! Started logfile: /scr/pima/rv102_uvs/J2115+2933_S_dfm.log on Sat Nov 9 09:36:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J2115+2933_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2115+2933_S_uva.fits ! AN table 1: 12 integrations on 55 of 55 possible baselines. ! AN table 2: 23 integrations on 10 of 10 possible baselines. ! AN table 3: 2 integrations on 1 of 1 possible baselines. ! AN table 4: 2 integrations on 6 of 6 possible baselines. ! AN table 5: 7 integrations on 36 of 36 possible baselines. ! AN table 6: 21 integrations on 3 of 3 possible baselines. ! AN table 7: 13 integrations on 21 of 21 possible baselines. ! AN table 8: 68 integrations on 6 of 6 possible baselines. ! AN table 9: 8 integrations on 1 of 1 possible baselines. ! AN table 10: 10 integrations on 3 of 3 possible baselines. ! AN table 11: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.677764 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 6596 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2115+2933_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 50 telescope corrections were flagged in sub-array 7. ! A total of 72 telescope corrections were flagged in sub-array 8. ! A total of 16 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 38 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 57 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 50 telescope corrections were flagged in sub-array 7. ! A total of 176 telescope corrections were flagged in sub-array 8. ! A total of 16 telescope corrections were flagged in sub-array 9. ! A total of 30 telescope corrections were flagged in sub-array 10. ! A total of 48 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 50 telescope corrections were flagged in sub-array 7. ! A total of 72 telescope corrections were flagged in sub-array 8. ! A total of 16 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 38 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 57 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 50 telescope corrections were flagged in sub-array 7. ! A total of 176 telescope corrections were flagged in sub-array 8. ! A total of 16 telescope corrections were flagged in sub-array 9. ! A total of 30 telescope corrections were flagged in sub-array 10. ! A total of 48 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=1.312975Jy sigma=7.324999 ! Fit after self-cal, rms=0.420507Jy sigma=2.196302 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=3.361 mas, bpa=-12.91 degrees ! Estimated noise=2.51667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.520013 Jy ! Component: 100 - total flux cleaned = 0.638461 Jy ! Total flux subtracted in 100 components = 0.638461 Jy ! Clean residual min=-0.022449 max=0.045045 Jy/beam ! Clean residual mean=0.000192 rms=0.004799 Jy/beam ! Combined flux in latest and established models = 0.638461 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.638461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330620Jy sigma=1.026485 ! Fit after self-cal, rms=0.330549Jy sigma=1.026445 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534513 Jy ! Component: 100 - total flux cleaned = 0.0880232 Jy ! Total flux subtracted in 100 components = 0.0880232 Jy ! Clean residual min=-0.020642 max=0.024267 Jy/beam ! Clean residual mean=0.000115 rms=0.004064 Jy/beam ! Combined flux in latest and established models = 0.726484 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.726484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310633Jy sigma=0.895524 ! Fit after self-cal, rms=0.310393Jy sigma=0.894979 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=3.963 mas, bpa=-16.07 degrees ! Estimated noise=1.94013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326979 Jy ! Component: 100 - total flux cleaned = 0.0503276 Jy ! Component: 150 - total flux cleaned = 0.0610369 Jy ! Component: 200 - total flux cleaned = 0.067641 Jy ! Total flux subtracted in 200 components = 0.067641 Jy ! Clean residual min=-0.014702 max=0.019115 Jy/beam ! Clean residual mean=0.000590 rms=0.003021 Jy/beam ! Combined flux in latest and established models = 0.794125 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.794125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301448Jy sigma=0.860711 ! Fit after self-cal, rms=0.301170Jy sigma=0.859897 ! Inverting map ! Added new window around map position (-4.