! Started logfile: /scr/pima/rv102_uvs/J1332+0200_X_uvs.log on Sat Feb 27 22:26:30 2016
obs /scr/pima/rv102_uvs/J1332+0200_X_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J1332+0200_X_uva.fits
! AN table 1: 9 integrations on 15 of 15 possible baselines.
! AN table 2: 122 integrations on 3 of 3 possible baselines.
! AN table 3: 349 integrations on 6 of 6 possible baselines.
! AN table 4: 108 integrations on 21 of 21 possible baselines.
! AN table 5: 56 integrations on 10 of 10 possible baselines.
! AN table 6: 56 integrations on 55 of 55 possible baselines.
! AN table 7: 9 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.501869 visibilities/baseline/integration-bin.
! Found source: J1332+0200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 17720 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1332+0200_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 892 telescope corrections were flagged in sub-array 3.
!  A total of 399 telescope corrections were flagged in sub-array 4.
!  A total of 128 telescope corrections were flagged in sub-array 5.
!  A total of 389 telescope corrections were flagged in sub-array 6.
!  A total of 19 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 892 telescope corrections were flagged in sub-array 3.
!  A total of 399 telescope corrections were flagged in sub-array 4.
!  A total of 128 telescope corrections were flagged in sub-array 5.
!  A total of 389 telescope corrections were flagged in sub-array 6.
!  A total of 19 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 1396 telescope corrections were flagged in sub-array 3.
!  A total of 590 telescope corrections were flagged in sub-array 4.
!  A total of 184 telescope corrections were flagged in sub-array 5.
!  A total of 445 telescope corrections were flagged in sub-array 6.
!  A total of 19 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 1396 telescope corrections were flagged in sub-array 3.
!  A total of 590 telescope corrections were flagged in sub-array 4.
!  A total of 184 telescope corrections were flagged in sub-array 5.
!  A total of 445 telescope corrections were flagged in sub-array 6.
!  A total of 19 telescope corrections were flagged in sub-array 7.
! 
! Fit before self-cal, rms=1.109616Jy  sigma=10.413923
! Fit after  self-cal, rms=0.690432Jy  sigma=6.915605
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5533 mas, bmaj=2.064 mas, bpa=-15.14 degrees
! Estimated noise=1.53922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218347 Jy
! Component: 100  -  total flux cleaned = 0.283758 Jy
! Total flux subtracted in 100 components = 0.283758 Jy
! Clean residual min=-0.036590 max=0.051030 Jy/beam
! Clean residual mean=-0.000081 rms=0.009539 Jy/beam
! Combined flux in latest and established models = 0.283758 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.283758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309187Jy  sigma=2.393188
! Fit after  self-cal, rms=0.308767Jy  sigma=2.390797
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.652 mas, bmaj=2.441 mas, bpa=-13.17 degrees
! Estimated noise=0.992786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0859079 Jy
! Component: 100  -  total flux cleaned = 0.121468 Jy
! Component: 150  -  total flux cleaned = 0.137909 Jy
! Component: 200  -  total flux cleaned = 0.138808 Jy
! Total flux subtracted in 200 components = 0.138808 Jy
! Clean residual min=-0.044963 max=0.045863 Jy/beam
! Clean residual mean=-0.002263 rms=0.009622 Jy/beam
! Combined flux in latest and established models = 0.422566 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 23 components and 0.422566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.280220Jy  sigma=2.184226
! Fit after  self-cal, rms=0.279829Jy  sigma=2.181676
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.652 x 2.441 at -13.17 degrees (North through East)
! Clean map  min=-0.042678  max=0.34479 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 504 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 504 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 96 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        0.00*    NY        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  A total of 51 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 96 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        0.00*    NY        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  A total of 51 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Fit before self-cal, rms=0.279829Jy  sigma=2.181676
! Fit after  self-cal, rms=0.261834Jy  sigma=2.235271
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.028076 Jy
! Component: 100  -  total flux cleaned = -0.0433447 Jy
