! Started logfile: /scr/pima/rv102_uvs/J0927-2034_S_dfm.log on Sat Nov 9 09:33:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J0927-2034_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0927-2034_S_uva.fits ! AN table 1: 73 integrations on 3 of 3 possible baselines. ! AN table 2: 8 integrations on 6 of 6 possible baselines. ! AN table 3: 3 integrations on 3 of 3 possible baselines. ! AN table 4: 5 integrations on 3 of 3 possible baselines. ! AN table 5: 2 integrations on 1 of 1 possible baselines. ! AN table 6: 2 integrations on 6 of 6 possible baselines. ! AN table 7: 6 integrations on 28 of 28 possible baselines. ! AN table 8: 2 integrations on 6 of 6 possible baselines. ! AN table 9: 2 integrations on 36 of 36 possible baselines. ! AN table 10: 2 integrations on 3 of 3 possible baselines. ! AN table 11: 2 integrations on 28 of 28 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! AN table 13: 2 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.950558 visibilities/baseline/integration-bin. ! Found source: J0927-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 2384 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0927-2034_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 219 telescope corrections were flagged in sub-array 1. ! A total of 23 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! A total of 23 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=1.412722Jy sigma=13.702040 ! Fit after self-cal, rms=0.370548Jy sigma=1.781578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.897 mas, bpa=-4.75 degrees ! Estimated noise=2.20551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.676262 Jy ! Component: 100 - total flux cleaned = 0.839013 Jy ! Total flux subtracted in 100 components = 0.839013 Jy ! Clean residual min=-0.020420 max=0.061216 Jy/beam ! Clean residual mean=0.000094 rms=0.005634 Jy/beam ! Combined flux in latest and established models = 0.839013 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.839013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377575Jy sigma=1.647835 ! Fit after self-cal, rms=0.377597Jy sigma=1.647767 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607973 Jy ! Component: 100 - total flux cleaned = 0.0879663 Jy ! Total flux subtracted in 100 components = 0.0879663 Jy ! Clean residual min=-0.016404 max=0.030187 Jy/beam ! Clean residual mean=0.000028 rms=0.004270 Jy/beam ! Combined flux in latest and established models = 0.92698 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.926979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355296Jy sigma=1.308475 ! Fit after self-cal, rms=0.355310Jy sigma=1.308244 ! Inverting map ! Added new window around map position (5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266719 Jy ! Component: 100 - total flux cleaned = 0.0374946 Jy ! Total flux subtracted in 100 components = 0.0374946 Jy ! Clean residual min=-0.015872 max=0.026466 Jy/beam ! Clean residual mean=-0.000001 rms=0.003974 Jy/beam ! Combined flux in latest and established models = 0.964474 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.964474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348463Jy sigma=1.243726 ! Fit after self-cal, rms=0.348446Jy sigma=1.240384 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=9.628 mas, bpa=-7.205 degrees ! Estimated noise=1.82313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242184 Jy ! Component: 100 - total flux cleaned = 0.0331544 Jy ! Component: 150 - total flux cleaned = 0.0380529 Jy ! Component: 200 - total flux cleaned = 0.0406048 Jy ! Total flux subtracted in 200 components = 0.0406048 Jy ! Clean residual min=-0.012221 max=0.010498 Jy/beam ! Clean residual mean=-0.000085 rms=0.002713 Jy/beam ! Combined flux in latest and established models = 1.00508 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 59 components and 1.00508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341522Jy sigma=1.198237 ! Fit after self-cal, rms=0.341450Jy sigma=1.197199 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 9.628 at -7.205 degrees (North through East) ! Clean map min=-0.014247 max=0.89186 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.25 ON 1.04 SC 1.48 WZ 0.89 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! SC 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.98 KP 1.03 