! Started logfile: /scr/pima/rv102_uvs/J1332+0200_X_dfm.log on Sat Nov 9 10:19:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J1332+0200_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1332+0200_X_uva.fits ! AN table 1: 9 integrations on 10 of 10 possible baselines. ! AN table 2: 121 integrations on 3 of 3 possible baselines. ! AN table 3: 349 integrations on 6 of 6 possible baselines. ! AN table 4: 109 integrations on 21 of 21 possible baselines. ! AN table 5: 56 integrations on 10 of 10 possible baselines. ! AN table 6: 56 integrations on 55 of 55 possible baselines. ! AN table 7: 9 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.609303 visibilities/baseline/integration-bin. ! Found source: J1332+0200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 21272 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1332+0200_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! A total of 240 telescope corrections were flagged in sub-array 3. ! A total of 304 telescope corrections were flagged in sub-array 4. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 302 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! A total of 240 telescope corrections were flagged in sub-array 3. ! A total of 304 telescope corrections were flagged in sub-array 4. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 302 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! A total of 763 telescope corrections were flagged in sub-array 3. ! A total of 429 telescope corrections were flagged in sub-array 4. ! A total of 129 telescope corrections were flagged in sub-array 5. ! A total of 390 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! A total of 763 telescope corrections were flagged in sub-array 3. ! A total of 429 telescope corrections were flagged in sub-array 4. ! A total of 129 telescope corrections were flagged in sub-array 5. ! A total of 390 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.154649Jy sigma=13.164404 ! Fit after self-cal, rms=0.582807Jy sigma=6.422259 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.5357 mas, bmaj=1.954 mas, bpa=-13.09 degrees ! Estimated noise=0.828977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326729 Jy ! Component: 100 - total flux cleaned = 0.440348 Jy ! Total flux subtracted in 100 components = 0.440348 Jy ! Clean residual min=-0.017308 max=0.050582 Jy/beam ! Clean residual mean=0.000213 rms=0.004138 Jy/beam ! Combined flux in latest and established models = 0.440348 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.440348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249031Jy sigma=2.475359 ! Fit after self-cal, rms=0.248866Jy sigma=2.471598 ! Inverting map ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553755 Jy ! Component: 100 - total flux cleaned = 0.0821741 Jy ! Total flux subtracted in 100 components = 0.0821741 Jy ! Clean residual min=-0.010929 max=0.022531 Jy/beam ! Clean residual mean=0.000153 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 0.522522 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.522522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231737Jy sigma=2.206619 ! Fit after self-cal, rms=0.231715Jy sigma=2.205528 ! Inverting map ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (-1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215528 Jy ! Component: 100 - total flux cleaned = 0.0337192 Jy ! Total flux subtracted in 100 components = 0.0337192 Jy ! Clean residual min=-0.009626 max=0.014411 Jy/beam ! Clean residual mean=0.000128 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 0.556241 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.556241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228730Jy sigma=2.153619 ! Fit after self-cal, rms=0.228424Jy sigma=2.149745 ! Inverting map ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.7379 mas, bmaj=2.299 mas, bpa=-11.53 degrees ! Estimated noise=0.554039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185924 Jy ! Component: 100 - total flux cleaned = 0.0283966 Jy ! Component: 150 - total flux cleaned = 0.0345166 Jy ! Component: 200 - total flux cleaned = 0.0359563 Jy ! Total flux subtracted in 200 components = 0.0359563 Jy ! Clean residual min=-0.012589 max=0.017563 Jy/beam ! Clean residual mean=0.000472 rms=0.003807 