! Started logfile: /scr/pima/rv102_uvs/J1147-0724_X_dfm.log on Sat Nov 9 10:19:12 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J1147-0724_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J1147-0724_X_uva.fits ! AN table 1: 71 integrations on 1 of 1 possible baselines. ! AN table 2: 119 integrations on 36 of 36 possible baselines. ! AN table 3: 42 integrations on 21 of 21 possible baselines. ! AN table 4: 106 integrations on 36 of 36 possible baselines. ! AN table 5: 41 integrations on 3 of 3 possible baselines. ! AN table 6: 18 integrations on 6 of 6 possible baselines. ! AN table 7: 20 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.735238 visibilities/baseline/integration-bin. ! Found source: J1147-0724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 27892 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1147-0724_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 232 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 278 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 232 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 278 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 232 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 278 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 232 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 278 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.138397Jy sigma=16.694302 ! Fit after self-cal, rms=0.591977Jy sigma=8.437111 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.5448 mas, bmaj=2.076 mas, bpa=-7.557 degrees ! Estimated noise=0.545188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333049 Jy ! Component: 100 - total flux cleaned = 0.434766 Jy ! Total flux subtracted in 100 components = 0.434766 Jy ! Clean residual min=-0.029715 max=0.123028 Jy/beam ! Clean residual mean=0.000413 rms=0.008356 Jy/beam ! Combined flux in latest and established models = 0.434766 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.434766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270433Jy sigma=3.657858 ! Fit after self-cal, rms=0.269749Jy sigma=3.653032 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105026 Jy ! Component: 100 - total flux cleaned = 0.162531 Jy ! Total flux subtracted in 100 components = 0.162531 Jy ! Clean residual min=-0.019530 max=0.041832 Jy/beam ! Clean residual mean=0.000300 rms=0.004703 Jy/beam ! Combined flux in latest and established models = 0.597296 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.597296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198650Jy sigma=2.522203 ! Fit after self-cal, rms=0.192164Jy sigma=2.429384 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490536 Jy ! Component: 100 - total flux cleaned = 0.0805504 Jy ! Total flux subtracted in 100 components = 0.0805504 Jy ! Clean residual min=-0.010063 max=0.020926 Jy/beam ! Clean residual mean=0.000247 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 0.677847 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.677847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168614Jy sigma=2.035478 ! Fit after self-cal, rms=0.167273Jy sigma=2.018568 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259488 Jy ! Component: 100 - total flux cleaned = 0.0439952 Jy ! Total flux subtracted in 100 components = 0.0439952 Jy ! Clean residual min=-0.008321 max=0.012481 Jy/beam ! Clean residual mean=0.000217 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.721842 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.721842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159014Jy sigma=1.884440 ! Fit after self-cal, rms=0.158689Jy sigma=1.880632 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148111 Jy ! Component: 100 - total flux cleaned = 0.025399 Jy ! Total flux subtracted in 100 components = 0.025399 Jy ! Clean residual min=-0.007821 max=0.009453 Jy/beam ! Clean residual mean=0.000199 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.747241 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.747241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155545Jy sigma=1.834515 ! Fit after self-cal, rms=0.155447Jy sigma=1.833381 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.626 mas, bmaj=2.39 mas, bpa=-7.353 degrees ! Estimated noise=0.315392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158533 Jy ! Component: 100 - total flux cleaned = 0.0250665 Jy ! Component: 150 - total flux