! Started logfile: /scr/pima/rv102_uvs/J1107-4449_S_uvs.log on Sat Feb 27 22:25:14 2016
obs /scr/pima/rv102_uvs/J1107-4449_S_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J1107-4449_S_uva.fits
! AN table 1: 2 integrations on 10 of 10 possible baselines.
! AN table 2: 4 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1107-4449
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 224 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J1107-4449_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.455544Jy  sigma=7.560504
! Fit after  self-cal, rms=0.760053Jy  sigma=4.747193
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.63 mas, bmaj=16.95 mas, bpa=-0.7459 degrees
! Estimated noise=9.7562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.390215 Jy
! Component: 100  -  total flux cleaned = 0.59881 Jy
! Total flux subtracted in 100 components = 0.59881 Jy
! Clean residual min=-0.111531 max=0.232819 Jy/beam
! Clean residual mean=-0.001338 rms=0.045439 Jy/beam
! Combined flux in latest and established models = 0.59881 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.59881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.690249Jy  sigma=3.370968
! Fit after  self-cal, rms=0.688972Jy  sigma=3.364077
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.099 mas, bmaj=19.98 mas, bpa=-1.243 degrees
! Estimated noise=8.32407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.291711 Jy
! Component: 100  -  total flux cleaned = 0.481049 Jy
! Component: 150  -  total flux cleaned = 0.606516 Jy
! Component: 200  -  total flux cleaned = 0.689681 Jy
! Total flux subtracted in 200 components = 0.689681 Jy
! Clean residual min=-0.156990 max=0.218471 Jy/beam
! Clean residual mean=-0.001188 rms=0.055109 Jy/beam
! Combined flux in latest and established models = 1.28849 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 1.28849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445759Jy  sigma=2.633302
! Fit after  self-cal, rms=0.443852Jy  sigma=2.616835
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.099 x 19.98 at -1.243 degrees (North through East)
! Clean map  min=-0.14918  max=0.44223 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.85     KP        0.86     LA        0.89     PT        0.91     
!   SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.443852Jy  sigma=2.616835
! Fit after  self-cal, rms=0.434149Jy  sigma=2.583933
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=19.91 mas, bpa=-1.049 degrees
! Estimated noise=8.15461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154978 Jy
! Component: 100  -  total flux cleaned = 0.022108 Jy
! Component: 150  -  total flux cleaned = 0.0298247 Jy
! Component: 200  -  total flux cleaned = 0.0369595 Jy
! Total flux subtracted in 200 components = 0.0369595 Jy
! Clean residual min=-0.158531 max=0.202414 Jy/beam
! Clean residual mean=-0.000910 rms=0.050645 Jy/beam
! Combined flux in latest and established models = 1.32545 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 1.32545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.421651Jy  sigma=2.529457
! Fit after  self-cal, rms=0.421604Jy  sigma=2.527250
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.421604Jy  sigma=2.527250
! Fit after  self-cal, rms=0.421585Jy  sigma=2.526252
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.107 mas, bmaj=19.97 mas, bpa=-1.128 degrees
! Estimated noise=8.193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011113 Jy
! Component: 100  -  total flux cleaned = 0.0192077 Jy
! Component: 150  -  total flux cleaned = 0.0240507 Jy
! Component: 200  -  total flux cleaned = 0.0295546 Jy
! Total flux subtracted in 200 components = 0.0295546 Jy
! Clean residual min=-0.163345 max=0.195391 Jy/beam
! Clean residual mean=-0.000823 rms=0.049910 Jy/beam
! Combined flux in latest and established models = 1.35501 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 1.35501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.412972Jy  sigma=2.493087
! Fit after  self-cal, rms=0.412801Jy  sigma=2.489407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499095 Jy
! Component: 100  -  total flux cleaned = 0.0114779 Jy
! Component: 150  -  total flux cleaned = 0.0153571 Jy
! Component: 200  -  total flux cleaned = 0.0180251 Jy
