! Started logfile: /scr/pima/rv102_uvs/J1534-2243_X_uvs.log on Sat Feb 27 22:26:54 2016 obs /scr/pima/rv102_uvs/J1534-2243_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1534-2243_X_uva.fits ! AN table 1: 87 integrations on 28 of 28 possible baselines. ! AN table 2: 87 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.847994 visibilities/baseline/integration-bin. ! Found source: J1534-2243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 14460 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1534-2243_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009579Jy sigma=16.610503 ! Fit after self-cal, rms=0.914214Jy sigma=15.093615 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6103 mas, bmaj=1.673 mas, bpa=-5.6 degrees ! Estimated noise=0.709208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696928 Jy ! Component: 100 - total flux cleaned = 0.0864925 Jy ! Total flux subtracted in 100 components = 0.0864925 Jy ! Clean residual min=-0.006441 max=0.008899 Jy/beam ! Clean residual mean=-0.000005 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.0864925 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0864925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127072Jy sigma=1.845713 ! Fit after self-cal, rms=0.126147Jy sigma=1.830299 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7715 mas, bmaj=2.004 mas, bpa=-4.444 degrees ! Estimated noise=0.366295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118127 Jy ! Component: 100 - total flux cleaned = 0.0168009 Jy ! Component: 150 - total flux cleaned = 0.0192921 Jy ! Component: 200 - total flux cleaned = 0.02016 Jy ! Total flux subtracted in 200 components = 0.02016 Jy ! Clean residual min=-0.006120 max=0.008443 Jy/beam ! Clean residual mean=-0.000004 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.106653 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.106652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125146Jy sigma=1.813311 ! Fit after self-cal, rms=0.125213Jy sigma=1.811401 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7715 x 2.004 at -4.444 degrees (North through East) ! Clean map min=-0.0057673 max=0.092682 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.11 KP 1.03 LA 0.94 ! MK 1.05 NL 1.03 PT 0.96 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.14 KP 0.92 LA 0.93 ! MK 1.13 NL 1.01 PT 0.86 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 0.94 KP 0.95 LA 0.92 ! MK 0.95 NL 1.13 PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.125213Jy sigma=1.811401 ! Fit after self-cal, rms=0.123850Jy sigma=1.806886 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7769 mas, bmaj=2.016 mas, bpa=-4.329 degrees ! Estimated noise=0.357691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199414 Jy ! Component: 100 - total flux cleaned = -0.00243199 Jy ! Component: 150 - total flux cleaned = -0.00240129 Jy ! Component: 200 - total flux cleaned = -0.002346 Jy ! Total flux subtracted in 200 components = -0.002346 Jy ! Clean residual min=-0.005572 max=0.006392 Jy/beam ! Clean residual mean=-0.000005 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.104306 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.104306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123826Jy sigma=1.806062 ! Fit after self-cal, rms=0.123957Jy sigma=1.805639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123957Jy sigma=1.805639 ! Fit after self-cal, rms=0.123491Jy sigma=1.805408 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7787 mas, bmaj=2.026 mas, bpa=-4.416 degrees ! Estimated noise=0.355146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121719 Jy ! Component: 100 - total flux cleaned = -0.0012488 Jy ! Component: 150 - total flux cleaned = -0.00122235 Jy ! Component: 200 - total flux cleaned = -0.00119726 Jy ! Total flux subtracted in 200 components = -0.00119726 Jy ! Clean residual min=-0.005412 max=0.006253 Jy/beam ! Clean residual mean=-0.000005 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.103109 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.103109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123479Jy sigma=1.804991 ! Fit after self-cal, rms=0.123501Jy