! Component: 150  -  total flux cleaned = -0.0522757 Jy
! Component: 200  -  total flux cleaned = -0.0568014 Jy
! Total flux subtracted in 200 components = -0.0568014 Jy
! Clean residual min=-0.044772 max=0.040061 Jy/beam
! Clean residual mean=-0.002123 rms=0.010371 Jy/beam
! Combined flux in latest and established models = 0.365765 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.365765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259941Jy  sigma=2.194783
! Fit after  self-cal, rms=0.260121Jy  sigma=2.194163
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260121Jy  sigma=2.194163
! Fit after  self-cal, rms=0.260121Jy  sigma=2.194163
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00247752 Jy
! Component: 100  -  total flux cleaned = -0.00316464 Jy
! Component: 150  -  total flux cleaned = -0.00381011 Jy
! Component: 200  -  total flux cleaned = -0.00426759 Jy
! Total flux subtracted in 200 components = -0.00426759 Jy
! Clean residual min=-0.044906 max=0.039733 Jy/beam
! Clean residual mean=-0.002130 rms=0.010385 Jy/beam
! Combined flux in latest and established models = 0.361497 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.361497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259911Jy  sigma=2.192246
! Fit after  self-cal, rms=0.259930Jy  sigma=2.192035
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707722 Jy
! Component: 100  -  total flux cleaned = -0.00131325 Jy
! Component: 150  -  total flux cleaned = -0.00160108 Jy
! Component: 200  -  total flux cleaned = -0.00173406 Jy
! Total flux subtracted in 200 components = -0.00173406 Jy
! Clean residual min=-0.045099 max=0.039506 Jy/beam
! Clean residual mean=-0.002114 rms=0.010386 Jy/beam
! Combined flux in latest and established models = 0.359763 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 0.359763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259793Jy  sigma=2.190279
! Fit after  self-cal, rms=0.259794Jy  sigma=2.190139
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259794Jy  sigma=2.190139
! Fit after  self-cal, rms=0.259794Jy  sigma=2.190139
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.08164e-05 Jy
! Component: 100  -  total flux cleaned = -0.000222939 Jy
! Component: 150  -  total flux cleaned = -0.00049715 Jy
! Component: 200  -  total flux cleaned = -0.000501255 Jy
! Total flux subtracted in 200 components = -0.000501255 Jy
! Clean residual min=-0.044980 max=0.039367 Jy/beam
! Clean residual mean=-0.002109 rms=0.010376 Jy/beam
! Combined flux in latest and established models = 0.359262 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.359262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259665Jy  sigma=2.188638
! Fit after  self-cal, rms=0.259660Jy  sigma=2.188483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284106 Jy
! Component: 100  -  total flux cleaned = -0.000135436 Jy
! Component: 150  -  total flux cleaned = -0.000265709 Jy
! Component: 200  -  total flux cleaned = -0.000389473 Jy
! Total flux subtracted in 200 components = -0.000389473 Jy
! Clean residual min=-0.044852 max=0.039228 Jy/beam
! Clean residual mean=-0.002104 rms=0.010366 Jy/beam
! Combined flux in latest and established models = 0.358872 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.358872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259529Jy  sigma=2.187137
! Fit after  self-cal, rms=0.259520Jy  sigma=2.186972
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259520Jy  sigma=2.186972
! Fit after  self-cal, rms=0.259520Jy  sigma=2.186972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.555 mas, bmaj=3.272 mas, bpa=15.27 degrees
! Estimated noise=1.59775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00708149 Jy
! Component: 100  -  total flux cleaned = 0.00713577 Jy
! Component: 150  -  total flux cleaned = 0.00593687 Jy
! Component: 200  -  total flux cleaned = 0.00525071 Jy
! Total flux subtracted in 200 components = 0.00525071 Jy
! Clean residual min=-0.079167 max=0.066014 Jy/beam
! Clean residual mean=-0.005753 rms=0.021658 Jy/beam
! Combined flux in latest and established models = 0.364123 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 49 components and 0.364123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261437Jy  sigma=2.191464
! Fit after  self-cal, rms=0.261219Jy  sigma=2.190678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120795 Jy
! Component: 100  -  total flux cleaned = -0.000419063 Jy
! Component: 150  -  total flux cleaned = -0.000703535 Jy
! Component: 200  -  total flux cleaned = -0.000977391 Jy
! Total flux subtracted in 200 components = -0.000977391 Jy
! Clean residual min=-0.078100 max=0.065210 Jy/beam
! Clean residual mean=-0.005566 rms=0.021488 Jy/beam
