! Started logfile: /scr/pima/rv102_uvs/J2038+5119_S_dfm.log on Sat Nov 9 09:36:07 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J2038+5119_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J2038+5119_S_uva.fits ! AN table 1: 21 integrations on 10 of 10 possible baselines. ! AN table 2: 21 integrations on 6 of 6 possible baselines. ! AN table 3: 2 integrations on 21 of 21 possible baselines. ! AN table 4: 3 integrations on 28 of 28 possible baselines. ! AN table 5: 9 integrations on 3 of 3 possible baselines. ! AN table 6: 3 integrations on 1 of 1 possible baselines. ! AN table 7: 2 integrations on 45 of 45 possible baselines. ! AN table 8: 3 integrations on 6 of 6 possible baselines. ! AN table 9: 2 integrations on 1 of 1 possible baselines. ! AN table 10: 4 integrations on 55 of 55 possible baselines. ! AN table 11: 3 integrations on 3 of 3 possible baselines. ! AN table 12: 3 integrations on 3 of 3 possible baselines. ! AN table 13: 3 integrations on 28 of 28 possible baselines. ! AN table 14: 3 integrations on 6 of 6 possible baselines. ! AN table 15: 2 integrations on 3 of 3 possible baselines. ! AN table 16: 3 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.95549 visibilities/baseline/integration-bin. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3864 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2038+5119_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 11 telescope corrections were flagged in sub-array 10. ! A total of 3 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 6 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 3 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 11 telescope corrections were flagged in sub-array 10. ! A total of 3 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 3 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 13. ! A total of 6 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 3 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=2.086069Jy sigma=11.402821 ! Fit after self-cal, rms=1.132587Jy sigma=4.956676 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=2.782 mas, bpa=14.11 degrees ! Estimated noise=2.75362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.928588 Jy ! Component: 100 - total flux cleaned = 1.20876 Jy ! Total flux subtracted in 100 components = 1.20876 Jy ! Clean residual min=-0.072108 max=0.275278 Jy/beam ! Clean residual mean=0.002219 rms=0.018815 Jy/beam ! Combined flux in latest and established models = 1.20876 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.20876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.045474Jy sigma=4.505617 ! Fit after self-cal, rms=1.044576Jy sigma=4.504180 ! Inverting map ! Added new window around map position (-4.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257097 Jy ! Component: 100 - total flux cleaned = 0.424835 Jy ! Total flux subtracted in 100 components = 0.424835 Jy ! Clean residual min=-0.057406 max=0.098840 Jy/beam ! Clean residual mean=0.001791 rms=0.013435 Jy/beam ! Combined flux in latest and established models = 1.63359 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 1.63359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.891388Jy sigma=3.416290 ! Fit after self-cal, rms=0.878546Jy sigma=3.335620 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154643 Jy ! Component: 100 - total flux cleaned = 0.272541 Jy ! Total flux subtracted in 100 components = 0.272541 Jy ! Clean residual min=-0.042555 max=0.071340 Jy/beam ! Clean residual mean=0.001516 rms=0.010433 Jy/beam ! Combined flux in latest and established models = 1.90613 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 1.90614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.794388Jy sigma=2.762915 ! Fit after self-cal, rms=0.790904Jy sigma=2.742829 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104575 Jy ! Component: 100 - total flux cleaned = 0.188621 Jy ! Total flux subtracted in 100 components = 0.188621 Jy ! Clean residual min=-0.033881 max=0.054540 Jy/beam ! Clean residual mean=0.001323 rms=0.009002 Jy/beam ! Combined flux in latest and established models = 2.09476 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 2.09476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.740607Jy sigma=2.416669 ! Fit after self-cal, rms=0.739305Jy sigma=2.409656 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746339 Jy ! Component: 100 - total flux cleaned = 0.136601 Jy ! Total flux subtracted in 100 components = 0.136601 Jy ! Clean residual min=-0.030529 max=0.046020 Jy/beam ! Clean residual mean=0.001182 rms=0.008257 Jy/beam ! Combined flux in latest and established models = 2.23136 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 