! Started logfile: /scr/pima/rv102_uvs/J1332+0200_S_uvs.log on Sat Feb 27 22:25:41 2016
obs /scr/pima/rv102_uvs/J1332+0200_S_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J1332+0200_S_uva.fits
! AN table 1: 2 integrations on 15 of 15 possible baselines.
! AN table 2: 30 integrations on 3 of 3 possible baselines.
! AN table 3: 84 integrations on 6 of 6 possible baselines.
! AN table 4: 26 integrations on 21 of 21 possible baselines.
! AN table 5: 14 integrations on 10 of 10 possible baselines.
! AN table 6: 14 integrations on 55 of 55 possible baselines.
! AN table 7: 2 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.540892 visibilities/baseline/integration-bin.
! Found source: J1332+0200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 4656 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1332+0200_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 90 telescope corrections were flagged in sub-array 2.
!  A total of 210 telescope corrections were flagged in sub-array 3.
!  A total of 88 telescope corrections were flagged in sub-array 4.
!  A total of 32 telescope corrections were flagged in sub-array 5.
!  A total of 90 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 90 telescope corrections were flagged in sub-array 2.
!  A total of 210 telescope corrections were flagged in sub-array 3.
!  A total of 88 telescope corrections were flagged in sub-array 4.
!  A total of 32 telescope corrections were flagged in sub-array 5.
!  A total of 90 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 90 telescope corrections were flagged in sub-array 2.
!  A total of 210 telescope corrections were flagged in sub-array 3.
!  A total of 88 telescope corrections were flagged in sub-array 4.
!  A total of 32 telescope corrections were flagged in sub-array 5.
!  A total of 90 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 90 telescope corrections were flagged in sub-array 2.
!  A total of 210 telescope corrections were flagged in sub-array 3.
!  A total of 88 telescope corrections were flagged in sub-array 4.
!  A total of 32 telescope corrections were flagged in sub-array 5.
!  A total of 90 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=1.125127Jy  sigma=6.357559
! Fit after  self-cal, rms=0.755349Jy  sigma=5.112082
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.393 mas, bmaj=7.281 mas, bpa=-14.82 degrees
! Estimated noise=3.77819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148778 Jy
! Component: 100  -  total flux cleaned = 0.193561 Jy
! Total flux subtracted in 100 components = 0.193561 Jy
! Clean residual min=-0.030390 max=0.035342 Jy/beam
! Clean residual mean=-0.000039 rms=0.007273 Jy/beam
! Combined flux in latest and established models = 0.193561 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.193561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.346876Jy  sigma=1.054298
! Fit after  self-cal, rms=0.346480Jy  sigma=1.053252
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.611 mas, bmaj=8.473 mas, bpa=-15.03 degrees
! Estimated noise=2.7373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0691881 Jy
! Component: 100  -  total flux cleaned = 0.103136 Jy
! Component: 150  -  total flux cleaned = 0.120426 Jy
! Component: 200  -  total flux cleaned = 0.12999 Jy
! Total flux subtracted in 200 components = 0.12999 Jy
! Clean residual min=-0.043755 max=0.031973 Jy/beam
! Clean residual mean=-0.002568 rms=0.008482 Jy/beam
! Combined flux in latest and established models = 0.323551 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.323551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309880Jy  sigma=1.065939
! Fit after  self-cal, rms=0.308897Jy  sigma=1.064341
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.611 x 8.473 at -15.03 degrees (North through East)
! Clean map  min=-0.042954  max=0.23557 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 126 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 126 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 126 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MA        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 126 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   MA        0.00*    NY        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   HN        1.00*    MA        1.00*    NY        1.00*    ON        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MA        1.00*    NY        1.00*    ON        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
! 
