! Started logfile: /scr/pima/rv102_uvs/J1407+2827_X_dfm.log on Sat Nov 9 10:19:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J1407+2827_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1407+2827_X_uva.fits ! AN table 1: 49 integrations on 1 of 1 possible baselines. ! AN table 2: 60 integrations on 3 of 3 possible baselines. ! AN table 3: 9 integrations on 3 of 3 possible baselines. ! AN table 4: 29 integrations on 1 of 1 possible baselines. ! AN table 5: 13 integrations on 1 of 1 possible baselines. ! AN table 6: 454 integrations on 6 of 6 possible baselines. ! AN table 7: 46 integrations on 3 of 3 possible baselines. ! AN table 8: 17 integrations on 6 of 6 possible baselines. ! AN table 9: 119 integrations on 10 of 10 possible baselines. ! AN table 10: 46 integrations on 3 of 3 possible baselines. ! AN table 11: 50 integrations on 15 of 15 possible baselines. ! AN table 12: 48 integrations on 6 of 6 possible baselines. ! AN table 13: 9 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.646209 visibilities/baseline/integration-bin. ! Found source: J1407+2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 15036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1407+2827_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 672 telescope corrections were flagged in sub-array 6. ! A total of 96 telescope corrections were flagged in sub-array 7. ! A total of 40 telescope corrections were flagged in sub-array 8. ! A total of 265 telescope corrections were flagged in sub-array 9. ! A total of 90 telescope corrections were flagged in sub-array 10. ! A total of 103 telescope corrections were flagged in sub-array 11. ! A total of 105 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 672 telescope corrections were flagged in sub-array 6. ! A total of 96 telescope corrections were flagged in sub-array 7. ! A total of 40 telescope corrections were flagged in sub-array 8. ! A total of 265 telescope corrections were flagged in sub-array 9. ! A total of 90 telescope corrections were flagged in sub-array 10. ! A total of 103 telescope corrections were flagged in sub-array 11. ! A total of 105 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 1354 telescope corrections were flagged in sub-array 6. ! A total of 96 telescope corrections were flagged in sub-array 7. ! A total of 40 telescope corrections were flagged in sub-array 8. ! A total of 305 telescope corrections were flagged in sub-array 9. ! A total of 138 telescope corrections were flagged in sub-array 10. ! A total of 143 telescope corrections were flagged in sub-array 11. ! A total of 147 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 180 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 1354 telescope corrections were flagged in sub-array 6. ! A total of 96 telescope corrections were flagged in sub-array 7. ! A total of 40 telescope corrections were flagged in sub-array 8. ! A total of 305 telescope corrections were flagged in sub-array 9. ! A total of 138 telescope corrections were flagged in sub-array 10. ! A total of 143 telescope corrections were flagged in sub-array 11. ! A total of 147 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! ! Fit before self-cal, rms=1.227996Jy sigma=12.915642 ! Fit after self-cal, rms=0.561162Jy sigma=5.604892 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9923 mas, bmaj=1.194 mas, bpa=18.15 degrees ! Estimated noise=1.07128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.440717 Jy ! Component: 100 - total flux cleaned = 0.620818 Jy ! Total flux subtracted in 100 components = 0.620818 Jy ! Clean residual min=-0.045511 max=0.088085 Jy/beam ! Clean residual mean=0.000406 rms=0.009387 Jy/beam ! Combined flux in latest and established models = 0.620818 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.620818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298384Jy sigma=3.037755 ! Fit after self-cal, rms=0.295724Jy sigma=3.018086 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106809 Jy ! Component: 100 - total flux cleaned = 0.173144 Jy ! Total flux subtracted in 100 components = 0.173144 Jy ! Clean residual min=-0.026364 max=0.045947 Jy/beam ! Clean residual mean=0.000302 rms=0.005917 Jy/beam ! Combined flux in latest and established models = 0.793962 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.793962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246885Jy sigma=2.377429 ! Fit after self-cal, rms=0.246156Jy sigma=2.368551 ! Inverting map ! Added new window around map position (-0.4, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515215 Jy ! Component: 100 - total flux cleaned = 0.0848085 Jy ! Total flux subtracted in 100 components = 0.0848085 Jy ! Clean residual min=-0.020706 max=0.029895 Jy/beam ! Clean residual mean=0.000251 rms=0.004716 Jy/beam ! Combined flux in latest and established models = 0.87877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.87877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232851Jy sigma=2.187785 ! Fit after self-cal, rms=0.231396Jy sigma=2.175773 ! Inverting map ! Added new window around map position (-5.2, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345433 Jy ! Component: 100 - total flux cleaned = 0.0575193 Jy ! Total flux subtracted in 100 components = 0.0575193 Jy ! Clean residual min=-0.016182 max=0.022415 Jy/beam ! Clean residual mean=0.000212 rms=0.003948 Jy/beam ! Combined flux in latest and established models = 0.936289 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.936289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225272Jy sigma=2.094243 ! Fit after self-cal, rms=0.224132Jy sigma=2.083420 ! Inverting map ! Added new window around map position (-7, -3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259642 Jy ! Component: 100 - total flux cleaned = 0.0436141 Jy ! Total flux subtracted in 100 components = 0.0436141 Jy ! Clean residual min=-0.014078 max=0.017993 Jy/beam ! Clean residual mean=0.000182 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 0.979903 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.979903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220426Jy sigma=2.033512 ! Fit after self-cal, rms=0.219791Jy sigma=2.028852 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=1.259 mas, bpa=22.01 degrees ! Estimated noise=0.75573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239532 Jy ! Component: 100 - total flux cleaned = 0.0395846 Jy ! Component: 150 - total flux cleaned = 0.0512215 Jy ! Component: 200 - total flux cleaned = 0.0600294 Jy ! Total flux subtracted in 200 components = 0.0600294 Jy ! Clean residual min=-0.010737 max=0.014677 Jy/beam ! Clean residual mean=0.000949 rms=0.003176 Jy/beam ! Combined flux in latest and established models = 1.03993 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 1.03993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216607Jy sigma=1.991153 ! Fit after self-cal, rms=0.216055Jy sigma=1.984676 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.034 x 1.259 at 22.01 degrees (North through East) ! Clean map min=-0.010107 max=0.5284 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MK 0.00* NY 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* NY 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KP 0.00* LA 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! A total of 588 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 1.01 NY 1.01 ON 0.97 WZ 0.94 ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.89 NL 1.41 SC 1.17 WZ 1.00 ! ! A total of 99 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.96 NY 1.06 ON 0.95 WF 1.07 ! WZ 0.92 ! ! A total of 48 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.92 NY 1.01 ON 1.05 SC 1.05 ! WF 0.97 WZ 0.97 ! ! A total of 27 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.97 NY 1.07 ON 1.02 WF 0.86 ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.95 HN 0.98 LA 0.97 NL 0.99 ! PT 0.89 SC 0.97 WF 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MK 0.00* NY 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* NY 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KP 0.00* LA 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! A total of 588 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.97 NY 1.02 ON 1.02 WZ 0.96 ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.04 NL 1.36 SC 1.38 WZ 1.00 ! ! A total of 99 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.95 NY 1.03 ON 1.00 WF 1.10 ! WZ 0.95 ! ! A total of 48 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.88 NY 1.03 ON 0.96 SC 1.08 ! WF 0.96 WZ 1.04 ! ! A total of 27 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.93 NY 1.04 ON 1.10 WF 0.91 ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.94 HN 0.96 LA 0.98 NL 0.99 ! PT 0.90 SC 1.00 WF 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* NY 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KP 0.00* LA 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! A