! Started logfile: /scr/pima/rv102_uvs/J1624-0649_S_uvs.log on Sat Feb 27 22:26:19 2016 obs /scr/pima/rv102_uvs/J1624-0649_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1624-0649_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.77551 visibilities/baseline/integration-bin. ! Found source: J1624-0649 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 3344 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1624-0649_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.030765Jy sigma=15.509713 ! Fit after self-cal, rms=0.865181Jy sigma=13.048915 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.744 mas, bpa=1.158 degrees ! Estimated noise=1.66308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0968475 Jy ! Component: 100 - total flux cleaned = 0.141069 Jy ! Total flux subtracted in 100 components = 0.141069 Jy ! Clean residual min=-0.028710 max=0.050445 Jy/beam ! Clean residual mean=-0.000004 rms=0.009897 Jy/beam ! Combined flux in latest and established models = 0.141069 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.141069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184919Jy sigma=2.802388 ! Fit after self-cal, rms=0.183544Jy sigma=2.786625 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054939 Jy ! Component: 100 - total flux cleaned = 0.0790404 Jy ! Component: 150 - total flux cleaned = 0.0899891 Jy ! Component: 200 - total flux cleaned = 0.0934556 Jy ! Total flux subtracted in 200 components = 0.0934556 Jy ! Clean residual min=-0.045534 max=0.079567 Jy/beam ! Clean residual mean=0.000012 rms=0.018261 Jy/beam ! Combined flux in latest and established models = 0.234525 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.234525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166406Jy sigma=2.621156 ! Fit after self-cal, rms=0.165336Jy sigma=2.612403 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 8.25 at -0.1207 degrees (North through East) ! Clean map min=-0.044441 max=0.13993 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.165336Jy sigma=2.612403 ! Fit after self-cal, rms=0.165336Jy sigma=2.612403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597637 Jy ! Component: 100 - total flux cleaned = 0.00598177 Jy ! Component: 150 - total flux cleaned = 0.00573315 Jy ! Component: 200 - total flux cleaned = 0.00552435 Jy ! Total flux subtracted in 200 components = 0.00552435 Jy ! Clean residual min=-0.045095 max=0.079554 Jy/beam ! Clean residual mean=0.000010 rms=0.018200 Jy/beam ! Combined flux in latest and established models = 0.240049 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.240049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164228Jy sigma=2.606641 ! Fit after self-cal, rms=0.163908Jy sigma=2.605119 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163908Jy sigma=2.605119 ! Fit after self-cal, rms=0.163908Jy sigma=2.605119 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271478 Jy ! Component: 100 - total flux cleaned = 0.000292215 Jy ! Component: 150 - total flux cleaned = 0.000286576 Jy ! Component: 200 - total flux cleaned = 0.000282663 Jy ! Total flux subtracted in 200 components = 0.000282663 Jy ! Clean residual min=-0.045609 max=0.078712 Jy/beam ! Clean residual mean=0.000010 rms=0.018158 Jy/beam ! Combined flux in latest and established models = 0.240332 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.240332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163263Jy sigma=2.598471 ! Fit after self-cal, rms=0.163107Jy sigma=2.597678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0767216 Jy ! Component: 100 - total flux cleaned = 0.11456 Jy ! Component: 150 - total flux cleaned = 0.135531 Jy ! Component: 200 - total flux cleaned = 0.147641 Jy ! Total flux subtracted in 200 components = 0.147641 Jy ! Clean residual min=-0.036055 max=0.064858 Jy/beam ! Clean residual mean=0.000014 rms=0.013146 Jy/beam ! Combined flux in latest and established models = 0.387973 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.387973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130463Jy