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116337 Jy ! Component: 100 - total flux cleaned = 0.0134144 Jy ! Component: 150 - total flux cleaned = 0.0144857 Jy ! Component: 200 - total flux cleaned = 0.0156879 Jy ! Total flux subtracted in 200 components = 0.0156879 Jy ! Clean residual min=-0.014668 max=0.012508 Jy/beam ! Clean residual mean=0.000451 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.809813 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.809813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298584Jy sigma=0.849707 ! Fit after self-cal, rms=0.298415Jy sigma=0.848333 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.519 x 3.963 at -16.07 degrees (North through East) ! Clean map min=-0.013083 max=0.67654 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.01 KP 0.97 LA 1.03 ! MA 1.24 NY 0.99 ON 0.97 PT 1.01 ! SC 1.11 WF 1.06 WZ 0.97 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.66 NY 1.00 ON 1.00 WF 1.01 ! WZ 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.95 LA 1.03 MK 1.29 NL 0.96 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 HN 0.99 KP 0.97 LA 1.02 ! MK 1.36 NY 1.00 PT 1.02 SC 1.03 ! WF 1.01 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 KP 0.98 LA 1.01 MK 0.75 ! NL 1.04 NY 0.96 PT 1.00 ! ! A total of 72 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.81 NY 1.04 ON 0.97 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.03 HN 0.96 LA 1.00 MA 0.85 ! NY 1.04 ON 0.97 PT 0.96 SC 1.06 ! WF 1.01 WZ 0.99 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.98 KP 0.98 LA 1.02 ! MA 1.00* NY 1.00 ON 1.08 PT 1.01 ! SC 1.03 WF 1.06 WZ 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.01 ON 1.06 WF 1.14 ! WZ 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.97 LA 1.00 MK 0.90 NL 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 HN 0.96 KP 0.97 LA 0.98 ! MK 0.88 NY 0.96 PT 1.00 SC 1.03 ! WF 1.01 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.03 KP 1.01 LA 0.99 MK 1.02 ! NL 1.10 NY 0.98 PT 1.01 ! ! A total of 96 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.02 HN 0.94 LA 0.97 MA 1.00* ! NY 1.01 ON 0.97 PT 1.03 SC 1.06 ! WF 1.02 WZ 1.03 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.01 KP 1.01 LA 1.04 ! MA 0.57 NY 1.06 ON 1.03 PT 1.05 ! SC 1.04 WF 1.02 WZ 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.48 NY 1.09 ON 1.00 WF 1.12 ! WZ 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.98 LA 0.99 MK 0.90 NL 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 HN 1.03 KP 1.02 LA 1.00 ! MK 0.91 NY 1.10 PT 1.01 SC 1.02 ! WF 1.04 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.06 KP 1.00 LA 0.98 MK 1.00 ! NL 1.06 NY 1.03 PT 1.01 ! ! A total of 72 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.47 NY 1.03 ON 0.99 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.07 HN 0.95 LA 1.00 MA 0.54 ! NY 1.05 ON 1.05 PT 1.04 SC 1.13 ! WF 0.98 WZ 1.09 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.07 KP 0.99 LA 1.07 ! MA 1.00* NY 1.04 ON 1.01 PT 1.04 ! SC 1.06 WF 1.06 WZ 1.00 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.13 ON 0.99 WF 1.06 ! WZ 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.04 LA 1.00 MK 1.01 NL 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 HN 1.06 KP 0.98 LA 1.05 ! MK 0.87 NY 1.02 PT 1.00 SC 1.04 ! WF 1.01 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.09 KP 1.00 LA 1.08 MK 0.69 ! NL 1.04 NY 1.03 PT 1.00 ! ! A total of 96 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.04 HN 1.02 LA 1.00 MA 1.00* ! NY 1.04 ON 1.04 PT 1.00 SC 1.14 ! WF 1.12 WZ 1.13 ! ! ! Fit before self-cal, rms=0.298415Jy sigma=0.848333 ! Fit after self-cal, rms=0.175900Jy sigma=0.686297 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=4.122 mas, bpa=-13.49 degrees ! Estimated noise=2.0172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940859 Jy ! Component: 100 - total flux cleaned = 0.014645 Jy ! Component: 150 - total flux cleaned = 0.0152771 Jy ! Component: 200 - total flux cleaned = 0.0155543 Jy ! Total flux subtracted in 200 components = 0.0155543 Jy ! Clean residual min=-0.004936 max=0.006311 Jy/beam ! Clean residual mean=0.000508 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.825367 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.825367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175212Jy