! Started logfile: /scr/pima/rv102_uvs/J2038+5119_X_dfm.log on Sat Nov 9 10:21:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J2038+5119_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2038+5119_X_uva.fits ! AN table 1: 100 integrations on 10 of 10 possible baselines. ! AN table 2: 100 integrations on 6 of 6 possible baselines. ! AN table 3: 9 integrations on 21 of 21 possible baselines. ! AN table 4: 14 integrations on 28 of 28 possible baselines. ! AN table 5: 43 integrations on 3 of 3 possible baselines. ! AN table 6: 14 integrations on 1 of 1 possible baselines. ! AN table 7: 11 integrations on 45 of 45 possible baselines. ! AN table 8: 15 integrations on 6 of 6 possible baselines. ! AN table 9: 9 integrations on 1 of 1 possible baselines. ! AN table 10: 16 integrations on 55 of 55 possible baselines. ! AN table 11: 13 integrations on 3 of 3 possible baselines. ! AN table 12: 13 integrations on 3 of 3 possible baselines. ! AN table 13: 13 integrations on 28 of 28 possible baselines. ! AN table 14: 13 integrations on 6 of 6 possible baselines. ! AN table 15: 11 integrations on 3 of 3 possible baselines. ! AN table 16: 13 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.806877 visibilities/baseline/integration-bin. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 14924 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2038+5119_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 223 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 47 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 41 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 80 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 40 telescope corrections were flagged in sub-array 13. ! A total of 21 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 223 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 47 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 41 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 80 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 40 telescope corrections were flagged in sub-array 13. ! A total of 21 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 280 telescope corrections were flagged in sub-array 1. ! A total of 256 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 56 telescope corrections were flagged in sub-array 4. ! A total of 129 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 48 telescope corrections were flagged in sub-array 7. ! A total of 36 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 90 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 39 telescope corrections were flagged in sub-array 12. ! A total of 49 telescope corrections were flagged in sub-array 13. ! A total of 21 telescope corrections were flagged in sub-array 14. ! A total of 33 telescope corrections were flagged in sub-array 15. ! A total of 42 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 280 telescope corrections were flagged in sub-array 1. ! A total of 256 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 56 telescope corrections were flagged in sub-array 4. ! A total of 129 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 48 telescope corrections were flagged in sub-array 7. ! A total of 36 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 90 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 39 telescope corrections were flagged in sub-array 12. ! A total of 49 telescope corrections were flagged in sub-array 13. ! A total of 21 telescope corrections were flagged in sub-array 14. ! A total of 33 telescope corrections were flagged in sub-array 15. ! A total of 42 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=2.486587Jy sigma=21.457589 ! Fit after self-cal, rms=1.325611Jy sigma=11.390618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.5763 mas, bmaj=0.7635 mas, bpa=8.999 degrees ! Estimated noise=1.21604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62007 Jy ! Component: 100 - total flux cleaned = 2.03439 Jy ! Total flux subtracted in 100 components = 2.03439 Jy ! Clean residual min=-0.052293 max=0.179783 Jy/beam ! Clean residual mean=0.001099 rms=0.012150 Jy/beam ! Combined flux in latest and established models = 2.03439 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.03439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.529118Jy sigma=4.369718 ! Fit after self-cal, rms=0.528782Jy sigma=4.366782 ! Inverting map ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209573 Jy ! Component: 100 - total flux cleaned = 0.338992 Jy ! Total flux subtracted in 100 components = 0.338992 Jy ! Clean residual min=-0.044865 max=0.076514 Jy/beam ! Clean residual mean=0.000787 rms=0.008383 Jy/beam ! Combined flux in latest and established models = 2.37338 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 2.37338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391579Jy sigma=3.178457 ! Fit after self-cal, rms=0.390992Jy sigma=3.173174 ! Inverting map ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-0.