total of 462 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.00 NL 1.40 SC 1.30 WZ 0.99 ! ! A total of 102 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 1.07 NY 1.00* ON 1.06 WF 1.18 ! WZ 0.93 ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 0.89 NY 1.00* ON 1.08 SC 1.08 ! WF 0.96 WZ 1.07 ! ! A total of 45 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.99 HN 1.04 LA 1.01 NL 1.02 ! PT 0.96 SC 0.98 WF 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* NY 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KP 0.00* LA 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! A total of 462 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.15 NL 1.33 SC 1.27 WZ 0.85 ! ! A total of 102 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 1.11 NY 1.00* ON 1.02 WF 1.05 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.03 NY 1.00* ON 1.13 SC 1.09 ! WF 0.93 WZ 1.12 ! ! A total of 45 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.01 HN 1.09 LA 1.01 NL 1.03 ! PT 0.95 SC 1.01 WF 0.89 ! ! ! Fit before self-cal, rms=0.216055Jy sigma=1.984676 ! Fit after self-cal, rms=0.213765Jy sigma=1.918880 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.18 mas, bpa=25.13 degrees ! Estimated noise=0.941163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745291 Jy ! Component: 100 - total flux cleaned = 0.00900583 Jy ! Component: 150 - total flux cleaned = 0.0103228 Jy ! Component: 200 - total flux cleaned = 0.0108925 Jy ! Total flux subtracted in 200 components = 0.0108925 Jy ! Clean residual min=-0.007971 max=0.008714 Jy/beam ! Clean residual mean=0.000226 rms=0.001890 Jy/beam ! Combined flux in latest and established models = 1.05083 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 1.05083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213235Jy sigma=1.911644 ! Fit after self-cal, rms=0.213671Jy sigma=1.909981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213671Jy sigma=1.909981 ! Fit after self-cal, rms=0.212845Jy sigma=1.904388 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.18 mas, bpa=25.1 degrees ! Estimated noise=0.940749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394488 Jy ! Component: 100 - total flux cleaned = 0.00492576 Jy ! Component: 150 - total flux cleaned = 0.00561315 Jy ! Component: 200 - total flux cleaned = 0.00591541 Jy ! Total flux subtracted in 200 components = 0.00591541 Jy ! Clean residual min=-0.007694 max=0.007159 Jy/beam ! Clean residual mean=0.000209 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 1.05674 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 1.05674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212531Jy sigma=1.900410 ! Fit after self-cal, rms=0.212466Jy sigma=1.899792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, 34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736915 Jy ! Component: 100 - total flux cleaned = 0.00862319 Jy ! Component: 150 - total flux cleaned = 0.00935939 Jy ! Component: 200 - total flux cleaned = 0.00949561 Jy ! Total flux subtracted in 200 components = 0.00949561 Jy ! Clean residual min=-0.007491 max=0.006365 Jy/beam ! Clean residual mean=0.000137 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 1.06624 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 1.06624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212118Jy sigma=1.895908 ! Fit after self-cal, rms=0.212216Jy sigma=1.895330 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212216Jy sigma=1.895330 ! Fit after self-cal, rms=0.211792Jy sigma=1.887224 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.178 mas, bpa=25.58 degrees ! Estimated noise=0.940068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514817 Jy ! Component: 100 - total flux cleaned = 0.00717115 Jy ! Component: 150 - total flux cleaned = 0.00819798 Jy ! Component: 200 - total flux cleaned = 0.0086566 Jy ! Total flux subtracted in 200 components = 0.0086566 Jy ! Clean residual min=-0.006305 max=0.005914 Jy/beam ! Clean residual mean=0.000147 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 1.07489 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 1.07489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211573Jy sigma=1.884971 ! Fit after self-cal, rms=0.211601Jy sigma=1.884635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178181 Jy ! Component: 100 - total flux cleaned = 0.00213264 Jy ! Component: 150 - total flux cleaned = 0.00255034 Jy ! Component: 