! Combined flux in latest and established models = 0.363146 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.363146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.262125Jy  sigma=2.199502
! Fit after  self-cal, rms=0.261898Jy  sigma=2.199115
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6054 x 2.323 at -13.15 degrees (North through East)
! Clean map  min=-0.044019  max=0.30078 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5354 mas, bmaj=2.033 mas, bpa=-14.92 degrees
! Estimated noise=1.62154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.201126 Jy
! Component: 100  -  total flux cleaned = 0.259394 Jy
! Component: 150  -  total flux cleaned = 0.283541 Jy
! Component: 200  -  total flux cleaned = 0.291245 Jy
! Total flux subtracted in 200 components = 0.291245 Jy
! Clean residual min=-0.037442 max=0.042431 Jy/beam
! Clean residual mean=-0.000064 rms=0.008815 Jy/beam
! Combined flux in latest and established models = 0.291245 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.291245 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516593 Jy
! Component: 100  -  total flux cleaned = 0.0480869 Jy
! Component: 150  -  total flux cleaned = 0.0471499 Jy
! Component: 200  -  total flux cleaned = 0.0463356 Jy
! Total flux subtracted in 200 components = 0.0463356 Jy
! Clean residual min=-0.045427 max=0.039196 Jy/beam
! Clean residual mean=-0.001763 rms=0.010151 Jy/beam
! Combined flux in latest and established models = 0.33758 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.33758 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.555 mas, bmaj=3.272 mas, bpa=15.27 degrees
! Estimated noise=1.59775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00300187 Jy
! Component: 100  -  total flux cleaned = -0.00896921 Jy
! Component: 150  -  total flux cleaned = -0.0128007 Jy
! Component: 200  -  total flux cleaned = -0.0172152 Jy
! Total flux subtracted in 200 components = -0.0172152 Jy
! Clean residual min=-0.070857 max=0.061261 Jy/beam
! Clean residual mean=-0.004077 rms=0.019066 Jy/beam
! Combined flux in latest and established models = 0.320365 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00288186 Jy
! Component: 100  -  total flux cleaned = -0.0062637 Jy
! Component: 150  -  total flux cleaned = -0.00849254 Jy
! Component: 200  -  total flux cleaned = -0.010515 Jy
! Total flux subtracted in 200 components = -0.010515 Jy
! Clean residual min=-0.066521 max=0.057269 Jy/beam
! Clean residual mean=-0.003715 rms=0.017920 Jy/beam
! Combined flux in latest and established models = 0.30985 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 47 components and 0.30985 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6054 mas, bmaj=2.323 mas, bpa=-13.15 degrees
! Estimated noise=1.12817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00179023 Jy
! Component: 100  -  total flux cleaned = -0.00281488 Jy
! Component: 150  -  total flux cleaned = -0.00208068 Jy
! Component: 200  -  total flux cleaned = -0.00215099 Jy
! Total flux subtracted in 200 components = -0.00215099 Jy
! Clean residual min=-0.044381 max=0.035746 Jy/beam
! Clean residual mean=-0.001373 rms=0.009080 Jy/beam
! Combined flux in latest and established models = 0.307699 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.307699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253237Jy  sigma=2.100196
! Fit after  self-cal, rms=0.251033Jy  sigma=2.064215
wmodel /scr/pima/rv102_uvs/J1332+0200_X_map.mod
! Writing 66 model components to file: /scr/pima/rv102_uvs/J1332+0200_X_map.mod
wobs /scr/pima/rv102_uvs/J1332+0200_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J1332+0200_X_uvs.fits
wwins /scr/pima/rv102_uvs/J1332+0200_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J1332+0200_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0178392 Jy
! Component: 100  -  total flux cleaned = -0.0292843 Jy
! Component: 150  -  total flux cleaned = -0.034319 Jy
! Component: 200  -  total flux cleaned = -0.0385574 Jy
! Component: 250  -  total flux cleaned = -0.0400876 Jy
! Component: 300  -  total flux cleaned = -0.04106 Jy
! Component: 350  -  total flux cleaned = -0.041516 Jy
! Component: 400  -  total flux cleaned = -0.0419527 Jy
! Component: 450  -  total flux cleaned = -0.0423873 Jy
! Component: 500  -  total flux cleaned = -0.0423805 Jy
! Component: 550  -  total flux cleaned = -0.0427925 Jy
! Component: 600  -  total flux cleaned = -0.0431875 Jy
! Component: 650  -  total flux cleaned = -0.0431825 Jy
! Component: 700  -  total flux cleaned = -0.0439386 Jy
! Component: 750  -  total flux cleaned = -0.0443105 Jy
! Component: 800  -  total flux cleaned = -0.0453927 Jy
! Component: 850  -  total flux cleaned = -0.0446874 Jy
! Component: 900  -  total flux cleaned = -0.0443468 Jy
