! Started logfile: /scr/pima/rv102_uvs/J2115+2933_X_dfm.log on Sat Nov 9 10:21:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J2115+2933_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2115+2933_X_uva.fits ! AN table 1: 51 integrations on 55 of 55 possible baselines. ! AN table 2: 97 integrations on 10 of 10 possible baselines. ! AN table 3: 9 integrations on 1 of 1 possible baselines. ! AN table 4: 9 integrations on 6 of 6 possible baselines. ! AN table 5: 29 integrations on 36 of 36 possible baselines. ! AN table 6: 87 integrations on 3 of 3 possible baselines. ! AN table 7: 50 integrations on 21 of 21 possible baselines. ! AN table 8: 282 integrations on 6 of 6 possible baselines. ! AN table 9: 34 integrations on 1 of 1 possible baselines. ! AN table 10: 41 integrations on 3 of 3 possible baselines. ! AN table 11: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.587365 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 23652 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2115+2933_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 222 telescope corrections were flagged in sub-array 1. ! A total of 161 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 131 telescope corrections were flagged in sub-array 5. ! A total of 126 telescope corrections were flagged in sub-array 6. ! A total of 248 telescope corrections were flagged in sub-array 7. ! A total of 335 telescope corrections were flagged in sub-array 8. ! A total of 68 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 202 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! A total of 161 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 131 telescope corrections were flagged in sub-array 5. ! A total of 126 telescope corrections were flagged in sub-array 6. ! A total of 248 telescope corrections were flagged in sub-array 7. ! A total of 335 telescope corrections were flagged in sub-array 8. ! A total of 68 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 202 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 255 telescope corrections were flagged in sub-array 1. ! A total of 225 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 149 telescope corrections were flagged in sub-array 5. ! A total of 261 telescope corrections were flagged in sub-array 6. ! A total of 264 telescope corrections were flagged in sub-array 7. ! A total of 795 telescope corrections were flagged in sub-array 8. ! A total of 68 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 235 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 255 telescope corrections were flagged in sub-array 1. ! A total of 225 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 149 telescope corrections were flagged in sub-array 5. ! A total of 261 telescope corrections were flagged in sub-array 6. ! A total of 264 telescope corrections were flagged in sub-array 7. ! A total of 795 telescope corrections were flagged in sub-array 8. ! A total of 68 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 235 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=1.091101Jy sigma=14.486237 ! Fit after self-cal, rms=0.648914Jy sigma=8.550090 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5432 mas, bmaj=1.081 mas, bpa=-12.86 degrees ! Estimated noise=0.629749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280358 Jy ! Component: 100 - total flux cleaned = 0.375117 Jy ! Total flux subtracted in 100 components = 0.375117 Jy ! Clean residual min=-0.012379 max=0.043645 Jy/beam ! Clean residual mean=0.000030 rms=0.003211 Jy/beam ! Combined flux in latest and established models = 0.375117 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.375117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206029Jy sigma=2.413467 ! Fit after self-cal, rms=0.204957Jy sigma=2.408367 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531974 Jy ! Component: 100 - total flux cleaned = 0.0869673 Jy ! Total flux subtracted in 100 components = 0.0869673 Jy ! Clean residual min=-0.008495 max=0.018187 Jy/beam ! Clean residual mean=0.000032 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.462084 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.462084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186025Jy sigma=2.062700 ! Fit after self-cal, rms=0.185507Jy sigma=2.058744 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02399 Jy ! Component: 100 - total flux cleaned = 0.0395332 