cleaned = 0.0302911 Jy ! Component: 200 - total flux cleaned = 0.0317 Jy ! Total flux subtracted in 200 components = 0.0317 Jy ! Clean residual min=-0.006168 max=0.008948 Jy/beam ! Clean residual mean=0.000947 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.778941 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.778941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153241Jy sigma=1.809685 ! Fit after self-cal, rms=0.153153Jy sigma=1.808655 ! Inverting map ! Your choice of large map pixels excluded 4.35% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.626 x 2.39 at -7.353 degrees (North through East) ! Clean map min=-0.0057787 max=0.45292 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.98 KP 1.02 LA 1.02 ! MA 1.03 PT 1.02 SC 0.99 WF 0.93 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.99 KP 0.99 LA 1.00 ! PT 1.01 SC 1.05 WF 0.88 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 0.98 KP 0.99 LA 1.00 ! MK 1.04 NL 1.06 PT 1.01 SC 1.01 ! WF 0.92 ! ! A total of 117 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.95 LA 1.03 NL 0.98 PT 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.99 LA 0.99 MK 1.09 NL 1.02 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.93 KP 1.01 LA 1.00 ! MA 0.99 PT 1.04 SC 1.00 WF 0.92 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 0.98 KP 0.98 LA 0.99 ! PT 1.02 SC 1.00 WF 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 0.98 KP 0.98 LA 1.00 ! MK 1.00 NL 1.03 PT 1.01 SC 1.01 ! WF 0.93 ! ! A total of 117 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.99 LA 0.99 NL 0.97 PT 1.03 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.02 LA 1.01 MK 0.99 NL 1.01 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.97 KP 1.03 LA 1.01 ! MA 1.11 PT 1.01 SC 1.00 WF 0.91 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.00 KP 1.00 LA 0.99 ! PT 1.03 SC 0.99 WF 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 0.97 KP 1.00 LA 1.01 ! MK 0.99 NL 1.03 PT 1.01 SC 0.99 ! WF 0.90 ! ! A total of 117 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.99 LA 0.98 NL 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 LA 1.01 MK 1.02 NL 0.99 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.96 KP 1.01 LA 1.00 ! MA 1.17 PT 1.00 SC 0.99 WF 0.87 ! WZ 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 0.96 KP 1.00 LA 0.99 ! PT 1.01 SC 0.99 WF 0.89 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 0.95 KP 0.99 LA 1.00 ! MK 1.00 NL 1.05 PT 1.01 SC 0.99 ! WF 0.86 ! ! A total of 117 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.97 LA 0.98 NL 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 LA 1.01 MK 1.01 NL 1.01 ! PT 0.99 ! ! ! Fit before self-cal, rms=0.153153Jy sigma=1.808655 ! Fit after self-cal, rms=0.142874Jy sigma=1.772651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6226 mas, bmaj=2.443 mas, bpa=-7.525 degrees ! Estimated noise=0.312772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457704 Jy ! Component: 100 - total flux cleaned = 0.00501511 Jy ! Component: 150 - total flux cleaned = 0.00501474 Jy ! Component: 200 - total flux cleaned = 0.00491193 Jy ! Total flux subtracted in 200 components = 0.00491193 Jy ! Clean residual min=-0.003374 max=0.005102 Jy/beam ! Clean residual mean=0.000253 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.783853 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.783853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142520Jy sigma=1.767094 ! Fit after self-cal, rms=0.142426Jy sigma=1.766266 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (0, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246511 Jy ! Component: 100 - total flux cleaned = 0.00367843 Jy ! Component: 150 - total flux cleaned = 0.00433129 Jy ! Component: 200 - total flux cleaned = 0.00488492 Jy ! Total flux subtracted in 200 components = 0.00488492 Jy ! Clean residual min=-0.002652 max=0.004012 Jy/beam ! Clean residual mean=0.000231 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.788738 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.788738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142219Jy sigma=1.762625 ! Fit after self-cal, rms=0.142198Jy sigma=1.762460 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-1, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262726 Jy ! Component: 100 - total flux cleaned = 0.00412381 Jy ! Component: 150 - total flux cleaned = 0.00454689 Jy ! Component: 200 - total flux cleaned = 0.00484858 Jy ! Total flux subtracted in 200 components = 0.00484858 Jy ! Clean residual min=-0.002649 max=0.003275 Jy/beam ! Clean residual mean=0.000206 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.793586 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.793586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142060Jy sigma=1.760300 ! Fit after self-cal, rms=0.142054Jy sigma=1.760224 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142054Jy sigma=1.760224 ! Fit after self-cal, rms=0.141938Jy sigma=1.759518 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6222 mas, bmaj=2.445 mas, bpa=-7.566 degrees ! Estimated noise=0.312519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158211 Jy ! Component: 100 - total flux cleaned = 0.00150272 Jy ! Component: 150 - total flux cleaned = 0.00143962 Jy ! Component: 200 - total flux cleaned = 0.00150063 Jy ! Total flux subtracted in 200 components = 0.00150063 Jy ! Clean residual min=-0.002462 max=0.002851 Jy/beam ! Clean residual mean=0.000142 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.795087 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 0.795087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141876Jy sigma=1.758419 ! Fit after self-cal, rms=0.141873Jy sigma=1.758386 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.8, -43.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002587 Jy ! Component: 100 - total flux cleaned = 0.00398077 Jy ! Component: 150 - total flux cleaned = 0.00475646 Jy ! Component: 200 - total flux cleaned = 0.00506606 Jy ! Total flux subtracted in 200 components = 0.00506606 Jy ! Clean residual min=-0.002373 max=0.002737 Jy/beam ! Clean residual mean=0.000125 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.800153 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 100 components and 0.800153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141809Jy sigma=1.757476 ! Fit after self-cal, rms=0.141805Jy sigma=1.757429 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-23.6, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244059 Jy ! Component: 100 - total flux cleaned = 0.00334279 Jy ! Component: 150 - total flux cleaned = 0.00397815 Jy ! Component: 200 - total flux cleaned = 0.00451714 Jy ! Total flux subtracted in 200 components = 0.00451714 Jy ! Clean residual min=-0.002259 max=0.002532 Jy/beam ! Clean residual mean=0.000108 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.80467 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 0.80467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141740Jy sigma=1.756600 ! Fit after self-cal, rms=0.141740Jy sigma=1.756547 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (8.2, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183264 Jy ! Component: 100 - total flux cleaned = 0.0024327 Jy ! Component: 150 - total flux cleaned = 0.00306833 Jy ! Component: 200 - total flux cleaned = 0.00352265 Jy ! Total flux subtracted in 200 components = 0.00352265 Jy ! Clean residual min=-0.002160 max=0.002299 Jy/beam ! Clean residual mean=0.000092 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.808193 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 0.808193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141688Jy sigma=1.755858 ! Fit after self-cal, rms=0.141684Jy sigma=1.755819 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141684Jy sigma=1.755819 ! Fit after self-cal, rms=0.141787Jy sigma=1.754785 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6222 mas, bmaj=2.447 mas, bpa=-7.584 degrees ! Estimated noise=0.312603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840425 Jy ! Component: 100 - total flux cleaned = 0.00115851 Jy ! Component: 150 - total flux cleaned = 0.00136893 Jy ! Component: 200 - total flux cleaned = 0.00160586 Jy ! Total flux subtracted in 200 components = 0.00160586 Jy ! Clean residual min=-0.001927 max=0.002264 Jy/beam ! Clean residual mean=0.000079 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.809799 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 144 components and 0.809799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141760Jy sigma=1.754413 ! Fit after self-cal, rms=0.141761Jy sigma=1.754395 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, 45.