! Started logfile: /scr/pima/rv102_uvs/J2038+5119_S_uvs.log on Sat Feb 27 22:27:11 2016 obs /scr/pima/rv102_uvs/J2038+5119_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2038+5119_S_uva.fits ! AN table 1: 21 integrations on 10 of 10 possible baselines. ! AN table 2: 21 integrations on 6 of 6 possible baselines. ! AN table 3: 2 integrations on 21 of 21 possible baselines. ! AN table 4: 3 integrations on 36 of 36 possible baselines. ! AN table 5: 6 integrations on 3 of 3 possible baselines. ! AN table 6: 3 integrations on 1 of 1 possible baselines. ! AN table 7: 2 integrations on 55 of 55 possible baselines. ! AN table 8: 3 integrations on 6 of 6 possible baselines. ! AN table 9: 2 integrations on 3 of 3 possible baselines. ! AN table 10: 4 integrations on 66 of 66 possible baselines. ! AN table 11: 3 integrations on 3 of 3 possible baselines. ! AN table 12: 3 integrations on 3 of 3 possible baselines. ! AN table 13: 3 integrations on 28 of 28 possible baselines. ! AN table 14: 3 integrations on 6 of 6 possible baselines. ! AN table 15: 2 integrations on 3 of 3 possible baselines. ! AN table 16: 3 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.796161 visibilities/baseline/integration-bin. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 3484 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J2038+5119_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 12 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 12 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 12 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 12 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=1.855629Jy sigma=6.332780 ! Fit after self-cal, rms=1.148584Jy sigma=3.662208 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=2.971 mas, bpa=32.92 degrees ! Estimated noise=4.76136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.536092 Jy ! Component: 100 - total flux cleaned = 0.690844 Jy ! Total flux subtracted in 100 components = 0.690844 Jy ! Clean residual min=-0.089024 max=0.147283 Jy/beam ! Clean residual mean=0.001345 rms=0.022674 Jy/beam ! Combined flux in latest and established models = 0.690844 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.690844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.218388Jy sigma=3.046190 ! Fit after self-cal, rms=1.218027Jy sigma=3.039495 ! Inverting map ! Added new window around map position (-3.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141378 Jy ! Component: 100 - total flux cleaned = 0.235342 Jy ! Total flux subtracted in 100 components = 0.235342 Jy ! Clean residual min=-0.085996 max=0.100632 Jy/beam ! Clean residual mean=0.001084 rms=0.022211 Jy/beam ! Combined flux in latest and established models = 0.926186 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.926186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.145670Jy sigma=2.996559 ! Fit after self-cal, rms=1.144107Jy sigma=2.987560 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=3.232 mas, bpa=32.09 degrees ! Estimated noise=4.09676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14585 Jy ! Component: 100 - total flux cleaned = 0.242594 Jy ! Component: 150 - total flux cleaned = 0.31356 Jy ! Component: 200 - total flux cleaned = 0.366135 Jy ! Total flux subtracted in 200 components = 0.366135 Jy ! Clean residual min=-0.098928 max=0.135039 Jy/beam ! Clean residual mean=0.004825 rms=0.031406 Jy/beam ! Combined flux in latest and established models = 1.29232 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 56 components and 1.29232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.053989Jy sigma=3.103227 ! Fit after self-cal, rms=1.052262Jy sigma=3.095152 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 3.232 at 32.09 degrees (North through East) ! Clean map min=-0.096279 max=0.72296 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* MA 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* MA 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* MA 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* MA 