! Started logfile: /scr/pima/rv102_uvs/J0805+6144_S_dfm.log on Sat Nov 9 09:32:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J0805+6144_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0805+6144_S_uva.fits ! AN table 1: 102 integrations on 10 of 10 possible baselines. ! AN table 2: 29 integrations on 10 of 10 possible baselines. ! AN table 3: 55 integrations on 6 of 6 possible baselines. ! AN table 4: 2 integrations on 6 of 6 possible baselines. ! AN table 5: 18 integrations on 66 of 66 possible baselines. ! AN table 6: 15 integrations on 3 of 3 possible baselines. ! AN table 7: 14 integrations on 1 of 1 possible baselines. ! AN table 8: 3 integrations on 1 of 1 possible baselines. ! AN table 9: 3 integrations on 1 of 1 possible baselines. ! AN table 10: 18 integrations on 3 of 3 possible baselines. ! AN table 11: 29 integrations on 66 of 66 possible baselines. ! AN table 12: 3 integrations on 6 of 6 possible baselines. ! AN table 13: 2 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.685469 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 13416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0805+6144_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 148 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 80 telescope corrections were flagged in sub-array 3. ! A total of 50 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! A total of 57 telescope corrections were flagged in sub-array 2. ! A total of 160 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 54 telescope corrections were flagged in sub-array 10. ! A total of 105 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 80 telescope corrections were flagged in sub-array 3. ! A total of 50 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! A total of 57 telescope corrections were flagged in sub-array 2. ! A total of 160 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 54 telescope corrections were flagged in sub-array 10. ! A total of 105 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! ! Fit before self-cal, rms=1.407020Jy sigma=7.103701 ! Fit after self-cal, rms=0.522310Jy sigma=1.976830 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.119 mas, bmaj=3.199 mas, bpa=74.58 degrees ! Estimated noise=2.59316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.573843 Jy ! Component: 100 - total flux cleaned = 0.796215 Jy ! Total flux subtracted in 100 components = 0.796215 Jy ! Clean residual min=-0.034609 max=0.101561 Jy/beam ! Clean residual mean=0.000167 rms=0.007687 Jy/beam ! Combined flux in latest and established models = 0.796215 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.796215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438632Jy sigma=1.299936 ! Fit after self-cal, rms=0.436035Jy sigma=1.294953 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115319 Jy ! Component: 100 - total flux cleaned = 0.176705 Jy ! Total flux subtracted in 100 components = 0.176705 Jy ! Clean residual min=-0.027532 max=0.039253 Jy/beam ! Clean residual mean=0.000104 rms=0.005863 Jy/beam ! Combined flux in latest and established models = 0.97292 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.97292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383229Jy sigma=0.975353 ! Fit after self-cal, rms=0.381789Jy sigma=0.972368 ! Inverting map ! Added new window around map position (2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435426 Jy ! Component: 100 - total flux cleaned = 0.0707005 Jy ! Total flux subtracted in 100 components = 0.0707005 Jy ! Clean residual min=-0.027265 max=0.033877 Jy/beam ! Clean residual mean=0.000080 rms=0.005632 Jy/beam ! Combined flux in latest and established models = 1.04362 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 1.04362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370122Jy sigma=0.942161 ! Fit after self-cal, rms=0.369597Jy sigma=0.939813 ! Inverting map ! Added new window around map position (10, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260544 Jy ! Component: 100 - total flux cleaned = 0.0320838 Jy ! Total flux subtracted in 100 components = 0.0320838 Jy ! Clean residual min=-0.026228 max=0.029123 Jy/beam ! Clean residual mean=0.000070 rms=0.005454 Jy/beam ! Combined flux in latest and established models = 1.0757 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 1.0757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365955Jy sigma=0.930047 ! Fit after self-cal, rms=0.365830Jy sigma=0.928238 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=3.626 