LA 1.09 MA 2.73 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00 HN 1.00 KP 0.98 LA 1.01 ! NL 1.00 PT 1.01 SC 0.96 WF 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.96 NL 1.01 SC 1.03 WF 0.97 ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.98 HN 1.03 KP 0.94 LA 1.02 ! MK 1.04 NL 1.00 PT 1.02 SC 1.02 ! WF 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 0.99 HN 1.17 KP 0.97 LA 1.01 ! MK 1.08 PT 1.02 SC 0.94 WF 0.92 ! ! Telescope amplitude corrections in sub-array 12: ! LA 0.00* PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 0.00* MK 0.00* PT 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! SC 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 0.00* KP 0.00* LA 0.00* MA 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.02 KP 0.99 LA 0.99 ! NL 1.02 PT 1.02 SC 1.00 WF 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.05 NL 0.95 SC 0.99 WF 1.02 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00 HN 1.03 KP 0.93 LA 0.99 ! MK 0.98 NL 1.04 PT 1.02 SC 1.03 ! WF 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.01 HN 1.17 KP 0.93 LA 1.00 ! MK 1.00 PT 1.02 SC 1.01 WF 0.98 ! ! Telescope amplitude corrections in sub-array 12: ! LA 0.00* PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 0.00* MK 0.00* PT 0.00* ! ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.64 ON 1.12 SC 1.32 WZ 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! SC 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00 KP 0.98 LA 1.04 MA 3.20 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.01 KP 1.02 LA 1.00 ! NL 0.99 PT 1.02 SC 1.01 WF 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.96 NL 0.96 SC 0.97 WF 0.92 ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.98 HN 1.01 KP 1.00 LA 1.00 ! MK 0.98 NL 0.98 PT 1.04 SC 1.01 ! WF 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.01 HN 1.15 KP 1.00 LA 0.98 ! MK 0.93 PT 1.07 SC 0.96 WF 0.94 ! ! Telescope amplitude corrections in sub-array 12: ! LA 0.00* PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 0.00* MK 0.00* PT 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! SC 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 0.00* KP 0.00* LA 0.00* MA 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.02 HN 1.06 KP 0.98 LA 1.00 ! NL 0.94 PT 1.01 SC 1.01 WF 1.01 ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.05 NL 0.96 SC 1.04 WF 0.92 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.01 HN 1.06 KP 0.95 LA 0.99 ! MK 0.88 NL 0.96 PT 1.00 SC 1.00 ! WF 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 0.98 HN 1.20 KP 0.97 LA 1.02 ! MK 0.64 PT 1.02 SC 1.07 WF 0.91 ! ! Telescope amplitude corrections in sub-array 12: ! LA 0.00* PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 0.00* MK 0.00* PT 0.00* ! ! ! Fit before self-cal, rms=0.341450Jy sigma=1.197199 ! Fit after self-cal, rms=0.131736Jy sigma=1.070687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=9.568 mas, bpa=-7.405 degrees ! Estimated noise=1.69352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00626357 Jy ! Component: 100 - total flux cleaned = -0.0073403 Jy ! Component: 150 - total flux cleaned = -0.007052 Jy ! Component: 200 - total flux cleaned = -0.00692059 Jy ! Total flux subtracted in 200 components = -0.00692059 Jy ! Clean residual min=-0.007231 max=0.008234 Jy/beam ! Clean residual mean=0.000062 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.998158 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.998158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131278Jy sigma=1.064095 ! Fit after self-cal, rms=0.131495Jy sigma=1.063724 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131495Jy sigma=1.063724 ! Fit after self-cal, rms=0.131197Jy sigma=1.058673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=9.569 mas, bpa=-7.396 degrees ! Estimated noise=1.69363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265224 Jy ! Component: 100 - total flux cleaned = -0.00253243 Jy ! Component: 150 - total flux cleaned = -0.00230413 Jy ! Component: 200 - total flux cleaned = -0.00208851 Jy ! Total flux subtracted in 200 components = -0.00208851 Jy ! Clean residual min=-0.006841 max=0.007929 Jy/beam ! Clean residual mean=0.000135 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.99607 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.99607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130979Jy