200 - total flux cleaned = 0.00264751 Jy ! Total flux subtracted in 200 components = 0.00264751 Jy ! Clean residual min=-0.006032 max=0.005672 Jy/beam ! Clean residual mean=0.000126 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 1.07754 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 120 components and 1.07754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211482Jy sigma=1.883447 ! Fit after self-cal, rms=0.211490Jy sigma=1.883318 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211490Jy sigma=1.883318 ! Fit after self-cal, rms=0.211593Jy sigma=1.882940 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=2.353 mas, bpa=67.3 degrees ! Estimated noise=1.22439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392286 Jy ! Component: 100 - total flux cleaned = 0.0058647 Jy ! Component: 150 - total flux cleaned = 0.00635538 Jy ! Component: 200 - total flux cleaned = 0.0067781 Jy ! Total flux subtracted in 200 components = 0.0067781 Jy ! Clean residual min=-0.004351 max=0.005040 Jy/beam ! Clean residual mean=0.000354 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 1.08432 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 1.08432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211571Jy sigma=1.882575 ! Fit after self-cal, rms=0.211553Jy sigma=1.882396 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030561 Jy ! Component: 100 - total flux cleaned = 0.0043441 Jy ! Component: 150 - total flux cleaned = 0.00551801 Jy ! Component: 200 - total flux cleaned = 0.00602121 Jy ! Total flux subtracted in 200 components = 0.00602121 Jy ! Clean residual min=-0.003998 max=0.004299 Jy/beam ! Clean residual mean=0.000227 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 1.09034 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 164 components and 1.09034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211374Jy sigma=1.880754 ! Fit after self-cal, rms=0.211308Jy sigma=1.880536 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=1.177 mas, bpa=26.28 degrees ! Estimated noise=0.939499 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 1.177 at 26.28 degrees (North through East) ! Clean map min=-0.0051355 max=0.50224 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211308Jy sigma=1.880536 ! Fit after self-cal, rms=0.443958Jy sigma=1.472599 ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=1.157 mas, bpa=30.5 degrees ! Estimated noise=0.925576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319948 Jy ! Component: 100 - total flux cleaned = 0.00584652 Jy ! Component: 150 - total flux cleaned = 0.00817133 Jy ! Component: 200 - total flux cleaned = 0.00955893 Jy ! Total flux subtracted in 200 components = 0.00955893 Jy ! Clean residual min=-0.005045 max=0.004898 Jy/beam ! Clean residual mean=0.000108 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 1.0999 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 189 components and 1.0999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443722Jy sigma=1.470386 ! Fit after self-cal, rms=0.443673Jy sigma=1.470010 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135747 Jy ! Component: 100 - total flux cleaned = 0.00268962 Jy ! Component: 150 - total flux cleaned = 0.00305504 Jy ! Component: 200 - total flux cleaned = 0.00328387 Jy ! Total flux subtracted in 200 components = 0.00328387 Jy ! Clean residual min=-0.004676 max=0.004897 Jy/beam ! Clean residual mean=0.000084 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 1.10318 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 201 components and 1.10318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443504Jy sigma=1.468928 ! Fit after self-cal, rms=0.443463Jy sigma=1.468732 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443463Jy sigma=1.468732 ! Fit after self-cal, rms=0.552532Jy sigma=1.466245 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9686 mas, bmaj=1.129 mas, bpa=13.56 degrees ! Estimated noise=1.30672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401426 Jy ! Component: 100 - total flux cleaned = 0.582838 Jy ! Component: 150 - total flux cleaned = 0.698925 Jy ! Component: 200 - total flux cleaned = 0.776478 Jy ! Total flux subtracted in 200 components = 0.776478 Jy ! Clean residual min=-0.026156 max=0.042649 Jy/beam ! Clean residual mean=0.000380 rms=0.006074 Jy/beam ! Combined flux in latest and established models = 0.776478 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.776478 Jy ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.153 mas, bpa=29.84 degrees ! Estimated noise=0.921081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0772792 Jy ! Component: 100 - total flux cleaned = 0.130098 Jy ! Component: 150 - total flux cleaned = 0.168474 Jy ! Component: 200 - total flux cleaned = 0.197074 Jy ! Total flux subtracted in 200 components = 0.197074 Jy ! Clean residual min=-0.012001 max=0.016449 Jy/beam ! Clean residual mean=0.001099 rms=0.003318 Jy/beam ! Combined flux in latest and established models = 0.973551 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 0.973551 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217002 Jy ! Component: 100 - total flux cleaned = 0.038571 Jy ! Component: 150 - total flux cleaned = 0.0522928 Jy ! Component: 200 - total flux cleaned = 0.0636846 Jy ! Total flux subtracted in 200 components = 0.0636846 Jy ! Clean residual min=-0.006420 max=0.007407 Jy/beam ! Clean residual mean=0.000628 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 1.03724 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 1.03724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.165 mas, bmaj=2.342 mas, bpa=72.74 degrees ! Estimated noise=1.22322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172719 Jy ! Component: 100 - total flux cleaned = 0.0281863 Jy ! Component: 150 - total flux cleaned = 0.0364283 Jy ! Component: 200 - total flux cleaned = 0.0429136 Jy ! Total flux subtracted in 200 components = 0.0429136 Jy ! Clean residual min=-0.004720 max=0.005166 Jy/beam ! Clean residual mean=0.000829 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 1.08015 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523054 Jy ! Component: 100 - total flux cleaned = 0.00960173 Jy ! Component: 150 - total flux cleaned = 0.0133817 Jy ! Component: 200 - total flux cleaned = 0.0166777 Jy ! Total flux subtracted in 200 components = 0.0166777 Jy ! Clean residual min=-0.004078 max=0.004528 Jy/beam ! Clean residual mean=0.000497 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 1.09683 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 155 components and 1.09683 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.153 mas, bpa=29.84 degrees ! Estimated noise=0.921081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244279 Jy ! Component: 100 - total flux cleaned = 0.0043615 Jy ! Component: 150 - total flux cleaned = 0.0056553 Jy ! Component: 200 - total flux cleaned = 0.00685413 Jy ! Total flux subtracted in 200 components = 0.00685413 Jy ! Clean residual min=-0.005161 max=0.005196 Jy/beam ! Clean residual mean=0.000132 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 1.10368 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 181 components and 1.10368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552150Jy sigma=1.472813 ! Fit after self-cal, rms=0.551820Jy sigma=1.470615 wmodel J1407+2827_X_map.mod ! Writing 181 model components to file: J1407+2827_X_map.mod wobs J1407+2827_X_uvs.fits ! Writing UV FITS file: J1407+2827_X_uvs.fits wwins J1407+2827_X_map.win ! wwins: Wrote 6 windows to J1407+2827_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.40274e-05 Jy ! Component: 100 - total flux cleaned = 0.000297045 Jy ! Component: 150 - total flux cleaned = 0.000466405 Jy ! Component: 200 - total flux cleaned = 0.000631526 Jy ! Component: 250 - total flux cleaned = 0.000953252 Jy ! Component: 300 - total flux cleaned = 0.00134188 Jy ! Component: 350 - total flux cleaned = 0.00156987 Jy ! Component: 400 - total flux cleaned = 0.00171735 Jy ! Component: 450 - total flux cleaned = 0.00178958 Jy ! Component: 500 - total flux cleaned = 0.00207567 Jy ! Component: 550 - total flux cleaned = 0.00214508 Jy ! Component: 600 - total flux cleaned = 0.00214589 Jy ! Component: 650 - total flux cleaned = 0.00255222 Jy ! Component: 700 - total flux cleaned = 0.00255038 Jy ! Component: 750 - total flux cleaned = 0.00241845 Jy ! Component: 800 - total flux cleaned = 0.00241887 Jy ! Component: 850 - total flux cleaned = 0.00248275 Jy ! Component: 900 - total flux cleaned = 0.0023563 Jy ! Component: 950 - total flux cleaned = 0.00260389 Jy ! Component: 1000 - total flux cleaned = 0.00248092 Jy ! Component: 1050 - total flux cleaned = 0.00278325 Jy ! Component: 1100 - total flux cleaned = 0.00278297 Jy ! Component: 1150 - total flux cleaned = 0.00284262 Jy ! Component: 1200 - total flux cleaned = 0.00301783 Jy ! Component: 1250 - total flux cleaned = 0.00313406 