mas, bpa=76.18 degrees ! Estimated noise=1.51421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155462 Jy ! Component: 100 - total flux cleaned = -0.00114455 Jy ! Component: 150 - total flux cleaned = -0.000478126 Jy ! Component: 200 - total flux cleaned = -0.00105673 Jy ! Total flux subtracted in 200 components = -0.00105673 Jy ! Clean residual min=-0.020851 max=0.018192 Jy/beam ! Clean residual mean=0.000628 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 1.07465 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 1.07465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365563Jy sigma=0.919367 ! Fit after self-cal, rms=0.365588Jy sigma=0.918822 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.505 x 3.626 at 76.18 degrees (North through East) ! Clean map min=-0.019428 max=0.74965 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.70 NY 0.97 ON 0.96 WF 0.97 ! WZ 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.60 MK 0.92 NY 0.99 ON 1.03 ! WF 0.88 ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.85 NY 0.96 ON 0.97 WZ 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! KP 1.01 LA 1.07 NL 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.07 HN 0.94 KP 1.01 LA 1.01 ! MA 1.03 NL 0.98 NY 0.98 ON 0.94 ! PT 0.98 SC 1.06 WF 0.96 WZ 1.90 ! ! A total of 24 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.07 HN 0.97 KP 0.95 LA 1.00 ! MA 0.99 MK 1.57 NY 0.95 ON 0.97 ! PT 1.01 SC 1.05 WF 1.02 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.89 NL 1.08 SC 1.11 WF 0.98 ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* WF 0.00* ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 0.93 ON 0.99 WF 1.00 ! WZ 1.00 ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* MK 1.13 NY 0.98 ON 1.07 ! WF 0.93 ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KP 1.08 LA 1.02 NL 0.98 PT 1.08 ! ! A total of 9 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 1.07 HN 0.97 KP 1.05 LA 0.99 ! MA 1.00* NL 1.02 NY 0.99 ON 0.96 ! PT 1.01 SC 1.09 WF 0.98 WZ 2.02 ! ! A total of 24 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.03 HN 0.99 KP 0.96 LA 0.98 ! MA 1.00* MK 0.94 NY 0.99 ON 1.01 ! PT 1.00 SC 1.01 WF 1.04 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.88 NL 1.13 SC 1.13 WF 0.97 ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* WF 0.00* ! ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.47 NY 1.00 ON 1.02 WF 0.97 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.55 MK 1.18 NY 1.04 ON 1.00 ! WF 0.95 ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.48 NY 0.98 ON 1.02 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! KP 1.08 LA 1.00 NL 0.97 PT 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.08 HN 0.98 KP 1.06 LA 0.97 ! MA 0.44 NL 1.02 NY 1.00 ON 0.98 ! PT 1.04 SC 1.14 WF 0.96 WZ 2.19 ! ! A total of 24 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.06 HN 1.00 KP 1.00 LA 1.01 ! MA 0.49 MK 1.03 NY 1.03 ON 1.04 ! PT 1.05 SC 1.04 WF 1.05 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.96 NL 1.00 SC 1.16 WF 0.97 ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* WF 0.00* ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.00* NY 1.03 ON 1.03 WF 0.97 ! WZ 1.01 ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* MK 0.80 NY 1.05 ON 1.04 ! WF 0.93 ! ! A total of 60 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KP 1.01 LA 1.07 NL 0.99 PT 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 1.10 HN 1.02 KP 1.04 LA 1.03 ! MA 1.00* NL 0.98 NY 1.06 ON 0.97 ! PT 1.01 SC 1.10 WF 0.95 WZ 2.60 ! ! A total of 24 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.07 HN 1.04 KP 0.99 LA 1.00 ! MA 1.00* MK 1.11 NY 1.02 ON 1.05 ! PT 1.02 SC 1.04 WF 1.02 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.95 NL 1.00 SC 1.26 WF 0.98 ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=0.365588Jy sigma=0.918822 ! Fit after self-cal, rms=0.205755Jy sigma=0.693907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=3.642 mas, bpa=75.71 degrees ! Estimated noise=1.54792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144742 Jy ! Component: 100 - total flux cleaned = 0.00291133 Jy ! Component: 150 - total flux cleaned = 0.00351483 Jy ! Component: 200 - total flux cleaned = 0.00420717 Jy ! Total flux subtracted in 200 components = 0.00420717 Jy ! Clean residual min=-0.005330 max=0.006658 Jy/beam ! Clean residual mean=0.000308 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 1.07886 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 1.07886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205145Jy