Jy ! Total flux subtracted in 100 components = 0.0395332 Jy ! Clean residual min=-0.006340 max=0.010446 Jy/beam ! Clean residual mean=0.000033 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.501617 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.501617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181254Jy sigma=1.973774 ! Fit after self-cal, rms=0.181095Jy sigma=1.972326 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012018 Jy ! Component: 100 - total flux cleaned = 0.019656 Jy ! Total flux subtracted in 100 components = 0.019656 Jy ! Clean residual min=-0.006297 max=0.008403 Jy/beam ! Clean residual mean=0.000034 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.521273 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.521273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180026Jy sigma=1.948912 ! Fit after self-cal, rms=0.179978Jy sigma=1.948462 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Added new window around map position (1.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847373 Jy ! Component: 100 - total flux cleaned = 0.0135826 Jy ! Total flux subtracted in 100 components = 0.0135826 Jy ! Clean residual min=-0.006277 max=0.007666 Jy/beam ! Clean residual mean=0.000034 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.534856 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.534856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179532Jy sigma=1.938428 ! Fit after self-cal, rms=0.179465Jy sigma=1.937614 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.624 mas, bmaj=1.246 mas, bpa=-14.13 degrees ! Estimated noise=0.449222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973503 Jy ! Component: 100 - total flux cleaned = 0.0156308 Jy ! Component: 150 - total flux cleaned = 0.0198231 Jy ! Component: 200 - total flux cleaned = 0.0228746 Jy ! Total flux subtracted in 200 components = 0.0228746 Jy ! Clean residual min=-0.005355 max=0.006073 Jy/beam ! Clean residual mean=0.000168 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.55773 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.55773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178833Jy sigma=1.928438 ! Fit after self-cal, rms=0.178722Jy sigma=1.927026 ! Inverting map ! Your choice of large map pixels excluded 1.59% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.624 x 1.246 at -14.13 degrees (North through East) ! Clean map min=-0.0043006 max=0.37536 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.99 KP 1.01 LA 0.98 ! MA 1.03 NY 0.97 ON 1.03 PT 0.99 ! SC 1.02 WF 1.15 WZ 1.00 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.99 NY 1.03 ON 0.99 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00 LA 1.07 MK 1.00 NL 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 HN 1.03 KP 1.02 LA 0.99 ! MK 1.05 NY 1.10 PT 0.97 SC 1.02 ! WF 0.99 ! ! A total of 135 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.99 KP 0.96 LA 1.04 MK 1.05 ! NL 1.08 NY 1.13 PT 1.01 ! ! A total of 309 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 1.01 NY 1.00 ON 1.03 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.01 HN 0.98 LA 0.98 MA 1.05 ! NY 0.98 ON 0.96 PT 0.99 SC 0.99 ! WF 0.96 WZ 0.96 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.94 KP 0.98 LA 1.00 ! MA 1.01 NY 1.00 ON 1.02 PT 1.01 ! SC 1.05 WF 1.12 WZ 1.01 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.95 NY 0.98 ON 0.99 WF 0.93 ! WZ 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00 LA 1.02 MK 0.93 NL 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 HN 1.01 KP 0.98 LA 1.02 ! MK 1.01 NY 1.05 PT 1.00 SC 0.99 ! WF 0.93 ! ! A total of 135 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 KP 1.00 LA 1.00 MK 1.03 ! NL 1.01 NY 1.14 PT 1.00 ! ! A total of 309 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.98 NY 1.06 ON 1.01 WZ 0.96 ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.01 HN 0.93 LA 1.02 MA 0.96 ! NY 1.08 ON 1.02 PT 1.02 SC 0.93 ! WF 0.97 WZ 0.99 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.95 KP 1.01 LA 0.98 ! MA 1.14 NY 1.00* ON 0.97 PT 1.01 ! SC 1.00 WF 1.07 WZ 0.97 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.08 NY 1.00* ON 1.01 WF 1.05 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.11 LA 1.02 MK 1.04 NL 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.06 KP 1.01 LA 1.00 ! MK 0.99 NY 1.00* PT 1.00 SC 0.95 ! WF 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00 