sigma=1.055594 ! Fit after self-cal, rms=0.130963Jy sigma=1.055555 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87, -122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703435 Jy ! Component: 100 - total flux cleaned = 0.00848537 Jy ! Component: 150 - total flux cleaned = 0.00849237 Jy ! Component: 200 - total flux cleaned = 0.00849273 Jy ! Total flux subtracted in 200 components = 0.00849273 Jy ! Clean residual min=-0.006472 max=0.007942 Jy/beam ! Clean residual mean=0.000083 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 1.00456 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 1.00456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130398Jy sigma=1.049871 ! Fit after self-cal, rms=0.130344Jy sigma=1.049233 ! Inverting map ! Added new window around map position (-125, -97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065471 Jy ! Component: 100 - total flux cleaned = 0.00840642 Jy ! Component: 150 - total flux cleaned = 0.00914761 Jy ! Component: 200 - total flux cleaned = 0.00972036 Jy ! Total flux subtracted in 200 components = 0.00972036 Jy ! Clean residual min=-0.006472 max=0.007264 Jy/beam ! Clean residual mean=-0.000036 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 1.01428 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 1.01428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129624Jy sigma=1.043038 ! Fit after self-cal, rms=0.129626Jy sigma=1.042680 ! Inverting map ! Added new window around map position (60, -90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401277 Jy ! Component: 100 - total flux cleaned = 0.00469328 Jy ! Component: 150 - total flux cleaned = 0.00482971 Jy ! Component: 200 - total flux cleaned = 0.00496233 Jy ! Total flux subtracted in 200 components = 0.00496233 Jy ! Clean residual min=-0.006500 max=0.006136 Jy/beam ! Clean residual mean=-0.000126 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 1.01925 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 1.01925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129027Jy sigma=1.036074 ! Fit after self-cal, rms=0.129014Jy sigma=1.035427 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129014Jy sigma=1.035427 ! Fit after self-cal, rms=0.127164Jy sigma=1.017278 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=9.568 mas, bpa=-7.374 degrees ! Estimated noise=1.69559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016025 Jy ! Component: 100 - total flux cleaned = 0.00212751 Jy ! Component: 150 - total flux cleaned = 0.00225469 Jy ! Component: 200 - total flux cleaned = 0.00225734 Jy ! Total flux subtracted in 200 components = 0.00225734 Jy ! Clean residual min=-0.006633 max=0.005974 Jy/beam ! Clean residual mean=-0.000078 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 1.0215 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 1.0215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126832Jy sigma=1.014302 ! Fit after self-cal, rms=0.126804Jy sigma=1.014177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485518 Jy ! Component: 100 - total flux cleaned = 0.00059219 Jy ! Component: 150 - total flux cleaned = 0.00038667 Jy ! Component: 200 - total flux cleaned = 0.000389151 Jy ! Total flux subtracted in 200 components = 0.000389151 Jy ! Clean residual min=-0.006572 max=0.005909 Jy/beam ! Clean residual mean=-0.000078 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 1.02189 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 149 components and 1.02189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126540Jy sigma=1.012233 ! Fit after self-cal, rms=0.126546Jy sigma=1.012195 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126546Jy sigma=1.012195 ! Fit after self-cal, rms=0.126196Jy sigma=1.011945 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.847 mas, bmaj=14.35 mas, bpa=-9.471 degrees ! Estimated noise=2.04757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238379 Jy ! Component: 100 - total flux cleaned = -0.000162618 Jy ! Component: 150 - total flux cleaned = -3.34901e-05 Jy ! Component: 200 - total flux cleaned = -3.35485e-05 Jy ! Total flux subtracted in 200 components = -3.35485e-05 Jy ! Clean residual min=-0.005547 max=0.005590 Jy/beam ! Clean residual mean=-0.000103 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 