! Started logfile: /scr/pima/rv102_uvs/J1041+523A_X_dfm.log on Sat Nov  9 10:18:49 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rv102_uvs/J1041+523A_X_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J1041+523A_X_uva.fits
! AN table 1: 43 integrations on 15 of 15 possible baselines.
! AN table 2: 38 integrations on 21 of 21 possible baselines.
! AN table 3: 35 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.849085 visibilities/baseline/integration-bin.
! Found source: J1041+523A
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6684 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1041+523A_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
!  A total of 41 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
!  A total of 41 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
!  A total of 41 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
!  A total of 41 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.072180Jy  sigma=17.241998
! Fit after  self-cal, rms=0.651938Jy  sigma=10.597866
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7731 mas, bmaj=1.086 mas, bpa=-38.05 degrees
! Estimated noise=1.00355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.245285 Jy
! Component: 100  -  total flux cleaned = 0.356559 Jy
! Total flux subtracted in 100 components = 0.356559 Jy
! Clean residual min=-0.027034 max=0.056206 Jy/beam
! Clean residual mean=0.000040 rms=0.007103 Jy/beam
! Combined flux in latest and established models = 0.35656 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.35656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167088Jy  sigma=2.574965
! Fit after  self-cal, rms=0.165433Jy  sigma=2.550606
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0647942 Jy
! Component: 100  -  total flux cleaned = 0.100365 Jy
! Total flux subtracted in 100 components = 0.100365 Jy
! Clean residual min=-0.014807 max=0.020787 Jy/beam
! Clean residual mean=0.000014 rms=0.003521 Jy/beam
! Combined flux in latest and established models = 0.456925 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.456925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124057Jy  sigma=1.894216
! Fit after  self-cal, rms=0.123416Jy  sigma=1.884981
! Inverting map 
! Added new window around map position (-0.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230371 Jy
! Component: 100  -  total flux cleaned = 0.0357286 Jy
! Total flux subtracted in 100 components = 0.0357286 Jy
! Clean residual min=-0.011428 max=0.013295 Jy/beam
! Clean residual mean=0.000005 rms=0.002789 Jy/beam
! Combined flux in latest and established models = 0.492654 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.492654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117475Jy  sigma=1.797175
! Fit after  self-cal, rms=0.117242Jy  sigma=1.793377
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=1.464 mas, bpa=-64.46 degrees
! Estimated noise=0.577667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142391 Jy
! Component: 100  -  total flux cleaned = 0.0171298 Jy
! Component: 150  -  total flux cleaned = 0.018971 Jy
! Component: 200  -  total flux cleaned = 0.0193889 Jy
! Total flux subtracted in 200 components = 0.0193889 Jy
! Clean residual min=-0.006443 max=0.007304 Jy/beam
! Clean residual mean=-0.000005 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 0.512043 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.512043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114808Jy  sigma=1.755813
! Fit after  self-cal, rms=0.114632Jy  sigma=1.753165
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.115 x 1.464 at -64.46 degrees (North through East)
! Clean map  min=-0.010252  max=0.34931 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.00     LA        0.98     MK        1.08     
!   NL        0.97     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        0.99     KP        1.03     LA        0.99     
!   NL        1.05     PT        1.02     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     HN        1.05     LA        1.00     MK        1.02     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        0.99     LA        1.00     MK        1.02     
!   NL        0.99     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        0.97     KP        1.01     LA        0.98     
!   NL        1.04     PT        0.99     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     HN        0.94     LA        0.97     MK        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.01     LA        0.98     MK        0.91     
!   NL        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        0.99     KP        1.04     LA        0.97     
!   NL        1.04     PT        1.01     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     HN        0.99     LA        1.02     MK        1.00     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.02     LA        0.99     MK        1.13     
!   NL        0.96     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.12     HN        0.94     KP        1.05     LA        0.96     