65 components and 2.23136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.707648Jy sigma=2.218288 ! Fit after self-cal, rms=0.707088Jy sigma=2.215134 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=3.046 mas, bpa=13.25 degrees ! Estimated noise=2.41145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110565 Jy ! Component: 100 - total flux cleaned = 0.195902 Jy ! Component: 150 - total flux cleaned = 0.263336 Jy ! Component: 200 - total flux cleaned = 0.316903 Jy ! Total flux subtracted in 200 components = 0.316903 Jy ! Clean residual min=-0.022662 max=0.066621 Jy/beam ! Clean residual mean=0.013063 rms=0.008024 Jy/beam ! Combined flux in latest and established models = 2.54826 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 2.54826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.651836Jy sigma=1.950744 ! Fit after self-cal, rms=0.650465Jy sigma=1.942870 ! Inverting map ! Added new window around map position (-5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733978 Jy ! Component: 100 - total flux cleaned = 0.123715 Jy ! Component: 150 - total flux cleaned = 0.16352 Jy ! Component: 200 - total flux cleaned = 0.196805 Jy ! Total flux subtracted in 200 components = 0.196805 Jy ! Clean residual min=-0.024967 max=0.057686 Jy/beam ! Clean residual mean=0.010437 rms=0.007220 Jy/beam ! Combined flux in latest and established models = 2.74507 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 113 components and 2.74507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.631743Jy sigma=1.812560 ! Fit after self-cal, rms=0.630445Jy sigma=1.804534 ! Inverting map ! Added new window around map position (-13, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060627 Jy ! Component: 100 - total flux cleaned = 0.0995276 Jy ! Component: 150 - total flux cleaned = 0.130027 Jy ! Component: 200 - total flux cleaned = 0.15573 Jy ! Total flux subtracted in 200 components = 0.15573 Jy ! Clean residual min=-0.024195 max=0.037675 Jy/beam ! Clean residual mean=0.008376 rms=0.006436 Jy/beam ! Combined flux in latest and established models = 2.9008 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 147 components and 2.9008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.622311Jy sigma=1.695891 ! Fit after self-cal, rms=0.621887Jy sigma=1.687704 ! Inverting map ! Added new window around map position (-15.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443149 Jy ! Component: 100 - total flux cleaned = 0.0750024 Jy ! Component: 150 - total flux cleaned = 0.0998675 Jy ! Component: 200 - total flux cleaned = 0.121632 Jy ! Total flux subtracted in 200 components = 0.121632 Jy ! Clean residual min=-0.024203 max=0.031506 Jy/beam ! Clean residual mean=0.006816 rms=0.006051 Jy/beam ! Combined flux in latest and established models = 3.02243 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 178 components and 3.02243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.614293Jy sigma=1.634820 ! Fit after self-cal, rms=0.614035Jy sigma=1.628324 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.654 x 3.046 at 13.25 degrees (North through East) ! Clean map min=-0.023119 max=1.2483 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.06 NY 1.03 ON 0.97 WF 1.08 ! WZ 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.95 NY 0.99 ON 0.97 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.05 LA 1.07 MK 0.94 ! NL 1.00 NY 0.87 SC 1.08 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.93 MA 4.99 MK 1.90 NY 1.16 ! ON 1.03 SC 1.02 WF 0.90 WZ 1.04 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.95 HN 0.92 KP 1.11 LA 1.01 ! MK 1.20 NL 1.02 NY 1.06 PT 0.99 ! SC 1.08 WF 0.89 ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.08 ON 0.94 WF 1.07 WZ 0.96 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.02 HN 1.06 KP 0.99 LA 0.99 ! MA 1.01 MK 0.85 NY 1.03 ON 0.94 ! PT 1.04 WF 1.00 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.10 HN 0.92 MA 1.45 NY 1.02 ! ON 1.03 SC 1.00 WF 1.01 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.84 ON 1.08 WF 1.01 WZ 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.88 MA 1.87 NY 0.96 ON 1.00 ! SC 1.07 WF 1.03 WZ 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.00 ON 1.02 WF 1.07 ! WZ 0.97 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 HN 1.04 LA 1.02 MK 0.99 ! NL 1.03 NY 0.88 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.95 MA 1.00* MK 1.20 NY 1.02 ! ON 1.04 SC 1.06 WF 0.91 WZ 1.00 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 0.97 KP 1.07 LA 0.99 ! MK 0.88 NL 1.03 NY 1.07 PT 0.98 ! SC 1.06 WF 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.96 ON 1.00 WF 1.08 