sigma=0.682049 ! Fit after self-cal, rms=0.174757Jy sigma=0.681199 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174757Jy sigma=0.681199 ! Fit after self-cal, rms=0.173173Jy sigma=0.677247 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=4.117 mas, bpa=-13.43 degrees ! Estimated noise=2.02044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599227 Jy ! Component: 100 - total flux cleaned = 0.0091479 Jy ! Component: 150 - total flux cleaned = 0.00986313 Jy ! Component: 200 - total flux cleaned = 0.0102902 Jy ! Total flux subtracted in 200 components = 0.0102902 Jy ! Clean residual min=-0.004738 max=0.005467 Jy/beam ! Clean residual mean=0.000368 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.835657 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.835658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172853Jy sigma=0.675223 ! Fit after self-cal, rms=0.172885Jy sigma=0.675038 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847689 Jy ! Component: 100 - total flux cleaned = 0.00104836 Jy ! Component: 150 - total flux cleaned = 0.0011403 Jy ! Component: 200 - total flux cleaned = 0.0013099 Jy ! Total flux subtracted in 200 components = 0.0013099 Jy ! Clean residual min=-0.004608 max=0.005482 Jy/beam ! Clean residual mean=0.000356 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.836968 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.836967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172756Jy sigma=0.674323 ! Fit after self-cal, rms=0.172764Jy sigma=0.674266 ! Inverting map ! Added new window around map position (70, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257124 Jy ! Component: 100 - total flux cleaned = 0.00355491 Jy ! Component: 150 - total flux cleaned = 0.00365371 Jy ! Component: 200 - total flux cleaned = 0.00405146 Jy ! Total flux subtracted in 200 components = 0.00405146 Jy ! Clean residual min=-0.004480 max=0.005198 Jy/beam ! Clean residual mean=0.000317 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.841019 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.841019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172382Jy sigma=0.672748 ! Fit after self-cal, rms=0.172326Jy sigma=0.672621 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172326Jy sigma=0.672621 ! Fit after self-cal, rms=0.171113Jy sigma=0.667593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=4.115 mas, bpa=-13.43 degrees ! Estimated noise=2.02181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359888 Jy ! Component: 100 - total flux cleaned = 0.00521316 Jy ! Component: 150 - total flux cleaned = 0.00604245 Jy ! Component: 200 - total flux cleaned = 0.00645964 Jy ! Total flux subtracted in 200 components = 0.00645964 Jy ! Clean residual min=-0.004756 max=0.004956 Jy/beam ! Clean residual mean=0.000225 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.847478 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.847478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170938Jy sigma=0.666655 ! Fit after self-cal, rms=0.170956Jy sigma=0.666588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42, -42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469346 Jy ! Component: 100 - total flux cleaned = 0.00641228 Jy ! Component: 150 - total flux cleaned = 0.00709458 Jy ! Component: 200 - total flux cleaned = 0.0073286 Jy ! Total flux subtracted in 200 components = 0.0073286 Jy ! Clean residual min=-0.004755 max=0.004722 Jy/beam ! Clean residual mean=0.000167 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.854807 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 0.854807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170729Jy sigma=0.665458 ! Fit after self-cal, rms=0.170708Jy sigma=0.665349 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170708Jy sigma=0.665349 ! Fit after self-cal, rms=0.170693Jy sigma=0.665109 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.281 mas, bmaj=8.821 mas, bpa=6.926 degrees ! Estimated noise=2.98776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440796 Jy ! Component: 100 - total flux cleaned = 0.00617956 Jy ! Component: 150 - total flux cleaned = 0.00672712 Jy ! Component: 200 - total flux cleaned = 0.00700236 Jy ! Total flux subtracted in 200 components = 0.00700236 Jy ! Clean residual min=-0.005456 max=0.006199 Jy/beam ! Clean residual mean=0.000323 