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=1.052262Jy sigma=3.095152 ! Fit after self-cal, rms=0.910441Jy sigma=3.190048 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570446 Jy ! Component: 100 - total flux cleaned = -0.000418259 Jy ! Component: 150 - total flux cleaned = -0.00117983 Jy ! Component: 200 - total flux cleaned = -0.00116732 Jy ! Total flux subtracted in 200 components = -0.00116732 Jy ! Clean residual min=-0.104109 max=0.142812 Jy/beam ! Clean residual mean=0.005303 rms=0.033164 Jy/beam ! Combined flux in latest and established models = 1.29115 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 1.29115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.910471Jy sigma=3.166171 ! Fit after self-cal, rms=0.910689Jy sigma=3.165251 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.910689Jy sigma=3.165251 ! Fit after self-cal, rms=0.910689Jy sigma=3.165251 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218308 Jy ! Component: 100 - total flux cleaned = 0.00371564 Jy ! Component: 150 - total flux cleaned = 0.00455012 Jy ! Component: 200 - total flux cleaned = 0.00492395 Jy ! Total flux subtracted in 200 components = 0.00492395 Jy ! Clean residual min=-0.103189 max=0.144022 Jy/beam ! Clean residual mean=0.005230 rms=0.033104 Jy/beam ! Combined flux in latest and established models = 1.29608 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 1.29608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.909679Jy sigma=3.161547 ! Fit after self-cal, rms=0.909839Jy sigma=3.161272 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148128 Jy ! Component: 100 - total flux cleaned = 0.236562 Jy ! Component: 150 - total flux cleaned = 0.297615 Jy ! Component: 200 - total flux cleaned = 0.331698 Jy ! Total flux subtracted in 200 components = 0.331698 Jy ! Clean residual min=-0.092036 max=0.133788 Jy/beam ! Clean residual mean=-0.000154 rms=0.030280 Jy/beam ! Combined flux in latest and established models = 1.62778 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 110 components and 1.62778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.876768Jy sigma=2.898273 ! Fit after self-cal, rms=0.872533Jy sigma=2.866949 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.872533Jy sigma=2.866949 ! Fit after self-cal, rms=0.872533Jy sigma=2.866949 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670308 Jy ! Component: 100 - total flux cleaned = 0.103842 Jy ! Component: 150 - total flux cleaned = 0.114812 Jy ! Component: 200 - total flux cleaned = 0.118249 Jy ! Total flux subtracted in 200 components = 0.118249 Jy ! Clean residual min=-0.092218 max=0.121227 Jy/beam ! Clean residual mean=-0.002117 rms=0.029153 Jy/beam ! Combined flux in latest and established models = 1.74603 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 127 components and 1.74603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.864052Jy sigma=2.794459 ! Fit after self-cal, rms=0.863827Jy sigma=2.787058 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270292 Jy ! Component: 100 - total flux cleaned = 0.02953 Jy ! Component: 150 - total flux cleaned = 0.0316375 Jy ! Component: 200 - total flux cleaned = 0.0361975 Jy ! Total flux subtracted in 200 components = 0.0361975 Jy ! Clean residual min=-0.095167 max=0.114630 Jy/beam ! Clean residual mean=-0.002735 rms=0.028530 Jy/beam ! Combined flux in latest and established models = 1.78222 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 136 components and 1.78222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862833Jy sigma=2.742383 ! Fit after self-cal, rms=0.863034Jy sigma=2.739836 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.863034Jy sigma=2.739836 ! Fit after self-cal, rms=0.863034Jy sigma=2.739836 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=9.88 mas, bpa=-80.21 degrees ! Estimated noise=6.62906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784904 Jy ! Component: 100 - total flux cleaned = 0.096785 Jy ! Component: 150 - total flux cleaned = 0.109205 Jy ! Component: 200 - total flux cleaned = 