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.03 HN 1.07 KP 1.01 LA 1.01 ! MA 1.00* MK 1.08 NY 1.11 ON 0.94 ! PT 1.07 WF 0.99 WZ 1.02 ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.07 HN 0.94 MA 1.00* NY 1.02 ! ON 1.11 SC 1.04 WF 0.99 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.92 MA 1.00* NY 0.93 ON 1.06 ! SC 1.08 WF 0.98 WZ 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.50 NY 1.02 ON 1.04 WF 1.02 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.46 NY 1.03 ON 1.03 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.05 LA 1.04 MK 0.97 ! NL 1.04 NY 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.97 MA 0.68 MK 1.13 NY 1.10 ! ON 1.03 SC 1.04 WF 0.88 WZ 0.95 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.99 HN 0.98 KP 1.07 LA 1.01 ! MK 0.91 NL 1.04 NY 1.05 PT 1.04 ! SC 1.05 WF 0.91 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.91 ON 1.07 WF 1.06 WZ 1.13 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.05 HN 1.05 KP 1.02 LA 0.98 ! MA 0.65 MK 1.07 NY 0.99 ON 1.03 ! PT 1.06 WF 0.91 WZ 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.04 HN 0.96 MA 0.48 NY 1.00 ! ON 1.03 SC 1.03 WF 0.98 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.39 ON 1.09 WF 1.08 WZ 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.95 MA 0.55 NY 0.90 ON 1.04 ! SC 1.02 WF 0.92 WZ 1.17 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.05 ON 0.97 WF 1.10 ! WZ 1.00 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.10 LA 1.02 MK 0.64 ! NL 0.97 NY 0.95 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.03 MA 1.00* MK 0.80 NY 1.01 ! ON 0.96 SC 1.07 WF 0.94 WZ 0.94 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 0.99 KP 1.07 LA 1.01 ! MK 2.01 NL 1.02 NY 1.02 PT 1.01 ! SC 1.06 WF 0.94 ! ! Telescope amplitude corrections in sub-array 8: ! NY 1.06 ON 1.03 WF 0.88 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.06 HN 1.07 KP 1.00 LA 1.04 ! MA 1.00* MK 0.71 NY 1.01 ON 1.04 ! PT 1.04 WF 0.96 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.05 HN 0.97 MA 1.00* NY 1.03 ! ON 1.22 SC 1.03 WF 1.01 WZ 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.96 MA 1.00* NY 0.99 ON 1.02 ! SC 0.96 WF 0.98 WZ 1.03 ! ! ! Fit before self-cal, rms=0.614035Jy sigma=1.628324 ! Fit after self-cal, rms=0.395873Jy sigma=1.112747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=2.996 mas, bpa=15.79 degrees ! Estimated noise=2.45243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020967 Jy ! Component: 100 - total flux cleaned = 0.0342918 Jy ! Component: 150 - total flux cleaned = 0.0448547 Jy ! Component: 200 - total flux cleaned = 0.0519772 Jy ! Total flux subtracted in 200 components = 0.0519772 Jy ! Clean residual min=-0.012486 max=0.018707 Jy/beam ! Clean residual mean=0.002465 rms=0.003800 Jy/beam ! Combined flux in latest and established models = 3.0744 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 202 components and 3.0744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393950Jy sigma=1.091270 ! Fit after self-cal, rms=0.393419Jy sigma=1.089427 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393419Jy sigma=1.089427 ! Fit after self-cal, rms=0.380753Jy sigma=1.009905 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=2.989 mas, bpa=15.9 degrees ! Estimated noise=2.45485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150907 Jy ! Component: 100 - total flux cleaned = 0.0270408 Jy ! Component: 150 - total flux cleaned = 0.037155 Jy ! Component: 200 - total flux cleaned = 0.0458576 Jy ! Total flux subtracted in 200 components = 0.0458576 Jy ! Clean residual min=-0.010569 max=0.015727 Jy/beam ! Clean residual mean=0.002094 rms=0.003262 Jy/beam ! Combined flux in latest and established models = 3.12026 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 221 components and 3.12026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379333Jy sigma=0.994036 ! Fit after self-cal, rms=0.379822Jy sigma=0.993112 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-122, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147991 Jy ! Component: 100 - total flux cleaned = 0.0237732 Jy ! Component: 150 - total flux cleaned = 0.0300673 Jy ! Component: 200 - total flux cleaned = 0.0356519 Jy ! Total flux subtracted in 200 components = 0.0356519 Jy ! Clean residual min=-0.010832 max=0.014756 Jy/beam ! Clean residual mean=0.001641 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 3.15591 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 238 components and 3.15591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379000Jy sigma=0.979203 ! Fit after self-cal, rms=0.379005Jy sigma=0.978407 ! Inverting map ! Added new window around map position (24.5, -89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133947 Jy ! Component: 100 - total flux cleaned = 0.0219382 Jy ! Component: 150 - total flux cleaned = 0.0281739 Jy ! Component: 200 - total flux cleaned = 0.0332643 Jy ! Total flux subtracted in 200 components = 0.0332643 Jy ! Clean residual min=-0.010611 max=0.013877 Jy/beam ! Clean residual mean=0.001242 rms=0.003033 Jy/beam ! Combined flux in latest and established models = 3.18918 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 257 components and 3.18918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377889Jy sigma=0.970562 ! Fit after self-cal, rms=0.377735Jy sigma=0.969791 ! Inverting map ! Added new window around map position (-0.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123705 Jy ! Component: 100 - total flux cleaned = 0.0180926 Jy ! Component: 150 - total flux cleaned = 0.0211689 Jy ! Component: 200 - total flux cleaned = 0.0230646 Jy ! Total flux subtracted in 200 components = 0.0230646 Jy ! Clean residual min=-0.010976 max=0.012548 Jy/beam ! Clean residual mean=0.000909 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 3.21224 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 273 components and 3.21224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377055Jy sigma=0.960826 ! Fit after self-cal, rms=0.376930Jy sigma=0.960367 ! Inverting map ! Added new window around map position (-15.5, -95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125595 Jy ! Component: 100 - total flux cleaned = 0.0184867 Jy ! Component: 150 - total flux cleaned = 0.0201409 Jy ! Component: 200 - total flux cleaned = 0.0216563 Jy ! Total flux subtracted in 200 components = 0.0216563 Jy ! Clean residual min=-0.010554 max=0.012042 Jy/beam ! Clean residual mean=0.000664 rms=0.002854 Jy/beam ! Combined flux in latest and established models = 3.2339 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 287 components and 3.2339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375984Jy sigma=0.953555 ! Fit after self-cal, rms=0.375758Jy sigma=0.952812 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375758Jy sigma=0.952812 ! Fit after self-cal, rms=0.360785Jy sigma=0.920897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=2.987 mas, bpa=16 degrees ! Estimated noise=2.45236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00904271 Jy ! Component: 100 - total flux cleaned = 0.0166893 Jy ! Component: 150 - total flux cleaned = 0.0234413 Jy ! Component: 200 - total flux cleaned = 0.0294979 Jy ! Total flux subtracted in 200 components = 0.0294979 Jy ! Clean residual min=-0.009175 max=0.012278 Jy/beam ! Clean residual mean=0.001087 rms=0.002682 Jy/beam ! Combined flux in latest and established models = 3.26339 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 307 components and 3.26339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360112Jy sigma=0.914862 ! Fit after self-cal, rms=0.360171Jy sigma=0.914650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, -126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117759 Jy ! Component: 100 - total flux cleaned = 0.0188369 Jy ! Component: 150 - total flux cleaned = 0.0230236 Jy ! Component: 200 - total flux cleaned = 0.0254696 Jy ! Total flux subtracted in 200 components = 0.0254696 Jy ! Clean residual min=-0.009263 max=0.011668 Jy/beam ! Clean residual mean=0.000851 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 3.28886 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 330 components and 3.28886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359149Jy sigma=0.907768 ! Fit after self-cal, rms=0.359026Jy sigma=0.907086 ! Inverting map ! Added new window around map position (98.5, 59.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969219 Jy ! Component: 100 - total flux cleaned = 0.0142539 Jy ! Component: 150 - total flux cleaned = 0.0166417 Jy ! Component: 200 - total flux cleaned = 0.0184884 Jy ! Total flux subtracted in 200 components = 0.0184884 Jy ! Clean residual min=-0.009147 max=0.011192 Jy/beam ! Clean residual mean=0.000652 rms=0.002558 Jy/beam ! Combined flux in latest and established models = 3.30735 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 339 components and 3.30735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358533Jy sigma=0.901158 ! Fit after self-cal, rms=0.358513Jy sigma=0.900820 ! Inverting map ! Added new window around map position (36.5, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104572 Jy ! Component: 100 - total flux cleaned = 0.0161529 Jy ! Component: 150 - total flux cleaned = 0.0196102 Jy ! Component: 200 - total flux cleaned = 0.0210134 Jy ! Total flux subtracted in 200 components = 0.0210134 Jy ! Clean residual min=-0.009617 max=0.010103 Jy/beam ! Clean residual mean=0.000395 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 3.32836 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 363 components and 3.32836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357979Jy sigma=0.895528 ! Fit after self-cal, rms=0.357919Jy sigma=0.895197 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357919Jy sigma=0.895197 ! Fit after self-cal, rms=0.359195Jy sigma=0.891901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.702 mas, bmaj=7.941 mas, bpa=84.11 degrees ! Estimated noise=4.67199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196859 Jy ! Component: 100 - total flux cleaned = 0.0333877 Jy ! Component: 150 - total flux cleaned = 0.0439404 Jy ! Component: 200 - total flux cleaned = 0.0525286 Jy ! Total flux subtracted in 200 components = 0.0525286 Jy ! Clean residual min=-0.015659 max=0.021643 Jy/beam ! Clean residual mean=0.001197 rms=0.005381 Jy/beam ! Combined flux in latest and established models = 3.38089 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 392 components and 3.38089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358584Jy sigma=0.893031 ! Fit after self-cal, rms=0.358473Jy sigma=0.892107 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713503 Jy ! Component: 100 - total flux cleaned = 0.0113219 Jy ! Component: 150 - total flux cleaned = 0.0142916 Jy ! Component: 200 - total flux cleaned = 0.0163292 Jy ! Total flux subtracted in 200 components = 0.0163292 Jy ! Clean residual min=-0.016352 max=0.021163 Jy/beam ! Clean residual mean=0.000375 rms=0.005478 Jy/beam ! Combined flux in latest and established models = 3.39722 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 403 components and 3.39722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358320Jy sigma=0.893888 ! Fit after self-cal, rms=0.358303Jy sigma=0.893632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=2.987 mas, bpa=16.25 degrees ! Estimated noise=2.45159 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.597 x 2.987 at 16.25 degrees (North through East) ! Clean map min=-0.0096364 max=1.2346 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358303Jy sigma=0.893632 ! Fit after self-cal, rms=0.357717Jy sigma=0.823585 ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=2.986 mas, bpa=16.05 degrees ! Estimated noise=2.45189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481459 Jy ! Component: 100 - total flux cleaned = 0.00835948 Jy ! Component: 150 - total flux cleaned = 0.0108234 Jy ! Component: 200 - total flux cleaned = 0.0125652 Jy ! Total flux subtracted in 200 components = 0.0125652 Jy ! Clean residual min=-0.009222 max=0.010381 Jy/beam ! Clean residual mean=0.000401 rms=0.002366 Jy/beam ! Combined flux in latest and established models = 3.40979 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 420 components and 3.40979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357325Jy sigma=0.820308 ! Fit after self-cal, rms=0.357267Jy sigma=0.820205 ! Inverting map ! Added new window around map position (11.5, -35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106507 Jy ! Component: 100 - total flux cleaned = 0.0156465 Jy ! Component: 150 - total flux cleaned = 0.0168246 Jy ! Component: 200 - total flux cleaned = 0.0179308 Jy ! Total flux subtracted in 200 components = 0.0179308 Jy ! Clean residual min=-0.009048 max=0.009346 Jy/beam ! Clean residual mean=0.000153 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 3.42772 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 432 components and 3.42772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356829Jy sigma=0.813179 ! Fit after self-cal, rms=0.356869Jy sigma=0.812817 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356869Jy sigma=0.812817 ! Fit after self-cal, rms=0.357581Jy sigma=0.811642 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=2.763 mas, bpa=16.42 degrees ! Estimated noise=2.80839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.920592 Jy ! Component: 100 - total flux cleaned = 1.26972 Jy ! Component: 150 - total flux cleaned = 1.51278 Jy ! Component: 200 - total flux cleaned = 1.69658 Jy ! Total flux subtracted in 200 components = 1.69658 Jy ! Clean residual min=-0.040946 max=0.107685 Jy/beam ! Clean residual mean=0.001760 rms=0.011398 Jy/beam ! Combined flux in latest and established models = 1.69658 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.69658 Jy ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=2.986 mas, bpa=16.23 degrees ! Estimated noise=2.45299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.244763 Jy ! Component: 100 - total flux