! Fit before self-cal, rms=0.308897Jy  sigma=1.064341
! Fit after  self-cal, rms=0.251399Jy  sigma=1.038889
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0275744 Jy
! Component: 100  -  total flux cleaned = -0.0437371 Jy
! Component: 150  -  total flux cleaned = -0.0537101 Jy
! Component: 200  -  total flux cleaned = -0.0600946 Jy
! Total flux subtracted in 200 components = -0.0600946 Jy
! Clean residual min=-0.031427 max=0.028282 Jy/beam
! Clean residual mean=-0.002028 rms=0.007116 Jy/beam
! Combined flux in latest and established models = 0.263456 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.263456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253785Jy  sigma=0.965318
! Fit after  self-cal, rms=0.254046Jy  sigma=0.964894
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254046Jy  sigma=0.964894
! Fit after  self-cal, rms=0.254046Jy  sigma=0.964894
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00419372 Jy
! Component: 100  -  total flux cleaned = -0.0054102 Jy
! Component: 150  -  total flux cleaned = -0.00620013 Jy
! Component: 200  -  total flux cleaned = -0.00640438 Jy
! Total flux subtracted in 200 components = -0.00640438 Jy
! Clean residual min=-0.030482 max=0.028147 Jy/beam
! Clean residual mean=-0.001933 rms=0.007103 Jy/beam
! Combined flux in latest and established models = 0.257052 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.257052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254320Jy  sigma=0.960257
! Fit after  self-cal, rms=0.254360Jy  sigma=0.960227
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000653742 Jy
! Component: 100  -  total flux cleaned = -0.000752962 Jy
! Component: 150  -  total flux cleaned = -0.000849106 Jy
! Component: 200  -  total flux cleaned = -0.00102948 Jy
! Total flux subtracted in 200 components = -0.00102948 Jy
! Clean residual min=-0.030622 max=0.028148 Jy/beam
! Clean residual mean=-0.001918 rms=0.007100 Jy/beam
! Combined flux in latest and established models = 0.256022 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.256022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254290Jy  sigma=0.959546
! Fit after  self-cal, rms=0.254298Jy  sigma=0.959525
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254298Jy  sigma=0.959525
! Fit after  self-cal, rms=0.254298Jy  sigma=0.959525
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000199332 Jy
! Component: 100  -  total flux cleaned = -0.000289135 Jy
! Component: 150  -  total flux cleaned = -0.000378122 Jy
! Component: 200  -  total flux cleaned = -0.000465545 Jy
! Total flux subtracted in 200 components = -0.000465545 Jy
! Clean residual min=-0.030735 max=0.028156 Jy/beam
! Clean residual mean=-0.001910 rms=0.007099 Jy/beam
! Combined flux in latest and established models = 0.255557 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.255557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254195Jy  sigma=0.959278
! Fit after  self-cal, rms=0.254199Jy  sigma=0.959260
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.98872e-05 Jy
! Component: 100  -  total flux cleaned = -0.000181116 Jy
! Component: 150  -  total flux cleaned = -0.000261714 Jy
! Component: 200  -  total flux cleaned = -0.000420365 Jy
! Total flux subtracted in 200 components = -0.000420365 Jy
! Clean residual min=-0.030843 max=0.028162 Jy/beam
! Clean residual mean=-0.001902 rms=0.007098 Jy/beam
! Combined flux in latest and established models = 0.255136 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.255136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254102Jy  sigma=0.959061
! Fit after  self-cal, rms=0.254105Jy  sigma=0.959045
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254105Jy  sigma=0.959045
! Fit after  self-cal, rms=0.254105Jy  sigma=0.959045
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.174 mas, bmaj=10.91 mas, bpa=10.02 degrees
! Estimated noise=4.24885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444125 Jy
! Component: 100  -  total flux cleaned = 0.00443202 Jy
! Component: 150  -  total flux cleaned = 0.00420605 Jy
! Component: 200  -  total flux cleaned = 0.00420438 Jy
! Total flux subtracted in 200 components = 0.00420438 Jy
! Clean residual min=-0.057403 max=0.044033 Jy/beam
! Clean residual mean=-0.005367 rms=0.014792 Jy/beam
! Combined flux in latest and established models = 0.259341 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 74 components and 0.259341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253675Jy  sigma=0.967785
! Fit after  self-cal, rms=0.253580Jy  sigma=0.967557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233804 Jy
! Component: 100  -  total flux cleaned = 0.000244584 Jy
! Component: 150  -  total flux cleaned = 0.000238836 Jy
! Component: 200  -  total flux cleaned = 0.000248413 Jy