!   NL        1.09     PT        1.01     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.96     HN        0.98     LA        0.99     MK        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.114632Jy  sigma=1.753165
! Fit after  self-cal, rms=0.113682Jy  sigma=1.727746
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.459 mas, bpa=-63.12 degrees
! Estimated noise=0.575941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112665 Jy
! Component: 100  -  total flux cleaned = 0.00136573 Jy
! Component: 150  -  total flux cleaned = 0.00128766 Jy
! Component: 200  -  total flux cleaned = 0.00120981 Jy
! Total flux subtracted in 200 components = 0.00120981 Jy
! Clean residual min=-0.004034 max=0.003534 Jy/beam
! Clean residual mean=-0.000000 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.513252 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.513252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113467Jy  sigma=1.724408
! Fit after  self-cal, rms=0.113450Jy  sigma=1.724159
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113450Jy  sigma=1.724159
! Fit after  self-cal, rms=0.113252Jy  sigma=1.723628
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=1.456 mas, bpa=-62.96 degrees
! Estimated noise=0.575416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140838 Jy
! Component: 100  -  total flux cleaned = 0.00148918 Jy
! Component: 150  -  total flux cleaned = 0.00148749 Jy
! Component: 200  -  total flux cleaned = 0.00148836 Jy
! Total flux subtracted in 200 components = 0.00148836 Jy
! Clean residual min=-0.003685 max=0.003357 Jy/beam
! Clean residual mean=-0.000001 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.514741 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.514741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113144Jy  sigma=1.722093
! Fit after  self-cal, rms=0.113137Jy  sigma=1.722040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271682 Jy
! Component: 100  -  total flux cleaned = -0.000271171 Jy
! Component: 150  -  total flux cleaned = -0.000268086 Jy
! Component: 200  -  total flux cleaned = -0.000221559 Jy
! Total flux subtracted in 200 components = -0.000221559 Jy
! Clean residual min=-0.003649 max=0.003405 Jy/beam
! Clean residual mean=-0.000000 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.514519 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 0.514519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113095Jy  sigma=1.721402
! Fit after  self-cal, rms=0.113096Jy  sigma=1.721383
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113096Jy  sigma=1.721383
! Fit after  self-cal, rms=0.112883Jy  sigma=1.720986
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.452 mas, bpa=-63.12 degrees
! Estimated noise=0.574687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142806 Jy
! Component: 100  -  total flux cleaned = 0.00158917 Jy
! Component: 150  -  total flux cleaned = 0.00163479 Jy
! Component: 200  -  total flux cleaned = 0.00163553 Jy
! Total flux subtracted in 200 components = 0.00163553 Jy
! Clean residual min=-0.003569 max=0.003479 Jy/beam
! Clean residual mean=-0.000001 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.516155 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.516155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112826Jy  sigma=1.720296
! Fit after  self-cal, rms=0.112824Jy  sigma=1.720266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.30024e-05 Jy
! Component: 100  -  total flux cleaned = -9.17518e-05 Jy
! Component: 150  -  total flux cleaned = -0.000125531 Jy
! Component: 200  -  total flux cleaned = -0.000124635 Jy
! Total flux subtracted in 200 components = -0.000124635 Jy
! Clean residual min=-0.003529 max=0.003518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.51603 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.51603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112802Jy  sigma=1.719946
! Fit after  self-cal, rms=0.112804Jy  sigma=1.719935
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112804Jy  sigma=1.719935
! Fit after  self-cal, rms=0.112696Jy  sigma=1.719709
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.597 mas, bmaj=3.64 mas, bpa=78.18 degrees
! Estimated noise=0.733723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138386 Jy
! Component: 100  -  total flux cleaned = 0.00150021 Jy
! Component: 150  -  total flux cleaned = 0.00161041 Jy
! Component: 200  -  total flux cleaned = 0.00167931 Jy
! Total flux subtracted in 200 components = 0.00167931 Jy
! Clean residual min=-0.003226 max=0.003211 Jy/beam
! Clean residual mean=-0.000002 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.517709 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 0.517709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112677Jy  sigma=1.719586
! Fit after  self-cal, rms=0.112673Jy  sigma=1.719558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.90839e-05 Jy
! Component: 100  -  total flux cleaned = 4.36022e-05 Jy
! Component: 150  -  total flux cleaned = 6.91484e-05 Jy