sigma=0.690230 ! Fit after self-cal, rms=0.204813Jy sigma=0.689445 ! Inverting map ! Added new window around map position (17, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050885 Jy ! Component: 100 - total flux cleaned = 0.00580098 Jy ! Component: 150 - total flux cleaned = 0.0064 Jy ! Component: 200 - total flux cleaned = 0.00666385 Jy ! Total flux subtracted in 200 components = 0.00666385 Jy ! Clean residual min=-0.005225 max=0.006093 Jy/beam ! Clean residual mean=0.000241 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 1.08552 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 1.08552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204498Jy sigma=0.687224 ! Fit after self-cal, rms=0.204470Jy sigma=0.686930 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204470Jy sigma=0.686930 ! Fit after self-cal, rms=0.200447Jy sigma=0.674330 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=3.643 mas, bpa=75.6 degrees ! Estimated noise=1.54985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171668 Jy ! Component: 100 - total flux cleaned = 0.00308562 Jy ! Component: 150 - total flux cleaned = 0.00365323 Jy ! Component: 200 - total flux cleaned = 0.00394786 Jy ! Total flux subtracted in 200 components = 0.00394786 Jy ! Clean residual min=-0.004243 max=0.005438 Jy/beam ! Clean residual mean=0.000204 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 1.08947 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 1.08947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200263Jy sigma=0.673246 ! Fit after self-cal, rms=0.200247Jy sigma=0.673125 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (82.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038258 Jy ! Component: 100 - total flux cleaned = 0.00447149 Jy ! Component: 150 - total flux cleaned = 0.00474687 Jy ! Component: 200 - total flux cleaned = 0.004914 Jy ! Total flux subtracted in 200 components = 0.004914 Jy ! Clean residual min=-0.004156 max=0.004892 Jy/beam ! Clean residual mean=0.000160 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 1.09438 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 1.09438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200068Jy sigma=0.672228 ! Fit after self-cal, rms=0.200040Jy sigma=0.672132 ! Inverting map ! Added new window around map position (54.5, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024374 Jy ! Component: 100 - total flux cleaned = 0.00253625 Jy ! Component: 150 - total flux cleaned = 0.00289679 Jy ! Component: 200 - total flux cleaned = 0.00298097 Jy ! Total flux subtracted in 200 components = 0.00298097 Jy ! Clean residual min=-0.004213 max=0.004492 Jy/beam ! Clean residual mean=0.000134 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 1.09736 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 1.09736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199884Jy sigma=0.671294 ! Fit after self-cal, rms=0.199889Jy sigma=0.671209 ! Inverting map ! Added new window around map position (-120, -74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292169 Jy ! Component: 100 - total flux cleaned = 0.00330693 Jy ! Component: 150 - total flux cleaned = 0.00374295 Jy ! Component: 200 - total flux cleaned = 0.00382552 Jy ! Total flux subtracted in 200 components = 0.00382552 Jy ! Clean residual min=-0.004069 max=0.004097 Jy/beam ! Clean residual mean=0.000115 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 1.10119 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 114 components and 1.10119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199766Jy sigma=0.670469 ! Fit after self-cal, rms=0.199745Jy sigma=0.670419 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199745Jy sigma=0.670419 ! Fit after self-cal, rms=0.199515Jy sigma=0.668916 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=3.643 mas, bpa=75.47 degrees ! Estimated noise=1.55086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160483 Jy ! Component: 100 - total flux cleaned = 0.00169442 Jy ! Component: 150 - total flux cleaned = 0.00185921 Jy ! Component: 200 - total flux cleaned = 0.00194015 Jy ! Total flux subtracted in 200 components = 0.00194015 Jy ! Clean residual min=-0.004227 max=0.004302 Jy/beam ! Clean residual mean=0.000117 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 1.10313 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 1.10313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199432Jy sigma=0.668481 ! Fit after self-cal, rms=0.199417Jy sigma=0.668454 