP        1.01     LA        1.02     
!   MA        1.00*    ON        1.01     PT        1.03     SC        0.98     
!   WF        0.99     WZ        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.88     NL        1.23     SC        1.07     WF        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.97     KP        0.95     LA        1.03     MK        1.14     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.96     LA        0.91     MK        1.08     PT        0.99     
!   WF        0.95     
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        0.95     KP        0.97     LA        1.05     MK        0.95     
!   NL        1.03     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.14     KP        1.02     LA        0.96     MK        1.00     
!   PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 8:
!   KP        0.00*    MK        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.05     KP        1.01     LA        1.01     
!   MA        0.72     ON        0.98     PT        1.01     SC        0.98     
!   WF        0.95     WZ        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.05     NL        1.10     SC        0.96     WF        0.91     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HN        1.05     KP        0.93     LA        1.05     MK        0.98     
!   PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.94     LA        0.96     MK        1.02     PT        1.03     
!   WF        0.97     
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.04     KP        1.01     LA        0.99     MK        0.95     
!   NL        0.94     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.50     KP        0.96     LA        1.03     MK        0.98     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 8:
!   KP        0.00*    MK        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.03     KP        1.00     LA        1.01     
!   MA        1.00*    ON        0.91     PT        1.02     SC        1.02     
!   WF        0.98     WZ        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.96     NL        1.12     SC        1.12     WF        0.89     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HN        1.06     KP        0.92     LA        1.01     MK        0.75     
!   PT        1.09     
! 
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.89     LA        1.04     MK        0.84     PT        0.97     
!   WF        1.08     
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.07     KP        0.94     LA        0.97     MK        0.75     
!   NL        0.87     PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.98     KP        0.94     LA        1.06     MK        0.64     
!   PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 8:
!   KP        0.00*    MK        0.00*    
! 
! 
! Fit before self-cal, rms=0.177636Jy  sigma=0.733424
! Fit after  self-cal, rms=0.175598Jy  sigma=0.676472
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.472 mas, bmaj=11.32 mas, bpa=-9.579 degrees
! Estimated noise=1.89478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196311 Jy
! Component: 100  -  total flux cleaned = 0.00215207 Jy
! Component: 150  -  total flux cleaned = 0.00223418 Jy
! Component: 200  -  total flux cleaned = 0.00216931 Jy
! Total flux subtracted in 200 components = 0.00216931 Jy
! Clean residual min=-0.005184 max=0.005218 Jy/beam
! Clean residual mean=0.000270 rms=0.001286 Jy/beam
! Combined flux in latest and established models = 0.396642 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.396641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175323Jy  sigma=0.675859
! Fit after  self-cal, rms=0.175401Jy  sigma=0.675388
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175401Jy  sigma=0.675388
! Fit after  self-cal, rms=0.174049Jy  sigma=0.669494
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.464 mas, bmaj=11.33 mas, bpa=-9.585 degrees
! Estimated noise=1.89193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000899937 Jy
! Component: 100  -  total flux cleaned = 0.00103814 Jy
! Component: 150  -  total flux cleaned = 0.0010404 Jy
! Component: 200  -  total flux cleaned = 0.00104262 Jy
! Total flux subtracted in 200 components = 0.00104262 Jy
! Clean residual min=-0.004978 max=0.004751 Jy/beam
! Clean residual mean=0.000179 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.397684 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.397684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173908Jy  sigma=0.669341
