! Started logfile: /scr/pima/rv102_uvs/J0915-3029_X_dfm.log on Sat Nov 9 10:18:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J0915-3029_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0915-3029_X_uva.fits ! AN table 1: 174 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.990421 visibilities/baseline/integration-bin. ! Found source: J0915-3029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 10340 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0915-3029_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007430Jy sigma=18.306710 ! Fit after self-cal, rms=0.938047Jy sigma=17.054171 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5309 mas, bmaj=1.591 mas, bpa=-6.868 degrees ! Estimated noise=0.976194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537989 Jy ! Component: 100 - total flux cleaned = 0.0654355 Jy ! Total flux subtracted in 100 components = 0.0654355 Jy ! Clean residual min=-0.007150 max=0.006624 Jy/beam ! Clean residual mean=0.000002 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.0654355 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0654355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094181Jy sigma=1.622290 ! Fit after self-cal, rms=0.093000Jy sigma=1.601290 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6982 mas, bmaj=1.898 mas, bpa=-6.363 degrees ! Estimated noise=0.392557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35938e-05 Jy ! Component: 100 - total flux cleaned = -0.000207612 Jy ! Component: 150 - total flux cleaned = -0.000308547 Jy ! Component: 200 - total flux cleaned = -0.000418307 Jy ! Total flux subtracted in 200 components = -0.000418307 Jy ! Clean residual min=-0.003373 max=0.003210 Jy/beam ! Clean residual mean=0.000006 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0650172 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.0650172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092869Jy sigma=1.599641 ! Fit after self-cal, rms=0.092752Jy sigma=1.599162 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6982 x 1.898 at -6.363 degrees (North through East) ! Clean map min=-0.0028491 max=0.0678 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 1.04 LA 1.08 MK 1.05 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.08 LA 0.97 MK 1.01 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.06 LA 0.92 MK 0.92 ! PT 1.10 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.82 KP 1.00 LA 0.99 MK 0.86 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.092752Jy sigma=1.599162 ! Fit after self-cal, rms=0.089843Jy sigma=1.593526 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6881 mas, bmaj=1.883 mas, bpa=-6.672 degrees ! Estimated noise=0.388803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032833 Jy ! Component: 100 - total flux cleaned = 0.00028896 Jy ! Component: 150 - total flux cleaned = 0.000271012 Jy ! Component: 200 - total flux cleaned = 0.000270971 Jy ! Total flux subtracted in 200 components = 0.000270971 Jy ! Clean residual min=-0.002548 max=0.002577 Jy/beam ! Clean residual mean=-0.000001 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0652882 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 13 components and 0.0652882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089834Jy sigma=1.593379 ! Fit after self-cal, rms=0.089890Jy sigma=1.591936 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089890Jy sigma=1.591936 ! Fit after self-cal, rms=0.090190Jy sigma=1.590737 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6848 mas, bmaj=1.876 mas, bpa=-6.893 degrees ! Estimated noise=0.389171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395006 Jy ! Component: 100 - total flux cleaned = 0.000353485 Jy ! Component: 150 - total flux cleaned = 0.000339193 Jy ! Component: 200 - total flux cleaned = 0.000327853 Jy ! Total flux subtracted in 200 components = 0.000327853 Jy ! Clean residual min=-0.002439 max=0.002432 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.065616 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.065616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090183Jy sigma=1.590636 ! Fit after self-cal, rms=0.090240Jy sigma=1.590329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.77574e-05 Jy ! Component: 100 - total flux