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193839 Jy ! Component: 100 - total flux cleaned = 0.00308608 Jy ! Component: 150 - total flux cleaned = 0.00368577 Jy ! Component: 200 - total flux cleaned = 0.00417794 Jy ! Total flux subtracted in 200 components = 0.00417794 Jy ! Clean residual min=-0.001974 max=0.002085 Jy/beam ! Clean residual mean=0.000070 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.813977 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 163 components and 0.813977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141727Jy sigma=1.753845 ! Fit after self-cal, rms=0.141725Jy sigma=1.753818 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141725Jy sigma=1.753818 ! Fit after self-cal, rms=0.141748Jy sigma=1.753791 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=2.141 mas, bmaj=4.128 mas, bpa=-8.531 degrees ! Estimated noise=0.442966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155676 Jy ! Component: 100 - total flux cleaned = 0.00251184 Jy ! Component: 150 - total flux cleaned = 0.00330852 Jy ! Component: 200 - total flux cleaned = 0.0040627 Jy ! Total flux subtracted in 200 components = 0.0040627 Jy ! Clean residual min=-0.001753 max=0.001803 Jy/beam ! Clean residual mean=0.000131 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.81804 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 179 components and 0.818039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141736Jy sigma=1.753674 ! Fit after self-cal, rms=0.141735Jy sigma=1.753653 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599903 Jy ! Component: 100 - total flux cleaned = 0.00117059 Jy ! Component: 150 - total flux cleaned = 0.00160049 Jy ! Component: 200 - total flux cleaned = 0.00197147 Jy ! Total flux subtracted in 200 components = 0.00197147 Jy ! Clean residual min=-0.001722 max=0.001655 Jy/beam ! Clean residual mean=0.000112 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.820011 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 188 components and 0.820011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141735Jy sigma=1.753657 ! Fit after self-cal, rms=0.141734Jy sigma=1.753650 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6223 mas, bmaj=2.448 mas, bpa=-7.589 degrees ! Estimated noise=0.312618 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6223 x 2.448 at -7.589 degrees (North through East) ! Clean map min=-0.0034779 max=0.44754 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.5439 mas, bmaj=2.111 mas, bpa=-7.739 degrees ! Estimated noise=0.541863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.33487 Jy ! Component: 100 - total flux cleaned = 0.473393 Jy ! Component: 150 - total flux cleaned = 0.558566 Jy ! Component: 200 - total flux cleaned = 0.617564 Jy ! Total flux subtracted in 200 components = 0.617564 Jy ! Clean residual min=-0.011900 max=0.035608 Jy/beam ! Clean residual mean=0.000196 rms=0.003627 Jy/beam ! Combined flux in latest and established models = 0.617564 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.617564 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6223 mas, bmaj=2.448 mas, bpa=-7.589 degrees ! Estimated noise=0.312618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680384 Jy ! Component: 100 - total flux cleaned = 0.105897 Jy ! Component: 150 - total flux cleaned = 0.128784 Jy ! Component: 200 - total flux cleaned = 0.142938 Jy ! Total flux subtracted in 200 components = 0.142938 Jy ! Clean residual min=-0.003927 max=0.008143 Jy/beam ! Clean residual mean=0.000314 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.760502 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 39 components and 0.760502 Jy ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (0.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927795 Jy ! Component: 100 - total flux cleaned = 0.015668 Jy ! Component: 150 - total flux cleaned = 0.0203485 Jy ! Component: 200 - total flux cleaned = 0.0241573 Jy ! Total flux subtracted in 200 components = 0.0241573 Jy ! Clean residual min=-0.002792 max=0.003501 Jy/beam ! Clean residual mean=0.000190 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.78466 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 63 components and 0.78466 Jy ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-2.