! Started logfile: /scr/pima/rv102_uvs/J1534-2243_S_uvs.log on Sat Feb 27 22:26:02 2016 obs /scr/pima/rv102_uvs/J1534-2243_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1534-2243_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.918367 visibilities/baseline/integration-bin. ! Found source: J1534-2243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 3960 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1534-2243_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002413Jy sigma=13.524970 ! Fit after self-cal, rms=0.919684Jy sigma=12.352446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=6.413 mas, bpa=-4.021 degrees ! Estimated noise=1.57791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596657 Jy ! Component: 100 - total flux cleaned = 0.0771186 Jy ! Total flux subtracted in 100 components = 0.0771186 Jy ! Clean residual min=-0.010577 max=0.016146 Jy/beam ! Clean residual mean=-0.000022 rms=0.003086 Jy/beam ! Combined flux in latest and established models = 0.0771186 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0771186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084106Jy sigma=1.046496 ! Fit after self-cal, rms=0.083241Jy sigma=1.036445 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.897 mas, bpa=-4.886 degrees ! Estimated noise=0.874881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016412 Jy ! Component: 100 - total flux cleaned = 0.0248089 Jy ! Component: 150 - total flux cleaned = 0.0293947 Jy ! Component: 200 - total flux cleaned = 0.0300387 Jy ! Total flux subtracted in 200 components = 0.0300387 Jy ! Clean residual min=-0.009920 max=0.016218 Jy/beam ! Clean residual mean=-0.000015 rms=0.003546 Jy/beam ! Combined flux in latest and established models = 0.107157 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.107157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080493Jy sigma=0.988348 ! Fit after self-cal, rms=0.080620Jy sigma=0.987123 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 7.897 at -4.886 degrees (North through East) ! Clean map min=-0.009564 max=0.077159 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.080620Jy sigma=0.987123 ! Fit after self-cal, rms=0.080620Jy sigma=0.987123 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.897 mas, bpa=-4.886 degrees ! Estimated noise=0.874881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131725 Jy ! Component: 100 - total flux cleaned = 0.00165481 Jy ! Component: 150 - total flux cleaned = 0.00196794 Jy ! Component: 200 - total flux cleaned = 0.00226144 Jy ! Total flux subtracted in 200 components = 0.00226144 Jy ! Clean residual min=-0.009632 max=0.015542 Jy/beam ! Clean residual mean=-0.000010 rms=0.003472 Jy/beam ! Combined flux in latest and established models = 0.109419 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.109419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080368Jy sigma=0.983921 ! Fit after self-cal, rms=0.080362Jy sigma=0.983848 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080362Jy sigma=0.983848 ! Fit after self-cal, rms=0.080362Jy sigma=0.983848 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.897 mas, bpa=-4.886 degrees ! Estimated noise=0.874881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183285 Jy ! Component: 100 - total flux cleaned = 0.000457725 Jy ! Component: 150 - total flux cleaned = 0.000719281 Jy ! Component: 200 - total flux cleaned = 0.000883316 Jy ! Total flux subtracted in 200 components = 0.000883316 Jy ! Clean residual min=-0.009422 max=0.015235 Jy/beam ! Clean residual mean=-0.000007 rms=0.003441 Jy/beam ! Combined flux in latest and established models = 0.110302 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 22 components and 0.110302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080201Jy sigma=0.981603 ! Fit after self-cal, rms=0.080189Jy sigma=0.981563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.5, 117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152034 Jy ! Component: 100 - total flux cleaned = 0.0232292 Jy ! Component: 150 - total flux cleaned = 0.0257858 Jy ! Component: 200 - total flux cleaned = 