! Total flux subtracted in 200 components = 0.0180251 Jy
! Clean residual min=-0.165614 max=0.186567 Jy/beam
! Clean residual mean=-0.000757 rms=0.049151 Jy/beam
! Combined flux in latest and established models = 1.37303 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 1.37303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.407239Jy  sigma=2.465491
! Fit after  self-cal, rms=0.406993Jy  sigma=2.461791
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.406993Jy  sigma=2.461791
! Fit after  self-cal, rms=0.406838Jy  sigma=2.459546
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.112 mas, bmaj=20.07 mas, bpa=-1.24 degrees
! Estimated noise=8.24528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489303 Jy
! Component: 100  -  total flux cleaned = 0.00893058 Jy
! Component: 150  -  total flux cleaned = 0.0116807 Jy
! Component: 200  -  total flux cleaned = 0.0142001 Jy
! Total flux subtracted in 200 components = 0.0142001 Jy
! Clean residual min=-0.166593 max=0.179898 Jy/beam
! Clean residual mean=-0.000728 rms=0.048973 Jy/beam
! Combined flux in latest and established models = 1.38723 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 1.38723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.402268Jy  sigma=2.438173
! Fit after  self-cal, rms=0.401996Jy  sigma=2.435076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012528 Jy
! Component: 100  -  total flux cleaned = 0.00337693 Jy
! Component: 150  -  total flux cleaned = 0.00574552 Jy
! Component: 200  -  total flux cleaned = 0.00871694 Jy
! Total flux subtracted in 200 components = 0.00871694 Jy
! Clean residual min=-0.166899 max=0.172373 Jy/beam
! Clean residual mean=-0.000694 rms=0.048489 Jy/beam
! Combined flux in latest and established models = 1.39595 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 1.39595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.398818Jy  sigma=2.417354
! Fit after  self-cal, rms=0.398551Jy  sigma=2.415157
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.398551Jy  sigma=2.415157
! Fit after  self-cal, rms=0.398539Jy  sigma=2.414341
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.619 mas, bmaj=35.99 mas, bpa=6.984 degrees
! Estimated noise=11.3896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0942787 Jy
! Component: 100  -  total flux cleaned = 0.109289 Jy
! Component: 150  -  total flux cleaned = 0.112468 Jy
! Component: 200  -  total flux cleaned = 0.115233 Jy
! Total flux subtracted in 200 components = 0.115233 Jy
! Clean residual min=-0.235588 max=0.216757 Jy/beam
! Clean residual mean=-0.000495 rms=0.077654 Jy/beam
! Combined flux in latest and established models = 1.51118 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 83 components and 1.51118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.400652Jy  sigma=2.509473
! Fit after  self-cal, rms=0.401519Jy  sigma=2.506702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101596 Jy
! Component: 100  -  total flux cleaned = 0.00326169 Jy
! Component: 150  -  total flux cleaned = 0.00532056 Jy
! Component: 200  -  total flux cleaned = 0.00612636 Jy
! Total flux subtracted in 200 components = 0.00612636 Jy
! Clean residual min=-0.237277 max=0.210221 Jy/beam
! Clean residual mean=-0.000456 rms=0.076589 Jy/beam
! Combined flux in latest and established models = 1.51731 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 1.51731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.408606Jy  sigma=2.555663
! Fit after  self-cal, rms=0.408860Jy  sigma=2.552225
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=20.13 mas, bpa=-1.307 degrees
! Estimated noise=8.27421 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.116 x 20.13 at -1.307 degrees (North through East)
! Clean map  min=-0.19506  max=0.45761 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.638 mas, bmaj=17.04 mas, bpa=-0.8249 degrees
! Estimated noise=9.75806 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.397342 Jy
! Component: 100  -  total flux cleaned = 0.628465 Jy
! Component: 150  -  total flux cleaned = 0.797347 Jy
! Component: 200  -  total flux cleaned = 0.922241 Jy
! Total flux subtracted in 200 components = 0.922241 Jy
! Clean residual min=-0.106906 max=0.179683 Jy/beam
! Clean residual mean=-0.000894 rms=0.037346 Jy/beam