sigma=1.804960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72218e-06 Jy ! Component: 100 - total flux cleaned = 5.01889e-05 Jy ! Component: 150 - total flux cleaned = 7.4264e-05 Jy ! Component: 200 - total flux cleaned = 0.000118772 Jy ! Total flux subtracted in 200 components = 0.000118772 Jy ! Clean residual min=-0.005368 max=0.006230 Jy/beam ! Clean residual mean=-0.000005 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.103228 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.103228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123493Jy sigma=1.804811 ! Fit after self-cal, rms=0.123488Jy sigma=1.804698 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123488Jy sigma=1.804698 ! Fit after self-cal, rms=0.123101Jy sigma=1.804640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=2.033 mas, bpa=-4.499 degrees ! Estimated noise=0.35378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599602 Jy ! Component: 100 - total flux cleaned = -0.000575644 Jy ! Component: 150 - total flux cleaned = -0.000553285 Jy ! Component: 200 - total flux cleaned = -0.000531641 Jy ! Total flux subtracted in 200 components = -0.000531641 Jy ! Clean residual min=-0.005270 max=0.006143 Jy/beam ! Clean residual mean=-0.000006 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.102696 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.102696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123093Jy sigma=1.804417 ! Fit after self-cal, rms=0.123098Jy sigma=1.804399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18463e-05 Jy ! Component: 100 - total flux cleaned = 4.37185e-05 Jy ! Component: 150 - total flux cleaned = 6.45332e-05 Jy ! Component: 200 - total flux cleaned = 0.000103443 Jy ! Total flux subtracted in 200 components = 0.000103443 Jy ! Clean residual min=-0.005244 max=0.006123 Jy/beam ! Clean residual mean=-0.000005 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.1028 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 21 components and 0.1028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123092Jy sigma=1.804293 ! Fit after self-cal, rms=0.123095Jy sigma=1.804281 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123095Jy sigma=1.804281 ! Fit after self-cal, rms=0.122938Jy sigma=1.804259 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.263 mas, bmaj=6.317 mas, bpa=-1.711 degrees ! Estimated noise=0.458761 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039256 Jy ! Component: 100 - total flux cleaned = 0.00041206 Jy ! Component: 150 - total flux cleaned = 0.000412096 Jy ! Component: 200 - total flux cleaned = 0.000429529 Jy ! Total flux subtracted in 200 components = 0.000429529 Jy ! Clean residual min=-0.007445 max=0.010222 Jy/beam ! Clean residual mean=-0.000016 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 0.103229 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 23 components and 0.103229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122934Jy sigma=1.804281 ! Fit after self-cal, rms=0.122923Jy sigma=1.804085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78223e-05 Jy ! Component: 100 - total flux cleaned = 1.80857e-05 Jy ! Component: 150 - total flux cleaned = 3.48326e-05 Jy ! Component: 200 - total flux cleaned = 5.08873e-05 Jy ! Total flux subtracted in 200 components = 5.08873e-05 Jy ! Clean residual min=-0.007458 max=0.010223 Jy/beam ! Clean residual mean=-0.000016 rms=0.003056 Jy/beam ! Combined flux in latest and established models = 0.10328 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 23 components and 0.10328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122926Jy sigma=1.804159 ! Fit after self-cal, rms=0.122922Jy sigma=1.804129 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7796 mas, bmaj=2.038 mas, bpa=-4.573 degrees ! Estimated noise=0.353237 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7796 x 2.038 at -4.573 degrees (North through East) ! Clean map min=-0.0048592 max=0.088162 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6123 mas, bmaj=1.688 mas, bpa=-5.681 degrees ! Estimated noise=0.695057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679623 Jy ! Component: 100 - total flux cleaned = 0.0856456 Jy ! Component: 150 - total flux cleaned = 0.0938485 