KP 1.00 LA 1.02 MK 1.03 ! NL 1.04 NY 1.00* PT 1.01 ! ! A total of 333 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 0.99 HN 0.90 LA 1.02 MA 1.04 ! NY 1.00* ON 0.97 PT 1.00 SC 0.98 ! WF 0.94 WZ 1.02 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.96 KP 0.99 LA 1.02 ! MA 1.18 NY 1.00* ON 1.00 PT 1.01 ! SC 0.98 WF 1.16 WZ 0.99 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.07 NY 1.00* ON 0.99 WF 0.89 ! WZ 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00 LA 1.08 MK 0.95 NL 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.27 HN 1.01 KP 1.01 LA 1.02 ! MK 0.96 NY 1.00* PT 0.98 SC 0.95 ! WF 0.97 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.09 KP 0.99 LA 0.99 MK 0.99 ! NL 1.04 NY 1.00* PT 1.03 ! ! A total of 333 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 0.99 HN 0.94 LA 0.99 MA 1.11 ! NY 1.00* ON 1.04 PT 0.97 SC 0.92 ! WF 0.98 WZ 1.00 ! ! ! Fit before self-cal, rms=0.178722Jy sigma=1.927026 ! Fit after self-cal, rms=0.176753Jy sigma=1.899181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5995 mas, bmaj=1.282 mas, bpa=-12.71 degrees ! Estimated noise=0.474049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508208 Jy ! Component: 100 - total flux cleaned = 0.0084002 Jy ! Component: 150 - total flux cleaned = 0.0104981 Jy ! Component: 200 - total flux cleaned = 0.0111529 Jy ! Total flux subtracted in 200 components = 0.0111529 Jy ! Clean residual min=-0.004101 max=0.004516 Jy/beam ! Clean residual mean=0.000141 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.568883 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.568883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176548Jy sigma=1.896580 ! Fit after self-cal, rms=0.176691Jy sigma=1.896059 ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176691Jy sigma=1.896059 ! Fit after self-cal, rms=0.176785Jy sigma=1.891054 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5995 mas, bmaj=1.28 mas, bpa=-12.72 degrees ! Estimated noise=0.473986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323806 Jy ! Component: 100 - total flux cleaned = 0.00446724 Jy ! Component: 150 - total flux cleaned = 0.00467906 Jy ! Component: 200 - total flux cleaned = 0.00486795 Jy ! Total flux subtracted in 200 components = 0.00486795 Jy ! Clean residual min=-0.003870 max=0.003620 Jy/beam ! Clean residual mean=0.000116 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.573751 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.573751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176699Jy sigma=1.889936 ! Fit after self-cal, rms=0.176747Jy sigma=1.889691 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106649 Jy ! Component: 100 - total flux cleaned = 0.0011287 Jy ! Component: 150 - total flux cleaned = 0.00107538 Jy ! Component: 200 - total flux cleaned = 0.00107477 Jy ! Total flux subtracted in 200 components = 0.00107477 Jy ! Clean residual min=-0.003777 max=0.003573 Jy/beam ! Clean residual mean=0.000113 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.574826 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.574826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176714Jy sigma=1.889222 ! Fit after self-cal, rms=0.176702Jy sigma=1.889178 ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176702Jy sigma=1.889178 ! Fit after self-cal, rms=0.176447Jy sigma=1.885817 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5995 mas, bmaj=1.277 mas, bpa=-12.79 degrees ! Estimated noise=0.473577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225823 Jy ! Component: 100 - total flux cleaned = 0.00309182 Jy ! Component: 150 - total flux cleaned = 0.00309313 Jy ! Component: 200 - total flux cleaned = 0.00304565 Jy ! Total flux subtracted in 200 components = 0.00304565 Jy ! Clean residual min=-0.003378 max=0.003494 Jy/beam ! Clean residual mean=0.000088 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.577872 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.577872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176401Jy sigma=1.885262 ! Fit after self-cal, rms=0.176397Jy sigma=1.885164 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.2, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153132 Jy ! Component: 100 - total flux cleaned = 0.00232242 Jy ! Component: 150 - total flux cleaned = 0.00294632 Jy ! Component: 200 - total flux cleaned = 0.00326815 Jy ! Total flux subtracted in 200 components = 0.00326815 Jy ! Clean residual min=-0.003274 max=0.003413 Jy/beam ! Clean residual mean=0.000077 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.58114 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.58114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176310Jy sigma=1.884155 ! Fit after self-cal, rms=0.176301Jy sigma=1.884029 ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176301Jy sigma=1.884029 ! Fit after self-cal, rms=0.176131Jy sigma=1.883752 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=2.391 mas, bmaj=2.684 mas, bpa=46.54 degrees ! Estimated noise=0.707456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391595 Jy ! Component: 100 - total flux cleaned = 0.00571844 Jy ! Component: 150 - total flux cleaned = 0.00619316 Jy ! Component: 200 - total flux cleaned = 0.00636679 Jy ! Total flux subtracted in 200 components = 0.00636679 Jy ! Clean residual min=-0.003484 max=0.004768 Jy/beam ! Clean residual mean=0.000169 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.587507 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.587507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176118Jy sigma=1.883863 ! Fit after self-cal, rms=0.176084Jy sigma=1.883672 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045893 Jy ! Component: 100 - total flux cleaned = 0.00638301 Jy ! Component: 150 - total flux cleaned = 0.00757102 Jy ! Component: 200 - total flux cleaned = 0.00821077 Jy ! Total flux subtracted in 200 components = 0.00821077 Jy ! Clean residual min=-0.003377 max=0.003890 Jy/beam ! Clean residual mean=0.000101 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.595718 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 146 components and 0.595718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176016Jy sigma=1.882695 ! Fit after self-cal, rms=0.176009Jy sigma=1.882579 ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5996 mas, bmaj=1.275 mas, bpa=-12.85 degrees ! Estimated noise=0.473492 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5996 x 1.275 at -12.85 degrees (North through East) ! Clean map min=-0.0027479 max=0.37464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5317 mas, bmaj=1.128 mas, bpa=-12.02 degrees ! Estimated noise=0.641483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.279534 Jy ! Component: 100 - total flux cleaned = 0.376607 Jy ! Component: 150 - total flux cleaned = 0.431306 Jy ! Component: 200 - total flux cleaned = 0.465497 Jy ! Total flux subtracted in 200 components = 0.465497 Jy ! Clean residual min=-0.006613 max=0.018006 Jy/beam ! Clean residual mean=0.000020 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.465497 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.465497 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5996 mas, bmaj=1.275 mas, bpa=-12.85 degrees ! Estimated noise=0.473492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332865 Jy ! Component: 100 - total flux cleaned = 0.0541584 Jy ! Component: 150 - total flux cleaned = 0.0687886 Jy ! Component: 200 - total flux cleaned = 0.0795989 Jy ! Total flux subtracted in 200 components = 0.0795989 Jy ! Clean residual min=-0.004219 max=0.006763 Jy/beam ! Clean residual mean=0.000149 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.545096 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 0.545096 Jy ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Added new window around map position (0.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00849274 Jy ! Component: 100 - total flux cleaned = 0.0152491 Jy ! Component: 150 - total flux cleaned = 0.0207526 Jy ! Component: 200 - total flux cleaned = 0.0254388 Jy ! Total flux subtracted in 200 components = 0.0254388 Jy ! Clean residual min=-0.003402 max=0.003744 Jy/beam ! Clean residual mean=0.000092 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.570535 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 81 components and 0.570535 Jy ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Added new window around map position (-0.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424533 Jy ! Component: 100 - total flux cleaned = 0.00744515 Jy ! Component: 150 - total flux cleaned = 0.0101806 Jy ! Component: 200 - total flux cleaned = 0.012655 Jy ! Total flux subtracted in 200 components = 0.012655 Jy ! Clean residual min=-0.003254 max=0.003586 Jy/beam ! Clean residual mean=0.000063 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.58319 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 110 components and 0.58319 Jy ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Added new window around map position (-46.8, -50.