! Fit after  self-cal, rms=0.173927Jy  sigma=0.669265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.42274e-06 Jy
! Component: 100  -  total flux cleaned = 7.83459e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110261 Jy
! Component: 200  -  total flux cleaned = 0.000137337 Jy
! Total flux subtracted in 200 components = 0.000137337 Jy
! Clean residual min=-0.004919 max=0.004763 Jy/beam
! Clean residual mean=0.000180 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.397821 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.397821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173880Jy  sigma=0.669321
! Fit after  self-cal, rms=0.173881Jy  sigma=0.669311
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173881Jy  sigma=0.669311
! Fit after  self-cal, rms=0.173302Jy  sigma=0.668936
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.459 mas, bmaj=11.36 mas, bpa=-9.615 degrees
! Estimated noise=1.89022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507649 Jy
! Component: 100  -  total flux cleaned = 0.000643784 Jy
! Component: 150  -  total flux cleaned = 0.0007418 Jy
! Component: 200  -  total flux cleaned = 0.000876952 Jy
! Total flux subtracted in 200 components = 0.000876952 Jy
! Clean residual min=-0.004858 max=0.004711 Jy/beam
! Clean residual mean=0.000143 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.398698 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.398698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173235Jy  sigma=0.668937
! Fit after  self-cal, rms=0.173238Jy  sigma=0.668921
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60733e-05 Jy
! Component: 100  -  total flux cleaned = 1.01534e-05 Jy
! Component: 150  -  total flux cleaned = 3.20834e-05 Jy
! Component: 200  -  total flux cleaned = 6.98549e-05 Jy
! Total flux subtracted in 200 components = 6.98549e-05 Jy
! Clean residual min=-0.004847 max=0.004710 Jy/beam
! Clean residual mean=0.000142 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.398768 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.398768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173215Jy  sigma=0.668972
! Fit after  self-cal, rms=0.173222Jy  sigma=0.668961
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173222Jy  sigma=0.668961
! Fit after  self-cal, rms=0.172513Jy  sigma=0.668734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.997 mas, bmaj=14.28 mas, bpa=-12.07 degrees
! Estimated noise=2.20072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132918 Jy
! Component: 100  -  total flux cleaned = 0.00136297 Jy
! Component: 150  -  total flux cleaned = 0.00133137 Jy
! Component: 200  -  total flux cleaned = 0.0013029 Jy
! Total flux subtracted in 200 components = 0.0013029 Jy
! Clean residual min=-0.004426 max=0.005017 Jy/beam
! Clean residual mean=0.000220 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.400071 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.400071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172522Jy  sigma=0.668784
! Fit after  self-cal, rms=0.172493Jy  sigma=0.668760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.3167e-05 Jy
! Component: 100  -  total flux cleaned = 1.18241e-06 Jy
! Component: 150  -  total flux cleaned = -1.94436e-05 Jy
! Component: 200  -  total flux cleaned = -3.9412e-05 Jy
! Total flux subtracted in 200 components = -3.9412e-05 Jy
! Clean residual min=-0.004386 max=0.005034 Jy/beam
! Clean residual mean=0.000223 rms=0.001367 Jy/beam
! Combined flux in latest and established models = 0.400032 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 83 components and 0.400032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172504Jy  sigma=0.668888
! Fit after  self-cal, rms=0.172485Jy  sigma=0.668881
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.456 mas, bmaj=11.38 mas, bpa=-9.633 degrees
! Estimated noise=1.88817 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.456 x 11.38 at -9.633 degrees (North through East)
! Clean map  min=-0.0045535  max=0.3503 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=11.21 mas, bpa=-12.13 degrees
! Estimated noise=2.38932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.266304 Jy
! Component: 100  -  total flux cleaned = 0.33204 Jy
! Component: 150  -  total flux cleaned = 0.362229 Jy
! Component: 200  -  total flux cleaned = 0.377863 Jy
! Total flux subtracted in 200 components = 0.377863 Jy