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885688 Jy ! Component: 100 - total flux cleaned = 0.139546 Jy ! Total flux subtracted in 100 components = 0.139546 Jy ! Clean residual min=-0.043347 max=0.044407 Jy/beam ! Clean residual mean=0.000659 rms=0.007420 Jy/beam ! Combined flux in latest and established models = 2.51293 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 2.51293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361058Jy sigma=2.925581 ! Fit after self-cal, rms=0.360481Jy sigma=2.920064 ! Inverting map ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6909 mas, bmaj=0.8913 mas, bpa=6.681 degrees ! Estimated noise=0.928601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797758 Jy ! Component: 100 - total flux cleaned = 0.135341 Jy ! Component: 150 - total flux cleaned = 0.177957 Jy ! Component: 200 - total flux cleaned = 0.211168 Jy ! Total flux subtracted in 200 components = 0.211168 Jy ! Clean residual min=-0.029989 max=0.041842 Jy/beam ! Clean residual mean=0.003828 rms=0.007895 Jy/beam ! Combined flux in latest and established models = 2.72409 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 2.72409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333138Jy sigma=2.714623 ! Fit after self-cal, rms=0.330061Jy sigma=2.692052 ! Inverting map ! Your choice of large map pixels excluded 0.706% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6909 x 0.8913 at 6.681 degrees (North through East) ! Clean map min=-0.0232 max=2.1486 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.03 NY 0.99 ON 1.00 WF 1.09 ! WZ 0.97 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.03 NY 1.00 ON 1.00 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.96 LA 1.01 MK 1.01 ! NL 1.01 NY 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.97 MA 1.04 MK 1.03 NY 1.00 ! ON 1.03 SC 1.02 WF 1.01 WZ 0.99 ! ! A total of 69 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 0.94 KP 1.02 LA 1.00 ! MK 0.94 NL 1.01 NY 1.02 PT 1.02 ! SC 1.04 WF 0.90 ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.05 ON 0.99 WF 0.95 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.03 HN 1.06 KP 1.02 LA 1.02 ! MA 1.06 MK 1.05 NY 1.01 ON 1.04 ! PT 1.02 WF 0.90 WZ 1.02 ! ! A total of 21 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.03 HN 0.94 MA 1.05 NY 0.99 ! ON 1.00 SC 0.97 WF 0.93 WZ 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.96 ON 1.03 WF 0.98 WZ 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.91 MA 0.99 NY 0.99 ON 1.02 ! SC 1.01 WF 1.06 WZ 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.99 NY 0.98 ON 1.02 WF 1.11 ! WZ 0.99 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.97 NY 1.00 ON 1.02 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 0.96 LA 1.00 MK 1.01 ! NL 1.00 NY 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.95 MA 0.99 MK 1.01 NY 1.01 ! ON 1.08 SC 1.00 WF 1.01 WZ 1.03 ! ! A total of 69 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 0.93 KP 1.01 LA 1.00 ! MK 0.92 NL 0.99 NY 1.04 PT 1.03 ! SC 1.03 WF 0.89 ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.01 ON 1.02 WF 0.90 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.03 HN 1.04 KP 0.99 LA 1.00 ! MA 1.04 MK 1.04 NY 1.00 ON 1.03 ! PT 1.01 WF 0.89 WZ 1.08 ! ! A total of 21 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.03 HN 0.93 MA 0.98 NY 0.99 ! ON 1.02 SC 0.95 WF 0.91 WZ 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.93 ON 1.01 WF 0.95 WZ 1.05 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.89 MA 0.94 NY 1.03 ON 1.02 ! SC 0.97 WF 1.03 WZ 1.01 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.09 NY 1.00* ON 0.97 WF 1.07 ! WZ 0.97 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.94 LA 1.01 MK 0.97 ! NL 0.99 NY 1.00* SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.94 MA 1.11 MK 1.04 NY 1.00* ! ON 1.01 SC 1.00 WF 0.98 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 0.93 KP 1.00 LA 0.99 ! MK 0.90 NL 1.00 NY 1.00* PT 1.02 ! SC 1.01 WF 0.87 ! ! A total of 24 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! FD 1.00 HN 0.96 KP 0.98 LA 1.01 ! MA 1.12 MK 1.01 NY 1.00* ON 1.03 ! PT 1.00 WF 0.86 WZ 1.10 ! ! A total of 21 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00 HN 0.94 MA 1.02 NY 1.00* ! ON 1.00 SC 0.95 WF 0.88 WZ 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.99 ON 1.02 WF 0.95 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! HN 0.90 MA 0.97 NY 1.00* ON 0.99 ! SC 0.97 WF 1.05 WZ 1.04 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.10 NY 1.00* ON 1.02 WF 1.03 ! WZ 0.95 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.97 LA 0.99 MK 0.97 ! NL 1.00 NY 1.00* SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.94 MA 1.17 MK 1.03 NY 1.00* ! ON 1.05 SC 1.01 WF 0.98 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 