0.111492 Jy ! Total flux subtracted in 200 components = 0.111492 Jy ! Clean residual min=-0.224957 max=0.258216 Jy/beam ! Clean residual mean=-0.016019 rms=0.079096 Jy/beam ! Combined flux in latest and established models = 1.89371 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 1.89371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.859516Jy sigma=2.765272 ! Fit after self-cal, rms=0.857815Jy sigma=2.757953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897777 Jy ! Component: 100 - total flux cleaned = 0.0147363 Jy ! Component: 150 - total flux cleaned = 0.0147788 Jy ! Component: 200 - total flux cleaned = 0.0139586 Jy ! Total flux subtracted in 200 components = 0.0139586 Jy ! Clean residual min=-0.229731 max=0.255692 Jy/beam ! Clean residual mean=-0.016876 rms=0.078220 Jy/beam ! Combined flux in latest and established models = 1.90767 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 144 components and 1.90767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.861338Jy sigma=2.773415 ! Fit after self-cal, rms=0.861136Jy sigma=2.771926 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.713 x 3.13 at 34.38 degrees (North through East) ! Clean map min=-0.10204 max=0.64014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.861136Jy sigma=2.771926 ! Fit after self-cal, rms=0.861136Jy sigma=2.771926 ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0484361 Jy ! Component: 100 - total flux cleaned = -0.0515209 Jy ! Component: 150 - total flux cleaned = -0.0565324 Jy ! Component: 200 - total flux cleaned = -0.0575924 Jy ! Total flux subtracted in 200 components = -0.0575924 Jy ! Clean residual min=-0.101927 max=0.106359 Jy/beam ! Clean residual mean=-0.003886 rms=0.027934 Jy/beam ! Combined flux in latest and established models = 1.85008 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 152 components and 1.85008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.863380Jy sigma=2.710754 ! Fit after self-cal, rms=0.862915Jy sigma=2.708733 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00573482 Jy ! Component: 100 - total flux cleaned = -0.00567257 Jy ! Component: 150 - total flux cleaned = -0.00733042 Jy ! Component: 200 - total flux cleaned = -0.00806434 Jy ! Total flux subtracted in 200 components = -0.00806434 Jy ! Clean residual min=-0.101367 max=0.105470 Jy/beam ! Clean residual mean=-0.003765 rms=0.027738 Jy/beam ! Combined flux in latest and established models = 1.84202 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 1.84202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862863Jy sigma=2.688929 ! Fit after self-cal, rms=0.862897Jy sigma=2.688188 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862897Jy sigma=2.688188 ! Fit after self-cal, rms=0.862897Jy sigma=2.688188 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=2.871 mas, bpa=34.47 degrees ! Estimated noise=4.9226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.480916 Jy ! Component: 100 - total flux cleaned = 0.678167 Jy ! Component: 150 - total flux cleaned = 0.827812 Jy ! Component: 200 - total flux cleaned = 0.950764 Jy ! Total flux subtracted in 200 components = 0.950764 Jy ! Clean residual min=-0.078356 max=0.121979 Jy/beam ! Clean residual mean=0.001037 rms=0.020404 Jy/beam ! Combined flux in latest and established models = 0.950764 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.950764 Jy ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180149 Jy ! Component: 100 - total flux cleaned = 0.316286 Jy ! Component: 150 - total flux cleaned = 0.4269 Jy ! Component: 200 - total flux cleaned = 0.518007 Jy ! Total flux subtracted in 200 components = 0.518007 Jy ! Clean residual min=-0.090418 max=0.117601 Jy/beam ! Clean residual mean=0.002175 rms=0.026428 Jy/beam ! Combined flux in latest and established models = 1.46877 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 75 components and 1.46877 Jy ! Inverting map ! Added new window around map position (80, 110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111745 Jy ! Component: 100 - total