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371879 Jy ! Component: 100 - total flux cleaned = 0.00669967 Jy ! Component: 150 - total flux cleaned = 0.00935407 Jy ! Component: 200 - total flux cleaned = 0.0117427 Jy ! Total flux subtracted in 200 components = 0.0117427 Jy ! Clean residual min=-0.002444 max=0.002528 Jy/beam ! Clean residual mean=0.000139 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.796402 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 91 components and 0.796402 Jy ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-20.8, -34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025917 Jy ! Component: 100 - total flux cleaned = 0.00460338 Jy ! Component: 150 - total flux cleaned = 0.00636939 Jy ! Component: 200 - total flux cleaned = 0.00780111 Jy ! Total flux subtracted in 200 components = 0.00780111 Jy ! Clean residual min=-0.002251 max=0.002149 Jy/beam ! Clean residual mean=0.000106 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.804204 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 118 components and 0.804204 Jy ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=2.141 mas, bmaj=4.128 mas, bpa=-8.531 degrees ! Estimated noise=0.442966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256655 Jy ! Component: 100 - total flux cleaned = 0.00450109 Jy ! Component: 150 - total flux cleaned = 0.00611552 Jy ! Component: 200 - total flux cleaned = 0.00751822 Jy ! Total flux subtracted in 200 components = 0.00751822 Jy ! Clean residual min=-0.001789 max=0.002099 Jy/beam ! Clean residual mean=0.000195 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.811722 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125343 Jy ! Component: 100 - total flux cleaned = 0.00239007 Jy ! Component: 150 - total flux cleaned = 0.00342573 Jy ! Component: 200 - total flux cleaned = 0.00437791 Jy ! Total flux subtracted in 200 components = 0.00437791 Jy ! Clean residual min=-0.001718 max=0.002030 Jy/beam ! Clean residual mean=0.000151 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.8161 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 167 components and 0.8161 Jy ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6223 mas, bmaj=2.448 mas, bpa=-7.589 degrees ! Estimated noise=0.312618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626113 Jy ! Component: 100 - total flux cleaned = 0.00122488 Jy ! Component: 150 - total flux cleaned = 0.00177241 Jy ! Component: 200 - total flux cleaned = 0.00215475 Jy ! Total flux subtracted in 200 components = 0.00215475 Jy ! Clean residual min=-0.002299 max=0.002016 Jy/beam ! Clean residual mean=0.000048 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.818255 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 188 components and 0.818254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141727Jy sigma=1.753185 ! Fit after self-cal, rms=0.141699Jy sigma=1.752907 wmodel J1147-0724_X_map.mod ! Writing 188 model components to file: J1147-0724_X_map.mod wobs J1147-0724_X_uvs.fits ! Writing UV FITS file: J1147-0724_X_uvs.fits wwins J1147-0724_X_map.win ! wwins: Wrote 12 windows to J1147-0724_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212215 Jy ! Component: 100 - total flux cleaned = 0.000707281 Jy ! Component: 150 - total flux cleaned = 0.000940234 Jy ! Component: 200 - total flux cleaned = 0.00116311 Jy ! Component: 250 - total flux cleaned = 0.00125577 Jy ! Component: 300 - total flux cleaned = 0.00134611 Jy ! Component: 350 - total flux cleaned = 0.00143444 Jy ! Component: 400 - total flux cleaned = 0.0014916 Jy ! Component: 450 - total flux cleaned = 0.00154839 Jy ! Component: 500 - total flux cleaned = 0.00168815 Jy ! Component: 550 - total flux cleaned = 0.00179765 Jy ! Component: 600 - total flux cleaned = 0.00190542 Jy ! Component: 650 - total flux cleaned = 0.00206519 Jy ! Component: 700 - total flux cleaned = 0.00222203 Jy ! Component: 750 - total flux cleaned = 0.00240259 Jy ! Component: 800 - total flux cleaned = 0.00242831 Jy ! Component: 850 - total flux cleaned = 0.00252952 Jy ! Component: 900 - total flux cleaned = 0.00257948 Jy ! Component: 950 - total flux cleaned = 0.00267812 Jy ! Component: 1000 - total flux cleaned = 0.00262939 Jy ! Component: 1050 - total flux cleaned = 0.00272583 Jy ! Component: 1100 - total flux cleaned = 0.002726 Jy ! Component: 1150 - total flux cleaned = 0.00286774 Jy ! Component: 1200 - total flux cleaned = 0.00279745 Jy ! Component: 1250 - total flux cleaned = 0.00293685 Jy ! Component: 1300 - total flux cleaned = 0.00300576 Jy ! Component: 1350 - total flux cleaned = 0.0031189 Jy ! Component: 1400 - total