0.92 KP 1.00 LA 1.00 ! MK 0.92 NL 1.01 NY 1.00* PT 1.02 ! SC 0.98 WF 0.86 ! ! A total of 24 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! FD 1.00 HN 0.95 KP 0.96 LA 1.01 ! MA 1.20 MK 1.03 NY 1.00* ON 1.07 ! PT 0.98 WF 0.87 WZ 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 0.99 HN 0.93 MA 1.05 NY 1.00* ! ON 1.01 SC 0.94 WF 0.89 WZ 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 1.07 ON 1.09 WF 0.95 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! HN 0.89 MA 1.05 NY 1.00* ON 1.04 ! SC 0.96 WF 1.07 WZ 0.99 ! ! ! Fit before self-cal, rms=0.330061Jy sigma=2.692052 ! Fit after self-cal, rms=0.268647Jy sigma=1.961354 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6723 mas, bmaj=0.8616 mas, bpa=5.546 degrees ! Estimated noise=0.972767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040895 Jy ! Component: 100 - total flux cleaned = 0.0660947 Jy ! Component: 150 - total flux cleaned = 0.0856193 Jy ! Component: 200 - total flux cleaned = 0.0976762 Jy ! Total flux subtracted in 200 components = 0.0976762 Jy ! Clean residual min=-0.018467 max=0.026935 Jy/beam ! Clean residual mean=0.001330 rms=0.004348 Jy/beam ! Combined flux in latest and established models = 2.82177 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 2.82177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259580Jy sigma=1.896234 ! Fit after self-cal, rms=0.258805Jy sigma=1.888999 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-6.8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025168 Jy ! Component: 100 - total flux cleaned = 0.0392805 Jy ! Component: 150 - total flux cleaned = 0.0481331 Jy ! Component: 200 - total flux cleaned = 0.0562226 Jy ! Total flux subtracted in 200 components = 0.0562226 Jy ! Clean residual min=-0.017388 max=0.020874 Jy/beam ! Clean residual mean=0.000969 rms=0.004095 Jy/beam ! Combined flux in latest and established models = 2.87799 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 90 components and 2.87799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254935Jy sigma=1.861729 ! Fit after self-cal, rms=0.254588Jy sigma=1.858821 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254588Jy sigma=1.858821 ! Fit after self-cal, rms=0.223396Jy sigma=1.578081 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6712 mas, bmaj=0.8609 mas, bpa=6.101 degrees ! Estimated noise=0.974119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137897 Jy ! Component: 100 - total flux cleaned = 0.0239145 Jy ! Component: 150 - total flux cleaned = 0.0295298 Jy ! Component: 200 - total flux cleaned = 0.0323985 Jy ! Total flux subtracted in 200 components = 0.0323985 Jy ! Clean residual min=-0.008564 max=0.012219 Jy/beam ! Clean residual mean=0.000966 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 2.91039 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 2.91039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221933Jy sigma=1.566792 ! Fit after self-cal, rms=0.221883Jy sigma=1.565598 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111403 Jy ! Component: 100 - total flux cleaned = 0.014597 Jy ! Component: 150 - total flux cleaned = 0.0161681 Jy ! Component: 200 - total flux cleaned = 0.0175718 Jy ! Total flux subtracted in 200 components = 0.0175718 Jy ! Clean residual min=-0.008090 max=0.011684 Jy/beam ! Clean residual mean=0.000852 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 2.92796 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 2.92796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220867Jy sigma=1.557441 ! Fit after self-cal, rms=0.220740Jy sigma=1.556561 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (0, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101698 Jy ! Component: 100 - total flux cleaned = 0.013255 Jy ! Component: 150 - total flux cleaned = 0.0149217 Jy ! Component: 200 - total flux cleaned = 0.015561 Jy ! Total flux subtracted in 200 components = 0.015561 Jy ! Clean residual min=-0.007842 max=0.010095 Jy/beam ! Clean residual mean=0.000748 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 2.94352 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 2.94353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219935Jy sigma=1.548620 ! Fit after self-cal, rms=0.219804Jy sigma=1.547958 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-6.8, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103409 Jy ! Component: 100 - total flux cleaned = 0.0146347 Jy ! Component: 150 - total flux cleaned = 0.0162618 Jy ! Component: 200 - total flux cleaned = 0.0168066 Jy ! Total flux subtracted in 200 components = 0.0168066 Jy ! Clean residual min=-0.007931 max=0.008932 Jy/beam ! Clean residual mean=0.000640 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 2.96033 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 144 components and 2.96033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219107Jy