1.02186 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 1.02186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126079Jy sigma=1.010963 ! Fit after self-cal, rms=0.126073Jy sigma=1.010912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328567 Jy ! Component: 100 - total flux cleaned = 0.000389395 Jy ! Component: 150 - total flux cleaned = 0.000445598 Jy ! Component: 200 - total flux cleaned = 0.000499044 Jy ! Total flux subtracted in 200 components = 0.000499044 Jy ! Clean residual min=-0.005446 max=0.005528 Jy/beam ! Clean residual mean=-0.000113 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 1.02236 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 169 components and 1.02236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126002Jy sigma=1.010405 ! Fit after self-cal, rms=0.126004Jy sigma=1.010378 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=9.568 mas, bpa=-7.369 degrees ! Estimated noise=1.6957 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 9.568 at -7.369 degrees (North through East) ! Clean map min=-0.010304 max=0.88827 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126004Jy sigma=1.010378 ! Fit after self-cal, rms=0.122370Jy sigma=0.957352 ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=9.568 mas, bpa=-7.361 degrees ! Estimated noise=1.69578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436812 Jy ! Component: 100 - total flux cleaned = 0.000436491 Jy ! Component: 150 - total flux cleaned = 0.000435115 Jy ! Component: 200 - total flux cleaned = 0.000436489 Jy ! Total flux subtracted in 200 components = 0.000436489 Jy ! Clean residual min=-0.006379 max=0.005953 Jy/beam ! Clean residual mean=-0.000038 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 1.02279 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 181 components and 1.02279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122105Jy sigma=0.955537 ! Fit after self-cal, rms=0.122123Jy sigma=0.955507 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.7883e-06 Jy ! Component: 100 - total flux cleaned = 4.79689e-06 Jy ! Component: 150 - total flux cleaned = 4.40173e-06 Jy ! Component: 200 - total flux cleaned = -8.27219e-05 Jy ! Total flux subtracted in 200 components = -8.27219e-05 Jy ! Clean residual min=-0.006312 max=0.005949 Jy/beam ! Clean residual mean=-0.000038 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 1.02271 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 185 components and 1.02271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121909Jy sigma=0.954111 ! Fit after self-cal, rms=0.121924Jy sigma=0.954097 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121924Jy sigma=0.954097 ! Fit after self-cal, rms=0.121834Jy sigma=0.954011 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.906 mas, bpa=-4.821 degrees ! Estimated noise=2.18087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.676336 Jy ! Component: 100 - total flux cleaned = 0.838985 Jy ! Component: 150 - total flux cleaned = 0.897903 Jy ! Component: 200 - total flux cleaned = 0.927261 Jy ! Total flux subtracted in 200 components = 0.927261 Jy ! Clean residual min=-0.013505 max=0.015588 Jy/beam ! Clean residual mean=0.000040 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 0.927261 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.927261 Jy ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=9.567 mas, bpa=-7.363 degrees ! Estimated noise=1.69599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274312 Jy ! Component: 100 - total flux cleaned = 0.0452625 Jy ! Component: 150 - total flux cleaned = 0.0584895 Jy ! Component: 200 - total flux cleaned = 0.0670693 Jy ! Total flux subtracted in 200 components = 0.0670693 Jy ! Clean residual min=-0.007746 max=0.008932 Jy/beam ! Clean residual mean=0.000427 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.994331 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.994331 Jy ! Inverting map ! Added new window around map position (9, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739376 Jy ! Component: 100 - total flux cleaned = 0.0127013 Jy ! Component: 150 - total flux cleaned = 0.0170372 Jy ! Component: 200 - total flux cleaned = 0.0189666 Jy ! Total flux subtracted in 200 components = 0.0189666 Jy ! Clean residual min=-0.007064 max=0.007552 Jy/beam ! Clean residual