! Started logfile: /scr/pima/rv102_uvs/J1919+0619_X_uvs.log on Sat Feb 27 22:27:58 2016
obs /scr/pima/rv102_uvs/J1919+0619_X_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J1919+0619_X_uva.fits
! AN table 1: 175 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.715238 visibilities/baseline/integration-bin.
! Found source: J1919+0619
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 18024 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1919+0619_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008361Jy  sigma=18.433757
! Fit after  self-cal, rms=0.939696Jy  sigma=17.250537
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6787 mas, bmaj=1.794 mas, bpa=-2.017 degrees
! Estimated noise=0.56063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494617 Jy
! Component: 100  -  total flux cleaned = 0.0602476 Jy
! Total flux subtracted in 100 components = 0.0602476 Jy
! Clean residual min=-0.004807 max=0.004927 Jy/beam
! Clean residual mean=0.000004 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.0602476 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.0602476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111147Jy  sigma=1.768997
! Fit after  self-cal, rms=0.109449Jy  sigma=1.735608
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.837 mas, bmaj=2.028 mas, bpa=-2.107 degrees
! Estimated noise=0.296139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00527187 Jy
! Component: 100  -  total flux cleaned = 0.00514062 Jy
! Component: 150  -  total flux cleaned = 0.0049654 Jy
! Component: 200  -  total flux cleaned = 0.00475385 Jy
! Total flux subtracted in 200 components = 0.00475385 Jy
! Clean residual min=-0.004098 max=0.004612 Jy/beam
! Clean residual mean=0.000006 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.0650014 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0650014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109018Jy  sigma=1.732285
! Fit after  self-cal, rms=0.108892Jy  sigma=1.731292
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.837 x 2.028 at -2.107 degrees (North through East)
! Clean map  min=-0.0039554  max=0.067589 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.108892Jy  sigma=1.731292
! Fit after  self-cal, rms=0.108892Jy  sigma=1.731292
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.837 mas, bmaj=2.028 mas, bpa=-2.107 degrees
! Estimated noise=0.296139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000572344 Jy
! Component: 100  -  total flux cleaned = -0.000716665 Jy
! Component: 150  -  total flux cleaned = -0.00077884 Jy
! Component: 200  -  total flux cleaned = -0.000860998 Jy
! Total flux subtracted in 200 components = -0.000860998 Jy
! Clean residual min=-0.004140 max=0.004573 Jy/beam
! Clean residual mean=0.000006 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.0641404 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0641404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108856Jy  sigma=1.731024
! Fit after  self-cal, rms=0.108806Jy  sigma=1.730857
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108806Jy  sigma=1.730857
! Fit after  self-cal, rms=0.109266Jy  sigma=1.729987
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.835 mas, bmaj=2.027 mas, bpa=-2.278 degrees
! Estimated noise=0.298696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484054 Jy
! Component: 100  -  total flux cleaned = 0.000542997 Jy
! Component: 150  -  total flux cleaned = 0.000568881 Jy
! Component: 200  -  total flux cleaned = 0.000545271 Jy
! Total flux subtracted in 200 components = 0.000545271 Jy
! Clean residual min=-0.004050 max=0.004505 Jy/beam
! Clean residual mean=0.000005 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.0646857 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.0646857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109233Jy  sigma=1.729950
! Fit after  self-cal, rms=0.109197Jy  sigma=1.729578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.6, -21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393788 Jy
! Component: 100  -  total flux cleaned = 0.00581062 Jy
! Component: 150  -  total flux cleaned = 0.00704907 Jy
! Component: 200  -  total flux cleaned = 0.00745736 Jy
! Total flux subtracted in 200 components = 0.00745736 Jy
! Clean residual min=-0.003922 max=0.004177 Jy/beam