0.0270307 Jy ! Total flux subtracted in 200 components = 0.0270307 Jy ! Clean residual min=-0.007757 max=0.010742 Jy/beam ! Clean residual mean=0.000030 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.137333 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 0.137333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077630Jy sigma=0.932135 ! Fit after self-cal, rms=0.077080Jy sigma=0.921995 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077080Jy sigma=0.921995 ! Fit after self-cal, rms=0.077441Jy sigma=0.920813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=7.921 mas, bpa=-5.037 degrees ! Estimated noise=0.874917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489482 Jy ! Component: 100 - total flux cleaned = 0.0058285 Jy ! Component: 150 - total flux cleaned = 0.00642862 Jy ! Component: 200 - total flux cleaned = 0.00680752 Jy ! Total flux subtracted in 200 components = 0.00680752 Jy ! Clean residual min=-0.007485 max=0.007116 Jy/beam ! Clean residual mean=0.000035 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.14414 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.14414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076965Jy sigma=0.911146 ! Fit after self-cal, rms=0.076907Jy sigma=0.909415 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178457 Jy ! Component: 100 - total flux cleaned = 0.00224859 Jy ! Component: 150 - total flux cleaned = 0.00254448 Jy ! Component: 200 - total flux cleaned = 0.00273227 Jy ! Total flux subtracted in 200 components = 0.00273227 Jy ! Clean residual min=-0.007336 max=0.006906 Jy/beam ! Clean residual mean=0.000034 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 0.146873 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.146873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076747Jy sigma=0.906239 ! Fit after self-cal, rms=0.076714Jy sigma=0.905743 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076714Jy sigma=0.905743 ! Fit after self-cal, rms=0.076047Jy sigma=0.905235 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.611 mas, bmaj=21.33 mas, bpa=-1.517 degrees ! Estimated noise=1.0661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423127 Jy ! Component: 100 - total flux cleaned = 0.00482779 Jy ! Component: 150 - total flux cleaned = 0.00516078 Jy ! Component: 200 - total flux cleaned = 0.00552343 Jy ! Total flux subtracted in 200 components = 0.00552343 Jy ! Clean residual min=-0.010763 max=0.010370 Jy/beam ! Clean residual mean=0.000085 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 0.152396 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.152396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076112Jy sigma=0.904846 ! Fit after self-cal, rms=0.076018Jy sigma=0.904009 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362003 Jy ! Component: 100 - total flux cleaned = 0.000666516 Jy ! Component: 150 - total flux cleaned = 0.000932208 Jy ! Component: 200 - total flux cleaned = 0.00116561 Jy ! Total flux subtracted in 200 components = 0.00116561 Jy ! Clean residual min=-0.010768 max=0.010241 Jy/beam ! Clean residual mean=0.000089 rms=0.003206 Jy/beam ! Combined flux in latest and established models = 0.153562 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 91 components and 0.153562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076192Jy sigma=0.904818 ! Fit after self-cal, rms=0.076141Jy sigma=0.904518 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.91 mas, bpa=-4.985 degrees ! Estimated noise=0.874483 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.846 x 7.91 at -4.985 degrees (North through East) ! Clean map min=-0.0074884 max=0.068642 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.241 mas, bmaj=6.449 mas, bpa=-4.155 degrees ! Estimated noise=1.57262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591058 Jy ! Component: 100 - total flux cleaned = 0.0819118 Jy ! Component: 150 - total flux cleaned = 0.0969673 Jy ! Component: 200 - total flux cleaned = 0.108092 Jy ! Total flux subtracted in 200 components = 0.108092 Jy ! Clean residual min=-0.009258 max=0.013114 Jy/beam ! Clean residual