! Combined flux in latest and established models = 0.922241 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.922241 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=20.13 mas, bpa=-1.307 degrees
! Estimated noise=8.27421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.178313 Jy
! Component: 100  -  total flux cleaned = 0.291606 Jy
! Component: 150  -  total flux cleaned = 0.36605 Jy
! Component: 200  -  total flux cleaned = 0.406771 Jy
! Total flux subtracted in 200 components = 0.406771 Jy
! Clean residual min=-0.148013 max=0.200653 Jy/beam
! Clean residual mean=-0.000944 rms=0.051586 Jy/beam
! Combined flux in latest and established models = 1.32901 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 1.32901 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.619 mas, bmaj=35.99 mas, bpa=6.984 degrees
! Estimated noise=11.3896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135902 Jy
! Component: 100  -  total flux cleaned = 0.151524 Jy
! Component: 150  -  total flux cleaned = 0.16157 Jy
! Component: 200  -  total flux cleaned = 0.167764 Jy
! Total flux subtracted in 200 components = 0.167764 Jy
! Clean residual min=-0.235699 max=0.229021 Jy/beam
! Clean residual mean=-0.000590 rms=0.078707 Jy/beam
! Combined flux in latest and established models = 1.49678 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00518879 Jy
! Component: 100  -  total flux cleaned = 0.00954598 Jy
! Component: 150  -  total flux cleaned = 0.0120292 Jy
! Component: 200  -  total flux cleaned = 0.0142298 Jy
! Total flux subtracted in 200 components = 0.0142298 Jy
! Clean residual min=-0.237160 max=0.215643 Jy/beam
! Clean residual mean=-0.000493 rms=0.076781 Jy/beam
! Combined flux in latest and established models = 1.51101 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 68 components and 1.51101 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=20.13 mas, bpa=-1.307 degrees
! Estimated noise=8.27421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0672032 Jy
! Component: 100  -  total flux cleaned = -0.0835819 Jy
! Component: 150  -  total flux cleaned = -0.0836338 Jy
! Component: 200  -  total flux cleaned = -0.0803737 Jy
! Total flux subtracted in 200 components = -0.0803737 Jy
! Clean residual min=-0.168106 max=0.177360 Jy/beam
! Clean residual mean=-0.000602 rms=0.047912 Jy/beam
! Combined flux in latest and established models = 1.43063 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 80 components and 1.43063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.399953Jy  sigma=2.439732
! Fit after  self-cal, rms=0.393346Jy  sigma=2.400522
wmodel /scr/pima/rv102_uvs/J1107-4449_S_map.mod
! Writing 80 model components to file: /scr/pima/rv102_uvs/J1107-4449_S_map.mod
wobs /scr/pima/rv102_uvs/J1107-4449_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J1107-4449_S_uvs.fits
wwins /scr/pima/rv102_uvs/J1107-4449_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rv102_uvs/J1107-4449_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558099 Jy
! Component: 100  -  total flux cleaned = 0.0246407 Jy
! Component: 150  -  total flux cleaned = 0.0439431 Jy
! Component: 200  -  total flux cleaned = 0.0588562 Jy
! Component: 250  -  total flux cleaned = 0.0722719 Jy
! Component: 300  -  total flux cleaned = 0.0861442 Jy
! Component: 350  -  total flux cleaned = 0.0940615 Jy
! Component: 400  -  total flux cleaned = 0.101381 Jy
! Component: 450  -  total flux cleaned = 0.110687 Jy
! Component: 500  -  total flux cleaned = 0.115557 Jy
! Component: 550  -  total flux cleaned = 0.12008 Jy
! Component: 600  -  total flux cleaned = 0.122166 Jy
! Component: 650  -  total flux cleaned = 0.128068 Jy
! Component: 700  -  total flux cleaned = 0.129941 Jy
! Component: 750  -  total flux cleaned = 0.133445 Jy
! Component: 800  -  total flux cleaned = 0.135917 Jy
! Component: 850  -  total flux cleaned = 0.13904 Jy
! Component: 900  -  total flux cleaned = 0.141965 Jy
! Component: 950  -  total flux cleaned = 0.146142 Jy
! Component: 1000  -  total flux cleaned = 0.150825 Jy
! Component: 1050  -  total flux cleaned = 0.155287 Jy
! Component: 1100  -  total flux cleaned = 0.160751 Jy
! Component: 1150  -  total flux cleaned = 0.16597 Jy
! Component: 1200  -  total flux cleaned = 0.171497 Jy