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.861809 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 142 components and 0.861809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170637Jy sigma=0.664811 ! Fit after self-cal, rms=0.170655Jy sigma=0.664675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542114 Jy ! Component: 100 - total flux cleaned = 0.000920604 Jy ! Component: 150 - total flux cleaned = 0.00112213 Jy ! Component: 200 - total flux cleaned = 0.00129026 Jy ! Total flux subtracted in 200 components = 0.00129026 Jy ! Clean residual min=-0.005533 max=0.005941 Jy/beam ! Clean residual mean=0.000289 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.8631 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 0.8631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170632Jy sigma=0.664685 ! Fit after self-cal, rms=0.170639Jy sigma=0.664627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=4.113 mas, bpa=-13.45 degrees ! Estimated noise=2.02328 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.466 x 4.113 at -13.45 degrees (North through East) ! Clean map min=-0.00507 max=0.67735 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170639Jy sigma=0.664627 ! Fit after self-cal, rms=0.171491Jy sigma=0.571728 ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=4.111 mas, bpa=-13.59 degrees ! Estimated noise=2.02484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182831 Jy ! Component: 100 - total flux cleaned = 0.00224481 Jy ! Component: 150 - total flux cleaned = 0.00239546 Jy ! Component: 200 - total flux cleaned = 0.00232372 Jy ! Total flux subtracted in 200 components = 0.00232372 Jy ! Clean residual min=-0.005075 max=0.004796 Jy/beam ! Clean residual mean=0.000050 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.865423 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 0.865423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171369Jy sigma=0.571172 ! Fit after self-cal, rms=0.171357Jy sigma=0.571147 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032255 Jy ! Component: 100 - total flux cleaned = 0.000323164 Jy ! Component: 150 - total flux cleaned = 0.000388002 Jy ! Component: 200 - total flux cleaned = 0.000387423 Jy ! Total flux subtracted in 200 components = 0.000387423 Jy ! Clean residual min=-0.005060 max=0.004759 Jy/beam ! Clean residual mean=0.000047 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.865811 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 173 components and 0.865811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171281Jy sigma=0.570820 ! Fit after self-cal, rms=0.171273Jy sigma=0.570806 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171273Jy sigma=0.570806 ! Fit after self-cal, rms=0.171465Jy sigma=0.570698 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.239 mas, bmaj=3.453 mas, bpa=-11.32 degrees ! Estimated noise=2.63423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.516122 Jy ! Component: 100 - total flux cleaned = 0.636124 Jy ! Component: 150 - total flux cleaned = 0.692634 Jy ! Component: 200 - total flux cleaned = 0.728556 Jy ! Total flux subtracted in 200 components = 0.728556 Jy ! Clean residual min=-0.008845 max=0.019234 Jy/beam ! Clean residual mean=0.000124 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 0.728556 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.728556 Jy ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=4.109 mas, bpa=-13.61 degrees ! Estimated noise=2.02692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378944 Jy ! Component: 100 - total flux cleaned = 0.0623534 Jy ! Component: 150 - total flux cleaned = 0.0796029 Jy ! Component: 200 - total flux cleaned = 0.0922887 Jy ! Total flux subtracted in 200 components = 0.0922887 Jy ! Clean residual min=-0.005154 max=0.007893 Jy/beam ! Clean residual mean=0.000475 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.820844 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 69 components and 0.820844 Jy ! Inverting map ! Added new window around map position (0.