Jy ! Component: 200 - total flux cleaned = 0.0969961 Jy ! Total flux subtracted in 200 components = 0.0969961 Jy ! Clean residual min=-0.005818 max=0.007112 Jy/beam ! Clean residual mean=-0.000003 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.0969961 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0969961 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7796 mas, bmaj=2.038 mas, bpa=-4.573 degrees ! Estimated noise=0.353237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711151 Jy ! Component: 100 - total flux cleaned = 0.0106398 Jy ! Component: 150 - total flux cleaned = 0.0117168 Jy ! Component: 200 - total flux cleaned = 0.0120627 Jy ! Total flux subtracted in 200 components = 0.0120627 Jy ! Clean residual min=-0.004719 max=0.005209 Jy/beam ! Clean residual mean=-0.000006 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.109059 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.109059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.263 mas, bmaj=6.317 mas, bpa=-1.711 degrees ! Estimated noise=0.458761 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165059 Jy ! Component: 100 - total flux cleaned = 0.00164338 Jy ! Component: 150 - total flux cleaned = 0.00181533 Jy ! Component: 200 - total flux cleaned = 0.00191592 Jy ! Total flux subtracted in 200 components = 0.00191592 Jy ! Clean residual min=-0.006292 max=0.007406 Jy/beam ! Clean residual mean=-0.000016 rms=0.002300 Jy/beam ! Combined flux in latest and established models = 0.110975 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24827e-06 Jy ! Component: 100 - total flux cleaned = 2.26167e-06 Jy ! Component: 150 - total flux cleaned = -1.50982e-07 Jy ! Component: 200 - total flux cleaned = -2.8529e-06 Jy ! Total flux subtracted in 200 components = -2.8529e-06 Jy ! Clean residual min=-0.006314 max=0.007382 Jy/beam ! Clean residual mean=-0.000016 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.110972 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.110972 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7796 mas, bmaj=2.038 mas, bpa=-4.573 degrees ! Estimated noise=0.353237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448895 Jy ! Component: 100 - total flux cleaned = -0.000379388 Jy ! Component: 150 - total flux cleaned = -0.000382665 Jy ! Component: 200 - total flux cleaned = -0.000335496 Jy ! Total flux subtracted in 200 components = -0.000335496 Jy ! Clean residual min=-0.004640 max=0.005112 Jy/beam ! Clean residual mean=-0.000006 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.110636 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.110636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122748Jy sigma=1.797203 ! Fit after self-cal, rms=0.122588Jy sigma=1.793871 wmodel /scr/pima/rv102_uvs/J1534-2243_X_map.mod ! Writing 58 model components to file: /scr/pima/rv102_uvs/J1534-2243_X_map.mod wobs /scr/pima/rv102_uvs/J1534-2243_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1534-2243_X_uvs.fits wwins /scr/pima/rv102_uvs/J1534-2243_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J1534-2243_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218425 Jy ! Component: 100 - total flux cleaned = 0.00296087 Jy ! Component: 150 - total flux cleaned = 0.00353471 Jy ! Component: 200 - total flux cleaned = 0.00413233 Jy ! Component: 250 - total flux cleaned = 0.00462807 Jy ! Component: 300 - total flux cleaned = 0.00526779 Jy ! Component: 350 - total flux cleaned = 0.00571187 Jy ! Component: 400 - total flux cleaned = 0.00608263 Jy ! Component: 450 - total flux cleaned = 0.00628705 Jy ! Component: 500 - total flux cleaned = 0.00663102 Jy ! Component: 550 - total flux cleaned = 0.00705691 Jy ! Component: 600 - total flux cleaned = 0.00737615 Jy ! Component: 650 - total flux cleaned = 0.00750962 Jy ! Component: 700 - total flux cleaned = 0.00763964 Jy ! Component: 750 - total flux cleaned = 0.00776591 Jy ! Component: 800 - total flux cleaned = 0.00784837 Jy ! Component: 850 - total flux cleaned = 0.008007 Jy ! Component: 900 - total flux cleaned = 0.00816148 Jy ! Component: 950 - total flux cleaned = 0.00838632 Jy ! Component: 1000 - total flux cleaned = 0.00853199 Jy ! Component: 1050 - total flux cleaned = 0.00867431 Jy ! Component: 1100 - total flux cleaned = 0.00874429 Jy ! Component: 1150 - total flux cleaned = 0.00884745 Jy ! Component: 1200 - total flux cleaned = 0.00894749 Jy ! Component: 1250 - total flux cleaned = 0.0090123 Jy ! Component: 1300 - total flux cleaned = 0.0090755 Jy ! Component: 1350 - total flux cleaned = 0.00910639 Jy ! Component: 1400 - total flux cleaned = 0.00910736 Jy ! Component: 1450 - total flux cleaned = 0.00925701 Jy ! Component: 1500 - total flux cleaned = 0.00928586 Jy ! Component: 1550 - total flux cleaned = 0.0093433 Jy ! Component: 1600 - total flux cleaned = 0.00959589 Jy ! Component: 1650 - total flux cleaned = 0.00970591 Jy ! Component: 1700 - total flux cleaned = 0.00981435 Jy ! Component: 1750 - total flux cleaned = 0.00994728 Jy ! Component: 1800 - total flux cleaned = 0.0101043 Jy ! Component: 1850 - total flux cleaned = 0.0101816 Jy ! Component: 1900 - total flux cleaned = 0.0102574 Jy ! Component: 1950 - total flux cleaned = 0.0103816 Jy ! Component: 2000 - total flux cleaned = 0.0104305 Jy ! Component: 2050 - total flux cleaned = 0.0105028 Jy ! Component: 2100 - total flux cleaned = 0.0106214 Jy ! Component: 2150 - total flux cleaned = 0.0106448 Jy ! Component: 2200 - total flux cleaned = 0.0107605 Jy ! Component: 2250 - total flux cleaned = 0.0108287 Jy ! Component: 2300 - total flux cleaned = 0.0109179 Jy ! Component: 2350 - total flux cleaned = 0.0109624 Jy ! Component: 2400 - total flux cleaned = 0.0110494 Jy ! Component: 2450 - total flux cleaned = 0.0110277 Jy ! Component: 2500 - total flux cleaned = 0.0110914 Jy ! Component: 2550 - total flux cleaned = 0.0111543 Jy ! Component: 2600 - total flux cleaned = 0.0111126 Jy ! Component: 2650 - total flux cleaned = 0.0110921 Jy ! Component: 2700 - total flux cleaned = 0.0111732 Jy ! Component: 2750 - total flux cleaned = 0.0111532 Jy ! Component: 2800 - total flux cleaned = 0.011173 Jy ! Component: 2850 - total flux cleaned = 0.0112123 Jy ! Component: 2900 - total flux cleaned = 0.0111539 Jy ! Component: 2950 - total flux cleaned = 0.011173 Jy ! Component: 3000 - total flux cleaned = 0.0111345 Jy ! Component: 3050 - total flux cleaned = 0.0111155 Jy ! Component: 3100 - total flux cleaned = 0.0110969 Jy ! Component: 3150 - total flux cleaned = 0.0111156 Jy ! Component: 3200 - total flux cleaned = 0.0111341 Jy ! Component: 3250 - total flux cleaned = 0.0110607 Jy ! Component: 3300 - total flux cleaned = 0.0110246 Jy ! Component: 3350 - total flux cleaned = 0.0109527 Jy ! Component: 3400 - total flux cleaned = 0.0108813 Jy ! Component: 3450 - total flux cleaned = 0.0108991 Jy ! Component: 3500 - total flux cleaned = 0.0108813 Jy ! Component: 3550 - total flux cleaned = 0.0108289 Jy ! Component: 3600 - total flux cleaned = 0.010777 Jy ! Component: 3650 - total flux cleaned = 0.0107425 Jy ! Component: 3700 - total flux cleaned = 0.0106912 Jy ! Component: 3750 - total flux cleaned = 0.0106064 Jy ! Component: 3800 - total flux cleaned = 0.0105724 Jy ! Component: 3850 - total flux cleaned = 0.0105053 Jy ! Component: 3900 - total flux cleaned = 0.010372 Jy ! Component: 3950 - total flux cleaned = 0.0103224 Jy ! Component: 4000 - total flux cleaned = 0.0102563 Jy ! Component: 4050 - total flux cleaned = 0.0101091 Jy ! Total flux subtracted in 4096 components = 0.0100603 Jy ! Clean residual min=-0.000933 max=0.000994 Jy/beam ! Clean residual mean=-0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.120697 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 352 components and 0.120697 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J1534-2243_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7796 x 2.038 at -4.573 degrees (North through East) ! Clean map min=-0.0017532 max=0.086273 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1534-2243_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0862725 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.925273 0.925273 1.85055 3.70109 7.40218 14.8044 29.6087 59.2175 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.086 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 324.228 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1534-2243_X_uvs.log closed on Sat Feb 27 22:26:59 2016