sigma=1.542098 ! Fit after self-cal, rms=0.219044Jy sigma=1.541622 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-8.4, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897116 Jy ! Component: 100 - total flux cleaned = 0.0143985 Jy ! Component: 150 - total flux cleaned = 0.0164796 Jy ! Component: 200 - total flux cleaned = 0.0178777 Jy ! Total flux subtracted in 200 components = 0.0178777 Jy ! Clean residual min=-0.008129 max=0.008613 Jy/beam ! Clean residual mean=0.000531 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 2.97821 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 2.97821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218492Jy sigma=1.536909 ! Fit after self-cal, rms=0.218436Jy sigma=1.536566 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-24.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806625 Jy ! Component: 100 - total flux cleaned = 0.011487 Jy ! Component: 150 - total flux cleaned = 0.0137797 Jy ! Component: 200 - total flux cleaned = 0.0150944 Jy ! Total flux subtracted in 200 components = 0.0150944 Jy ! Clean residual min=-0.007846 max=0.008306 Jy/beam ! Clean residual mean=0.000445 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 2.9933 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 169 components and 2.9933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218012Jy sigma=1.532361 ! Fit after self-cal, rms=0.217972Jy sigma=1.532069 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-39.4, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075625 Jy ! Component: 100 - total flux cleaned = 0.010955 Jy ! Component: 150 - total flux cleaned = 0.0132927 Jy ! Component: 200 - total flux cleaned = 0.0145378 Jy ! Total flux subtracted in 200 components = 0.0145378 Jy ! Clean residual min=-0.007903 max=0.008095 Jy/beam ! Clean residual mean=0.000377 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 3.00784 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 181 components and 3.00784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217532Jy sigma=1.528841 ! Fit after self-cal, rms=0.217511Jy sigma=1.528581 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (24.6, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720314 Jy ! Component: 100 - total flux cleaned = 0.0102577 Jy ! Component: 150 - total flux cleaned = 0.0110275 Jy ! Component: 200 - total flux cleaned = 0.0123238 Jy ! Total flux subtracted in 200 components = 0.0123238 Jy ! Clean residual min=-0.007578 max=0.007711 Jy/beam ! Clean residual mean=0.000313 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 3.02017 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 191 components and 3.02017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217156Jy sigma=1.525547 ! Fit after self-cal, rms=0.217126Jy sigma=1.525320 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-36.2, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066755 Jy ! Component: 100 - total flux cleaned = 0.00862921 Jy ! Component: 150 - total flux cleaned = 0.00950949 Jy ! Component: 200 - total flux cleaned = 0.0100624 Jy ! Total flux subtracted in 200 components = 0.0100624 Jy ! Clean residual min=-0.007442 max=0.007212 Jy/beam ! Clean residual mean=0.000276 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 3.03023 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 208 components and 3.03023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216821Jy sigma=1.522606 ! Fit after self-cal, rms=0.216810Jy sigma=1.522402 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216810Jy sigma=1.522402 ! Fit after self-cal, rms=0.215671Jy sigma=1.508301 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6705 mas, bmaj=0.8608 mas, bpa=6.221 degrees ! Estimated noise=0.974779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554015 Jy ! Component: 100 - total flux cleaned = 0.00910357 Jy ! Component: 150 - total flux cleaned = 0.0119552 Jy ! Component: 200 - total flux cleaned = 0.0145754 Jy ! Total flux subtracted in 200 components = 0.0145754 Jy ! Clean residual min=-0.006185 max=0.007318 Jy/beam ! Clean residual mean=0.000311 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 3.0448 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 220 components and 3.0448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215319Jy sigma=1.505061 ! Fit after self-cal, rms=0.215290Jy sigma=1.504941 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.4, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541996 Jy ! Component: 100 - total flux cleaned = 0.00849761 Jy ! Component: 150 - total flux cleaned = 0.0102807 Jy ! Component: 200 - total flux cleaned = 0.0118295 Jy ! Total flux subtracted in 200 components = 0.0118295 Jy ! Clean residual min=-0.006118 max=0.006774 Jy/beam ! Clean residual mean=0.000257 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 3.05663 