! Clean residual mean=0.000002 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.0721431 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.0721431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109025Jy  sigma=1.726766
! Fit after  self-cal, rms=0.108900Jy  sigma=1.725141
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108900Jy  sigma=1.725141
! Fit after  self-cal, rms=0.108930Jy  sigma=1.725111
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.027 mas, bpa=-2.306 degrees
! Estimated noise=0.298912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251298 Jy
! Component: 100  -  total flux cleaned = 0.00376715 Jy
! Component: 150  -  total flux cleaned = 0.00447326 Jy
! Component: 200  -  total flux cleaned = 0.00461128 Jy
! Total flux subtracted in 200 components = 0.00461128 Jy
! Clean residual min=-0.003886 max=0.003870 Jy/beam
! Clean residual mean=0.000002 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.0767544 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.0767543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108841Jy  sigma=1.724016
! Fit after  self-cal, rms=0.108779Jy  sigma=1.722951
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178406 Jy
! Component: 100  -  total flux cleaned = 0.00251597 Jy
! Component: 150  -  total flux cleaned = 0.00268759 Jy
! Component: 200  -  total flux cleaned = 0.00281521 Jy
! Total flux subtracted in 200 components = 0.00281521 Jy
! Clean residual min=-0.003903 max=0.003660 Jy/beam
! Clean residual mean=0.000001 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.0795695 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 0.0795695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108724Jy  sigma=1.722379
! Fit after  self-cal, rms=0.108689Jy  sigma=1.721720
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108689Jy  sigma=1.721720
! Fit after  self-cal, rms=0.108794Jy  sigma=1.720917
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.039 mas, bmaj=3.755 mas, bpa=-7.92 degrees
! Estimated noise=0.38259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186729 Jy
! Component: 100  -  total flux cleaned = 0.00243962 Jy
! Component: 150  -  total flux cleaned = 0.00267149 Jy
! Component: 200  -  total flux cleaned = 0.00284006 Jy
! Total flux subtracted in 200 components = 0.00284006 Jy
! Clean residual min=-0.004808 max=0.004725 Jy/beam
! Clean residual mean=0.000003 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 0.0824096 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.0824096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108759Jy  sigma=1.720710
! Fit after  self-cal, rms=0.108752Jy  sigma=1.719980
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139411 Jy
! Component: 100  -  total flux cleaned = 0.00161328 Jy
! Component: 150  -  total flux cleaned = 0.00177212 Jy
! Component: 200  -  total flux cleaned = 0.00185687 Jy
! Total flux subtracted in 200 components = 0.00185687 Jy
! Clean residual min=-0.004549 max=0.004544 Jy/beam
! Clean residual mean=0.000004 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.0842665 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 70 components and 0.0842665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108728Jy  sigma=1.719878
! Fit after  self-cal, rms=0.108702Jy  sigma=1.719674
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8346 mas, bmaj=2.028 mas, bpa=-2.381 degrees
! Estimated noise=0.299381 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8346 x 2.028 at -2.381 degrees (North through East)
! Clean map  min=-0.0035077  max=0.068224 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.678 mas, bmaj=1.799 mas, bpa=-2.36 degrees
! Estimated noise=0.565829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0519798 Jy
! Component: 100  -  total flux cleaned = 0.064906 Jy
! Component: 150  -  total flux cleaned = 0.0713874 Jy
! Component: 200  -  total flux cleaned = 0.0746552 Jy
! Total flux subtracted in 200 components = 0.0746552 Jy
! Clean residual min=-0.005029 max=0.005490 Jy/beam
! Clean residual mean=0.000001 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.0746552 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0746552 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8346 mas, bmaj=2.028 mas, bpa=-2.381 degrees
! Estimated noise=0.299381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.4, 10.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00522602 Jy