mean=0.000100 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 1.0133 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 73 components and 1.0133 Jy ! Inverting map ! Added new window around map position (43.5, -115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388863 Jy ! Component: 100 - total flux cleaned = 0.00453391 Jy ! Component: 150 - total flux cleaned = 0.00573941 Jy ! Component: 200 - total flux cleaned = 0.00631096 Jy ! Total flux subtracted in 200 components = 0.00631096 Jy ! Clean residual min=-0.006871 max=0.006526 Jy/beam ! Clean residual mean=0.000013 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 1.01961 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 95 components and 1.01961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.849 mas, bmaj=14.35 mas, bpa=-9.477 degrees ! Estimated noise=2.04796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353798 Jy ! Component: 100 - total flux cleaned = 0.00512343 Jy ! Component: 150 - total flux cleaned = 0.00595586 Jy ! Component: 200 - total flux cleaned = 0.00624167 Jy ! Total flux subtracted in 200 components = 0.00624167 Jy ! Clean residual min=-0.005667 max=0.005353 Jy/beam ! Clean residual mean=-0.000204 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 1.02585 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268718 Jy ! Component: 100 - total flux cleaned = 0.00060155 Jy ! Component: 150 - total flux cleaned = 0.000756797 Jy ! Component: 200 - total flux cleaned = 0.000833186 Jy ! Total flux subtracted in 200 components = 0.000833186 Jy ! Clean residual min=-0.005638 max=0.005310 Jy/beam ! Clean residual mean=-0.000226 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 1.02668 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 141 components and 1.02668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=9.567 mas, bpa=-7.363 degrees ! Estimated noise=1.69599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00219217 Jy ! Component: 100 - total flux cleaned = -0.00202834 Jy ! Component: 150 - total flux cleaned = -0.0017245 Jy ! Component: 200 - total flux cleaned = -0.0014344 Jy ! Total flux subtracted in 200 components = -0.0014344 Jy ! Clean residual min=-0.006917 max=0.006571 Jy/beam ! Clean residual mean=-0.000061 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.02525 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 158 components and 1.02525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122963Jy sigma=0.962861 ! Fit after self-cal, rms=0.122938Jy sigma=0.961597 wmodel J0927-2034_S_map.mod ! Writing 158 model components to file: J0927-2034_S_map.mod wobs J0927-2034_S_uvs.fits ! Writing UV FITS file: J0927-2034_S_uvs.fits wwins J0927-2034_S_map.win ! wwins: Wrote 8 windows to J0927-2034_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133835 Jy ! Component: 100 - total flux cleaned = -0.00219358 Jy ! Component: 150 - total flux cleaned = -0.00249348 Jy ! Component: 200 - total flux cleaned = -0.00326231 Jy ! Component: 250 - total flux cleaned = -0.00372708 Jy ! Component: 300 - total flux cleaned = -0.00372761 Jy ! Component: 350 - total flux cleaned = -0.00381705 Jy ! Component: 400 - total flux cleaned = -0.00381627 Jy ! Component: 450 - total flux cleaned = -0.00373157 Jy ! Component: 500 - total flux cleaned = -0.00381569 Jy ! Component: 550 - total flux cleaned = -0.00373197 Jy ! Component: 600 - total flux cleaned = -0.00357042 Jy ! Component: 650 - total flux cleaned = -0.00341119 Jy ! Component: 700 - total flux cleaned = -0.0033321 Jy ! Component: 750 - total flux cleaned = -0.00302293 Jy ! Component: 800 - total flux cleaned = -0.00294692 Jy ! Component: 850 - total flux cleaned = -0.00287179 Jy ! Component: 900 - total flux cleaned = -0.00272296 Jy ! Component: 950 - total flux cleaned = -0.00272339 Jy ! Component: 1000 - total flux cleaned = -0.00286844 Jy ! Component: 1050 - total flux cleaned = -0.0027968 Jy ! Component: 1100 - total flux cleaned = -0.00286857 Jy ! Component: 1150 - total flux cleaned = -0.0028687 Jy ! Component: 1200 - total flux cleaned = -0.0030086 Jy ! Component: 1250 - total flux cleaned = -0.00314601 Jy ! Component: 1300 - total flux cleaned = -0.0032816 Jy ! Component: 1350 - total flux cleaned = -0.00321348 Jy ! Component: 1400 - total flux cleaned = -0.00328056 Jy ! Component: 