cleaned = 0.427296 Jy ! Component: 150 - total flux cleaned = 0.56779 Jy ! Component: 200 - total flux cleaned = 0.680653 Jy ! Total flux subtracted in 200 components = 0.680653 Jy ! Clean residual min=-0.009104 max=0.068366 Jy/beam ! Clean residual mean=0.014903 rms=0.007905 Jy/beam ! Combined flux in latest and established models = 2.37723 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 87 components and 2.37723 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946109 Jy ! Component: 100 - total flux cleaned = 0.175225 Jy ! Component: 150 - total flux cleaned = 0.244654 Jy ! Component: 200 - total flux cleaned = 0.305205 Jy ! Total flux subtracted in 200 components = 0.305205 Jy ! Clean residual min=-0.007820 max=0.040620 Jy/beam ! Clean residual mean=0.010410 rms=0.005286 Jy/beam ! Combined flux in latest and established models = 2.68243 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 141 components and 2.68243 Jy ! Inverting map ! Added new window around map position (-8, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539875 Jy ! Component: 100 - total flux cleaned = 0.101668 Jy ! Component: 150 - total flux cleaned = 0.144143 Jy ! Component: 200 - total flux cleaned = 0.182251 Jy ! Total flux subtracted in 200 components = 0.182251 Jy ! Clean residual min=-0.007784 max=0.028125 Jy/beam ! Clean residual mean=0.007764 rms=0.004115 Jy/beam ! Combined flux in latest and established models = 2.86469 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 196 components and 2.86469 Jy ! Inverting map ! Added new window around map position (-10.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351822 Jy ! Component: 100 - total flux cleaned = 0.0669746 Jy ! Component: 150 - total flux cleaned = 0.0961975 Jy ! Component: 200 - total flux cleaned = 0.12327 Jy ! Total flux subtracted in 200 components = 0.12327 Jy ! Clean residual min=-0.008075 max=0.020703 Jy/beam ! Clean residual mean=0.006069 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 2.98796 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 249 components and 2.98796 Jy ! Inverting map ! Added new window around map position (-14, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259775 Jy ! Component: 100 - total flux cleaned = 0.0496904 Jy ! Component: 150 - total flux cleaned = 0.0718197 Jy ! Component: 200 - total flux cleaned = 0.092576 Jy ! Total flux subtracted in 200 components = 0.092576 Jy ! Clean residual min=-0.007664 max=0.016920 Jy/beam ! Clean residual mean=0.004846 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 3.08053 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 290 components and 3.08053 Jy ! Inverting map ! Added new window around map position (-11.5, -117). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202118 Jy ! Component: 100 - total flux cleaned = 0.038825 Jy ! Component: 150 - total flux cleaned = 0.0564567 Jy ! Component: 200 - total flux cleaned = 0.0731807 Jy ! Total flux subtracted in 200 components = 0.0731807 Jy ! Clean residual min=-0.007309 max=0.014866 Jy/beam ! Clean residual mean=0.003932 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 3.15371 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 326 components and 3.15371 Jy ! Inverting map ! Added new window around map position (-18, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168733 Jy ! Component: 100 - total flux cleaned = 0.0320759 Jy ! Component: 150 - total flux cleaned = 0.0464698 Jy ! Component: 200 - total flux cleaned = 0.060123 Jy ! Total flux subtracted in 200 components = 0.060123 Jy ! Clean residual min=-0.007278 max=0.012812 Jy/beam ! Clean residual mean=0.003151 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 3.21384 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 353 components and 3.21384 Jy ! Inverting map ! Added new window around map position (-3, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138697 Jy ! Component: 100 - total flux cleaned = 0.0262802 Jy ! Component: 150 - total flux cleaned = 0.0380565 Jy ! Component: 200 - total flux cleaned = 0.0492444 Jy ! Total flux subtracted in 200 components = 0.0492444 Jy ! Clean residual min=-0.007061 max=0.011604 Jy/beam ! Clean residual mean=0.002518 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 3.26308 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 393 components and 3.26308 Jy ! Inverting map ! Added new window around map position (-17, -88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123572 Jy ! Component: 100 - total flux cleaned = 0.0227089 Jy ! Component: 150 - total flux cleaned = 0.03251 Jy ! Component: 200 - total flux cleaned = 0.0418395 Jy ! Total flux subtracted in 200 