! Clean residual min=-0.007286 max=0.009145 Jy/beam
! Clean residual mean=0.000061 rms=0.002027 Jy/beam
! Combined flux in latest and established models = 0.377863 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.377863 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.456 mas, bmaj=11.38 mas, bpa=-9.633 degrees
! Estimated noise=1.88817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109461 Jy
! Component: 100  -  total flux cleaned = 0.016667 Jy
! Component: 150  -  total flux cleaned = 0.017715 Jy
! Component: 200  -  total flux cleaned = 0.018544 Jy
! Total flux subtracted in 200 components = 0.018544 Jy
! Clean residual min=-0.004658 max=0.004476 Jy/beam
! Clean residual mean=0.000205 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.396407 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 47 components and 0.396407 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.997 mas, bmaj=14.28 mas, bpa=-12.07 degrees
! Estimated noise=2.20072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265752 Jy
! Component: 100  -  total flux cleaned = 0.00299163 Jy
! Component: 150  -  total flux cleaned = 0.00304831 Jy
! Component: 200  -  total flux cleaned = 0.00309397 Jy
! Total flux subtracted in 200 components = 0.00309397 Jy
! Clean residual min=-0.004353 max=0.005029 Jy/beam
! Clean residual mean=0.000253 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.399501 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.68235e-05 Jy
! Component: 100  -  total flux cleaned = 2.04893e-05 Jy
! Component: 150  -  total flux cleaned = 6.68364e-06 Jy
! Component: 200  -  total flux cleaned = 6.60245e-06 Jy
! Total flux subtracted in 200 components = 6.60245e-06 Jy
! Clean residual min=-0.004336 max=0.005024 Jy/beam
! Clean residual mean=0.000252 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 0.399507 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 54 components and 0.399507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.456 mas, bmaj=11.38 mas, bpa=-9.633 degrees
! Estimated noise=1.88817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000487554 Jy
! Component: 100  -  total flux cleaned = -0.000549552 Jy
! Component: 150  -  total flux cleaned = -0.000603472 Jy
! Component: 200  -  total flux cleaned = -0.000693497 Jy
! Total flux subtracted in 200 components = -0.000693497 Jy
! Clean residual min=-0.004658 max=0.004562 Jy/beam
! Clean residual mean=0.000132 rms=0.001108 Jy/beam
! Combined flux in latest and established models = 0.398814 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.398814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172529Jy  sigma=0.668839
! Fit after  self-cal, rms=0.172437Jy  sigma=0.668782
wmodel J2130-0927_S_map.mod
! Writing 69 model components to file: J2130-0927_S_map.mod
wobs   J2130-0927_S_uvs.fits
! Writing UV FITS file: J2130-0927_S_uvs.fits
wwins  J2130-0927_S_map.win
! wwins: Wrote 1 windows to J2130-0927_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.46279e-05 Jy
! Component: 100  -  total flux cleaned = 0.00064439 Jy
! Component: 150  -  total flux cleaned = 0.00115663 Jy
! Component: 200  -  total flux cleaned = 0.00157926 Jy
! Component: 250  -  total flux cleaned = 0.00185319 Jy
! Component: 300  -  total flux cleaned = 0.00205302 Jy
! Component: 350  -  total flux cleaned = 0.00224669 Jy
! Component: 400  -  total flux cleaned = 0.0024964 Jy
! Component: 450  -  total flux cleaned = 0.00255697 Jy
! Component: 500  -  total flux cleaned = 0.0027969 Jy
! Component: 550  -  total flux cleaned = 0.0029725 Jy
! Component: 600  -  total flux cleaned = 0.00314374 Jy
! Component: 650  -  total flux cleaned = 0.00336829 Jy
! Component: 700  -  total flux cleaned = 0.00353341 Jy
! Component: 750  -  total flux cleaned = 0.00369608 Jy
! Component: 800  -  total flux cleaned = 0.00396245 Jy
! Component: 850  -  total flux cleaned = 0.00411973 Jy
! Component: 900  -  total flux cleaned = 0.00432611 Jy
! Component: 950  -  total flux cleaned = 0.00442792 Jy
! Component: 1000  -  total flux cleaned = 0.00447843 Jy
! Component: 1050  -  total flux cleaned = 0.00467641 Jy
! Component: 1100  -  total flux cleaned = 0.00467616 Jy
! Component: 1150  -  total flux cleaned = 0.00482034 Jy
! Component: 1200  -  total flux cleaned = 0.00482011 Jy
! Component: 1250  -  total flux cleaned = 0.00486766 Jy
! Component: 1300  -  total flux cleaned = 0.00500793 Jy
! Component: 1350  -  total flux cleaned = 0.0051 Jy
! Component: 1400  -  total flux cleaned = 0.00514557 Jy