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724218 Jy ! Component: 100 - total flux cleaned = 0.0008704 Jy ! Component: 150 - total flux cleaned = 0.000871048 Jy ! Component: 200 - total flux cleaned = 0.000870495 Jy ! Total flux subtracted in 200 components = 0.000870495 Jy ! Clean residual min=-0.004172 max=0.004124 Jy/beam ! Clean residual mean=0.000109 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 1.104 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 129 components and 1.104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199358Jy sigma=0.668189 ! Fit after self-cal, rms=0.199357Jy sigma=0.668179 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199357Jy sigma=0.668179 ! Fit after self-cal, rms=0.199538Jy sigma=0.668109 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.206 mas, bmaj=12.74 mas, bpa=-54.72 degrees ! Estimated noise=2.31592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016778 Jy ! Component: 100 - total flux cleaned = 0.00212154 Jy ! Component: 150 - total flux cleaned = 0.0022228 Jy ! Component: 200 - total flux cleaned = 0.00236267 Jy ! Total flux subtracted in 200 components = 0.00236267 Jy ! Clean residual min=-0.003577 max=0.004205 Jy/beam ! Clean residual mean=0.000269 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 1.10636 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 1.10636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199494Jy sigma=0.668043 ! Fit after self-cal, rms=0.199496Jy sigma=0.668015 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498281 Jy ! Component: 100 - total flux cleaned = 0.000499664 Jy ! Component: 150 - total flux cleaned = 0.000499591 Jy ! Component: 200 - total flux cleaned = 0.000462775 Jy ! Total flux subtracted in 200 components = 0.000462775 Jy ! Clean residual min=-0.003600 max=0.004225 Jy/beam ! Clean residual mean=0.000253 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 1.10682 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 143 components and 1.10682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199480Jy sigma=0.668012 ! Fit after self-cal, rms=0.199483Jy sigma=0.668004 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=3.643 mas, bpa=75.4 degrees ! Estimated noise=1.55218 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.453 x 3.643 at 75.4 degrees (North through East) ! Clean map min=-0.0038937 max=0.74583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199483Jy sigma=0.668004 ! Fit after self-cal, rms=0.587042Jy sigma=0.540262 ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=3.646 mas, bpa=75.35 degrees ! Estimated noise=1.5552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745047 Jy ! Component: 100 - total flux cleaned = 0.000891511 Jy ! Component: 150 - total flux cleaned = 0.00102622 Jy ! Component: 200 - total flux cleaned = 0.00109048 Jy ! Total flux subtracted in 200 components = 0.00109048 Jy ! Clean residual min=-0.004030 max=0.003676 Jy/beam ! Clean residual mean=0.000057 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 1.10791 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 1.10791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.587013Jy sigma=0.539916 ! Fit after self-cal, rms=0.587186Jy sigma=0.539892 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283217 Jy ! Component: 100 - total flux cleaned = 0.00040391 Jy ! Component: 150 - total flux cleaned = 0.000461347 Jy ! Component: 200 - total flux cleaned = 0.000517013 Jy ! Total flux subtracted in 200 components = 0.000517013 Jy ! Clean residual min=-0.004012 max=0.003592 Jy/beam ! Clean residual mean=0.000053 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 1.10843 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 165 components and 1.10843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.587167Jy sigma=0.539660 ! Fit after self-cal, rms=0.587272Jy sigma=0.539651 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.587272Jy sigma=0.539651 ! Fit after self-cal, rms=0.577817Jy sigma=0.539564 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=3.202 mas, bpa=73.77 degrees ! Estimated noise=2.71941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.565682 Jy ! Component: 100 - total flux cleaned = 0.787001 Jy ! Component: 150 - total flux cleaned = 0.896897 Jy ! Component: 200 - total flux cleaned = 0.955445 Jy ! Total flux subtracted in 200 components = 0.955445 Jy ! Clean residual min=-0.010165 max=0.028650 Jy/beam ! Clean residual mean=0.000072 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 