flux cleaned = 0.00311862 Jy ! Component: 1450 - total flux cleaned = 0.00318571 Jy ! Component: 1500 - total flux cleaned = 0.00322984 Jy ! Component: 1550 - total flux cleaned = 0.00320823 Jy ! Component: 1600 - total flux cleaned = 0.00325183 Jy ! Component: 1650 - total flux cleaned = 0.00338147 Jy ! Component: 1700 - total flux cleaned = 0.00346692 Jy ! Component: 1750 - total flux cleaned = 0.00348818 Jy ! Component: 1800 - total flux cleaned = 0.00353052 Jy ! Component: 1850 - total flux cleaned = 0.00363476 Jy ! Component: 1900 - total flux cleaned = 0.00369674 Jy ! Component: 1950 - total flux cleaned = 0.00359382 Jy ! Component: 2000 - total flux cleaned = 0.00377752 Jy ! Component: 2050 - total flux cleaned = 0.00363574 Jy ! Component: 2100 - total flux cleaned = 0.0036758 Jy ! Component: 2150 - total flux cleaned = 0.00361589 Jy ! Component: 2200 - total flux cleaned = 0.00361563 Jy ! Component: 2250 - total flux cleaned = 0.0035369 Jy ! Component: 2300 - total flux cleaned = 0.00355665 Jy ! Component: 2350 - total flux cleaned = 0.00357581 Jy ! Component: 2400 - total flux cleaned = 0.00353716 Jy ! Component: 2450 - total flux cleaned = 0.0035179 Jy ! Component: 2500 - total flux cleaned = 0.00346102 Jy ! Component: 2550 - total flux cleaned = 0.0034232 Jy ! Component: 2600 - total flux cleaned = 0.00340457 Jy ! Component: 2650 - total flux cleaned = 0.00336717 Jy ! Component: 2700 - total flux cleaned = 0.00336727 Jy ! Component: 2750 - total flux cleaned = 0.00336717 Jy ! Component: 2800 - total flux cleaned = 0.00331228 Jy ! Component: 2850 - total flux cleaned = 0.00329422 Jy ! Component: 2900 - total flux cleaned = 0.00325801 Jy ! Component: 2950 - total flux cleaned = 0.00324012 Jy ! Component: 3000 - total flux cleaned = 0.00315057 Jy ! Component: 3050 - total flux cleaned = 0.0031328 Jy ! Component: 3100 - total flux cleaned = 0.00311521 Jy ! Component: 3150 - total flux cleaned = 0.00304488 Jy ! Component: 3200 - total flux cleaned = 0.00302742 Jy ! Component: 3250 - total flux cleaned = 0.00295781 Jy ! Component: 3300 - total flux cleaned = 0.00287144 Jy ! Component: 3350 - total flux cleaned = 0.00288839 Jy ! Component: 3400 - total flux cleaned = 0.00276869 Jy ! Component: 3450 - total flux cleaned = 0.00275165 Jy ! Component: 3500 - total flux cleaned = 0.00271779 Jy ! Component: 3550 - total flux cleaned = 0.00260003 Jy ! Component: 3600 - total flux cleaned = 0.00251636 Jy ! Component: 3650 - total flux cleaned = 0.00249974 Jy ! Component: 3700 - total flux cleaned = 0.00248324 Jy ! Component: 3750 - total flux cleaned = 0.00240096 Jy ! Component: 3800 - total flux cleaned = 0.00241751 Jy ! Component: 3850 - total flux cleaned = 0.00235233 Jy ! Component: 3900 - total flux cleaned = 0.00233617 Jy ! Component: 3950 - total flux cleaned = 0.00232013 Jy ! Component: 4000 - total flux cleaned = 0.00227189 Jy ! Component: 4050 - total flux cleaned = 0.00223986 Jy ! Total flux subtracted in 4096 components = 0.00220803 Jy ! Clean residual min=-0.000899 max=0.001155 Jy/beam ! Clean residual mean=0.000022 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.820462 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 502 components and 0.820463 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J1147-0724_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6223 x 2.448 at -7.589 degrees (North through East) ! Clean map min=-0.0015793 max=0.44656 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1147-0724_X_map.fits wmodel /scr/pima/rv102_uvs/J1147-0724_X_map.mod ! Writing 502 model components to file: /scr/pima/rv102_uvs/J1147-0724_X_map.mod wobs /scr/pima/rv102_uvs/J1147-0724_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J1147-0724_X_uvs.fits wwins /scr/pima/rv102_uvs/J1147-0724_X_map.win ! wwins: Wrote 13 windows to /scr/pima/rv102_uvs/J1147-0724_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.446564 invert ! Inverting map ! Your choice of large map pixels excluded 4.43% of the data. ! The x-axis pixel size should ideally be below 0.1881 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1854 0.1854 0.3708 0.7416 1.4832 2.9664 5.9328 11.8656 23.7312 47.4624 94.9248 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.446 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1618.12 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J1147-0724_X_dfm.log closed on Sat Nov 9 10:19:18 2019