sigma=1.994211 ! Fit after self-cal, rms=0.119221Jy sigma=1.809254 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119221Jy sigma=1.809254 ! Fit after self-cal, rms=0.119221Jy sigma=1.809254 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316925 Jy ! Component: 100 - total flux cleaned = 0.0486132 Jy ! Component: 150 - total flux cleaned = 0.0544691 Jy ! Component: 200 - total flux cleaned = 0.057495 Jy ! Total flux subtracted in 200 components = 0.057495 Jy ! Clean residual min=-0.027978 max=0.040729 Jy/beam ! Clean residual mean=0.000006 rms=0.009638 Jy/beam ! Combined flux in latest and established models = 0.445468 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 123 components and 0.445468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111485Jy sigma=1.670428 ! Fit after self-cal, rms=0.109200Jy sigma=1.632691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111154 Jy ! Component: 100 - total flux cleaned = 0.0137843 Jy ! Component: 150 - total flux cleaned = 0.0153707 Jy ! Component: 200 - total flux cleaned = 0.0165305 Jy ! Total flux subtracted in 200 components = 0.0165305 Jy ! Clean residual min=-0.024694 max=0.031823 Jy/beam ! Clean residual mean=0.000008 rms=0.008767 Jy/beam ! Combined flux in latest and established models = 0.461998 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 139 components and 0.461998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107102Jy sigma=1.594566 ! Fit after self-cal, rms=0.106527Jy sigma=1.584322 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106527Jy sigma=1.584322 ! Fit after self-cal, rms=0.106527Jy sigma=1.584322 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.756 mas, bmaj=16.36 mas, bpa=8.86 degrees ! Estimated noise=1.02739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124061 Jy ! Component: 100 - total flux cleaned = 0.0148362 Jy ! Component: 150 - total flux cleaned = 0.0163429 Jy ! Component: 200 - total flux cleaned = 0.0164936 Jy ! Total flux subtracted in 200 components = 0.0164936 Jy ! Clean residual min=-0.041404 max=0.052087 Jy/beam ! Clean residual mean=0.000021 rms=0.015835 Jy/beam ! Combined flux in latest and established models = 0.478492 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 0.478492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106457Jy sigma=1.577730 ! Fit after self-cal, rms=0.105943Jy sigma=1.570702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318994 Jy ! Component: 100 - total flux cleaned = 0.00473616 Jy ! Component: 150 - total flux cleaned = 0.00503887 Jy ! Component: 200 - total flux cleaned = 0.00503432 Jy ! Total flux subtracted in 200 components = 0.00503432 Jy ! Clean residual min=-0.039989 max=0.050103 Jy/beam ! Clean residual mean=0.000025 rms=0.015591 Jy/beam ! Combined flux in latest and established models = 0.483526 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 165 components and 0.483526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106115Jy sigma=1.569341 ! Fit after self-cal, rms=0.105989Jy sigma=1.566797 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 8.25 at -0.1207 degrees (North through East) ! Clean map min=-0.023398 max=0.13275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.744 mas, bpa=1.158 degrees ! Estimated noise=1.66308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0992421 Jy ! Component: 100 - total flux cleaned = 0.164425 Jy ! Component: 150 - total flux cleaned = 0.210791 Jy ! Component: 200 - total flux cleaned = 0.246711 Jy ! Total flux subtracted in 200 components = 0.246711 Jy ! Clean residual min=-0.022410 max=0.029676 Jy/beam ! Clean residual mean=0.000030 rms=0.007187 Jy/beam ! Combined flux in latest and established models = 0.246711 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.246711 Jy ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0604738 Jy ! Component: 100 - total flux cleaned = 0.103534 Jy ! Component: 150 - total flux cleaned = 0.135174 Jy ! Component: 200 - total flux cleaned = 0.158653 Jy ! Total flux subtracted in 200 components = 0.158653 Jy ! Clean residual min=-0.028037 max=0.029424 Jy/beam ! Clean residual mean=0.000026 rms=0.009093 Jy/beam ! Combined flux in latest and established models = 0.405364 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 88 components and 0.405364 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.756 mas, bmaj=16.36 mas, bpa=8.86 degrees ! Estimated noise=1.02739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030823 Jy ! Component: 100 - total flux cleaned = 0.0489617 Jy ! Component: 150 - total flux cleaned = 0.0609006 Jy ! Component: 200 - total flux cleaned = 0.0687966 Jy ! Total flux subtracted in 200 components = 0.0687966 Jy ! Clean residual min=-0.040075 max=0.050029 Jy/beam ! Clean residual mean=0.000025 rms=0.015455 Jy/beam ! Combined flux in latest and established models = 0.47416 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523559 Jy ! Component: 100 - total flux cleaned = 0.00666058 Jy ! Component: 150 - total flux cleaned = 0.00739545 Jy ! Component: 200 - total flux cleaned = 0.00810451 Jy ! Total flux subtracted in 200 components = 0.00810451 Jy ! Clean residual min=-0.039179 max=0.049948 Jy/beam ! Clean residual mean=0.000022 rms=0.015399 Jy/beam ! Combined flux in latest and established models = 0.482265 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 108 components and 0.482265 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.25 mas, bpa=-0.1207 degrees ! Estimated noise=0.845301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340726 Jy ! Component: 100 - total flux cleaned = 1.06232e-05 Jy ! Component: 150 - total flux cleaned = -0.000544921 Jy ! Component: 200 - total flux cleaned = -0.000540898 Jy ! Total flux subtracted in 200 components = -0.000540898 Jy ! Clean residual min=-0.024094 max=0.029349 Jy/beam ! Clean residual mean=0.000007 rms=0.008311 Jy/beam ! Combined flux in latest and established models = 0.481724 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.481724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107078Jy sigma=1.570589 ! Fit after self-cal, rms=0.105498Jy sigma=1.558925 wmodel /scr/pima/rv102_uvs/J1624-0649_S_map.mod ! Writing 127 model components to file: /scr/pima/rv102_uvs/J1624-0649_S_map.mod wobs /scr/pima/rv102_uvs/J1624-0649_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1624-0649_S_uvs.fits wwins /scr/pima/rv102_uvs/J1624-0649_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J1624-0649_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126745 Jy ! Component: 100 - total flux cleaned = 0.0222552 Jy ! Component: 150 - total flux cleaned = 0.0273574 Jy ! Component: 200 - total flux cleaned = 0.0317116 Jy ! Component: 250 - total flux cleaned = 0.0340828 Jy ! Component: 300 - total flux cleaned = 0.0350365 Jy ! Component: 350 - total flux cleaned = 0.0347403 Jy ! Component: 400 - total flux cleaned = 0.0347402 Jy ! Component: 450 - total flux cleaned = 0.03365 Jy ! Component: 500 - total flux cleaned = 0.0331356 Jy ! Component: 550 - total flux cleaned = 0.0321352 Jy ! Component: 600 - total flux cleaned = 0.0311783 Jy ! Component: 650 - total flux cleaned = 0.030267 Jy ! Component: 700 - total flux cleaned = 0.0289401 Jy ! Component: 750 - total flux cleaned = 0.0270236 Jy ! Component: 800 - total flux cleaned = 0.0243448 Jy ! Component: 850 - total flux cleaned = 0.0223463 Jy ! Component: 900 - total flux cleaned = 0.0204055 Jy ! Component: 950 - total flux cleaned = 0.0183264 Jy ! Component: 1000 - total flux cleaned = 0.0163139 Jy ! Component: 1050 - total flux cleaned = 0.0143596 Jy ! Component: 1100 - total flux cleaned = 0.0126324 Jy ! Component: 1150 - total flux cleaned = 0.0109507 Jy ! Component: 1200 - total flux cleaned = 0.00947291 Jy ! Component: 1250 - total flux cleaned = 0.00770936 Jy ! Component: 1300 - total flux cleaned = 0.00645566 Jy ! Component: 1350 - total flux cleaned = 0.0049259 Jy ! Component: 1400 - total flux cleaned = 0.00357987 