cleaned = -0.000103373 Jy ! Component: 150 - total flux cleaned = -0.000103114 Jy ! Component: 200 - total flux cleaned = -0.000115553 Jy ! Total flux subtracted in 200 components = -0.000115553 Jy ! Clean residual min=-0.002452 max=0.002449 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0655005 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 16 components and 0.0655005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090235Jy sigma=1.590249 ! Fit after self-cal, rms=0.090232Jy sigma=1.590138 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090232Jy sigma=1.590138 ! Fit after self-cal, rms=0.090221Jy sigma=1.589453 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6839 mas, bmaj=1.869 mas, bpa=-7.006 degrees ! Estimated noise=0.387495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206389 Jy ! Component: 100 - total flux cleaned = 0.000132293 Jy ! Component: 150 - total flux cleaned = 7.32627e-05 Jy ! Component: 200 - total flux cleaned = 5.33163e-05 Jy ! Total flux subtracted in 200 components = 5.33163e-05 Jy ! Clean residual min=-0.002443 max=0.002365 Jy/beam ! Clean residual mean=-0.000003 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0655538 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.0655538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090215Jy sigma=1.589389 ! Fit after self-cal, rms=0.090262Jy sigma=1.589026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.6805e-05 Jy ! Component: 100 - total flux cleaned = -7.37926e-05 Jy ! Component: 150 - total flux cleaned = -0.000120883 Jy ! Component: 200 - total flux cleaned = -0.00012907 Jy ! Total flux subtracted in 200 components = -0.00012907 Jy ! Clean residual min=-0.002494 max=0.002389 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0654247 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.0654247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090259Jy sigma=1.588988 ! Fit after self-cal, rms=0.090257Jy sigma=1.588978 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090257Jy sigma=1.588978 ! Fit after self-cal, rms=0.090062Jy sigma=1.588892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=7.845 mas, bpa=-3.263 degrees ! Estimated noise=0.576042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29933e-05 Jy ! Component: 100 - total flux cleaned = -4.42582e-05 Jy ! Component: 150 - total flux cleaned = -4.4882e-05 Jy ! Component: 200 - total flux cleaned = -4.52275e-05 Jy ! Total flux subtracted in 200 components = -4.52275e-05 Jy ! Clean residual min=-0.002537 max=0.002864 Jy/beam ! Clean residual mean=-0.000006 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0653795 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 26 components and 0.0653795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090063Jy sigma=1.588911 ! Fit after self-cal, rms=0.090080Jy sigma=1.588693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2185e-05 Jy ! Component: 100 - total flux cleaned = -3.20325e-05 Jy ! Component: 150 - total flux cleaned = -3.22471e-05 Jy ! Component: 200 - total flux cleaned = -3.24491e-05 Jy ! Total flux subtracted in 200 components = -3.24491e-05 Jy ! Clean residual min=-0.002508 max=0.002816 Jy/beam ! Clean residual mean=-0.000006 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0653471 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 26 components and 0.0653471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090081Jy sigma=1.588710 ! Fit after self-cal, rms=0.090079Jy sigma=1.588667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6832 mas, bmaj=1.864 mas, bpa=-7.059 degrees ! Estimated noise=0.385789 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6832 x 1.864 at -7.059 degrees (North through East) ! Clean map min=-0.0020421 max=0.066792 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.525 mas, bmaj=1.579 mas, bpa=-7.575 degrees ! Estimated noise=0.927271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529868 Jy ! Component: 100 - total flux cleaned = 0.0645414 Jy ! Component: 150 - total flux cleaned = 0.0650931 Jy ! Component: 200 - total flux cleaned = 0.0660002 Jy ! Total flux subtracted in 200 components = 0.0660002 Jy ! Clean residual min=-0.006307 max=0.005592 Jy/beam ! Clean residual mean=-0.000002 