! Component: 100  -  total flux cleaned = 0.00711703 Jy
! Component: 150  -  total flux cleaned = 0.00848039 Jy
! Component: 200  -  total flux cleaned = 0.00898373 Jy
! Total flux subtracted in 200 components = 0.00898373 Jy
! Clean residual min=-0.003380 max=0.003662 Jy/beam
! Clean residual mean=0.000002 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.0836389 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 47 components and 0.0836389 Jy
! Inverting map 
! Added new window around map position (9.6, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345736 Jy
! Component: 100  -  total flux cleaned = 0.004138 Jy
! Component: 150  -  total flux cleaned = 0.00486731 Jy
! Component: 200  -  total flux cleaned = 0.00532445 Jy
! Total flux subtracted in 200 components = 0.00532445 Jy
! Clean residual min=-0.003206 max=0.003157 Jy/beam
! Clean residual mean=0.000003 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0889634 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.0889634 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.039 mas, bmaj=3.755 mas, bpa=-7.92 degrees
! Estimated noise=0.38259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152381 Jy
! Component: 100  -  total flux cleaned = 0.00195397 Jy
! Component: 150  -  total flux cleaned = 0.00222818 Jy
! Component: 200  -  total flux cleaned = 0.00238895 Jy
! Total flux subtracted in 200 components = 0.00238895 Jy
! Clean residual min=-0.002986 max=0.003255 Jy/beam
! Clean residual mean=0.000007 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.0913523 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.66948e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106808 Jy
! Component: 150  -  total flux cleaned = 0.000140951 Jy
! Component: 200  -  total flux cleaned = 0.000141648 Jy
! Total flux subtracted in 200 components = 0.000141648 Jy
! Clean residual min=-0.002953 max=0.003204 Jy/beam
! Clean residual mean=0.000007 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.091494 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 99 components and 0.0914939 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8346 mas, bmaj=2.028 mas, bpa=-2.381 degrees
! Estimated noise=0.299381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179291 Jy
! Component: 100  -  total flux cleaned = -0.00027157 Jy
! Component: 150  -  total flux cleaned = -0.00027038 Jy
! Component: 200  -  total flux cleaned = -0.000268751 Jy
! Total flux subtracted in 200 components = -0.000268751 Jy
! Clean residual min=-0.002963 max=0.003135 Jy/beam
! Clean residual mean=0.000003 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.0912252 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 114 components and 0.0912252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108538Jy  sigma=1.715718
! Fit after  self-cal, rms=0.108390Jy  sigma=1.713545
wmodel /scr/pima/rv102_uvs/J1919+0619_X_map.mod
! Writing 114 model components to file: /scr/pima/rv102_uvs/J1919+0619_X_map.mod
wobs /scr/pima/rv102_uvs/J1919+0619_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J1919+0619_X_uvs.fits
wwins /scr/pima/rv102_uvs/J1919+0619_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J1919+0619_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130634 Jy
! Component: 100  -  total flux cleaned = 0.000209662 Jy
! Component: 150  -  total flux cleaned = 0.000528913 Jy
! Component: 200  -  total flux cleaned = 0.000616167 Jy
! Component: 250  -  total flux cleaned = 0.000699821 Jy
! Component: 300  -  total flux cleaned = 0.000740078 Jy
! Component: 350  -  total flux cleaned = 0.000818249 Jy
! Component: 400  -  total flux cleaned = 0.000856534 Jy
! Component: 450  -  total flux cleaned = 0.000966159 Jy
! Component: 500  -  total flux cleaned = 0.00093186 Jy
! Component: 550  -  total flux cleaned = 0.00110776 Jy
! Component: 600  -  total flux cleaned = 0.00120924 Jy
! Component: 650  -  total flux cleaned = 0.00127446 Jy
! Component: 700  -  total flux cleaned = 0.00130621 Jy
! Component: 750  -  total flux cleaned = 0.00140265 Jy
! Component: 800  -  total flux cleaned = 0.0015592 Jy
! Component: 850  -  total flux cleaned = 0.00171353 Jy
! Component: 900  -  total flux cleaned = 0.0019854 Jy
! Component: 950  -  total flux cleaned = 0.00231163 Jy
! Component: 1000  -  total flux cleaned = 0.00248622 Jy
! Component: 1050  -  total flux cleaned = 0.00268686 Jy