Jy/beam ! Combined flux in latest and established models = 0.592197 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.592197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227086Jy sigma=2.126264 ! Fit after self-cal, rms=0.227103Jy sigma=2.124405 ! Inverting map ! Your choice of large map pixels excluded 0.433% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7379 x 2.299 at -11.53 degrees (North through East) ! Clean map min=-0.012603 max=0.45261 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.01 LA 0.93 MK 1.24 ! PT 1.06 ! ! A total of 255 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 276 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.99 NY 1.03 ON 1.01 WZ 0.93 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.10 MA 0.96 NY 1.02 ON 1.00 ! SC 0.97 WF 0.99 WZ 0.96 ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 2.70 NY 0.98 ON 1.02 WF 0.93 ! WZ 0.98 ! ! A total of 48 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 HN 0.95 KP 1.02 LA 1.06 ! MA 0.96 NY 1.04 ON 0.99 PT 1.06 ! SC 0.97 WF 0.92 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 0.94 LA 1.00 MK 1.05 ! NL 1.09 PT 1.06 SC 0.99 WF 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.95 LA 0.98 MK 1.02 ! PT 1.00 ! ! A total of 255 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 276 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.94 NY 1.04 ON 1.01 WZ 0.96 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.01 MA 0.93 NY 1.01 ON 0.98 ! SC 1.02 WF 0.97 WZ 0.95 ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 2.55 NY 1.03 ON 1.05 WF 0.90 ! WZ 0.97 ! ! A total of 48 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HN 0.97 KP 1.06 LA 1.02 ! MA 0.96 NY 0.96 ON 1.02 PT 1.06 ! SC 0.92 WF 0.89 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 1.01 LA 1.00 MK 1.04 ! NL 1.09 PT 1.03 SC 0.97 WF 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.95 LA 0.96 MK 0.91 ! PT 1.04 ! ! A total of 255 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 633 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.93 MA 1.02 NY 1.00* ON 0.95 ! SC 0.96 WF 1.03 WZ 0.96 ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 2.35 NY 1.00* ON 0.91 WF 0.89 ! WZ 1.10 ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 0.94 HN 0.98 KP 1.03 LA 1.00 ! MA 1.06 NY 1.00* ON 1.05 PT 1.04 ! SC 0.89 WF 0.88 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 1.01 LA 1.00 MK 0.94 ! NL 1.02 PT 1.00 SC 0.98 WF 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.95 LA 1.02 MK 1.13 ! PT 0.99 ! ! A total of 255 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 633 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.99 MA 1.05 NY 1.00* ON 0.99 ! SC 0.95 WF 0.89 WZ 0.90 ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 2.97 NY 1.00* ON 1.00 WF 0.82 ! WZ 1.02 ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00 HN 1.01 KP 1.02 LA 0.96 ! MA 1.08 NY 1.00* ON 1.00 PT 1.00 ! SC 0.95 WF 0.88 WZ 0.93 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.92 HN 0.94 LA 1.00 MK 0.97 ! NL 1.05 PT 1.08 SC 0.97 WF 0.94 ! ! ! Fit before self-cal, rms=0.227103Jy sigma=2.124405 ! Fit after self-cal, rms=0.250955Jy sigma=1.994694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6532 mas, bmaj=2.232 mas, bpa=-11.4 degrees ! Estimated noise=0.619275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296845 Jy ! Component: 100 - total flux cleaned = 0.00270569 Jy ! Component: 150 - total flux cleaned = 0.00228718 Jy ! Component: 200 - total flux cleaned = 0.00195327 Jy ! Total flux subtracted in 200 components = 0.00195327 Jy ! Clean residual min=-0.005633 max=0.006027 Jy/beam ! Clean residual mean=0.000240 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.594151 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.594151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250772Jy sigma=1.992720 ! Fit after self-cal, rms=0.251858Jy sigma=1.991333 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251858Jy sigma=1.991333 ! Fit after self-cal, rms=0.254122Jy sigma=1.984132 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6521 mas, bmaj=2.234 mas, bpa=-11.39 degrees ! Estimated noise=0.620397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150733 Jy ! Component: 100 - total flux cleaned = 0.00124655 Jy ! Component: 150 - total flux cleaned = 0.000987843 Jy ! Component: 200 - total flux cleaned = 0.000943966 Jy ! Total flux subtracted in 200 components = 0.000943966 Jy ! Clean residual min=-0.004972 max=0.005446 Jy/beam ! Clean residual mean=0.000198 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.595095 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.595095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254076Jy sigma=1.983671 ! Fit after self-cal, rms=0.254134Jy sigma=1.983598 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.2, 44.