1450 - total flux cleaned = -0.00341272 Jy ! Component: 1500 - total flux cleaned = -0.00341222 Jy ! Component: 1550 - total flux cleaned = -0.00334684 Jy ! Component: 1600 - total flux cleaned = -0.00334743 Jy ! Component: 1650 - total flux cleaned = -0.00347508 Jy ! Component: 1700 - total flux cleaned = -0.00366413 Jy ! Component: 1750 - total flux cleaned = -0.00372584 Jy ! Component: 1800 - total flux cleaned = -0.0036636 Jy ! Component: 1850 - total flux cleaned = -0.00378731 Jy ! Component: 1900 - total flux cleaned = -0.00403163 Jy ! Component: 1950 - total flux cleaned = -0.00409231 Jy ! Component: 2000 - total flux cleaned = -0.00421279 Jy ! Component: 2050 - total flux cleaned = -0.00427324 Jy ! Component: 2100 - total flux cleaned = -0.00445163 Jy ! Component: 2150 - total flux cleaned = -0.00451052 Jy ! Component: 2200 - total flux cleaned = -0.00451069 Jy ! Component: 2250 - total flux cleaned = -0.00468529 Jy ! Component: 2300 - total flux cleaned = -0.00468513 Jy ! Component: 2350 - total flux cleaned = -0.00462759 Jy ! Component: 2400 - total flux cleaned = -0.00468485 Jy ! Component: 2450 - total flux cleaned = -0.00479868 Jy ! Component: 2500 - total flux cleaned = -0.00474247 Jy ! Component: 2550 - total flux cleaned = -0.00491019 Jy ! Component: 2600 - total flux cleaned = -0.0049658 Jy ! Component: 2650 - total flux cleaned = -0.00502124 Jy ! Component: 2700 - total flux cleaned = -0.00502148 Jy ! Component: 2750 - total flux cleaned = -0.00502144 Jy ! Component: 2800 - total flux cleaned = -0.00512995 Jy ! Component: 2850 - total flux cleaned = -0.00507613 Jy ! Component: 2900 - total flux cleaned = -0.00507586 Jy ! Component: 2950 - total flux cleaned = -0.00502238 Jy ! Component: 3000 - total flux cleaned = -0.00507546 Jy ! Component: 3050 - total flux cleaned = -0.00512805 Jy ! Component: 3100 - total flux cleaned = -0.00512795 Jy ! Component: 3150 - total flux cleaned = -0.00523224 Jy ! Component: 3200 - total flux cleaned = -0.00528399 Jy ! Component: 3250 - total flux cleaned = -0.00523211 Jy ! Component: 3300 - total flux cleaned = -0.00528327 Jy ! Component: 3350 - total flux cleaned = -0.00538547 Jy ! Component: 3400 - total flux cleaned = -0.00533466 Jy ! Component: 3450 - total flux cleaned = -0.0052839 Jy ! Component: 3500 - total flux cleaned = -0.00523363 Jy ! Component: 3550 - total flux cleaned = -0.00523368 Jy ! Component: 3600 - total flux cleaned = -0.00543287 Jy ! Component: 3650 - total flux cleaned = -0.00533358 Jy ! Component: 3700 - total flux cleaned = -0.00528451 Jy ! Component: 3750 - total flux cleaned = -0.00538263 Jy ! Component: 3800 - total flux cleaned = -0.00533387 Jy ! Component: 3850 - total flux cleaned = -0.00528525 Jy ! Component: 3900 - total flux cleaned = -0.00533381 Jy ! Component: 3950 - total flux cleaned = -0.00542995 Jy ! Component: 4000 - total flux cleaned = -0.00542967 Jy ! Component: 4050 - total flux cleaned = -0.00542989 Jy ! Total flux subtracted in 4096 components = -0.00547735 Jy ! Clean residual min=-0.002682 max=0.002615 Jy/beam ! Clean residual mean=-0.000000 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.01977 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 446 components and 1.01977 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0927-2034_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 9.567 at -7.363 degrees (North through East) ! Clean map min=-0.0083164 max=0.88755 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0927-2034_S_map.fits wmodel /scr/pima/rv102_uvs/J0927-2034_S_map.mod ! Writing 446 model components to file: /scr/pima/rv102_uvs/J0927-2034_S_map.mod wobs /scr/pima/rv102_uvs/J0927-2034_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0927-2034_S_uvs.fits wwins /scr/pima/rv102_uvs/J0927-2034_S_map.win ! wwins: Wrote 9 windows to /scr/pima/rv102_uvs/J0927-2034_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.887553 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000881814 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.29806 0.29806 0.59612 1.19224 2.38448 4.76896 9.53792 19.0758 38.1517 76.3034 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.887 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1006.51 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0927-2034_S_dfm.log closed on Sat Nov 9 09:33:19 2019