! Component: 200  -  total flux cleaned = 9.26632e-05 Jy
! Total flux subtracted in 200 components = 9.26632e-05 Jy
! Clean residual min=-0.003173 max=0.003233 Jy/beam
! Clean residual mean=-0.000003 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.517802 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 87 components and 0.517802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112669Jy  sigma=1.719569
! Fit after  self-cal, rms=0.112669Jy  sigma=1.719564
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=1.449 mas, bpa=-63.24 degrees
! Estimated noise=0.574321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.108 x 1.449 at -63.24 degrees (North through East)
! Clean map  min=-0.006533  max=0.34541 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7676 mas, bmaj=1.084 mas, bpa=-37.31 degrees
! Estimated noise=0.991952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244195 Jy
! Component: 100  -  total flux cleaned = 0.359461 Jy
! Component: 150  -  total flux cleaned = 0.422743 Jy
! Component: 200  -  total flux cleaned = 0.458009 Jy
! Total flux subtracted in 200 components = 0.458009 Jy
! Clean residual min=-0.013022 max=0.019323 Jy/beam
! Clean residual mean=0.000014 rms=0.003230 Jy/beam
! Combined flux in latest and established models = 0.458009 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.458009 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=1.449 mas, bpa=-63.24 degrees
! Estimated noise=0.574321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320218 Jy
! Component: 100  -  total flux cleaned = 0.0479817 Jy
! Component: 150  -  total flux cleaned = 0.0561853 Jy
! Component: 200  -  total flux cleaned = 0.0578872 Jy
! Total flux subtracted in 200 components = 0.0578872 Jy
! Clean residual min=-0.004291 max=0.003845 Jy/beam
! Clean residual mean=0.000004 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.515896 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 37 components and 0.515896 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.597 mas, bmaj=3.64 mas, bpa=78.18 degrees
! Estimated noise=0.733723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149051 Jy
! Component: 100  -  total flux cleaned = 0.00169485 Jy
! Component: 150  -  total flux cleaned = 0.00177604 Jy
! Component: 200  -  total flux cleaned = 0.00184053 Jy
! Total flux subtracted in 200 components = 0.00184053 Jy
! Clean residual min=-0.003270 max=0.003369 Jy/beam
! Clean residual mean=-0.000003 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.517736 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.87176e-05 Jy
! Component: 100  -  total flux cleaned = -0.000123291 Jy
! Component: 150  -  total flux cleaned = -0.000151652 Jy
! Component: 200  -  total flux cleaned = -0.000177171 Jy
! Total flux subtracted in 200 components = -0.000177171 Jy
! Clean residual min=-0.003217 max=0.003331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.517559 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 58 components and 0.517559 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=1.449 mas, bpa=-63.24 degrees
! Estimated noise=0.574321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000319975 Jy
! Component: 100  -  total flux cleaned = -0.000321301 Jy
! Component: 150  -  total flux cleaned = -0.000381302 Jy
! Component: 200  -  total flux cleaned = -0.000437837 Jy
! Total flux subtracted in 200 components = -0.000437837 Jy
! Clean residual min=-0.003695 max=0.003697 Jy/beam
! Clean residual mean=-0.000000 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.517122 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.517122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112736Jy  sigma=1.721028
! Fit after  self-cal, rms=0.112723Jy  sigma=1.720697
wmodel J1041+523A_X_map.mod
! Writing 73 model components to file: J1041+523A_X_map.mod
wobs   J1041+523A_X_uvs.fits
! Writing UV FITS file: J1041+523A_X_uvs.fits
wwins  J1041+523A_X_map.win
! wwins: Wrote 3 windows to J1041+523A_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000666082 Jy
! Component: 100  -  total flux cleaned = -0.000962365 Jy
! Component: 150  -  total flux cleaned = -0.00129957 Jy
! Component: 200  -  total flux cleaned = -0.00146044 Jy
! Component: 250  -  total flux cleaned = -0.00135729 Jy
! Component: 300  -  total flux cleaned = -0.0014066 Jy
! Component: 350  -  total flux cleaned = -0.00145369 Jy
! Component: 400  -  total flux cleaned = -0.00145332 Jy
! Component: 450  -  total flux cleaned = -0.00145293 Jy
! Component: 500  -  total flux cleaned = -0.00149659 Jy
! Component: 550  -  total flux cleaned = -0.00158105 Jy
! Component: 600  -  total flux cleaned = -0.00162169 Jy
! Component: 650  -  total flux cleaned = -0.00178425 Jy
! Component: 700  -  total flux cleaned = -0.00206159 Jy
! Component: 750  -  total flux cleaned = -0.0021775 Jy
! Component: 800  -  total flux cleaned = -0.00248217 Jy
! Component: 850  -  total flux cleaned = -0.00278009 Jy
! Component: 900  -  total flux cleaned = -0.00292648 Jy
! Component: 950  -  total flux cleaned = -0.00314205 Jy