0.955444 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.955444 Jy ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=3.647 mas, bpa=75.3 degrees ! Estimated noise=1.55661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545181 Jy ! Component: 100 - total flux cleaned = 0.0850067 Jy ! Component: 150 - total flux cleaned = 0.103822 Jy ! Component: 200 - total flux cleaned = 0.116111 Jy ! Total flux subtracted in 200 components = 0.116111 Jy ! Clean residual min=-0.004961 max=0.009448 Jy/beam ! Clean residual mean=0.000397 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 1.07155 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 46 components and 1.07155 Jy ! Inverting map ! Added new window around map position (6.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962963 Jy ! Component: 100 - total flux cleaned = 0.0164607 Jy ! Component: 150 - total flux cleaned = 0.0219997 Jy ! Component: 200 - total flux cleaned = 0.0256892 Jy ! Total flux subtracted in 200 components = 0.0256892 Jy ! Clean residual min=-0.003894 max=0.004036 Jy/beam ! Clean residual mean=0.000159 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.09724 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 1.09724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.203 mas, bmaj=12.73 mas, bpa=-54.75 degrees ! Estimated noise=2.32286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584333 Jy ! Component: 100 - total flux cleaned = 0.00827081 Jy ! Component: 150 - total flux cleaned = 0.00893569 Jy ! Component: 200 - total flux cleaned = 0.00959002 Jy ! Total flux subtracted in 200 components = 0.00959002 Jy ! Clean residual min=-0.003823 max=0.004080 Jy/beam ! Clean residual mean=0.000207 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.10683 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494372 Jy ! Component: 100 - total flux cleaned = 0.000925106 Jy ! Component: 150 - total flux cleaned = 0.00114541 Jy ! Component: 200 - total flux cleaned = 0.00139116 Jy ! Total flux subtracted in 200 components = 0.00139116 Jy ! Clean residual min=-0.003873 max=0.004159 Jy/beam ! Clean residual mean=0.000166 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 1.10822 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 115 components and 1.10822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=3.647 mas, bpa=75.3 degrees ! Estimated noise=1.55661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09918e-05 Jy ! Component: 100 - total flux cleaned = -2.07486e-05 Jy ! Component: 150 - total flux cleaned = 0.000169923 Jy ! Component: 200 - total flux cleaned = 0.00034636 Jy ! Total flux subtracted in 200 components = 0.00034636 Jy ! Clean residual min=-0.003866 max=0.003798 Jy/beam ! Clean residual mean=0.000050 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 1.10857 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 1.10857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577724Jy sigma=0.540057 ! Fit after self-cal, rms=0.577463Jy sigma=0.539539 wmodel J0805+6144_S_map.mod ! Writing 133 model components to file: J0805+6144_S_map.mod wobs J0805+6144_S_uvs.fits ! Writing UV FITS file: J0805+6144_S_uvs.fits wwins J0805+6144_S_map.win ! wwins: Wrote 8 windows to J0805+6144_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000421227 Jy ! Component: 100 - total flux cleaned = -0.000356734 Jy ! Component: 150 - total flux cleaned = -0.000357603 Jy ! Component: 200 - total flux cleaned = -0.000234654 Jy ! Component: 250 - total flux cleaned = 6.68e-05 Jy ! Component: 300 - total flux cleaned = 0.000242894 Jy ! Component: 350 - total flux cleaned = 0.000415982 Jy ! Component: 400 - total flux cleaned = 0.000529264 Jy ! Component: 450 - total flux cleaned = 0.000809768 Jy ! Component: 500 - total flux cleaned = 0.00086468 Jy ! Component: 550 - total flux cleaned = 0.00102966 Jy ! Component: 600 - total flux cleaned = 0.00113853 Jy ! Component: 650 - total flux cleaned = 0.0015141 Jy ! Component: 700 - total flux cleaned = 0.00156693 Jy ! Component: 750 - total flux cleaned = 0.00172433 Jy ! Component: 800 - total flux cleaned = 0.00188079 Jy ! Component: 850 - total flux cleaned = 0.00203536 Jy ! Component: 900 - total flux cleaned = 0.00213735 Jy ! Component: 950 - total flux cleaned = 0.0022384 Jy ! Component: 1000 - total flux cleaned = 0.00238899 Jy ! Component: 1050 - total flux cleaned = 0.00253767 Jy ! Component: 1100 - total flux cleaned = 0.00263613 Jy ! Component: 1150 - total flux cleaned = 0.00263633 Jy ! Component: 1200 - total flux