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 227 components and 3.05663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214995Jy sigma=1.502368 ! Fit after self-cal, rms=0.214986Jy sigma=1.502225 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (19.8, -31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610484 Jy ! Component: 100 - total flux cleaned = 0.0076145 Jy ! Component: 150 - total flux cleaned = 0.00913265 Jy ! Component: 200 - total flux cleaned = 0.0104403 Jy ! Total flux subtracted in 200 components = 0.0104403 Jy ! Clean residual min=-0.005992 max=0.006491 Jy/beam ! Clean residual mean=0.000213 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 3.06707 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 241 components and 3.06707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214722Jy sigma=1.499911 ! Fit after self-cal, rms=0.214714Jy sigma=1.499754 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (10.6, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555019 Jy ! Component: 100 - total flux cleaned = 0.00643328 Jy ! Component: 150 - total flux cleaned = 0.00750666 Jy ! Component: 200 - total flux cleaned = 0.00814395 Jy ! Total flux subtracted in 200 components = 0.00814395 Jy ! Clean residual min=-0.005975 max=0.006286 Jy/beam ! Clean residual mean=0.000165 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 3.07522 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 255 components and 3.07522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214480Jy sigma=1.497539 ! Fit after self-cal, rms=0.214468Jy sigma=1.497388 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (16.6, -34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253016 Jy ! Component: 100 - total flux cleaned = 0.00251449 Jy ! Component: 150 - total flux cleaned = 0.00317758 Jy ! Component: 200 - total flux cleaned = 0.00380495 Jy ! Total flux subtracted in 200 components = 0.00380495 Jy ! Clean residual min=-0.005967 max=0.005989 Jy/beam ! Clean residual mean=0.000146 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 3.07902 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 269 components and 3.07902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214207Jy sigma=1.495519 ! Fit after self-cal, rms=0.214196Jy sigma=1.495374 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214196Jy sigma=1.495374 ! Fit after self-cal, rms=0.214289Jy sigma=1.493682 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=2.243 mas, bmaj=2.597 mas, bpa=67.11 degrees ! Estimated noise=1.61501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668748 Jy ! Component: 100 - total flux cleaned = 0.0108919 Jy ! Component: 150 - total flux cleaned = 0.0136892 Jy ! Component: 200 - total flux cleaned = 0.015775 Jy ! Total flux subtracted in 200 components = 0.015775 Jy ! Clean residual min=-0.006811 max=0.007476 Jy/beam ! Clean residual mean=0.000412 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 3.0948 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 291 components and 3.0948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214228Jy sigma=1.493637 ! Fit after self-cal, rms=0.214200Jy sigma=1.493477 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319805 Jy ! Component: 100 - total flux cleaned = 0.0047313 Jy ! Component: 150 - total flux cleaned = 0.00563153 Jy ! Component: 200 - total flux cleaned = 0.00628579 Jy ! Total flux subtracted in 200 components = 0.00628579 Jy ! Clean residual min=-0.006852 max=0.007319 Jy/beam ! Clean residual mean=0.000283 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 3.10108 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 303 components and 3.10108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214176Jy sigma=1.493520 ! Fit after self-cal, rms=0.214169Jy sigma=1.493492 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6702 mas, bmaj=0.861 mas, bpa=6.278 degrees ! Estimated noise=0.975575 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6702 x 0.861 at 6.278 degrees (North through East) ! Clean map min=-0.0051053 max=2.1188 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214169Jy sigma=1.493492 ! Fit after self-cal, rms=0.195363Jy sigma=1.295236 ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6704 mas, bmaj=0.8609 mas, bpa=6.252 degrees ! Estimated noise=0.975862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153979 Jy ! Component: 100 - total flux cleaned = 0.00184069 Jy ! Component: 150 - total flux cleaned = 0.00225122 Jy ! Component: 200 - total flux cleaned = 0.00238098 Jy ! Total flux subtracted in 200 components = 0.00238098 Jy ! Clean residual min=-0.005930 max=0.005553 Jy/beam ! Clean residual mean=0.000106 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 3.10346 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 309 components and 3.10346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195179Jy sigma=1.293189 ! Fit after self-cal, rms=0.195178Jy sigma=1.293156 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778799 Jy ! Component: 100 - total flux cleaned = 0.00089711 Jy ! Component: 150 - total flux cleaned = 0.001016 Jy ! Component: 200 - total flux cleaned = 0.00124339 Jy ! Total flux subtracted in 200 components = 0.00124339 Jy ! Clean residual min=-0.005842 max=0.005495 Jy/beam ! Clean residual mean=0.000101 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 3.10471 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 316 components and 3.10471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195051Jy sigma=1.291776 ! Fit after self-cal, rms=0.195050Jy sigma=1.291759 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195050Jy sigma=1.291759 ! Fit after self-cal, rms=0.195211Jy sigma=1.291518 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.5673 mas, bmaj=0.7483 mas, bpa=8.737 degrees ! Estimated noise=1.26868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60452 Jy ! Component: 100 - total flux cleaned = 2.01113 Jy ! Component: 150 - total flux cleaned = 2.20948 Jy ! Component: 200 - total flux cleaned = 2.33726 Jy ! Total flux subtracted in 200 components = 2.33726 Jy ! Clean residual min=-0.021135 max=0.068977 Jy/beam ! Clean residual mean=0.000709 rms=0.005308 Jy/beam ! Combined flux in latest and established models = 2.33726 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.33726 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6703 mas, bmaj=0.8611 mas, bpa=6.282 degrees ! Estimated noise=0.976303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118002 Jy ! Component: 100 - total flux cleaned = 0.198439 Jy ! Component: 150 - total flux cleaned = 0.261593 Jy ! Component: 200 - total flux cleaned = 0.312816 Jy ! Total flux subtracted in 200 components = 0.312816 Jy ! Clean residual min=-0.011313 max=0.031246 Jy/beam ! Clean residual mean=0.002879 rms=0.004143 Jy/beam ! Combined flux in latest and established models = 2.65007 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 62 components and 2.65007 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-5.8, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424786 Jy ! Component: 100 - total flux cleaned = 0.0783174 Jy ! Component: 150 - total flux cleaned = 0.108977 Jy ! Component: 200 - total flux cleaned = 0.135443 Jy ! Total flux subtracted in 200 components = 0.135443 Jy ! Clean residual min=-0.008647 max=0.017489 Jy/beam ! Clean residual mean=0.002001 rms=0.002812 Jy/beam ! Combined flux in latest and established models = 2.78552 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 108 components and 2.78552 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-3.8, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023246 Jy ! Component: 100 - total flux cleaned = 0.0437112 Jy ! Component: 150 - total flux cleaned = 0.0620764 Jy ! Component: 200 - total flux cleaned = 0.0786988 Jy ! Total flux subtracted in 200 components = 0.0786988 Jy ! Clean residual min=-0.007237 max=0.012633 Jy/beam ! Clean residual mean=0.001500 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 2.86421 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 148 components and 2.86421 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-4, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155123 Jy ! Component: 100 - total flux cleaned = 0.0296412 Jy ! Component: 150 - total flux cleaned = 0.0427587 Jy ! Component: 200 - total flux cleaned = 0.0549718 Jy ! Total flux subtracted in 200 components = 0.0549718 Jy ! Clean residual min=-0.006493 max=0.009827 Jy/beam ! Clean residual mean=0.001172 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 2.91919 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 182 components and 2.91919 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (-7.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119181 Jy ! Component: 100 - total flux cleaned = 0.0227012 Jy ! Component: 150 - total flux cleaned = 0.032827 Jy ! Component: 200 - total flux cleaned = 0.042352 Jy ! Total flux subtracted in 200 components = 0.042352 Jy ! Clean residual min=-0.005973 max=0.008314 Jy/beam ! Clean residual mean=0.000925 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 2.96154 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 206 components and 2.96154 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (23, -24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940619 Jy ! Component: 100 - total flux cleaned = 0.017932 Jy ! Component: 150 - total flux cleaned = 0.0259965 Jy ! Component: 200 - total flux cleaned = 0.0336303 Jy ! Total flux subtracted in 200 components = 0.0336303 Jy ! Clean residual min=-0.005636 max=0.007153 Jy/beam ! Clean residual mean=0.000736 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 2.99517 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 227 components and 