! Component: 1100  -  total flux cleaned = 0.00285622 Jy
! Component: 1150  -  total flux cleaned = 0.00305013 Jy
! Component: 1200  -  total flux cleaned = 0.00318683 Jy
! Component: 1250  -  total flux cleaned = 0.00340176 Jy
! Component: 1300  -  total flux cleaned = 0.00364037 Jy
! Component: 1350  -  total flux cleaned = 0.00382289 Jy
! Component: 1400  -  total flux cleaned = 0.00390008 Jy
! Component: 1450  -  total flux cleaned = 0.00405243 Jy
! Component: 1500  -  total flux cleaned = 0.00417751 Jy
! Component: 1550  -  total flux cleaned = 0.0042767 Jy
! Component: 1600  -  total flux cleaned = 0.00442395 Jy
! Component: 1650  -  total flux cleaned = 0.00449711 Jy
! Component: 1700  -  total flux cleaned = 0.0046644 Jy
! Component: 1750  -  total flux cleaned = 0.00485327 Jy
! Component: 1800  -  total flux cleaned = 0.00489983 Jy
! Component: 1850  -  total flux cleaned = 0.00496919 Jy
! Component: 1900  -  total flux cleaned = 0.00506014 Jy
! Component: 1950  -  total flux cleaned = 0.00515048 Jy
! Component: 2000  -  total flux cleaned = 0.00526128 Jy
! Component: 2050  -  total flux cleaned = 0.00532728 Jy
! Component: 2100  -  total flux cleaned = 0.00534922 Jy
! Component: 2150  -  total flux cleaned = 0.00545714 Jy
! Component: 2200  -  total flux cleaned = 0.0055 Jy
! Component: 2250  -  total flux cleaned = 0.00568983 Jy
! Component: 2300  -  total flux cleaned = 0.00562693 Jy
! Component: 2350  -  total flux cleaned = 0.00573021 Jy
! Component: 2400  -  total flux cleaned = 0.00575059 Jy
! Component: 2450  -  total flux cleaned = 0.00587217 Jy
! Component: 2500  -  total flux cleaned = 0.00585178 Jy
! Component: 2550  -  total flux cleaned = 0.0059911 Jy
! Component: 2600  -  total flux cleaned = 0.0060501 Jy
! Component: 2650  -  total flux cleaned = 0.0061285 Jy
! Component: 2700  -  total flux cleaned = 0.00614772 Jy
! Component: 2750  -  total flux cleaned = 0.0062244 Jy
! Component: 2800  -  total flux cleaned = 0.00624346 Jy
! Component: 2850  -  total flux cleaned = 0.00626236 Jy
! Component: 2900  -  total flux cleaned = 0.00629982 Jy
! Component: 2950  -  total flux cleaned = 0.00633734 Jy
! Component: 3000  -  total flux cleaned = 0.00644811 Jy
! Component: 3050  -  total flux cleaned = 0.00652121 Jy
! Component: 3100  -  total flux cleaned = 0.00652129 Jy
! Component: 3150  -  total flux cleaned = 0.00666546 Jy
! Component: 3200  -  total flux cleaned = 0.00673684 Jy
! Component: 3250  -  total flux cleaned = 0.00684329 Jy
! Component: 3300  -  total flux cleaned = 0.00693114 Jy
! Component: 3350  -  total flux cleaned = 0.0069837 Jy
! Component: 3400  -  total flux cleaned = 0.00710525 Jy
! Component: 3450  -  total flux cleaned = 0.00719156 Jy
! Component: 3500  -  total flux cleaned = 0.00731145 Jy
! Component: 3550  -  total flux cleaned = 0.00739657 Jy
! Component: 3600  -  total flux cleaned = 0.00743039 Jy
! Component: 3650  -  total flux cleaned = 0.00749766 Jy
! Component: 3700  -  total flux cleaned = 0.00756465 Jy
! Component: 3750  -  total flux cleaned = 0.00763105 Jy
! Component: 3800  -  total flux cleaned = 0.00769732 Jy
! Component: 3850  -  total flux cleaned = 0.00776313 Jy
! Component: 3900  -  total flux cleaned = 0.0077795 Jy
! Component: 3950  -  total flux cleaned = 0.00795814 Jy
! Component: 4000  -  total flux cleaned = 0.00800665 Jy
! Component: 4050  -  total flux cleaned = 0.00805485 Jy
! Total flux subtracted in 4096 components = 0.00813474 Jy
! Clean residual min=-0.000928 max=0.001043 Jy/beam
! Clean residual mean=-0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0993599 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 404 components and 0.09936 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J1919+0619_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8346 x 2.028 at -2.381 degrees (North through East)
! Clean map  min=-0.0023098  max=0.065797 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1919+0619_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0657974 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270464 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.23317 1.23317 2.46633 4.93266 9.86532 19.7306 39.4613 78.9226
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  243.276 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J1919+0619_X_uvs.log closed on Sat Feb 27 22:28:03 2016