flux cleaned = 0.189879 Jy ! Component: 150 - total flux cleaned = 0.257219 Jy ! Component: 200 - total flux cleaned = 0.316355 Jy ! Total flux subtracted in 200 components = 0.316355 Jy ! Clean residual min=-0.087481 max=0.097990 Jy/beam ! Clean residual mean=-0.001622 rms=0.024774 Jy/beam ! Combined flux in latest and established models = 1.78513 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 118 components and 1.78513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=9.88 mas, bpa=-80.21 degrees ! Estimated noise=6.62906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153232 Jy ! Component: 100 - total flux cleaned = 0.249273 Jy ! Component: 150 - total flux cleaned = 0.31562 Jy ! Component: 200 - total flux cleaned = 0.35594 Jy ! Total flux subtracted in 200 components = 0.35594 Jy ! Clean residual min=-0.218548 max=0.199833 Jy/beam ! Clean residual mean=-0.022502 rms=0.066600 Jy/beam ! Combined flux in latest and established models = 2.14107 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110625 Jy ! Component: 100 - total flux cleaned = 0.0183201 Jy ! Component: 150 - total flux cleaned = 0.0249733 Jy ! Component: 200 - total flux cleaned = 0.0299632 Jy ! Total flux subtracted in 200 components = 0.0299632 Jy ! Clean residual min=-0.220600 max=0.198662 Jy/beam ! Clean residual mean=-0.023914 rms=0.066584 Jy/beam ! Combined flux in latest and established models = 2.17103 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 145 components and 2.17103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.13 mas, bpa=34.38 degrees ! Estimated noise=4.22741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0482212 Jy ! Component: 100 - total flux cleaned = -0.0430983 Jy ! Component: 150 - total flux cleaned = -0.0388572 Jy ! Component: 200 - total flux cleaned = -0.0351249 Jy ! Total flux subtracted in 200 components = -0.0351249 Jy ! Clean residual min=-0.090231 max=0.091444 Jy/beam ! Clean residual mean=-0.006459 rms=0.024498 Jy/beam ! Combined flux in latest and established models = 2.1359 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 164 components and 2.1359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.848249Jy sigma=2.415291 ! Fit after self-cal, rms=0.841913Jy sigma=2.395506 wmodel /scr/pima/rv102_uvs/J2038+5119_S_map.mod ! Writing 164 model components to file: /scr/pima/rv102_uvs/J2038+5119_S_map.mod wobs /scr/pima/rv102_uvs/J2038+5119_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2038+5119_S_uvs.fits wwins /scr/pima/rv102_uvs/J2038+5119_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv102_uvs/J2038+5119_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00527993 Jy ! Component: 100 - total flux cleaned = -0.000693171 Jy ! Component: 150 - total flux cleaned = 0.00367029 Jy ! Component: 200 - total flux cleaned = -0.000555794 Jy ! Component: 250 - total flux cleaned = -0.00461745 Jy ! Component: 300 - total flux cleaned = -0.0112453 Jy ! Component: 350 - total flux cleaned = -0.0190248 Jy ! Component: 400 - total flux cleaned = -0.0303767 Jy ! Component: 450 - total flux cleaned = -0.0365354 Jy ! Component: 500 - total flux cleaned = -0.0438212 Jy ! Component: 550 - total flux cleaned = -0.053339 Jy ! Component: 600 - total flux cleaned = -0.0614962 Jy ! Component: 650 - total flux cleaned = -0.069511 Jy ! Component: 700 - total flux cleaned = -0.0796248 Jy ! Component: 750 - total flux cleaned = -0.0862543 Jy ! Component: 800 - total flux cleaned = -0.094956 Jy ! Component: 850 - total flux cleaned = -0.102437 Jy ! Component: 900 - total flux cleaned = -0.108753 Jy ! Component: 950 - total flux cleaned = -0.116024 Jy ! Component: 1000 - total flux cleaned = -0.124209 Jy ! Component: 1050 - total flux cleaned = -0.131262 Jy ! Component: 1100 - total flux cleaned = -0.138227 Jy ! Component: 1150 - total flux cleaned = -0.144119 Jy ! Component: 1200 - total flux cleaned = -0.15091 Jy ! Component: 1250 - total flux cleaned = -0.157601 Jy ! Component: 1300 - total flux cleaned = -0.162318 Jy ! Component: 1350 - total