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0096926 Jy ! Component: 100 - total flux cleaned = 0.0169144 Jy ! Component: 150 - total flux cleaned = 0.0218934 Jy ! Component: 200 - total flux cleaned = 0.0261624 Jy ! Total flux subtracted in 200 components = 0.0261624 Jy ! Clean residual min=-0.005114 max=0.005271 Jy/beam ! Clean residual mean=0.000229 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.847007 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 101 components and 0.847006 Jy ! Inverting map ! Added new window around map position (42.5, -113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461194 Jy ! Component: 100 - total flux cleaned = 0.00815952 Jy ! Component: 150 - total flux cleaned = 0.0113011 Jy ! Component: 200 - total flux cleaned = 0.0132842 Jy ! Total flux subtracted in 200 components = 0.0132842 Jy ! Clean residual min=-0.005067 max=0.004433 Jy/beam ! Clean residual mean=0.000126 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.860291 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 115 components and 0.860291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=8.808 mas, bpa=6.28 degrees ! Estimated noise=3.00124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529165 Jy ! Component: 100 - total flux cleaned = 0.00708354 Jy ! Component: 150 - total flux cleaned = 0.00810728 Jy ! Component: 200 - total flux cleaned = 0.00893905 Jy ! Total flux subtracted in 200 components = 0.00893905 Jy ! Clean residual min=-0.005347 max=0.005838 Jy/beam ! Clean residual mean=0.000119 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.86923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526115 Jy ! Component: 100 - total flux cleaned = 0.00607899 Jy ! Component: 150 - total flux cleaned = 0.00625102 Jy ! Component: 200 - total flux cleaned = 0.00646862 Jy ! Total flux subtracted in 200 components = 0.00646862 Jy ! Clean residual min=-0.005295 max=0.004044 Jy/beam ! Clean residual mean=-0.000065 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.875698 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 181 components and 0.875699 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=4.109 mas, bpa=-13.61 degrees ! Estimated noise=2.02692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000446022 Jy ! Component: 100 - total flux cleaned = -0.000311107 Jy ! Component: 150 - total flux cleaned = -6.78836e-05 Jy ! Component: 200 - total flux cleaned = -6.9886e-05 Jy ! Total flux subtracted in 200 components = -6.9886e-05 Jy ! Clean residual min=-0.005210 max=0.004157 Jy/beam ! Clean residual mean=-0.000018 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.875629 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 210 components and 0.875629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171317Jy sigma=0.570452 ! Fit after self-cal, rms=0.171183Jy sigma=0.569840 wmodel J2115+2933_S_map.mod ! Writing 210 model components to file: J2115+2933_S_map.mod wobs J2115+2933_S_uvs.fits ! Writing UV FITS file: J2115+2933_S_uvs.fits wwins J2115+2933_S_map.win ! wwins: Wrote 8 windows to J2115+2933_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133015 Jy ! Component: 100 - total flux cleaned = -0.00148113 Jy ! Component: 150 - total flux cleaned = -0.00177604 Jy ! Component: 200 - total flux cleaned = -0.00184678 Jy ! Component: 250 - total flux cleaned = -0.00205451 Jy ! Component: 300 - total flux cleaned = -0.00232578 Jy ! Component: 350 - total flux cleaned = -0.00245915 Jy ! Component: 400 - total flux cleaned = -0.00265643 Jy ! Component: 450 - total flux cleaned = -0.0025923 Jy ! Component: 500 - total flux cleaned = -0.0029769 Jy ! Component: 550 - total flux cleaned = -0.00297615 Jy ! Component: 600 - total flux cleaned = -0.00303829 Jy ! Component: 650 - total flux cleaned = -0.00309936 Jy ! Component: 700 - total flux cleaned = -0.00316069 Jy ! Component: 750 - total flux cleaned = -0.00316048 Jy ! Component: 800 - total flux cleaned = -0.00334041 Jy ! Component: 850 - total flux cleaned = -0.00334008 Jy ! Component: 900 - total flux cleaned = -0.00328087 Jy ! Component: 950 - total flux cleaned = -0.00333995 Jy ! Component: 1000 - total flux cleaned = -0.00322335 Jy ! Component: 1050 - total flux cleaned = -0.00328105 Jy ! Component: 1100 - total flux cleaned = -0.00322386 Jy ! Component: 1150 - total flux cleaned = -0.00339503 Jy ! Component: 1200 - total flux cleaned = -0.00322433 Jy ! Component: 1250 - total flux cleaned = -0.00316783 Jy ! Component: 1300 - total flux cleaned = -0.00316764 Jy ! Component: 1350 - total flux cleaned = -0.00311239 Jy ! Component: 1400 - total flux cleaned = -0.003057 