cleaned = 0.00278234 Jy ! Component: 1250 - total flux cleaned = 0.00292738 Jy ! Component: 1300 - total flux cleaned = 0.00302327 Jy ! Component: 1350 - total flux cleaned = 0.00316579 Jy ! Component: 1400 - total flux cleaned = 0.00326021 Jy ! Component: 1450 - total flux cleaned = 0.00340124 Jy ! Component: 1500 - total flux cleaned = 0.00349456 Jy ! Component: 1550 - total flux cleaned = 0.00367965 Jy ! Component: 1600 - total flux cleaned = 0.00358758 Jy ! Component: 1650 - total flux cleaned = 0.00381632 Jy ! Component: 1700 - total flux cleaned = 0.00381637 Jy ! Component: 1750 - total flux cleaned = 0.0039517 Jy ! Component: 1800 - total flux cleaned = 0.0039517 Jy ! Component: 1850 - total flux cleaned = 0.00395176 Jy ! Component: 1900 - total flux cleaned = 0.00399598 Jy ! Component: 1950 - total flux cleaned = 0.00399603 Jy ! Component: 2000 - total flux cleaned = 0.00403999 Jy ! Component: 2050 - total flux cleaned = 0.00408347 Jy ! Component: 2100 - total flux cleaned = 0.00403991 Jy ! Component: 2150 - total flux cleaned = 0.00399666 Jy ! Component: 2200 - total flux cleaned = 0.00399654 Jy ! Component: 2250 - total flux cleaned = 0.00395401 Jy ! Component: 2300 - total flux cleaned = 0.00391183 Jy ! Component: 2350 - total flux cleaned = 0.00391181 Jy ! Component: 2400 - total flux cleaned = 0.00391182 Jy ! Component: 2450 - total flux cleaned = 0.0038699 Jy ! Component: 2500 - total flux cleaned = 0.00391161 Jy ! Component: 2550 - total flux cleaned = 0.00387028 Jy ! Component: 2600 - total flux cleaned = 0.00387038 Jy ! Component: 2650 - total flux cleaned = 0.00395247 Jy ! Component: 2700 - total flux cleaned = 0.00387082 Jy ! Component: 2750 - total flux cleaned = 0.00395238 Jy ! Component: 2800 - total flux cleaned = 0.00399313 Jy ! Component: 2850 - total flux cleaned = 0.00395276 Jy ! Component: 2900 - total flux cleaned = 0.00399294 Jy ! Component: 2950 - total flux cleaned = 0.00391272 Jy ! Component: 3000 - total flux cleaned = 0.0039925 Jy ! Component: 3050 - total flux cleaned = 0.00399253 Jy ! Component: 3100 - total flux cleaned = 0.00403213 Jy ! Component: 3150 - total flux cleaned = 0.00395321 Jy ! Component: 3200 - total flux cleaned = 0.0039533 Jy ! Component: 3250 - total flux cleaned = 0.00403153 Jy ! Component: 3300 - total flux cleaned = 0.00403143 Jy ! Component: 3350 - total flux cleaned = 0.00403132 Jy ! Component: 3400 - total flux cleaned = 0.00395389 Jy ! Component: 3450 - total flux cleaned = 0.00395394 Jy ! Component: 3500 - total flux cleaned = 0.00399219 Jy ! Component: 3550 - total flux cleaned = 0.00399212 Jy ! Component: 3600 - total flux cleaned = 0.00395405 Jy ! Component: 3650 - total flux cleaned = 0.00395412 Jy ! Component: 3700 - total flux cleaned = 0.00395432 Jy ! Component: 3750 - total flux cleaned = 0.00402982 Jy ! Component: 3800 - total flux cleaned = 0.00395482 Jy ! Component: 3850 - total flux cleaned = 0.0039923 Jy ! Component: 3900 - total flux cleaned = 0.00402953 Jy ! Component: 3950 - total flux cleaned = 0.00395527 Jy ! Component: 4000 - total flux cleaned = 0.00395552 Jy ! Component: 4050 - total flux cleaned = 0.0039555 Jy ! Total flux subtracted in 4096 components = 0.00391876 Jy ! Clean residual min=-0.002193 max=0.002132 Jy/beam ! Clean residual mean=0.000011 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.11249 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 447 components and 1.11249 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0805+6144_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.457 x 3.647 at 75.3 degrees (North through East) ! Clean map min=-0.0029964 max=0.74573 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0805+6144_S_map.fits wmodel /scr/pima/rv102_uvs/J0805+6144_S_map.mod ! Writing 447 model components to file: /scr/pima/rv102_uvs/J0805+6144_S_map.mod wobs /scr/pima/rv102_uvs/J0805+6144_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0805+6144_S_uvs.fits wwins /scr/pima/rv102_uvs/J0805+6144_S_map.win ! wwins: Wrote 9 windows to /scr/pima/rv102_uvs/J0805+6144_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.745727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00062988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.253396 0.253396 0.506791 1.01358 2.02717 4.05433 8.10866 16.2173 32.4347 64.8693 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.745 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1183.92 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0805+6144_S_dfm.log closed on Sat Nov 9 09:32:38 2019