mean=-0.000011 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 0.108092 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.108092 Jy ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.91 mas, bpa=-4.985 degrees ! Estimated noise=0.874483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01452 Jy ! Component: 100 - total flux cleaned = 0.0239302 Jy ! Component: 150 - total flux cleaned = 0.0304981 Jy ! Component: 200 - total flux cleaned = 0.0349979 Jy ! Total flux subtracted in 200 components = 0.0349979 Jy ! Clean residual min=-0.007508 max=0.007800 Jy/beam ! Clean residual mean=0.000018 rms=0.002053 Jy/beam ! Combined flux in latest and established models = 0.14309 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 63 components and 0.14309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.611 mas, bmaj=21.33 mas, bpa=-1.517 degrees ! Estimated noise=1.0661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577905 Jy ! Component: 100 - total flux cleaned = 0.00710814 Jy ! Component: 150 - total flux cleaned = 0.00800395 Jy ! Component: 200 - total flux cleaned = 0.00872441 Jy ! Total flux subtracted in 200 components = 0.00872441 Jy ! Clean residual min=-0.009985 max=0.010256 Jy/beam ! Clean residual mean=0.000073 rms=0.003264 Jy/beam ! Combined flux in latest and established models = 0.151814 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661606 Jy ! Component: 100 - total flux cleaned = 0.000897173 Jy ! Component: 150 - total flux cleaned = 0.000972022 Jy ! Component: 200 - total flux cleaned = 0.00104293 Jy ! Total flux subtracted in 200 components = 0.00104293 Jy ! Clean residual min=-0.009826 max=0.009980 Jy/beam ! Clean residual mean=0.000077 rms=0.003172 Jy/beam ! Combined flux in latest and established models = 0.152857 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.152857 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.91 mas, bpa=-4.985 degrees ! Estimated noise=0.874483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190271 Jy ! Component: 100 - total flux cleaned = -0.0020235 Jy ! Component: 150 - total flux cleaned = -0.00222436 Jy ! Component: 200 - total flux cleaned = -0.0020629 Jy ! Total flux subtracted in 200 components = -0.0020629 Jy ! Clean residual min=-0.006380 max=0.007073 Jy/beam ! Clean residual mean=0.000032 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.150794 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.150794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075653Jy sigma=0.899065 ! Fit after self-cal, rms=0.075521Jy sigma=0.896755 wmodel /scr/pima/rv102_uvs/J1534-2243_S_map.mod ! Writing 100 model components to file: /scr/pima/rv102_uvs/J1534-2243_S_map.mod wobs /scr/pima/rv102_uvs/J1534-2243_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1534-2243_S_uvs.fits wwins /scr/pima/rv102_uvs/J1534-2243_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv102_uvs/J1534-2243_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606688 Jy ! Component: 100 - total flux cleaned = 0.000718769 Jy ! Component: 150 - total flux cleaned = 0.0010266 Jy ! Component: 200 - total flux cleaned = 0.00150533 Jy ! Component: 250 - total flux cleaned = 0.0017762 Jy ! Component: 300 - total flux cleaned = 0.00203286 Jy ! Component: 350 - total flux cleaned = 0.00219234 Jy ! Component: 400 - total flux cleaned = 0.00257563 Jy ! Component: 450 - total flux cleaned = 0.00294277 Jy ! Component: 500 - total flux cleaned = 0.00329595 Jy ! Component: 550 - total flux cleaned = 0.00349977 Jy ! Component: 600 - total flux cleaned = 0.00382916 Jy ! Component: 650 - total flux cleaned = 0.00408533 Jy ! Component: 700 - total flux cleaned = 0.00451566 Jy ! Component: 750 - total flux cleaned = 0.00487225 Jy ! Component: 800 - total flux cleaned = 0.00544768 Jy ! Component: 850 - total flux cleaned = 0.00595141 Jy ! Component: 900 - total flux cleaned = 0.00649514 Jy ! Component: 950 - total flux cleaned = 0.00702375 Jy ! Component: 1000 - total flux cleaned = 0.00743556 Jy ! Component: 1050 - total flux cleaned = 0.0076886 Jy ! Component: 1100 - total flux cleaned = 0.00798331 Jy ! Component: 