! Total flux subtracted in 200 components = 0.000248413 Jy
! Clean residual min=-0.057840 max=0.044084 Jy/beam
! Clean residual mean=-0.005347 rms=0.014804 Jy/beam
! Combined flux in latest and established models = 0.259589 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.259589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254034Jy  sigma=0.972249
! Fit after  self-cal, rms=0.253974Jy  sigma=0.972080
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.409 x 8.238 at -13.93 degrees (North through East)
! Clean map  min=-0.030967  max=0.20652 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=7.141 mas, bpa=-14.33 degrees
! Estimated noise=4.04761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135242 Jy
! Component: 100  -  total flux cleaned = 0.175332 Jy
! Component: 150  -  total flux cleaned = 0.179331 Jy
! Component: 200  -  total flux cleaned = 0.18164 Jy
! Total flux subtracted in 200 components = 0.18164 Jy
! Clean residual min=-0.024887 max=0.030969 Jy/beam
! Clean residual mean=-0.000049 rms=0.006879 Jy/beam
! Combined flux in latest and established models = 0.18164 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.18164 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404662 Jy
! Component: 100  -  total flux cleaned = 0.0609858 Jy
! Component: 150  -  total flux cleaned = 0.0663854 Jy
! Component: 200  -  total flux cleaned = 0.0684026 Jy
! Total flux subtracted in 200 components = 0.0684026 Jy
! Clean residual min=-0.028567 max=0.027553 Jy/beam
! Clean residual mean=-0.001795 rms=0.007159 Jy/beam
! Combined flux in latest and established models = 0.250043 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.250043 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.174 mas, bmaj=10.91 mas, bpa=10.02 degrees
! Estimated noise=4.24885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115883 Jy
! Component: 100  -  total flux cleaned = 0.0120431 Jy
! Component: 150  -  total flux cleaned = 0.0120264 Jy
! Component: 200  -  total flux cleaned = 0.0117535 Jy
! Total flux subtracted in 200 components = 0.0117535 Jy
! Clean residual min=-0.057147 max=0.043625 Jy/beam
! Clean residual mean=-0.005465 rms=0.014846 Jy/beam
! Combined flux in latest and established models = 0.261796 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.74195e-05 Jy
! Component: 100  -  total flux cleaned = -5.4608e-05 Jy
! Component: 150  -  total flux cleaned = -6.38189e-05 Jy
! Component: 200  -  total flux cleaned = -6.00973e-05 Jy
! Total flux subtracted in 200 components = -6.00973e-05 Jy
! Clean residual min=-0.057836 max=0.043933 Jy/beam
! Clean residual mean=-0.005462 rms=0.014829 Jy/beam
! Combined flux in latest and established models = 0.261736 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 42 components and 0.261736 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=8.238 mas, bpa=-13.93 degrees
! Estimated noise=2.97435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00419628 Jy
! Component: 100  -  total flux cleaned = -0.00461111 Jy
! Component: 150  -  total flux cleaned = -0.00606744 Jy
! Component: 200  -  total flux cleaned = -0.00689932 Jy
! Total flux subtracted in 200 components = -0.00689932 Jy
! Clean residual min=-0.029940 max=0.028041 Jy/beam
! Clean residual mean=-0.001887 rms=0.007213 Jy/beam
! Combined flux in latest and established models = 0.254837 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.254837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254507Jy  sigma=0.959279
! Fit after  self-cal, rms=0.254543Jy  sigma=0.958983
wmodel /scr/pima/rv102_uvs/J1332+0200_S_map.mod
! Writing 55 model components to file: /scr/pima/rv102_uvs/J1332+0200_S_map.mod
wobs /scr/pima/rv102_uvs/J1332+0200_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J1332+0200_S_uvs.fits
wwins /scr/pima/rv102_uvs/J1332+0200_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rv102_uvs/J1332+0200_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00396202 Jy
! Component: 100  -  total flux cleaned = -0.00788142 Jy
! Component: 150  -  total flux cleaned = -0.0120441 Jy
! Component: 200  -  total flux cleaned = -0.0160021 Jy
! Component: 250  -  total flux cleaned = -0.0193712 Jy
! Component: 300  -  total flux cleaned = -0.0218067 Jy
! Component: 350  -  total flux cleaned = -0.0257113 Jy
! Component: 400  -  total flux cleaned = -0.0283477 Jy
! Component: 450  -  total flux cleaned = -0.0312755 Jy
! Component: 500  -  total flux cleaned = -0.0341097 Jy
! Component: 550  -  total flux cleaned = -0.035828 Jy
! Component: 600  -  total flux cleaned = -0.0381771 Jy
! Component: 650  -  total flux cleaned = -0.0401378 Jy
! Component: 700  -  total flux cleaned = -0.0420501 Jy
! Component: 750  -  total flux cleaned = -0.0442226 Jy
! Component: 800  -  total flux cleaned = -0.0460372 Jy