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439985 Jy ! Component: 100 - total flux cleaned = 0.00386171 Jy ! Component: 150 - total flux cleaned = 0.00392666 Jy ! Component: 200 - total flux cleaned = 0.00398559 Jy ! Total flux subtracted in 200 components = 0.00398559 Jy ! Clean residual min=-0.004749 max=0.005454 Jy/beam ! Clean residual mean=0.000181 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.59908 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.59908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254015Jy sigma=1.982431 ! Fit after self-cal, rms=0.254026Jy sigma=1.982233 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (-6.4, 21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230155 Jy ! Component: 100 - total flux cleaned = 0.00242064 Jy ! Component: 150 - total flux cleaned = 0.00241449 Jy ! Component: 200 - total flux cleaned = 0.00226081 Jy ! Total flux subtracted in 200 components = 0.00226081 Jy ! Clean residual min=-0.004621 max=0.005119 Jy/beam ! Clean residual mean=0.000165 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.601341 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 0.601341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253898Jy sigma=1.980814 ! Fit after self-cal, rms=0.253905Jy sigma=1.980650 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (-47.2, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251878 Jy ! Component: 100 - total flux cleaned = 0.00222053 Jy ! Component: 150 - total flux cleaned = 0.0021367 Jy ! Component: 200 - total flux cleaned = 0.00228392 Jy ! Total flux subtracted in 200 components = 0.00228392 Jy ! Clean residual min=-0.004610 max=0.005158 Jy/beam ! Clean residual mean=0.000150 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.603625 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 0.603625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253786Jy sigma=1.979452 ! Fit after self-cal, rms=0.253733Jy sigma=1.979308 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (7.4, -26.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400322 Jy ! Component: 100 - total flux cleaned = 0.00470848 Jy ! Component: 150 - total flux cleaned = 0.00503354 Jy ! Component: 200 - total flux cleaned = 0.00510708 Jy ! Total flux subtracted in 200 components = 0.00510708 Jy ! Clean residual min=-0.004408 max=0.004703 Jy/beam ! Clean residual mean=0.000117 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.608732 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 0.608732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253626Jy sigma=1.977843 ! Fit after self-cal, rms=0.253639Jy sigma=1.977696 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (-15.2, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380711 Jy ! Component: 100 - total flux cleaned = 0.0039794 Jy ! Component: 150 - total flux cleaned = 0.00435191 Jy ! Component: 200 - total flux cleaned = 0.00469757 Jy ! Total flux subtracted in 200 components = 0.00469757 Jy ! Clean residual min=-0.004246 max=0.004071 Jy/beam ! Clean residual mean=0.000080 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.613429 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 137 components and 0.613429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253541Jy sigma=1.976554 ! Fit after self-cal, rms=0.253528Jy sigma=1.976442 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253528Jy sigma=1.976442 ! Fit after self-cal, rms=0.263165Jy sigma=1.971000 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6512 mas, bmaj=2.236 mas, bpa=-11.4 degrees ! Estimated noise=0.620869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283227 Jy ! Component: 100 - total flux cleaned = -0.000721508 