! Component: 1000  -  total flux cleaned = -0.00342556 Jy
! Component: 1050  -  total flux cleaned = -0.00366915 Jy
! Component: 1100  -  total flux cleaned = -0.00387517 Jy
! Component: 1150  -  total flux cleaned = -0.00411201 Jy
! Component: 1200  -  total flux cleaned = -0.00434518 Jy
! Component: 1250  -  total flux cleaned = -0.00454259 Jy
! Component: 1300  -  total flux cleaned = -0.00463968 Jy
! Component: 1350  -  total flux cleaned = -0.0047682 Jy
! Component: 1400  -  total flux cleaned = -0.00498978 Jy
! Component: 1450  -  total flux cleaned = -0.0050207 Jy
! Component: 1500  -  total flux cleaned = -0.00514354 Jy
! Component: 1550  -  total flux cleaned = -0.00526528 Jy
! Component: 1600  -  total flux cleaned = -0.0053857 Jy
! Component: 1650  -  total flux cleaned = -0.00541516 Jy
! Component: 1700  -  total flux cleaned = -0.00541571 Jy
! Component: 1750  -  total flux cleaned = -0.00553169 Jy
! Component: 1800  -  total flux cleaned = -0.00561745 Jy
! Component: 1850  -  total flux cleaned = -0.00553211 Jy
! Component: 1900  -  total flux cleaned = -0.0055044 Jy
! Component: 1950  -  total flux cleaned = -0.00550501 Jy
! Component: 2000  -  total flux cleaned = -0.00561517 Jy
! Component: 2050  -  total flux cleaned = -0.00550595 Jy
! Component: 2100  -  total flux cleaned = -0.00556035 Jy
! Component: 2150  -  total flux cleaned = -0.00564056 Jy
! Component: 2200  -  total flux cleaned = -0.0057463 Jy
! Component: 2250  -  total flux cleaned = -0.00569351 Jy
! Component: 2300  -  total flux cleaned = -0.0057196 Jy
! Component: 2350  -  total flux cleaned = -0.00574512 Jy
! Component: 2400  -  total flux cleaned = -0.00577044 Jy
! Component: 2450  -  total flux cleaned = -0.00587126 Jy
! Component: 2500  -  total flux cleaned = -0.00587113 Jy
! Component: 2550  -  total flux cleaned = -0.00592093 Jy
! Component: 2600  -  total flux cleaned = -0.00594565 Jy
! Component: 2650  -  total flux cleaned = -0.00594553 Jy
! Component: 2700  -  total flux cleaned = -0.00609077 Jy
! Component: 2750  -  total flux cleaned = -0.0061146 Jy
! Component: 2800  -  total flux cleaned = -0.00599563 Jy
! Component: 2850  -  total flux cleaned = -0.00604305 Jy
! Component: 2900  -  total flux cleaned = -0.00604331 Jy
! Component: 2950  -  total flux cleaned = -0.00601991 Jy
! Component: 3000  -  total flux cleaned = -0.00601987 Jy
! Component: 3050  -  total flux cleaned = -0.00601992 Jy
! Component: 3100  -  total flux cleaned = -0.00604262 Jy
! Component: 3150  -  total flux cleaned = -0.00608791 Jy
! Component: 3200  -  total flux cleaned = -0.00611031 Jy
! Component: 3250  -  total flux cleaned = -0.00611045 Jy
! Component: 3300  -  total flux cleaned = -0.00622147 Jy
! Component: 3350  -  total flux cleaned = -0.00615522 Jy
! Component: 3400  -  total flux cleaned = -0.00622085 Jy
! Component: 3450  -  total flux cleaned = -0.00622072 Jy
! Component: 3500  -  total flux cleaned = -0.00613412 Jy
! Component: 3550  -  total flux cleaned = -0.00615568 Jy
! Component: 3600  -  total flux cleaned = -0.00624132 Jy
! Component: 3650  -  total flux cleaned = -0.00630507 Jy
! Component: 3700  -  total flux cleaned = -0.00626289 Jy
! Component: 3750  -  total flux cleaned = -0.00624179 Jy
! Component: 3800  -  total flux cleaned = -0.00624181 Jy
! Component: 3850  -  total flux cleaned = -0.00630418 Jy
! Component: 3900  -  total flux cleaned = -0.00622122 Jy
! Component: 3950  -  total flux cleaned = -0.00628316 Jy
! Component: 4000  -  total flux cleaned = -0.00626263 Jy
! Component: 4050  -  total flux cleaned = -0.00630339 Jy
! Total flux subtracted in 4096 components = -0.0062832 Jy
! Clean residual min=-0.001262 max=0.001193 Jy/beam
! Clean residual mean=0.000005 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.510838 Jy
keep
! Adding 239 model components to the UV plane model.
! The established model now contains 312 components and 0.510838 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv102_uvs/J1041+523A_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.108 x 1.449 at -63.24 degrees (North through East)
! Clean map  min=-0.0056316  max=0.34507 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J1041+523A_X_map.fits
wmodel /scr/pima/rv102_uvs/J1041+523A_X_map.mod
! Writing 312 model components to file: /scr/pima/rv102_uvs/J1041+523A_X_map.mod
wobs   /scr/pima/rv102_uvs/J1041+523A_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J1041+523A_X_uvs.fits
wwins  /scr/pima/rv102_uvs/J1041+523A_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J1041+523A_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.34507 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00033016 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.287038 0.287038 0.574076 1.14815 2.2963 4.5926 9.18521 18.3704 36.7408 73.4817
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.345 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1045.16 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J1041+523A_X_dfm.log closed on Sat Nov  9 10:18:53 2019