! Component: 950  -  total flux cleaned = -0.0443561 Jy
! Component: 1000  -  total flux cleaned = -0.0446936 Jy
! Component: 1050  -  total flux cleaned = -0.0446939 Jy
! Component: 1100  -  total flux cleaned = -0.0446939 Jy
! Component: 1150  -  total flux cleaned = -0.0450067 Jy
! Component: 1200  -  total flux cleaned = -0.045314 Jy
! Component: 1250  -  total flux cleaned = -0.0450103 Jy
! Component: 1300  -  total flux cleaned = -0.0456096 Jy
! Component: 1350  -  total flux cleaned = -0.0453156 Jy
! Component: 1400  -  total flux cleaned = -0.0456074 Jy
! Component: 1450  -  total flux cleaned = -0.0458885 Jy
! Component: 1500  -  total flux cleaned = -0.0464423 Jy
! Component: 1550  -  total flux cleaned = -0.0469891 Jy
! Component: 1600  -  total flux cleaned = -0.0475299 Jy
! Component: 1650  -  total flux cleaned = -0.0480597 Jy
! Component: 1700  -  total flux cleaned = -0.0480607 Jy
! Component: 1750  -  total flux cleaned = -0.0488324 Jy
! Component: 1800  -  total flux cleaned = -0.0493426 Jy
! Component: 1850  -  total flux cleaned = -0.0503448 Jy
! Component: 1900  -  total flux cleaned = -0.0505892 Jy
! Component: 1950  -  total flux cleaned = -0.0515639 Jy
! Component: 2000  -  total flux cleaned = -0.0518077 Jy
! Component: 2050  -  total flux cleaned = -0.0527575 Jy
! Component: 2100  -  total flux cleaned = -0.0532274 Jy
! Component: 2150  -  total flux cleaned = -0.0541497 Jy
! Component: 2200  -  total flux cleaned = -0.0546029 Jy
! Component: 2250  -  total flux cleaned = -0.0550562 Jy
! Component: 2300  -  total flux cleaned = -0.0561688 Jy
! Component: 2350  -  total flux cleaned = -0.0570473 Jy
! Component: 2400  -  total flux cleaned = -0.0576984 Jy
! Component: 2450  -  total flux cleaned = -0.0583416 Jy
! Component: 2500  -  total flux cleaned = -0.0589789 Jy
! Component: 2550  -  total flux cleaned = -0.0600231 Jy
! Component: 2600  -  total flux cleaned = -0.0610537 Jy
! Component: 2650  -  total flux cleaned = -0.0616639 Jy
! Component: 2700  -  total flux cleaned = -0.0620666 Jy
! Component: 2750  -  total flux cleaned = -0.0626646 Jy
! Component: 2800  -  total flux cleaned = -0.0632565 Jy
! Component: 2850  -  total flux cleaned = -0.0644286 Jy
! Component: 2900  -  total flux cleaned = -0.0644299 Jy
! Component: 2950  -  total flux cleaned = -0.065387 Jy
! Component: 3000  -  total flux cleaned = -0.0655755 Jy
! Component: 3050  -  total flux cleaned = -0.0663261 Jy
! Component: 3100  -  total flux cleaned = -0.0666968 Jy
! Component: 3150  -  total flux cleaned = -0.0668831 Jy
! Component: 3200  -  total flux cleaned = -0.0677924 Jy
! Component: 3250  -  total flux cleaned = -0.0679732 Jy
! Component: 3300  -  total flux cleaned = -0.0683303 Jy
! Component: 3350  -  total flux cleaned = -0.0686823 Jy
! Component: 3400  -  total flux cleaned = -0.0686831 Jy
! Component: 3450  -  total flux cleaned = -0.0692032 Jy
! Component: 3500  -  total flux cleaned = -0.0695482 Jy
! Component: 3550  -  total flux cleaned = -0.0698901 Jy
! Component: 3600  -  total flux cleaned = -0.0700594 Jy
! Component: 3650  -  total flux cleaned = -0.0705617 Jy
! Component: 3700  -  total flux cleaned = -0.0705609 Jy
! Component: 3750  -  total flux cleaned = -0.0710538 Jy
! Component: 3800  -  total flux cleaned = -0.0710538 Jy
! Component: 3850  -  total flux cleaned = -0.0710536 Jy
! Component: 3900  -  total flux cleaned = -0.0713754 Jy
! Component: 3950  -  total flux cleaned = -0.071693 Jy
! Component: 4000  -  total flux cleaned = -0.0716912 Jy
! Component: 4050  -  total flux cleaned = -0.0721588 Jy
! Total flux subtracted in 4096 components = -0.0721574 Jy
! Clean residual min=-0.008558 max=0.009267 Jy/beam
! Clean residual mean=-0.000407 rms=0.002828 Jy/beam
! Combined flux in latest and established models = 0.235542 Jy
keep
! Adding 330 model components to the UV plane model.
! The established model now contains 396 components and 0.235542 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J1332+0200_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6054 x 2.323 at -13.15 degrees (North through East)
! Clean map  min=-0.061312  max=0.2849 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1332+0200_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.284902 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00281972 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.96914 2.96914 5.93829 11.8766 23.7532 47.5063 95.0126
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0084 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.284 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  101.039 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J1332+0200_X_uvs.log closed on Sat Feb 27 22:26:35 2016