! Component: 850  -  total flux cleaned = -0.0475188 Jy
! Component: 900  -  total flux cleaned = -0.0495516 Jy
! Component: 950  -  total flux cleaned = -0.0515341 Jy
! Component: 1000  -  total flux cleaned = -0.0532 Jy
! Component: 1050  -  total flux cleaned = -0.0551045 Jy
! Component: 1100  -  total flux cleaned = -0.0567007 Jy
! Component: 1150  -  total flux cleaned = -0.0580063 Jy
! Component: 1200  -  total flux cleaned = -0.0585223 Jy
! Component: 1250  -  total flux cleaned = -0.0602937 Jy
! Component: 1300  -  total flux cleaned = -0.0610405 Jy
! Component: 1350  -  total flux cleaned = -0.0625072 Jy
! Component: 1400  -  total flux cleaned = -0.0634686 Jy
! Component: 1450  -  total flux cleaned = -0.0641782 Jy
! Component: 1500  -  total flux cleaned = -0.0653442 Jy
! Component: 1550  -  total flux cleaned = -0.0669453 Jy
! Component: 1600  -  total flux cleaned = -0.0678437 Jy
! Component: 1650  -  total flux cleaned = -0.0687309 Jy
! Component: 1700  -  total flux cleaned = -0.0693883 Jy
! Component: 1750  -  total flux cleaned = -0.0706806 Jy
! Component: 1800  -  total flux cleaned = -0.0717402 Jy
! Component: 1850  -  total flux cleaned = -0.0727811 Jy
! Component: 1900  -  total flux cleaned = -0.0740133 Jy
! Component: 1950  -  total flux cleaned = -0.0746163 Jy
! Component: 2000  -  total flux cleaned = -0.075214 Jy
! Component: 2050  -  total flux cleaned = -0.0760018 Jy
! Component: 2100  -  total flux cleaned = -0.0765855 Jy
! Component: 2150  -  total flux cleaned = -0.0773519 Jy
! Component: 2200  -  total flux cleaned = -0.0784843 Jy
! Component: 2250  -  total flux cleaned = -0.078856 Jy
! Component: 2300  -  total flux cleaned = -0.0797738 Jy
! Component: 2350  -  total flux cleaned = -0.0799537 Jy
! Component: 2400  -  total flux cleaned = -0.0806704 Jy
! Component: 2450  -  total flux cleaned = -0.0810245 Jy
! Component: 2500  -  total flux cleaned = -0.0818981 Jy
! Component: 2550  -  total flux cleaned = -0.0822421 Jy
! Component: 2600  -  total flux cleaned = -0.0827535 Jy
! Component: 2650  -  total flux cleaned = -0.0830903 Jy
! Component: 2700  -  total flux cleaned = -0.0837564 Jy
! Component: 2750  -  total flux cleaned = -0.0840853 Jy
! Component: 2800  -  total flux cleaned = -0.0844107 Jy
! Component: 2850  -  total flux cleaned = -0.0847322 Jy
! Component: 2900  -  total flux cleaned = -0.0852078 Jy
! Component: 2950  -  total flux cleaned = -0.0852068 Jy
! Component: 3000  -  total flux cleaned = -0.0855199 Jy
! Component: 3050  -  total flux cleaned = -0.0858302 Jy
! Component: 3100  -  total flux cleaned = -0.0864406 Jy
! Component: 3150  -  total flux cleaned = -0.0867418 Jy
! Component: 3200  -  total flux cleaned = -0.0868905 Jy
! Component: 3250  -  total flux cleaned = -0.0873347 Jy
! Component: 3300  -  total flux cleaned = -0.0876277 Jy
! Component: 3350  -  total flux cleaned = -0.0879168 Jy
! Component: 3400  -  total flux cleaned = -0.0879174 Jy
! Component: 3450  -  total flux cleaned = -0.0884864 Jy
! Component: 3500  -  total flux cleaned = -0.0889068 Jy
! Component: 3550  -  total flux cleaned = -0.0891839 Jy
! Component: 3600  -  total flux cleaned = -0.0893221 Jy
! Component: 3650  -  total flux cleaned = -0.0895953 Jy
! Component: 3700  -  total flux cleaned = -0.0900004 Jy
! Component: 3750  -  total flux cleaned = -0.090267 Jy
! Component: 3800  -  total flux cleaned = -0.0906643 Jy
! Component: 3850  -  total flux cleaned = -0.0907953 Jy
! Component: 3900  -  total flux cleaned = -0.0910554 Jy
! Component: 3950  -  total flux cleaned = -0.0915693 Jy
! Component: 4000  -  total flux cleaned = -0.0913134 Jy
! Component: 4050  -  total flux cleaned = -0.0918207 Jy
! Total flux subtracted in 4096 components = -0.0920716 Jy
! Clean residual min=-0.007031 max=0.006329 Jy/beam
! Clean residual mean=-0.000277 rms=0.002651 Jy/beam
! Combined flux in latest and established models = 0.162765 Jy
keep
! Adding 412 model components to the UV plane model.
! The established model now contains 467 components and 0.162765 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J1332+0200_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.409 x 8.238 at -13.93 degrees (North through East)
! Clean map  min=-0.021802  max=0.20488 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1332+0200_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.204884 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00266189 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.89764 3.89764 7.79529 15.5906 31.1812 62.3623
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0079 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.204 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  76.969 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J1332+0200_S_uvs.log closed on Sat Feb 27 22:25:45 2016