! Component: 1450  -  total flux cleaned = 0.00523577 Jy
! Component: 1500  -  total flux cleaned = 0.00528063 Jy
! Component: 1550  -  total flux cleaned = 0.00536913 Jy
! Component: 1600  -  total flux cleaned = 0.00549979 Jy
! Component: 1650  -  total flux cleaned = 0.00554271 Jy
! Component: 1700  -  total flux cleaned = 0.00562823 Jy
! Component: 1750  -  total flux cleaned = 0.00558623 Jy
! Component: 1800  -  total flux cleaned = 0.00571228 Jy
! Component: 1850  -  total flux cleaned = 0.00579536 Jy
! Component: 1900  -  total flux cleaned = 0.00587775 Jy
! Component: 1950  -  total flux cleaned = 0.00591822 Jy
! Component: 2000  -  total flux cleaned = 0.00591852 Jy
! Component: 2050  -  total flux cleaned = 0.00599877 Jy
! Component: 2100  -  total flux cleaned = 0.00607799 Jy
! Component: 2150  -  total flux cleaned = 0.00603855 Jy
! Component: 2200  -  total flux cleaned = 0.00607763 Jy
! Component: 2250  -  total flux cleaned = 0.00603895 Jy
! Component: 2300  -  total flux cleaned = 0.00600052 Jy
! Component: 2350  -  total flux cleaned = 0.00603878 Jy
! Component: 2400  -  total flux cleaned = 0.00603869 Jy
! Component: 2450  -  total flux cleaned = 0.00603844 Jy
! Component: 2500  -  total flux cleaned = 0.00596403 Jy
! Component: 2550  -  total flux cleaned = 0.00600111 Jy
! Component: 2600  -  total flux cleaned = 0.00596453 Jy
! Component: 2650  -  total flux cleaned = 0.00600092 Jy
! Component: 2700  -  total flux cleaned = 0.00603686 Jy
! Component: 2750  -  total flux cleaned = 0.00600075 Jy
! Component: 2800  -  total flux cleaned = 0.00603648 Jy
! Component: 2850  -  total flux cleaned = 0.00596539 Jy
! Component: 2900  -  total flux cleaned = 0.00596558 Jy
! Component: 2950  -  total flux cleaned = 0.00600071 Jy
! Component: 3000  -  total flux cleaned = 0.00600056 Jy
! Component: 3050  -  total flux cleaned = 0.00596563 Jy
! Component: 3100  -  total flux cleaned = 0.00596547 Jy
! Component: 3150  -  total flux cleaned = 0.00593116 Jy
! Component: 3200  -  total flux cleaned = 0.00596513 Jy
! Component: 3250  -  total flux cleaned = 0.00589733 Jy
! Component: 3300  -  total flux cleaned = 0.00589755 Jy
! Component: 3350  -  total flux cleaned = 0.00589755 Jy
! Component: 3400  -  total flux cleaned = 0.00593084 Jy
! Component: 3450  -  total flux cleaned = 0.00593071 Jy
! Component: 3500  -  total flux cleaned = 0.00589769 Jy
! Component: 3550  -  total flux cleaned = 0.00583215 Jy
! Component: 3600  -  total flux cleaned = 0.00583217 Jy
! Component: 3650  -  total flux cleaned = 0.00583213 Jy
! Component: 3700  -  total flux cleaned = 0.00579994 Jy
! Component: 3750  -  total flux cleaned = 0.00583222 Jy
! Component: 3800  -  total flux cleaned = 0.00580007 Jy
! Component: 3850  -  total flux cleaned = 0.00576816 Jy
! Component: 3900  -  total flux cleaned = 0.00573652 Jy
! Component: 3950  -  total flux cleaned = 0.00570496 Jy
! Component: 4000  -  total flux cleaned = 0.00570503 Jy
! Component: 4050  -  total flux cleaned = 0.00567385 Jy
! Total flux subtracted in 4096 components = 0.00567397 Jy
! Clean residual min=-0.001739 max=0.001701 Jy/beam
! Clean residual mean=-0.000020 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.404488 Jy
keep
! Adding 262 model components to the UV plane model.
! The established model now contains 331 components and 0.404488 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv102_uvs/J2130-0927_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.456 x 11.38 at -9.633 degrees (North through East)
! Clean map  min=-0.0035687  max=0.34889 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2130-0927_S_map.fits
wmodel /scr/pima/rv102_uvs/J2130-0927_S_map.mod
! Writing 331 model components to file: /scr/pima/rv102_uvs/J2130-0927_S_map.mod
wobs   /scr/pima/rv102_uvs/J2130-0927_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J2130-0927_S_uvs.fits
wwins  /scr/pima/rv102_uvs/J2130-0927_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J2130-0927_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.348891 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000552709 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.475256 0.475256 0.950513 1.90103 3.80205 7.6041 15.2082 30.4164 60.8328
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.348 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  631.238 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J2130-0927_S_dfm.log closed on Sat Nov  9 09:36:27 2019