flux cleaned = -0.16885 Jy ! Component: 1400 - total flux cleaned = -0.173456 Jy ! Component: 1450 - total flux cleaned = -0.179827 Jy ! Component: 1500 - total flux cleaned = -0.18611 Jy ! Component: 1550 - total flux cleaned = -0.191432 Jy ! Component: 1600 - total flux cleaned = -0.19582 Jy ! Component: 1650 - total flux cleaned = -0.202758 Jy ! Component: 1700 - total flux cleaned = -0.20619 Jy ! Component: 1750 - total flux cleaned = -0.209589 Jy ! Component: 1800 - total flux cleaned = -0.214621 Jy ! Component: 1850 - total flux cleaned = -0.217941 Jy ! Component: 1900 - total flux cleaned = -0.220409 Jy ! Component: 1950 - total flux cleaned = -0.223666 Jy ! Component: 2000 - total flux cleaned = -0.226893 Jy ! Component: 2050 - total flux cleaned = -0.232467 Jy ! Component: 2100 - total flux cleaned = -0.234833 Jy ! Component: 2150 - total flux cleaned = -0.239515 Jy ! Component: 2200 - total flux cleaned = -0.240288 Jy ! Component: 2250 - total flux cleaned = -0.244887 Jy ! Component: 2300 - total flux cleaned = -0.247162 Jy ! Component: 2350 - total flux cleaned = -0.250919 Jy ! Component: 2400 - total flux cleaned = -0.253892 Jy ! Component: 2450 - total flux cleaned = -0.255366 Jy ! Component: 2500 - total flux cleaned = -0.258292 Jy ! Component: 2550 - total flux cleaned = -0.26119 Jy ! Component: 2600 - total flux cleaned = -0.263347 Jy ! Component: 2650 - total flux cleaned = -0.26477 Jy ! Component: 2700 - total flux cleaned = -0.267602 Jy ! Component: 2750 - total flux cleaned = -0.269706 Jy ! Component: 2800 - total flux cleaned = -0.271793 Jy ! Component: 2850 - total flux cleaned = -0.274559 Jy ! Component: 2900 - total flux cleaned = -0.276615 Jy ! Component: 2950 - total flux cleaned = -0.277981 Jy ! Component: 3000 - total flux cleaned = -0.279332 Jy ! Component: 3050 - total flux cleaned = -0.282019 Jy ! Component: 3100 - total flux cleaned = -0.28402 Jy ! Component: 3150 - total flux cleaned = -0.285344 Jy ! Component: 3200 - total flux cleaned = -0.287317 Jy ! Component: 3250 - total flux cleaned = -0.28797 Jy ! Component: 3300 - total flux cleaned = -0.289921 Jy ! Component: 3350 - total flux cleaned = -0.291857 Jy ! Component: 3400 - total flux cleaned = -0.292502 Jy ! Component: 3450 - total flux cleaned = -0.293773 Jy ! Component: 3500 - total flux cleaned = -0.295038 Jy ! Component: 3550 - total flux cleaned = -0.296922 Jy ! Component: 3600 - total flux cleaned = -0.29817 Jy ! Component: 3650 - total flux cleaned = -0.299412 Jy ! Component: 3700 - total flux cleaned = -0.300648 Jy ! Component: 3750 - total flux cleaned = -0.301875 Jy ! Component: 3800 - total flux cleaned = -0.304311 Jy ! Component: 3850 - total flux cleaned = -0.304917 Jy ! Component: 3900 - total flux cleaned = -0.307321 Jy ! Component: 3950 - total flux cleaned = -0.307316 Jy ! Component: 4000 - total flux cleaned = -0.309694 Jy ! Component: 4050 - total flux cleaned = -0.310876 Jy ! Total flux subtracted in 4096 components = -0.31205 Jy ! Clean residual min=-0.035759 max=0.034065 Jy/beam ! Clean residual mean=-0.001504 rms=0.011985 Jy/beam ! Combined flux in latest and established models = 1.82385 Jy keep ! Adding 501 model components to the UV plane model. ! The established model now contains 664 components and 1.82386 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J2038+5119_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.713 x 3.13 at 34.38 degrees (North through East) ! Clean map min=-0.055671 max=0.6631 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2038+5119_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.663098 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0120235 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.43971 5.43971 10.8794 21.7588 43.5177 87.0353 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.036 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.663 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 55.15 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2038+5119_S_uvs.log closed on Sat Feb 27 22:27:15 2016