components = 0.0418395 Jy ! Clean residual min=-0.007058 max=0.010371 Jy/beam ! Clean residual mean=0.002002 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 3.30492 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 426 components and 3.30492 Jy ! Inverting map ! Added new window around map position (-93, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114969 Jy ! Component: 100 - total flux cleaned = 0.0203879 Jy ! Component: 150 - total flux cleaned = 0.0287802 Jy ! Component: 200 - total flux cleaned = 0.0367633 Jy ! Total flux subtracted in 200 components = 0.0367633 Jy ! Clean residual min=-0.007305 max=0.009245 Jy/beam ! Clean residual mean=0.001580 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 3.34168 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 450 components and 3.34168 Jy ! Inverting map ! Added new window around map position (-128, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090903 Jy ! Component: 100 - total flux cleaned = 0.016586 Jy ! Component: 150 - total flux cleaned = 0.0237455 Jy ! Component: 200 - total flux cleaned = 0.0305921 Jy ! Total flux subtracted in 200 components = 0.0305921 Jy ! Clean residual min=-0.007140 max=0.008502 Jy/beam ! Clean residual mean=0.001218 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 3.37228 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 470 components and 3.37228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.703 mas, bmaj=7.931 mas, bpa=84.06 degrees ! Estimated noise=4.67989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228226 Jy ! Component: 100 - total flux cleaned = 0.03981 Jy ! Component: 150 - total flux cleaned = 0.0533965 Jy ! Component: 200 - total flux cleaned = 0.0648292 Jy ! Total flux subtracted in 200 components = 0.0648292 Jy ! Clean residual min=-0.012582 max=0.016342 Jy/beam ! Clean residual mean=0.001849 rms=0.004352 Jy/beam ! Combined flux in latest and established models = 3.43711 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973904 Jy ! Component: 100 - total flux cleaned = 0.0180669 Jy ! Component: 150 - total flux cleaned = 0.0252264 Jy ! Component: 200 - total flux cleaned = 0.0297569 Jy ! Total flux subtracted in 200 components = 0.0297569 Jy ! Clean residual min=-0.013598 max=0.014559 Jy/beam ! Clean residual mean=0.000357 rms=0.004147 Jy/beam ! Combined flux in latest and established models = 3.46686 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 547 components and 3.46686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=2.986 mas, bpa=16.23 degrees ! Estimated noise=2.45299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110869 Jy ! Component: 100 - total flux cleaned = 0.00189658 Jy ! Component: 150 - total flux cleaned = 0.0029843 Jy ! Component: 200 - total flux cleaned = 0.00367485 Jy ! Total flux subtracted in 200 components = 0.00367485 Jy ! Clean residual min=-0.008363 max=0.007364 Jy/beam ! Clean residual mean=0.000032 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 3.47054 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 577 components and 3.47054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355604Jy sigma=0.783246 ! Fit after self-cal, rms=0.354610Jy sigma=0.778412 wmodel J2038+5119_S_map.mod ! Writing 577 model components to file: J2038+5119_S_map.mod wobs J2038+5119_S_uvs.fits ! Writing UV FITS file: J2038+5119_S_uvs.fits wwins J2038+5119_S_map.win ! wwins: Wrote 23 windows to J2038+5119_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232281 Jy ! Component: 100 - total flux cleaned = -0.00246162 Jy ! Component: 150 - total flux cleaned = -0.00232718 Jy ! Component: 200 - total flux cleaned = -0.00219711 Jy ! Component: 250 - total flux cleaned = -0.00244704 Jy ! Component: 300 - total flux cleaned = -0.00232208 Jy ! Component: 350 - total flux cleaned = -0.00220058 Jy ! Component: 400 - total flux cleaned = -0.0022011 Jy ! Component: 450 - total flux cleaned = -0.0023186 Jy ! Component: 500 - total flux cleaned = -0.00220295 Jy ! Component: 550 - total flux cleaned = -0.00220316 Jy ! Component: 600 - total flux cleaned = -0.00209045 Jy ! Component: 650 - total flux cleaned = -0.00209162 Jy ! Component: 700 - total flux cleaned = -0.00209248 Jy ! Component: 750 - total flux cleaned = -0.00209332 Jy ! Component: 800 - total flux cleaned = -0.00198611 Jy ! Component: 850 - total flux cleaned = -0.00187999 Jy ! Component: 900 - total flux cleaned = -0.00177577 Jy ! Component: 950 - total flux cleaned = -0.00177523 Jy ! Component: 1000 - total flux cleaned = -0.00136248 Jy ! Component: 1050 - total flux cleaned = -0.00136323 Jy ! Component: 1100 - total flux cleaned = -0.00126175 Jy ! Component: 1150 - total