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296899 Jy ! Component: 100 - total flux cleaned = 0.00512927 Jy ! Component: 150 - total flux cleaned = 0.00647005 Jy ! Component: 200 - total flux cleaned = 0.00755086 Jy ! Total flux subtracted in 200 components = 0.00755086 Jy ! Clean residual min=-0.003242 max=0.003146 Jy/beam ! Clean residual mean=0.000049 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.590741 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 131 components and 0.590741 Jy ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=2.391 mas, bmaj=2.684 mas, bpa=46.54 degrees ! Estimated noise=0.707456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398863 Jy ! Component: 100 - total flux cleaned = 0.00637283 Jy ! Component: 150 - total flux cleaned = 0.00782623 Jy ! Component: 200 - total flux cleaned = 0.00841892 Jy ! Total flux subtracted in 200 components = 0.00841892 Jy ! Clean residual min=-0.003278 max=0.004082 Jy/beam ! Clean residual mean=0.000095 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.59916 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295088 Jy ! Component: 100 - total flux cleaned = 0.00051191 Jy ! Component: 150 - total flux cleaned = 0.000662406 Jy ! Component: 200 - total flux cleaned = 0.000849994 Jy ! Total flux subtracted in 200 components = 0.000849994 Jy ! Clean residual min=-0.003250 max=0.004111 Jy/beam ! Clean residual mean=0.000085 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.60001 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 185 components and 0.600009 Jy ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! Estimated beam: bmin=0.5996 mas, bmaj=1.275 mas, bpa=-12.85 degrees ! Estimated noise=0.473492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140989 Jy ! Component: 100 - total flux cleaned = -0.00188179 Jy ! Component: 150 - total flux cleaned = -0.00188507 Jy ! Component: 200 - total flux cleaned = -0.0020226 Jy ! Total flux subtracted in 200 components = -0.0020226 Jy ! Clean residual min=-0.003222 max=0.003085 Jy/beam ! Clean residual mean=0.000030 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.597987 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 205 components and 0.597987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175846Jy sigma=1.880299 ! Fit after self-cal, rms=0.175805Jy sigma=1.879852 wmodel J2115+2933_X_map.mod ! Writing 205 model components to file: J2115+2933_X_map.mod wobs J2115+2933_X_uvs.fits ! Writing UV FITS file: J2115+2933_X_uvs.fits wwins J2115+2933_X_map.win ! wwins: Wrote 9 windows to J2115+2933_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303814 Jy ! Component: 100 - total flux cleaned = -0.000358489 Jy ! Component: 150 - total flux cleaned = -0.00040999 Jy ! Component: 200 - total flux cleaned = -0.000559843 Jy ! Component: 250 - total flux cleaned = -0.000707201 Jy ! Component: 300 - total flux cleaned = -0.000995726 Jy ! Component: 350 - total flux cleaned = -0.00118466 Jy ! Component: 400 - total flux cleaned = -0.0014633 Jy ! Component: 450 - total flux cleaned = -0.00159971 Jy ! Component: 500 - total flux cleaned = -0.00169013 Jy ! Component: 550 - total flux cleaned = -0.00177929 Jy ! Component: 600 - total flux cleaned = -0.00186741 Jy ! Component: 650 - total flux cleaned = -0.0017796 Jy ! Component: 700 - total flux cleaned = -0.00177992 Jy ! Component: 750 - total flux cleaned = -0.00182323 Jy ! Component: 800 - total flux cleaned = -0.00169493 Jy ! Component: 850 - total flux cleaned = -0.00152645 Jy ! Component: 900 - total flux cleaned = -0.00165234 Jy ! Component: 950 - total flux cleaned = -0.001486 Jy ! Component: 1000 - total flux cleaned = -0.00152777 Jy ! Component: 1050 - total flux cleaned = -0.00144573 Jy ! Component: 1100 - total flux cleaned = -0.00140564 Jy ! Component: 1150 - total flux cleaned = -0.00136569 Jy ! Component: 1200 - total flux cleaned = -0.00124558 Jy ! Component: 1250 - total flux cleaned = -0.0011264 Jy ! Component: 1300 - total flux cleaned = -0.00108666 Jy ! Component: 1350 - total flux cleaned = -0.000968772 Jy ! Component: 1400 - total flux cleaned = -0.000852306 Jy ! Component: 1450 - total flux cleaned = -0.000697785 Jy ! Component: 1500 - total flux cleaned = -0.000659528 Jy ! Component: 1550 - total flux cleaned = -0.000544917 Jy ! Component: 1600 - total flux cleaned = -0.000431217 Jy ! Component: 1650 - total flux cleaned = -0.00024257 Jy ! Component: 1700 - total flux cleaned = -0.000280068 Jy ! Component: 1750 - total flux cleaned = -5.66676e-05 Jy ! Component: 1800 - total flux cleaned = 9.13426e-05 Jy ! Component: 1850 - total flux cleaned = 0.000238182 Jy ! Component: 1900 - total flux cleaned = 0.000347668 Jy ! Component: 1950 - total flux cleaned = 0.000529313 Jy ! Component: 2000 - total flux cleaned = 0.000529302 Jy ! Component: 2050 - total flux cleaned = 0.000852282 Jy ! Component: 2100 - total flux cleaned = 0.000852572 Jy ! Component: 2150 - total flux cleaned = 0.000994463 Jy ! Component: 2200 - total flux cleaned = 0.00113587 Jy ! Component: 2250 - total flux cleaned = 0.00131122 Jy ! Component: 2300 - total flux cleaned = 0.00138128 Jy ! Component: 2350 - total flux cleaned = 0.00158919 Jy ! Component: 2400 - total flux cleaned = 0.00165844 Jy ! Component: 2450 - total flux cleaned = 0.00179567 Jy ! Component: 2500 - total flux cleaned = 0.00196665 Jy ! Component: 2550 - total flux cleaned = 0.00200052 Jy ! Component: 2600 - total flux cleaned = 0.00203475 Jy ! Component: 2650 - total flux cleaned = 0.00206862 Jy ! Component: 2700 - total flux cleaned = 0.00213574 Jy ! Component: 2750 - total flux cleaned = 0.00233568 Jy ! Component: 2800 - total flux cleaned = 0.00240213 Jy ! Component: 2850 - total flux cleaned = 0.00250128 Jy ! Component: 2900 - total flux cleaned = 0.00260015 Jy ! Component: 2950 - total flux cleaned = 0.00246902 Jy ! Component: 3000 - total flux cleaned = 0.00256668 Jy ! Component: 3050 - total flux cleaned = 0.00272853 Jy ! Component: 3100 - total flux cleaned = 0.00282545 Jy ! Component: 3150 - total flux cleaned = 0.00285782 Jy ! Component: 3200 - total flux cleaned = 0.00295392 Jy ! Component: 3250 - total flux cleaned = 0.00304957 Jy ! Component: 3300 - total flux cleaned = 0.00308135 Jy ! Component: 3350 - total flux cleaned = 0.00320759 Jy ! Component: 3400 - total flux cleaned = 0.00330186 Jy ! Component: 3450 - total flux cleaned = 0.00333322 Jy ! Component: 3500 - total flux cleaned = 0.00358235 Jy ! Component: 3550 - total flux cleaned = 0.00355136 Jy ! Component: 3600 - total flux cleaned = 0.00361294 Jy ! Component: 3650 - total flux cleaned = 0.00379737 Jy ! Component: 3700 - total flux cleaned = 0.00398125 Jy ! Component: 3750 - total flux cleaned = 0.00398124 Jy ! Component: 3800 - total flux cleaned = 0.00416338 Jy ! Component: 3850 - total flux cleaned = 0.00431454 Jy ! Component: 3900 - total flux cleaned = 0.00428435 Jy ! Component: 3950 - total flux cleaned = 0.00437446 Jy ! Component: 4000 - total flux cleaned = 0.00452413 Jy ! Component: 4050 - total flux cleaned = 0.00443461 Jy ! Total flux subtracted in 4096 components = 0.00461268 Jy ! Clean residual min=-0.001821 max=0.001745 Jy/beam ! Clean residual mean=0.000026 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.602599 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 574 components and 0.602599 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2115+2933_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5996 x 1.275 at -12.85 degrees (North through East) ! Clean map min=-0.0023318 max=0.37465 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2115+2933_X_map.fits wmodel /scr/pima/rv102_uvs/J2115+2933_X_map.mod ! Writing 574 model components to file: /scr/pima/rv102_uvs/J2115+2933_X_map.mod wobs /scr/pima/rv102_uvs/J2115+2933_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2115+2933_X_uvs.fits wwins /scr/pima/rv102_uvs/J2115+2933_X_map.win ! wwins: Wrote 10 windows to /scr/pima/rv102_uvs/J2115+2933_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.374646 invert ! Inverting map ! Your choice of large map pixels excluded 1.86% of the data. ! The x-axis pixel size should ideally be below 0.1867 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000495943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.39713 0.39713 0.79426 1.58852 3.17704 6.35408 12.7082 25.4163 50.8326 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.374 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 755.42 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2115+2933_X_dfm.log closed on Sat Nov 9 10:22:01 2019