! Component: 1250  -  total flux cleaned = 0.174694 Jy
! Component: 1300  -  total flux cleaned = 0.177736 Jy
! Component: 1350  -  total flux cleaned = 0.181631 Jy
! Component: 1400  -  total flux cleaned = 0.185844 Jy
! Component: 1450  -  total flux cleaned = 0.189449 Jy
! Component: 1500  -  total flux cleaned = 0.192475 Jy
! Component: 1550  -  total flux cleaned = 0.19625 Jy
! Component: 1600  -  total flux cleaned = 0.200657 Jy
! Component: 1650  -  total flux cleaned = 0.205272 Jy
! Component: 1700  -  total flux cleaned = 0.208958 Jy
! Component: 1750  -  total flux cleaned = 0.212901 Jy
! Component: 1800  -  total flux cleaned = 0.21705 Jy
! Component: 1850  -  total flux cleaned = 0.220073 Jy
! Component: 1900  -  total flux cleaned = 0.22334 Jy
! Component: 1950  -  total flux cleaned = 0.226506 Jy
! Component: 2000  -  total flux cleaned = 0.22958 Jy
! Component: 2050  -  total flux cleaned = 0.231969 Jy
! Component: 2100  -  total flux cleaned = 0.234312 Jy
! Component: 2150  -  total flux cleaned = 0.236881 Jy
! Component: 2200  -  total flux cleaned = 0.239111 Jy
! Component: 2250  -  total flux cleaned = 0.241295 Jy
! Component: 2300  -  total flux cleaned = 0.243171 Jy
! Component: 2350  -  total flux cleaned = 0.244483 Jy
! Component: 2400  -  total flux cleaned = 0.246541 Jy
! Component: 2450  -  total flux cleaned = 0.247551 Jy
! Component: 2500  -  total flux cleaned = 0.249787 Jy
! Component: 2550  -  total flux cleaned = 0.251988 Jy
! Component: 2600  -  total flux cleaned = 0.254394 Jy
! Component: 2650  -  total flux cleaned = 0.256294 Jy
! Component: 2700  -  total flux cleaned = 0.258405 Jy
! Component: 2750  -  total flux cleaned = 0.26072 Jy
! Component: 2800  -  total flux cleaned = 0.262549 Jy
! Component: 2850  -  total flux cleaned = 0.264807 Jy
! Component: 2900  -  total flux cleaned = 0.26659 Jy
! Component: 2950  -  total flux cleaned = 0.268795 Jy
! Component: 3000  -  total flux cleaned = 0.270971 Jy
! Component: 3050  -  total flux cleaned = 0.272478 Jy
! Component: 3100  -  total flux cleaned = 0.273968 Jy
! Component: 3150  -  total flux cleaned = 0.276073 Jy
! Component: 3200  -  total flux cleaned = 0.277736 Jy
! Component: 3250  -  total flux cleaned = 0.279382 Jy
! Component: 3300  -  total flux cleaned = 0.2804 Jy
! Component: 3350  -  total flux cleaned = 0.282015 Jy
! Component: 3400  -  total flux cleaned = 0.283415 Jy
! Component: 3450  -  total flux cleaned = 0.284407 Jy
! Component: 3500  -  total flux cleaned = 0.285978 Jy
! Component: 3550  -  total flux cleaned = 0.286756 Jy
! Component: 3600  -  total flux cleaned = 0.287722 Jy
! Component: 3650  -  total flux cleaned = 0.288872 Jy
! Component: 3700  -  total flux cleaned = 0.290202 Jy
! Component: 3750  -  total flux cleaned = 0.291333 Jy
! Component: 3800  -  total flux cleaned = 0.292643 Jy
! Component: 3850  -  total flux cleaned = 0.29413 Jy
! Component: 3900  -  total flux cleaned = 0.295422 Jy
! Component: 3950  -  total flux cleaned = 0.296521 Jy
! Component: 4000  -  total flux cleaned = 0.29834 Jy
! Component: 4050  -  total flux cleaned = 0.299424 Jy
! Total flux subtracted in 4096 components = 0.300683 Jy
! Clean residual min=-0.010100 max=0.011030 Jy/beam
! Clean residual mean=0.000164 rms=0.003652 Jy/beam
! Combined flux in latest and established models = 1.73131 Jy
keep
! Adding 688 model components to the UV plane model.
! The established model now contains 768 components and 1.73131 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J1107-4449_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.116 x 20.13 at -1.307 degrees (North through East)
! Clean map  min=-0.067664  max=0.47412 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1107-4449_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.474124 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00350138 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.21548 2.21548 4.43097 8.86194 17.7239 35.4477 70.8955
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0105 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.474 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  135.41 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J1107-4449_S_uvs.log closed on Sat Feb 27 22:25:17 2016