flux cleaned = -0.00116114 Jy ! Component: 1200 - total flux cleaned = -0.00086204 Jy ! Component: 1250 - total flux cleaned = -0.000862433 Jy ! Component: 1300 - total flux cleaned = -0.000763792 Jy ! Component: 1350 - total flux cleaned = -0.000666395 Jy ! Component: 1400 - total flux cleaned = -0.000569761 Jy ! Component: 1450 - total flux cleaned = -0.000569735 Jy ! Component: 1500 - total flux cleaned = -0.000474524 Jy ! Component: 1550 - total flux cleaned = -0.000285032 Jy ! Component: 1600 - total flux cleaned = -0.000284567 Jy ! Component: 1650 - total flux cleaned = -0.000191015 Jy ! Component: 1700 - total flux cleaned = -9.83056e-05 Jy ! Component: 1750 - total flux cleaned = -6.16578e-06 Jy ! Component: 1800 - total flux cleaned = 8.55532e-05 Jy ! Component: 1850 - total flux cleaned = 0.000176778 Jy ! Component: 1900 - total flux cleaned = 0.000447936 Jy ! Component: 1950 - total flux cleaned = 0.000268621 Jy ! Component: 2000 - total flux cleaned = 0.000358455 Jy ! Component: 2050 - total flux cleaned = 0.000447594 Jy ! Component: 2100 - total flux cleaned = 0.000711996 Jy ! Component: 2150 - total flux cleaned = 0.000887165 Jy ! Component: 2200 - total flux cleaned = 0.000974185 Jy ! Component: 2250 - total flux cleaned = 0.00106098 Jy ! Component: 2300 - total flux cleaned = 0.00106117 Jy ! Component: 2350 - total flux cleaned = 0.00123297 Jy ! Component: 2400 - total flux cleaned = 0.00140337 Jy ! Component: 2450 - total flux cleaned = 0.00148827 Jy ! Component: 2500 - total flux cleaned = 0.00165749 Jy ! Component: 2550 - total flux cleaned = 0.00174178 Jy ! Component: 2600 - total flux cleaned = 0.00182574 Jy ! Component: 2650 - total flux cleaned = 0.00199253 Jy ! Component: 2700 - total flux cleaned = 0.00215856 Jy ! Component: 2750 - total flux cleaned = 0.00232359 Jy ! Component: 2800 - total flux cleaned = 0.00240583 Jy ! Component: 2850 - total flux cleaned = 0.00256882 Jy ! Component: 2900 - total flux cleaned = 0.00256925 Jy ! Component: 2950 - total flux cleaned = 0.00297399 Jy ! Component: 3000 - total flux cleaned = 0.0029736 Jy ! Component: 3050 - total flux cleaned = 0.00305355 Jy ! Component: 3100 - total flux cleaned = 0.00305391 Jy ! Component: 3150 - total flux cleaned = 0.0031335 Jy ! Component: 3200 - total flux cleaned = 0.00337085 Jy ! Component: 3250 - total flux cleaned = 0.00344947 Jy ! Component: 3300 - total flux cleaned = 0.00360654 Jy ! Component: 3350 - total flux cleaned = 0.00368448 Jy ! Component: 3400 - total flux cleaned = 0.00368448 Jy ! Component: 3450 - total flux cleaned = 0.00368474 Jy ! Component: 3500 - total flux cleaned = 0.00391667 Jy ! Component: 3550 - total flux cleaned = 0.00414779 Jy ! Component: 3600 - total flux cleaned = 0.00414753 Jy ! Component: 3650 - total flux cleaned = 0.00414792 Jy ! Component: 3700 - total flux cleaned = 0.0042241 Jy ! Component: 3750 - total flux cleaned = 0.00452687 Jy ! Component: 3800 - total flux cleaned = 0.00460224 Jy ! Component: 3850 - total flux cleaned = 0.00452713 Jy ! Component: 3900 - total flux cleaned = 0.00475155 Jy ! Component: 3950 - total flux cleaned = 0.00482578 Jy ! Component: 4000 - total flux cleaned = 0.00482565 Jy ! Component: 4050 - total flux cleaned = 0.00489941 Jy ! Total flux subtracted in 4096 components = 0.00504659 Jy ! Clean residual min=-0.004167 max=0.005600 Jy/beam ! Clean residual mean=0.000023 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 3.47558 Jy keep ! Adding 355 model components to the UV plane model. ! The established model now contains 932 components and 3.47558 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J2038+5119_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 2.986 at 16.23 degrees (North through East) ! Clean map min=-0.0073533 max=1.2377 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J2038+5119_S_map.fits wmodel /scr/pima/rv102_uvs/J2038+5119_S_map.mod ! Writing 932 model components to file: /scr/pima/rv102_uvs/J2038+5119_S_map.mod wobs /scr/pima/rv102_uvs/J2038+5119_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J2038+5119_S_uvs.fits wwins /scr/pima/rv102_uvs/J2038+5119_S_map.win ! wwins: Wrote 24 windows to /scr/pima/rv102_uvs/J2038+5119_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.23775 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00130423 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.316112 0.316112 0.632224 1.26445 2.5289 5.05779 10.1156 20.2312 40.4623 80.9247 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.237 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 949.03 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J2038+5119_S_dfm.log closed on Sat Nov 9 09:36:13 2019