Jy ! Component: 1450 - total flux cleaned = -0.00300272 Jy ! Component: 1500 - total flux cleaned = -0.00305675 Jy ! Component: 1550 - total flux cleaned = -0.00311108 Jy ! Component: 1600 - total flux cleaned = -0.00305733 Jy ! Component: 1650 - total flux cleaned = -0.00305732 Jy ! Component: 1700 - total flux cleaned = -0.00316328 Jy ! Component: 1750 - total flux cleaned = -0.00305771 Jy ! Component: 1800 - total flux cleaned = -0.003058 Jy ! Component: 1850 - total flux cleaned = -0.00316268 Jy ! Component: 1900 - total flux cleaned = -0.00326679 Jy ! Component: 1950 - total flux cleaned = -0.00326677 Jy ! Component: 2000 - total flux cleaned = -0.00326683 Jy ! Component: 2050 - total flux cleaned = -0.00347078 Jy ! Component: 2100 - total flux cleaned = -0.00341993 Jy ! Component: 2150 - total flux cleaned = -0.0034202 Jy ! Component: 2200 - total flux cleaned = -0.00347092 Jy ! Component: 2250 - total flux cleaned = -0.00352098 Jy ! Component: 2300 - total flux cleaned = -0.00372047 Jy ! Component: 2350 - total flux cleaned = -0.00352193 Jy ! Component: 2400 - total flux cleaned = -0.00376896 Jy ! Component: 2450 - total flux cleaned = -0.00376879 Jy ! Component: 2500 - total flux cleaned = -0.00381747 Jy ! Component: 2550 - total flux cleaned = -0.00376879 Jy ! Component: 2600 - total flux cleaned = -0.00376896 Jy ! Component: 2650 - total flux cleaned = -0.00391401 Jy ! Component: 2700 - total flux cleaned = -0.00391385 Jy ! Component: 2750 - total flux cleaned = -0.00391383 Jy ! Component: 2800 - total flux cleaned = -0.00396117 Jy ! Component: 2850 - total flux cleaned = -0.00396121 Jy ! Component: 2900 - total flux cleaned = -0.00400875 Jy ! Component: 2950 - total flux cleaned = -0.00410283 Jy ! Component: 3000 - total flux cleaned = -0.00400923 Jy ! Component: 3050 - total flux cleaned = -0.00410257 Jy ! Component: 3100 - total flux cleaned = -0.0041489 Jy ! Component: 3150 - total flux cleaned = -0.00410272 Jy ! Component: 3200 - total flux cleaned = -0.0042408 Jy ! Component: 3250 - total flux cleaned = -0.00424084 Jy ! Component: 3300 - total flux cleaned = -0.00419518 Jy ! Component: 3350 - total flux cleaned = -0.00424073 Jy ! Component: 3400 - total flux cleaned = -0.0043312 Jy ! Component: 3450 - total flux cleaned = -0.00442129 Jy ! Component: 3500 - total flux cleaned = -0.00442123 Jy ! Component: 3550 - total flux cleaned = -0.00437655 Jy ! Component: 3600 - total flux cleaned = -0.0043767 Jy ! Component: 3650 - total flux cleaned = -0.00428782 Jy ! Component: 3700 - total flux cleaned = -0.00428782 Jy ! Component: 3750 - total flux cleaned = -0.00437643 Jy ! Component: 3800 - total flux cleaned = -0.00428867 Jy ! Component: 3850 - total flux cleaned = -0.00437629 Jy ! Component: 3900 - total flux cleaned = -0.0044199 Jy ! Component: 3950 - total flux cleaned = -0.00437624 Jy ! Component: 4000 - total flux cleaned = -0.00441962 Jy ! Component: 4050 - total flux cleaned = -0.00441954 Jy ! Total flux subtracted in 4096 components = -0.00441943 Jy ! Clean residual min=-0.002555 max=0.002705 Jy/beam ! Clean residual mean=0.000001 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.871209 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 531 components and 0.87121 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2115+2933_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.465 x 4.109 at -13.61 degrees (North through East) ! Clean map min=-0.00506 max=0.67522 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2115+2933_S_map.fits wmodel /scr/pima/rv102_uvs/J2115+2933_S_map.mod ! Writing 531 model components to file: /scr/pima/rv102_uvs/J2115+2933_S_map.mod wobs /scr/pima/rv102_uvs/J2115+2933_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2115+2933_S_uvs.fits wwins /scr/pima/rv102_uvs/J2115+2933_S_map.win ! wwins: Wrote 9 windows to /scr/pima/rv102_uvs/J2115+2933_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.675221 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000748947 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332757 0.332757 0.665513 1.33103 2.66205 5.3241 10.6482 21.2964 42.5928 85.1857 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.675 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 901.56 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2115+2933_S_dfm.log closed on Sat Nov 9 09:36:19 2019