Jy ! Component: 150 - total flux cleaned = -0.000877889 Jy ! Component: 200 - total flux cleaned = -0.00124234 Jy ! Total flux subtracted in 200 components = -0.00124234 Jy ! Clean residual min=-0.003629 max=0.003875 Jy/beam ! Clean residual mean=-0.000058 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.612187 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 159 components and 0.612187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263090Jy sigma=1.970367 ! Fit after self-cal, rms=0.263093Jy sigma=1.970264 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016109 Jy ! Component: 100 - total flux cleaned = 0.00126766 Jy ! Component: 150 - total flux cleaned = 0.000966893 Jy ! Component: 200 - total flux cleaned = 0.000613825 Jy ! Total flux subtracted in 200 components = 0.000613825 Jy ! Clean residual min=-0.003476 max=0.003435 Jy/beam ! Clean residual mean=-0.000066 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.612801 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 185 components and 0.612801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263020Jy sigma=1.969260 ! Fit after self-cal, rms=0.263000Jy sigma=1.969205 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263000Jy sigma=1.969205 ! Fit after self-cal, rms=0.262717Jy sigma=1.969050 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=2.643 mas, bmaj=2.872 mas, bpa=-43.06 degrees ! Estimated noise=0.81632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237508 Jy ! Component: 100 - total flux cleaned = -0.0038175 Jy ! Component: 150 - total flux cleaned = -0.00494431 Jy ! Component: 200 - total flux cleaned = -0.00576344 Jy ! Total flux subtracted in 200 components = -0.00576344 Jy ! Clean residual min=-0.003618 max=0.003284 Jy/beam ! Clean residual mean=-0.000065 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.607038 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 196 components and 0.607038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262672Jy sigma=1.968944 ! Fit after self-cal, rms=0.262626Jy sigma=1.968893 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117533 Jy ! Component: 100 - total flux cleaned = -0.00168425 Jy ! Component: 150 - total flux cleaned = -0.00214972 Jy ! Component: 200 - total flux cleaned = -0.00262542 Jy ! Total flux subtracted in 200 components = -0.00262542 Jy ! Clean residual min=-0.003547 max=0.003289 Jy/beam ! Clean residual mean=-0.000024 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.604412 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 205 components and 0.604412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262601Jy sigma=1.968909 ! Fit after self-cal, rms=0.262594Jy sigma=1.968897 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6509 mas, bmaj=2.236 mas, bpa=-11.4 degrees ! Estimated noise=0.621078 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6509 x 2.236 at -11.4 degrees (North through East) ! Clean map min=-0.003664 max=0.43171 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.5209 mas, bmaj=1.957 mas, bpa=-13.24 degrees ! Estimated noise=0.866456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31656 Jy ! Component: 100 - total flux cleaned = 0.432034 Jy ! Component: 150 - total flux cleaned = 0.488664 Jy ! Component: 200 - total flux cleaned = 0.520607 Jy ! Total flux subtracted in 200 components = 0.520607 Jy ! Clean residual min=-0.009452 max=0.016877 Jy/beam ! Clean residual mean=0.000101 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.520607 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.520607 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6509 mas, bmaj=2.236 mas, bpa=-11.4 degrees ! Estimated noise=0.621078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315589 Jy ! Component: 100 - total flux cleaned = 0.04816 Jy ! Component: 150 - total flux cleaned = 0.0581564 Jy ! Component: 200 - total flux cleaned = 0.065776 Jy ! Total flux subtracted in 200 components = 0.065776 Jy ! Clean residual min=-0.005148 max=0.005410 Jy/beam ! Clean residual mean=0.000147 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.586383 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 40 components and 0.586383 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Added new window around map position (1.