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.0660002 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0660002 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6832 mas, bmaj=1.864 mas, bpa=-7.059 degrees ! Estimated noise=0.385789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000651403 Jy ! Component: 100 - total flux cleaned = -0.000696061 Jy ! Component: 150 - total flux cleaned = -0.000733612 Jy ! Component: 200 - total flux cleaned = -0.00067219 Jy ! Total flux subtracted in 200 components = -0.00067219 Jy ! Clean residual min=-0.002349 max=0.002416 Jy/beam ! Clean residual mean=-0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.065328 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.065328 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=7.845 mas, bpa=-3.263 degrees ! Estimated noise=0.576042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28767e-06 Jy ! Component: 100 - total flux cleaned = -4.56766e-06 Jy ! Component: 150 - total flux cleaned = -5.29305e-06 Jy ! Component: 200 - total flux cleaned = -5.83134e-06 Jy ! Total flux subtracted in 200 components = -5.83134e-06 Jy ! Clean residual min=-0.002501 max=0.002901 Jy/beam ! Clean residual mean=-0.000006 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.0653222 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.48385e-07 Jy ! Component: 100 - total flux cleaned = -8.36249e-07 Jy ! Component: 150 - total flux cleaned = -1.17553e-06 Jy ! Component: 200 - total flux cleaned = -1.46529e-06 Jy ! Total flux subtracted in 200 components = -1.46529e-06 Jy ! Clean residual min=-0.002496 max=0.002803 Jy/beam ! Clean residual mean=-0.000006 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0653208 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 18 components and 0.0653208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6832 mas, bmaj=1.864 mas, bpa=-7.059 degrees ! Estimated noise=0.385789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301601 Jy ! Component: 100 - total flux cleaned = -0.0001839 Jy ! Component: 150 - total flux cleaned = -0.000116212 Jy ! Component: 200 - total flux cleaned = -9.66427e-05 Jy ! Total flux subtracted in 200 components = -9.66427e-05 Jy ! Clean residual min=-0.002351 max=0.002246 Jy/beam ! Clean residual mean=-0.000003 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0652241 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0652241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090090Jy sigma=1.588939 ! Fit after self-cal, rms=0.090092Jy sigma=1.588857 wmodel J0915-3029_X_map.mod ! Writing 25 model components to file: J0915-3029_X_map.mod wobs J0915-3029_X_uvs.fits ! Writing UV FITS file: J0915-3029_X_uvs.fits wwins J0915-3029_X_map.win ! wwins: Wrote 1 windows to J0915-3029_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167718 Jy ! Component: 100 - total flux cleaned = -0.000246579 Jy ! Component: 150 - total flux cleaned = -0.000321169 Jy ! Component: 200 - total flux cleaned = -0.000356899 Jy ! Component: 250 - total flux cleaned = -0.000391252 Jy ! Component: 300 - total flux cleaned = -0.000423985 Jy ! Component: 350 - total flux cleaned = -0.00055101 Jy ! Component: 400 - total flux cleaned = -0.000766066 Jy ! Component: 450 - total flux cleaned = -0.000825268 Jy ! Component: 500 - total flux cleaned = -0.000883348 Jy ! Component: 550 - total flux cleaned = -0.00102509 Jy ! Component: 600 - total flux cleaned = -0.00116294 Jy ! Component: 650 - total flux cleaned = -0.00124392 Jy ! Component: 700 - total flux cleaned = -0.00132335 Jy ! Component: 750 - total flux cleaned = -0.00129766 Jy ! Component: 800 - total flux cleaned = -0.00137446 Jy ! Component: 850 - total flux cleaned = -0.00144948 Jy ! Component: 900 - total flux cleaned = -0.00140041 Jy ! Component: 950 - total flux cleaned = -0.00144929 Jy ! Component: 1000 - total flux cleaned = -0.00147319 Jy ! Component: 1050 - total flux cleaned = -0.0014729 Jy ! Component: 1100 - total flux cleaned = -0.00149622 Jy ! Component: 1150 - total flux cleaned = -0.00151908 Jy ! Component: 1200 - total flux cleaned = -0.00156407 Jy ! Component: 1250 - total flux cleaned = -0.00171965 Jy ! Component: 1300 - total flux cleaned = -0.00169766 Jy ! Component: 1350 - total flux cleaned = -0.00176281 Jy ! Component: 1400 - total flux cleaned = -0.00180587 Jy ! Component: 1450 - total flux cleaned = -0.00186961 Jy ! Component: 1500 - total flux cleaned = -0.00195334 Jy ! Component: 1550 - total flux cleaned = -0.00203575 Jy ! Component: 1600 - total flux cleaned = -0.00207636 Jy ! Component: 1650 - total flux cleaned = -0.00217717 Jy ! Component: 1700 - total flux cleaned = -0.00223691 Jy ! Component: 1750 - total flux cleaned = -0.00229615 Jy ! Component: 1800 - total flux cleaned = -0.00235467 Jy ! Component: 1850 - total flux cleaned = -0.00245106 Jy ! Component: 1900 - total flux cleaned = -0.00248903 Jy ! Component: 1950 - total flux cleaned = -0.00252647 Jy ! Component: 2000 - total flux cleaned = -0.00256379 Jy ! Component: 2050 - total flux cleaned = -0.00265572 Jy ! Component: 2100 - total flux cleaned = -0.00263745 Jy ! Component: 2150 - total flux cleaned = -0.00269185 Jy ! Component: 2200 - total flux cleaned = -0.0027991 Jy ! Component: 2250 - total flux cleaned = -0.00281669 Jy ! Component: 2300 - total flux cleaned = -0.00283455 Jy ! Component: 2350 - total flux cleaned = -0.00288674 Jy ! Component: 2400 - total flux cleaned = -0.00295545 Jy ! Component: 2450 - total flux cleaned = -0.00290442 Jy ! Component: 2500 - total flux cleaned = -0.00295522 Jy ! Component: 2550 - total flux cleaned = -0.00303865 Jy ! Component: 2600 - total flux cleaned = -0.00302204 Jy ! Component: 2650 - total flux cleaned = -0.00308764 Jy ! Component: 2700 - total flux cleaned = -0.00313635 Jy ! Component: 2750 - total flux cleaned = -0.00318447 Jy ! Component: 2800 - total flux cleaned = -0.0032003 Jy ! Component: 2850 - total flux cleaned = -0.00320037 Jy ! Component: 2900 - total flux cleaned = -0.00326316 Jy ! Component: 2950 - total flux cleaned = -0.00326324 Jy ! Component: 3000 - total flux cleaned = -0.0033406 Jy ! Component: 3050 - total flux cleaned = -0.00340179 Jy ! Component: 3100 - total flux cleaned = -0.00340183 Jy ! Component: 3150 - total flux cleaned = -0.00338677 Jy ! Component: 3200 - total flux cleaned = -0.0034766 Jy ! Component: 3250 - total flux cleaned = -0.00341724 Jy ! Component: 3300 - total flux cleaned = -0.00350546 Jy ! Component: 3350 - total flux cleaned = -0.00351993 Jy ! Component: 3400 - total flux cleaned = -0.0035199 Jy ! Component: 3450 - total flux cleaned = -0.00351987 Jy ! Component: 3500 - total flux cleaned = -0.00356261 Jy ! Component: 3550 - total flux cleaned = -0.00359096 Jy ! Component: 3600 - total flux cleaned = -0.00364749 Jy ! Component: 3650 - total flux cleaned = -0.00371744 Jy ! Component: 3700 - total flux cleaned = -0.00378681 Jy ! Component: 3750 - total flux cleaned = -0.00381434 Jy ! Component: 3800 - total flux cleaned = -0.0038691 Jy ! Component: 3850 - total flux cleaned = -0.00389631 Jy ! Component: 3900 - total flux cleaned = -0.00393676 Jy ! Component: 3950 - total flux cleaned = -0.00396363 Jy ! Component: 4000 - total flux cleaned = -0.00401682 Jy ! Component: 4050 - total flux cleaned = -0.00403002 Jy ! Total flux subtracted in 4096 components = -0.00409579 Jy ! Clean residual min=-0.000908 max=0.000790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0611283 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 257 components and 0.0611283 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0915-3029_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6832 x 1.864 at -7.059 degrees (North through East) ! Clean map min=-0.0025561 max=0.06664 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0915-3029_X_map.fits wmodel /scr/pima/rv102_uvs/J0915-3029_X_map.mod ! Writing 257 model components to file: /scr/pima/rv102_uvs/J0915-3029_X_map.mod wobs /scr/pima/rv102_uvs/J0915-3029_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0915-3029_X_uvs.fits wwins /scr/pima/rv102_uvs/J0915-3029_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J0915-3029_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0666397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223244 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.005 1.005 2.01001 4.02001 8.04002 16.08 32.1601 64.3202 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 298.506 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0915-3029_X_dfm.log closed on Sat Nov 9 10:18:24 2019