2.99517 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (26.2, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774386 Jy ! Component: 100 - total flux cleaned = 0.0146751 Jy ! Component: 150 - total flux cleaned = 0.0212605 Jy ! Component: 200 - total flux cleaned = 0.0275272 Jy ! Total flux subtracted in 200 components = 0.0275272 Jy ! Clean residual min=-0.005410 max=0.006503 Jy/beam ! Clean residual mean=0.000584 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 3.0227 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 254 components and 3.0227 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (11, -26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661739 Jy ! Component: 100 - total flux cleaned = 0.0123693 Jy ! Component: 150 - total flux cleaned = 0.0178459 Jy ! Component: 200 - total flux cleaned = 0.0230693 Jy ! Total flux subtracted in 200 components = 0.0230693 Jy ! Clean residual min=-0.005204 max=0.006063 Jy/beam ! Clean residual mean=0.000459 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 3.04577 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 273 components and 3.04577 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Added new window around map position (13.6, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005818 Jy ! Component: 100 - total flux cleaned = 0.0100938 Jy ! Component: 150 - total flux cleaned = 0.0139991 Jy ! Component: 200 - total flux cleaned = 0.0177449 Jy ! Total flux subtracted in 200 components = 0.0177449 Jy ! Clean residual min=-0.005139 max=0.005696 Jy/beam ! Clean residual mean=0.000358 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 3.06351 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 284 components and 3.06351 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=2.244 mas, bmaj=2.597 mas, bpa=67.06 degrees ! Estimated noise=1.61575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104938 Jy ! Component: 100 - total flux cleaned = 0.0184497 Jy ! Component: 150 - total flux cleaned = 0.0250243 Jy ! Component: 200 - total flux cleaned = 0.0306008 Jy ! Total flux subtracted in 200 components = 0.0306008 Jy ! Clean residual min=-0.006484 max=0.008127 Jy/beam ! Clean residual mean=0.000647 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 3.09411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480695 Jy ! Component: 100 - total flux cleaned = 0.00900701 Jy ! Component: 150 - total flux cleaned = 0.0126955 Jy ! Component: 200 - total flux cleaned = 0.0151915 Jy ! Total flux subtracted in 200 components = 0.0151915 Jy ! Clean residual min=-0.006199 max=0.007483 Jy/beam ! Clean residual mean=0.000349 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 3.1093 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 352 components and 3.1093 Jy ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! Estimated beam: bmin=0.6703 mas, bmaj=0.8611 mas, bpa=6.282 degrees ! Estimated noise=0.976303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492324 Jy ! Component: 100 - total flux cleaned = -0.000908783 Jy ! Component: 150 - total flux cleaned = -0.000636209 Jy ! Component: 200 - total flux cleaned = -0.00038355 Jy ! Total flux subtracted in 200 components = -0.00038355 Jy ! Clean residual min=-0.005334 max=0.005735 Jy/beam ! Clean residual mean=0.000101 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 3.10892 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 376 components and 3.10892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194694Jy sigma=1.285897 ! Fit after self-cal, rms=0.194444Jy sigma=1.283661 wmodel J2038+5119_X_map.mod ! Writing 376 model components to file: J2038+5119_X_map.mod wobs J2038+5119_X_uvs.fits ! Writing UV FITS file: J2038+5119_X_uvs.fits wwins J2038+5119_X_map.win ! wwins: Wrote 25 windows to J2038+5119_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307817 Jy ! Component: 100 - total flux cleaned = 0.000307573 Jy ! Component: 150 - total flux cleaned = 0.000126141 Jy ! Component: 200 - total flux cleaned = 0.000125603 Jy ! Component: 250 - total flux cleaned = -5.13108e-05 Jy ! Component: 300 - total flux cleaned = -5.11058e-05 Jy ! Component: 350 - total flux cleaned = 0.00011934 Jy ! Component: 400 - total flux cleaned = 0.000288 Jy ! Component: 450 - total flux cleaned = 0.000787192 Jy ! Component: 500 - total flux cleaned = 0.00111585 Jy ! Component: 550 - total flux cleaned = 0.00144093 Jy ! Component: 600 - total flux cleaned = 0.00160108 Jy ! Component: 650 - total flux cleaned = 0.00192082 Jy ! Component: 700 - total flux cleaned = 0.00223713 Jy ! Component: 750 - total flux cleaned = 0.00255028 Jy ! Component: 800 - total flux cleaned = 0.00309411 Jy ! Component: 850 - total flux cleaned = 0.00324839 Jy ! Component: 900 - total flux cleaned = 0.00363063 Jy ! Component: 950 - total flux cleaned = 0.00408583 Jy ! Component: 1000 - total flux cleaned = 