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643663 Jy ! Component: 100 - total flux cleaned = 0.011092 Jy ! Component: 150 - total flux cleaned = 0.0148622 Jy ! Component: 200 - total flux cleaned = 0.017197 Jy ! Total flux subtracted in 200 components = 0.017197 Jy ! Clean residual min=-0.004633 max=0.003923 Jy/beam ! Clean residual mean=0.000011 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.60358 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 67 components and 0.60358 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=2.643 mas, bmaj=2.872 mas, bpa=-43.06 degrees ! Estimated noise=0.81632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291709 Jy ! Component: 100 - total flux cleaned = 0.00331728 Jy ! Component: 150 - total flux cleaned = 0.00300937 Jy ! Component: 200 - total flux cleaned = 0.00300445 Jy ! Total flux subtracted in 200 components = 0.00300445 Jy ! Clean residual min=-0.004283 max=0.004151 Jy/beam ! Clean residual mean=-0.000048 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.606584 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254774 Jy ! Component: 100 - total flux cleaned = 0.00019363 Jy ! Component: 150 - total flux cleaned = 0.000392306 Jy ! Component: 200 - total flux cleaned = 0.000485542 Jy ! Total flux subtracted in 200 components = 0.000485542 Jy ! Clean residual min=-0.004095 max=0.003629 Jy/beam ! Clean residual mean=-0.000064 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.607069 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 107 components and 0.607069 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! Estimated beam: bmin=0.6509 mas, bmaj=2.236 mas, bpa=-11.4 degrees ! Estimated noise=0.621078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296484 Jy ! Component: 100 - total flux cleaned = 0.0005376 Jy ! Component: 150 - total flux cleaned = 0.00120896 Jy ! Component: 200 - total flux cleaned = 0.00152584 Jy ! Total flux subtracted in 200 components = 0.00152584 Jy ! Clean residual min=-0.003710 max=0.003734 Jy/beam ! Clean residual mean=-0.000042 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.608595 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 129 components and 0.608595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262682Jy sigma=1.971124 ! Fit after self-cal, rms=0.262544Jy sigma=1.970803 wmodel J1332+0200_X_map.mod ! Writing 129 model components to file: J1332+0200_X_map.mod wobs J1332+0200_X_uvs.fits ! Writing UV FITS file: J1332+0200_X_uvs.fits wwins J1332+0200_X_map.win ! wwins: Wrote 9 windows to J1332+0200_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011806 Jy ! Component: 100 - total flux cleaned = -0.00131135 Jy ! Component: 150 - total flux cleaned = -0.00124791 Jy ! Component: 200 - total flux cleaned = -0.00161435 Jy ! Component: 250 - total flux cleaned = -0.00196957 Jy ! Component: 300 - total flux cleaned = -0.00237513 Jy ! Component: 350 - total flux cleaned = -0.0028288 Jy ! Component: 400 - total flux cleaned = -0.00327355 Jy ! Component: 450 - total flux cleaned = -0.00365547 Jy ! Component: 500 - total flux cleaned = -0.00408502 Jy ! Component: 550 - total flux cleaned = -0.00450783 Jy ! Component: 600 - total flux cleaned = -0.00497606 Jy ! Component: 650 - total flux cleaned = -0.00533558 Jy ! Component: 700 - total flux cleaned = -0.00569054 Jy ! Component: 750 - total flux cleaned = -0.0059411 Jy ! Component: 800 - total flux cleaned = -0.00613906 Jy ! Component: 850 - total flux cleaned = -0.00643131 Jy ! Component: 900 - total flux cleaned = -0.0065761 Jy ! Component: 950 - total flux cleaned = -0.00667132 Jy ! Component: 1000 - total flux cleaned = -0.00690711 Jy ! Component: 1050 - total flux cleaned = -0.0069062 Jy ! Component: 1100 - total flux cleaned = -0.00695214 Jy ! Component: 1150 - total flux cleaned = -0.00690632 Jy ! Component: 1200 - total flux cleaned = -0.00717959 Jy ! Component: 1250 - total flux cleaned = -0.00726945 Jy ! Component: 1300 - total flux cleaned = -0.00731409 Jy ! Component: 1350 - total flux cleaned = -0.00744716 Jy ! Component: 1400 - total flux cleaned = -0.0075355 Jy ! Component: 1450 - total flux cleaned = -0.00757945 Jy ! Component: 1500 - total flux cleaned = -0.00779662 Jy ! Component: 1550 - total flux cleaned = -0.00783957 Jy ! Component: 1600 - total flux cleaned = -0.00788246 Jy ! Component: 1650 - total flux cleaned = -0.0081374 Jy ! Component: 1700 - total flux cleaned = -0.00826344 Jy ! Component: 1750 - total flux cleaned = -0.00838868 Jy ! Component: 1800 - total flux cleaned = -0.00843007 Jy ! Component: 1850 - total flux cleaned = -0.00851282 Jy ! Component: 1900 - total flux cleaned = -0.00867729 Jy ! Component: 1950 - total flux cleaned = -0.00879931 Jy ! Component: 2000 - total flux cleaned = -0.00883989 Jy ! Component: 2050 - total flux cleaned = -0.00892092 Jy ! Component: 2100 - total flux cleaned = -0.009121 Jy ! Component: 2150 - total flux cleaned = -0.00931992 Jy ! Component: 2200 - total flux cleaned = -0.00928015 Jy ! Component: 2250 - total flux cleaned = -0.00943732 Jy ! Component: 2300 - total flux cleaned = -0.00947638 Jy ! Component: 2350 - total flux cleaned = -0.00959297 Jy ! Component: 2400 - total flux cleaned = -0.00951599 Jy ! Component: 2450 - total flux cleaned = -0.00955458 Jy ! Component: 2500 - total flux cleaned = -0.00982248 Jy ! Component: 2550 - total flux cleaned = -0.00982229 Jy ! Component: 2600 - total flux cleaned = -0.00978443 Jy ! Component: 2650 - total flux cleaned = -0.00993523 Jy ! Component: 2700 - total flux cleaned = -0.00989748 Jy ! Component: 2750 - total flux cleaned = -0.00993492 Jy ! Component: 2800 - total flux cleaned = -0.00997198 Jy ! Component: 2850 - total flux cleaned = -0.0100088 Jy ! Component: 2900 - total flux cleaned = -0.0100824 Jy ! Component: 2950 - total flux cleaned = -0.010119 Jy ! Component: 3000 - total flux cleaned = -0.0101189 Jy ! Component: 3050 - total flux cleaned = -0.010119 Jy ! Component: 3100 - total flux cleaned = -0.0101913 Jy ! Component: 3150 - total flux cleaned = -0.010263 Jy ! Component: 3200 - total flux cleaned = -0.0102988 Jy ! Component: 3250 - total flux cleaned = -0.0102275 Jy ! Component: 3300 - total flux cleaned = -0.0102631 Jy ! Component: 3350 - total flux cleaned = -0.0102983 Jy ! Component: 3400 - total flux cleaned = -0.0104039 Jy ! Component: 3450 - total flux cleaned = -0.010439 Jy ! Component: 3500 - total flux cleaned = -0.0105091 Jy ! Component: 3550 - total flux cleaned = -0.0106135 Jy ! Component: 3600 - total flux cleaned = -0.0106829 Jy ! Component: 3650 - total flux cleaned = -0.0106484 Jy ! Component: 3700 - total flux cleaned = -0.0107172 Jy ! Component: 3750 - total flux cleaned = -0.0108198 Jy ! Component: 3800 - total flux cleaned = -0.01082 Jy ! Component: 3850 - total flux cleaned = -0.0108879 Jy ! Component: 3900 - total flux cleaned = -0.0110907 Jy ! Component: 3950 - total flux cleaned = -0.0110908 Jy ! Component: 4000 - total flux cleaned = -0.0111244 Jy ! Component: 4050 - total flux cleaned = -0.0111913 Jy ! Total flux subtracted in 4096 components = -0.0113909 Jy ! Clean residual min=-0.002784 max=0.002336 Jy/beam ! Clean residual mean=-0.000012 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.597205 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 428 components and 0.597204 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J1332+0200_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6509 x 2.236 at -11.4 degrees (North through East) ! Clean map min=-0.0037636 max=0.43148 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1332+0200_X_map.fits wmodel /scr/pima/rv102_uvs/J1332+0200_X_map.mod ! Writing 428 model components to file: /scr/pima/rv102_uvs/J1332+0200_X_map.mod wobs /scr/pima/rv102_uvs/J1332+0200_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1332+0200_X_uvs.fits wwins /scr/pima/rv102_uvs/J1332+0200_X_map.win ! wwins: Wrote 10 windows to /scr/pima/rv102_uvs/J1332+0200_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.431479 invert ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The x-axis pixel size should ideally be below 0.1947 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000573136 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.398492 0.398492 0.796983 1.59397 3.18793 6.37586 12.7517 25.5035 51.0069 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.431 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 752.839 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1332+0200_X_dfm.log closed on Sat Nov 9 10:19:45 2019