1150 - total flux cleaned = 0.00817433 Jy ! Component: 1200 - total flux cleaned = 0.00850073 Jy ! Component: 1250 - total flux cleaned = 0.00872861 Jy ! Component: 1300 - total flux cleaned = 0.00895106 Jy ! Component: 1350 - total flux cleaned = 0.00929807 Jy ! Component: 1400 - total flux cleaned = 0.00959526 Jy ! Component: 1450 - total flux cleaned = 0.00992739 Jy ! Component: 1500 - total flux cleaned = 0.0101307 Jy ! Component: 1550 - total flux cleaned = 0.0102508 Jy ! Component: 1600 - total flux cleaned = 0.0106013 Jy ! Component: 1650 - total flux cleaned = 0.0107533 Jy ! Component: 1700 - total flux cleaned = 0.011015 Jy ! Component: 1750 - total flux cleaned = 0.0112719 Jy ! Component: 1800 - total flux cleaned = 0.01156 Jy ! Component: 1850 - total flux cleaned = 0.0117717 Jy ! Component: 1900 - total flux cleaned = 0.0121184 Jy ! Component: 1950 - total flux cleaned = 0.0123235 Jy ! Component: 2000 - total flux cleaned = 0.0125571 Jy ! Component: 2050 - total flux cleaned = 0.0127542 Jy ! Component: 2100 - total flux cleaned = 0.0130128 Jy ! Component: 2150 - total flux cleaned = 0.0133629 Jy ! Component: 2200 - total flux cleaned = 0.013832 Jy ! Component: 2250 - total flux cleaned = 0.0141406 Jy ! Component: 2300 - total flux cleaned = 0.0145954 Jy ! Component: 2350 - total flux cleaned = 0.0148943 Jy ! Component: 2400 - total flux cleaned = 0.0150711 Jy ! Component: 2450 - total flux cleaned = 0.0152753 Jy ! Component: 2500 - total flux cleaned = 0.0155343 Jy ! Component: 2550 - total flux cleaned = 0.0157616 Jy ! Component: 2600 - total flux cleaned = 0.0159868 Jy ! Component: 2650 - total flux cleaned = 0.0162368 Jy ! Component: 2700 - total flux cleaned = 0.0164292 Jy ! Component: 2750 - total flux cleaned = 0.0167009 Jy ! Component: 2800 - total flux cleaned = 0.0168892 Jy ! Component: 2850 - total flux cleaned = 0.0170756 Jy ! Component: 2900 - total flux cleaned = 0.0172865 Jy ! Component: 2950 - total flux cleaned = 0.0175217 Jy ! Component: 3000 - total flux cleaned = 0.0177029 Jy ! Component: 3050 - total flux cleaned = 0.0179085 Jy ! Component: 3100 - total flux cleaned = 0.0181373 Jy ! Component: 3150 - total flux cleaned = 0.0183892 Jy ! Component: 3200 - total flux cleaned = 0.018639 Jy ! Component: 3250 - total flux cleaned = 0.0188124 Jy ! Component: 3300 - total flux cleaned = 0.019083 Jy ! Component: 3350 - total flux cleaned = 0.0193026 Jy ! Component: 3400 - total flux cleaned = 0.0195932 Jy ! Component: 3450 - total flux cleaned = 0.0198335 Jy ! Component: 3500 - total flux cleaned = 0.0200008 Jy ! Component: 3550 - total flux cleaned = 0.0202618 Jy ! Component: 3600 - total flux cleaned = 0.020521 Jy ! Component: 3650 - total flux cleaned = 0.0207549 Jy ! Component: 3700 - total flux cleaned = 0.0209639 Jy ! Component: 3750 - total flux cleaned = 0.0212414 Jy ! Component: 3800 - total flux cleaned = 0.021448 Jy ! Component: 3850 - total flux cleaned = 0.0216535 Jy ! Component: 3900 - total flux cleaned = 0.0218809 Jy ! Component: 3950 - total flux cleaned = 0.0220391 Jy ! Component: 4000 - total flux cleaned = 0.0221968 Jy ! Component: 4050 - total flux cleaned = 0.0224657 Jy ! Total flux subtracted in 4096 components = 0.0226665 Jy ! Clean residual min=-0.001290 max=0.001537 Jy/beam ! Clean residual mean=0.000013 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.173461 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 406 components and 0.173461 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J1534-2243_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.846 x 7.91 at -4.985 degrees (North through East) ! Clean map min=-0.0058824 max=0.06672 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1534-2243_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0667197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380685 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.71172 1.71172 3.42344 6.84689 13.6938 27.3876 54.7751 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 175.262 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1534-2243_S_uvs.log closed on Sat Feb 27 22:26:06 2016