0.00461135 Jy ! Component: 1050 - total flux cleaned = 0.00476069 Jy ! Component: 1100 - total flux cleaned = 0.00527928 Jy ! Component: 1150 - total flux cleaned = 0.00593974 Jy ! Component: 1200 - total flux cleaned = 0.00637603 Jy ! Component: 1250 - total flux cleaned = 0.00666493 Jy ! Component: 1300 - total flux cleaned = 0.00716842 Jy ! Component: 1350 - total flux cleaned = 0.00752492 Jy ! Component: 1400 - total flux cleaned = 0.00809155 Jy ! Component: 1450 - total flux cleaned = 0.00844369 Jy ! Component: 1500 - total flux cleaned = 0.00872312 Jy ! Component: 1550 - total flux cleaned = 0.00920978 Jy ! Component: 1600 - total flux cleaned = 0.00955433 Jy ! Component: 1650 - total flux cleaned = 0.00989794 Jy ! Component: 1700 - total flux cleaned = 0.0100338 Jy ! Component: 1750 - total flux cleaned = 0.0105086 Jy ! Component: 1800 - total flux cleaned = 0.0107107 Jy ! Component: 1850 - total flux cleaned = 0.0109116 Jy ! Component: 1900 - total flux cleaned = 0.0111786 Jy ! Component: 1950 - total flux cleaned = 0.011444 Jy ! Component: 2000 - total flux cleaned = 0.0117079 Jy ! Component: 2050 - total flux cleaned = 0.0119043 Jy ! Component: 2100 - total flux cleaned = 0.0123608 Jy ! Component: 2150 - total flux cleaned = 0.0123605 Jy ! Component: 2200 - total flux cleaned = 0.0124898 Jy ! Component: 2250 - total flux cleaned = 0.012811 Jy ! Component: 2300 - total flux cleaned = 0.0130024 Jy ! Component: 2350 - total flux cleaned = 0.0133843 Jy ! Component: 2400 - total flux cleaned = 0.0133838 Jy ! Component: 2450 - total flux cleaned = 0.0136354 Jy ! Component: 2500 - total flux cleaned = 0.0136354 Jy ! Component: 2550 - total flux cleaned = 0.014072 Jy ! Component: 2600 - total flux cleaned = 0.0140715 Jy ! Component: 2650 - total flux cleaned = 0.0139481 Jy ! Component: 2700 - total flux cleaned = 0.0143785 Jy ! Component: 2750 - total flux cleaned = 0.0145011 Jy ! Component: 2800 - total flux cleaned = 0.0145622 Jy ! Component: 2850 - total flux cleaned = 0.0146835 Jy ! Component: 2900 - total flux cleaned = 0.0148048 Jy ! Component: 2950 - total flux cleaned = 0.0151055 Jy ! Component: 3000 - total flux cleaned = 0.0149853 Jy ! Component: 3050 - total flux cleaned = 0.0149853 Jy ! Component: 3100 - total flux cleaned = 0.0152822 Jy ! Component: 3150 - total flux cleaned = 0.0154595 Jy ! Component: 3200 - total flux cleaned = 0.0154595 Jy ! Component: 3250 - total flux cleaned = 0.0156356 Jy ! Component: 3300 - total flux cleaned = 0.0157523 Jy ! Component: 3350 - total flux cleaned = 0.0159269 Jy ! Component: 3400 - total flux cleaned = 0.0159268 Jy ! Component: 3450 - total flux cleaned = 0.0161 Jy ! Component: 3500 - total flux cleaned = 0.0162148 Jy ! Component: 3550 - total flux cleaned = 0.0162724 Jy ! Component: 3600 - total flux cleaned = 0.0165004 Jy ! Component: 3650 - total flux cleaned = 0.0166138 Jy ! Component: 3700 - total flux cleaned = 0.0165571 Jy ! Component: 3750 - total flux cleaned = 0.0168947 Jy ! Component: 3800 - total flux cleaned = 0.0167264 Jy ! Component: 3850 - total flux cleaned = 0.0170057 Jy ! Component: 3900 - total flux cleaned = 0.017117 Jy ! Component: 3950 - total flux cleaned = 0.0171723 Jy ! Component: 4000 - total flux cleaned = 0.0173929 Jy ! Component: 4050 - total flux cleaned = 0.0174477 Jy ! Total flux subtracted in 4096 components = 0.0174475 Jy ! Clean residual min=-0.002915 max=0.002956 Jy/beam ! Clean residual mean=0.000059 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 3.12637 Jy keep ! Adding 382 model components to the UV plane model. ! The established model now contains 758 components and 3.12636 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2038+5119_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6703 x 0.8611 at 6.282 degrees (North through East) ! Clean map min=-0.0040681 max=2.1202 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2038+5119_X_map.fits wmodel /scr/pima/rv102_uvs/J2038+5119_X_map.mod ! Writing 758 model components to file: /scr/pima/rv102_uvs/J2038+5119_X_map.mod wobs /scr/pima/rv102_uvs/J2038+5119_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2038+5119_X_uvs.fits wwins /scr/pima/rv102_uvs/J2038+5119_X_map.win ! wwins: Wrote 26 windows to /scr/pima/rv102_uvs/J2038+5119_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.12019 invert ! Inverting map ! Your choice of large map pixels excluded 0.78% of the data. ! The x-axis pixel size should ideally be below 0.1919 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000895585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.126722 0.126722 0.253445 0.506889 1.01378 2.02756 4.05511 8.11023 16.2205 32.4409 64.8818 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.12 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2367.38 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2038+5119_X_dfm.log closed on Sat Nov 9 10:21:55 2019