Jy ! Component: 1300 - total flux cleaned = 0.00342112 Jy ! Component: 1350 - total flux cleaned = 0.00364745 Jy ! Component: 1400 - total flux cleaned = 0.00398412 Jy ! Component: 1450 - total flux cleaned = 0.00409508 Jy ! Component: 1500 - total flux cleaned = 0.00442611 Jy ! Component: 1550 - total flux cleaned = 0.00437065 Jy ! Component: 1600 - total flux cleaned = 0.0045876 Jy ! Component: 1650 - total flux cleaned = 0.00447992 Jy ! Component: 1700 - total flux cleaned = 0.00469414 Jy ! Component: 1750 - total flux cleaned = 0.00469422 Jy ! Component: 1800 - total flux cleaned = 0.00490421 Jy ! Component: 1850 - total flux cleaned = 0.00485163 Jy ! Component: 1900 - total flux cleaned = 0.00474809 Jy ! Component: 1950 - total flux cleaned = 0.00500529 Jy ! Component: 2000 - total flux cleaned = 0.005056 Jy ! Component: 2050 - total flux cleaned = 0.00500511 Jy ! Component: 2100 - total flux cleaned = 0.00495525 Jy ! Component: 2150 - total flux cleaned = 0.00505547 Jy ! Component: 2200 - total flux cleaned = 0.00520467 Jy ! Component: 2250 - total flux cleaned = 0.00520504 Jy ! Component: 2300 - total flux cleaned = 0.00535185 Jy ! Component: 2350 - total flux cleaned = 0.00559422 Jy ! Component: 2400 - total flux cleaned = 0.00544867 Jy ! Component: 2450 - total flux cleaned = 0.0053047 Jy ! Component: 2500 - total flux cleaned = 0.00549525 Jy ! Component: 2550 - total flux cleaned = 0.00549527 Jy ! Component: 2600 - total flux cleaned = 0.00544844 Jy ! Component: 2650 - total flux cleaned = 0.00549542 Jy ! Component: 2700 - total flux cleaned = 0.00558852 Jy ! Component: 2750 - total flux cleaned = 0.00563463 Jy ! Component: 2800 - total flux cleaned = 0.00545083 Jy ! Component: 2850 - total flux cleaned = 0.00563354 Jy ! Component: 2900 - total flux cleaned = 0.00567899 Jy ! Component: 2950 - total flux cleaned = 0.00576938 Jy ! Component: 3000 - total flux cleaned = 0.00567994 Jy ! Component: 3050 - total flux cleaned = 0.00599189 Jy ! Component: 3100 - total flux cleaned = 0.00590299 Jy ! Component: 3150 - total flux cleaned = 0.00612383 Jy ! Component: 3200 - total flux cleaned = 0.00621138 Jy ! Component: 3250 - total flux cleaned = 0.00616776 Jy ! Component: 3300 - total flux cleaned = 0.00634093 Jy ! Component: 3350 - total flux cleaned = 0.00638412 Jy ! Component: 3400 - total flux cleaned = 0.00659867 Jy ! Component: 3450 - total flux cleaned = 0.00642757 Jy ! Component: 3500 - total flux cleaned = 0.00668259 Jy ! Component: 3550 - total flux cleaned = 0.00672471 Jy ! Component: 3600 - total flux cleaned = 0.0071035 Jy ! Component: 3650 - total flux cleaned = 0.00706138 Jy ! Component: 3700 - total flux cleaned = 0.00722825 Jy ! Component: 3750 - total flux cleaned = 0.00718681 Jy ! Component: 3800 - total flux cleaned = 0.0073934 Jy ! Component: 3850 - total flux cleaned = 0.00743446 Jy ! Component: 3900 - total flux cleaned = 0.00755708 Jy ! Component: 3950 - total flux cleaned = 0.00763842 Jy ! Component: 4000 - total flux cleaned = 0.00776016 Jy ! Component: 4050 - total flux cleaned = 0.00784136 Jy ! Total flux subtracted in 4096 components = 0.00808243 Jy ! Clean residual min=-0.002490 max=0.002144 Jy/beam ! Clean residual mean=0.000050 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 1.11176 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 452 components and 1.11177 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J1407+2827_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 1.153 at 29.84 degrees (North through East) ! Clean map min=-0.0045602 max=0.49483 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1407+2827_X_map.fits wmodel /scr/pima/rv102_uvs/J1407+2827_X_map.mod ! Writing 452 model components to file: /scr/pima/rv102_uvs/J1407+2827_X_map.mod wobs /scr/pima/rv102_uvs/J1407+2827_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1407+2827_X_uvs.fits wwins /scr/pima/rv102_uvs/J1407+2827_X_map.win ! wwins: Wrote 7 windows to /scr/pima/rv102_uvs/J1407+2827_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.494833 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00064335 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390041 0.390041 0.780081 1.56016 3.12033 6.24065 12.4813 24.9626 49.9252 99.8504 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.494 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 769.15 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1407+2827_X_dfm.log closed on Sat Nov 9 10:20:03 2019