Jy ! Component: 1450 - total flux cleaned = 0.00240634 Jy ! Component: 1500 - total flux cleaned = 0.00168691 Jy ! Component: 1550 - total flux cleaned = 0.000703685 Jy ! Component: 1600 - total flux cleaned = 1.33335e-05 Jy ! Component: 1650 - total flux cleaned = -0.00134986 Jy ! Component: 1700 - total flux cleaned = -0.00268899 Jy ! Component: 1750 - total flux cleaned = -0.00361436 Jy ! Component: 1800 - total flux cleaned = -0.0047883 Jy ! Component: 1850 - total flux cleaned = -0.00581617 Jy ! Component: 1900 - total flux cleaned = -0.00670501 Jy ! Component: 1950 - total flux cleaned = -0.00758209 Jy ! Component: 2000 - total flux cleaned = -0.00807832 Jy ! Component: 2050 - total flux cleaned = -0.00893877 Jy ! Component: 2100 - total flux cleaned = -0.00966604 Jy ! Component: 2150 - total flux cleaned = -0.0099065 Jy ! Component: 2200 - total flux cleaned = -0.0105015 Jy ! Component: 2250 - total flux cleaned = -0.0110922 Jy ! Component: 2300 - total flux cleaned = -0.011443 Jy ! Component: 2350 - total flux cleaned = -0.0122548 Jy ! Component: 2400 - total flux cleaned = -0.0124847 Jy ! Component: 2450 - total flux cleaned = -0.0130554 Jy ! Component: 2500 - total flux cleaned = -0.0133951 Jy ! Component: 2550 - total flux cleaned = -0.0138446 Jy ! Component: 2600 - total flux cleaned = -0.0141798 Jy ! Component: 2650 - total flux cleaned = -0.0145133 Jy ! Component: 2700 - total flux cleaned = -0.0145127 Jy ! Component: 2750 - total flux cleaned = -0.0147342 Jy ! Component: 2800 - total flux cleaned = -0.0147341 Jy ! Component: 2850 - total flux cleaned = -0.0149536 Jy ! Component: 2900 - total flux cleaned = -0.0150635 Jy ! Component: 2950 - total flux cleaned = -0.0153929 Jy ! Component: 3000 - total flux cleaned = -0.0155027 Jy ! Component: 3050 - total flux cleaned = -0.0156126 Jy ! Component: 3100 - total flux cleaned = -0.0156126 Jy ! Component: 3150 - total flux cleaned = -0.0158332 Jy ! Component: 3200 - total flux cleaned = -0.0158331 Jy ! Component: 3250 - total flux cleaned = -0.0157219 Jy ! Component: 3300 - total flux cleaned = -0.0158334 Jy ! Component: 3350 - total flux cleaned = -0.0157215 Jy ! Component: 3400 - total flux cleaned = -0.0157212 Jy ! Component: 3450 - total flux cleaned = -0.0158328 Jy ! Component: 3500 - total flux cleaned = -0.0159461 Jy ! Component: 3550 - total flux cleaned = -0.0158331 Jy ! Component: 3600 - total flux cleaned = -0.0158336 Jy ! Component: 3650 - total flux cleaned = -0.0159477 Jy ! Component: 3700 - total flux cleaned = -0.0159477 Jy ! Component: 3750 - total flux cleaned = -0.0159476 Jy ! Component: 3800 - total flux cleaned = -0.0159473 Jy ! Component: 3850 - total flux cleaned = -0.0158304 Jy ! Component: 3900 - total flux cleaned = -0.0157131 Jy ! Component: 3950 - total flux cleaned = -0.0159488 Jy ! Component: 4000 - total flux cleaned = -0.015712 Jy ! Component: 4050 - total flux cleaned = -0.015951 Jy ! Total flux subtracted in 4096 components = -0.0158314 Jy ! Clean residual min=-0.008088 max=0.007437 Jy/beam ! Clean residual mean=0.000049 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.465893 Jy keep ! Adding 467 model components to the UV plane model. ! The established model now contains 594 components and 0.465892 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J1624-0649_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 8.25 at -0.1207 degrees (North through East) ! Clean map min=-0.015313 max=0.12234 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1624-0649_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122341 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00256355 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.28622 6.28622 12.5724 25.1449 50.2898 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0076 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.122 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 47.723 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1624-0649_S_uvs.log closed on Sat Feb 27 22:26:23 2016