! Started logfile: /scr/pima/rv102_uvs/J0726+7911_X_uvs.log on Sat Feb 27 22:24:36 2016 obs /scr/pima/rv102_uvs/J0726+7911_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0726+7911_X_uva.fits ! AN table 1: 252 integrations on 6 of 6 possible baselines. ! AN table 2: 9 integrations on 1 of 1 possible baselines. ! AN table 3: 15 integrations on 15 of 15 possible baselines. ! AN table 4: 12 integrations on 3 of 3 possible baselines. ! AN table 5: 33 integrations on 1 of 1 possible baselines. ! AN table 6: 18 integrations on 6 of 6 possible baselines. ! AN table 7: 29 integrations on 55 of 55 possible baselines. ! AN table 8: 9 integrations on 36 of 36 possible baselines. ! AN table 9: 18 integrations on 1 of 1 possible baselines. ! AN table 10: 14 integrations on 28 of 28 possible baselines. ! AN table 11: 18 integrations on 6 of 6 possible baselines. ! AN table 12: 60 integrations on 10 of 10 possible baselines. ! AN table 13: 19 integrations on 3 of 3 possible baselines. ! AN table 14: 21 integrations on 21 of 21 possible baselines. ! AN table 15: 21 integrations on 15 of 15 possible baselines. ! AN table 16: 68 integrations on 15 of 15 possible baselines. ! AN table 17: 23 integrations on 10 of 10 possible baselines. ! AN table 18: 11 integrations on 1 of 1 possible baselines. ! AN table 19: 59 integrations on 10 of 10 possible baselines. ! AN table 20: 15 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.498756 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0726+7911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 15240 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0726+7911_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 840 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 44 telescope corrections were flagged in sub-array 6. ! A total of 186 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 56 telescope corrections were flagged in sub-array 10. ! A total of 39 telescope corrections were flagged in sub-array 11. ! A total of 220 telescope corrections were flagged in sub-array 12. ! A total of 57 telescope corrections were flagged in sub-array 13. ! A total of 75 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! A total of 276 telescope corrections were flagged in sub-array 16. ! A total of 61 telescope corrections were flagged in sub-array 17. ! A total of 22 telescope corrections were flagged in sub-array 18. ! A total of 233 telescope corrections were flagged in sub-array 19. ! A total of 30 telescope corrections were flagged in sub-array 20. ! ! Correcting IF 2. ! A total of 840 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 44 telescope corrections were flagged in sub-array 6. ! A total of 186 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 56 telescope corrections were flagged in sub-array 10. ! A total of 39 telescope corrections were flagged in sub-array 11. ! A total of 220 telescope corrections were flagged in sub-array 12. ! A total of 57 telescope corrections were flagged in sub-array 13. ! A total of 75 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! A total of 276 telescope corrections were flagged in sub-array 16. ! A total of 61 telescope corrections were flagged in sub-array 17. ! A total of 22 telescope corrections were flagged in sub-array 18. ! A total of 233 telescope corrections were flagged in sub-array 19. ! A total of 30 telescope corrections were flagged in sub-array 20. ! ! Correcting IF 3. ! A total of 1008 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 225 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 63 telescope corrections were flagged in sub-array 10. ! A total of 54 telescope corrections were flagged in sub-array 11. ! A total of 252 telescope corrections were flagged in sub-array 12. ! A total of 57 telescope corrections were flagged in sub-array 13. ! A total of 103 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! A total of 290 telescope corrections were flagged in sub-array 16. ! A total of 97 telescope corrections were flagged in sub-array 17. ! A total of 22 telescope corrections were flagged in sub-array 18. ! A total of 295 telescope corrections were flagged in sub-array 19. ! A total of 30 telescope corrections were flagged in sub-array 20. ! ! Correcting IF 4. ! A total of 1008 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 225 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 63 telescope corrections were flagged in sub-array 10. ! A total of 54 telescope corrections were flagged in sub-array 11. ! A total of 252 telescope corrections were flagged in sub-array 12. ! A total of 57 telescope corrections were flagged in sub-array 13. ! A total of 103 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! A total of 290 telescope corrections were flagged in sub-array 16. ! A total of 97 telescope corrections were flagged in sub-array 17. ! A total of 22 telescope corrections were flagged in sub-array 18. ! A total of 295 telescope corrections were flagged in sub-array 19. ! A total of 30 telescope corrections were flagged in sub-array 20. ! ! Fit before self-cal, rms=1.134181Jy sigma=9.516670 ! Fit after self-cal, rms=0.659093Jy sigma=6.034280 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.47% of the data. ! The y-axis pixel size should ideally be below 0.1693 milli-arcsec ! Estimated beam: bmin=0.6001 mas, bmaj=1.064 mas, bpa=-71.99 degrees ! Estimated noise=1.72097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.282213 Jy ! Component: 100 - total flux cleaned = 0.351012 Jy ! Total flux subtracted in 100 components = 0.351012 Jy ! Clean residual min=-0.037499 max=0.053136 Jy/beam ! Clean residual mean=0.000031 rms=0.009436 Jy/beam ! Combined flux in latest and established models = 0.351012 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.351012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290400Jy sigma=2.189453 ! Fit after self-cal, rms=0.290140Jy sigma=2.186385 ! Inverting map ! Your choice of large map pixels excluded 2.47% of the data. ! The y-axis pixel size should ideally be below 0.1693 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.47% of the data. ! The y-axis pixel size should ideally be below 0.1693 milli-arcsec ! Estimated beam: bmin=0.6898 mas, bmaj=1.117 mas, bpa=-71.42 degrees ! Estimated noise=1.25274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383318 Jy ! Component: 100 - total flux cleaned = 0.0542291 Jy ! Component: 150 - total flux cleaned = 0.0618191 Jy ! Component: 200 - total flux cleaned = 0.0626999 Jy ! Total flux subtracted in 200 components = 0.0626999 Jy ! Clean residual min=-0.042300 max=0.057992 Jy/beam ! Clean residual mean=-0.000393 rms=0.011353 Jy/beam ! Combined flux in latest and established models = 0.413712 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.413712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281057Jy sigma=2.191327 ! Fit after self-cal, rms=0.281043Jy sigma=2.190884 ! Inverting map ! Your choice of large map pixels excluded 2.47% of the data. ! The y-axis pixel size should ideally be below 0.1693 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6898 x 1.117 at -71.42 degrees (North through East) ! Clean map min=-0.039859 max=0.37495 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* WZ 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NY 1.00* SC 1.00* WF 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* OV 1.00* WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 19. ! Telescope amplitude corrections in sub-array 19: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* WZ 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NY 1.00* SC 1.00* WF 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* OV 1.00* WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 19. ! Telescope amplitude corrections in sub-array 19: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* OV 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* OV 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=0.281043Jy sigma=2.190884 ! Fit after self-cal, rms=0.276114Jy sigma=2.234307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6975 mas, bmaj=1.098 mas, bpa=-72.96 degrees ! Estimated noise=1.38721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0165155 Jy ! Component: 100 - total flux cleaned = -0.0236773 Jy ! Component: 150 - total flux cleaned = -0.0261633 Jy ! Component: 200 - total flux cleaned = -0.026648 Jy ! Total flux subtracted in 200 components = -0.026648 Jy ! Clean residual min=-0.046283 max=0.063679 Jy/beam ! Clean residual mean=-0.000311 rms=0.012173 Jy/beam ! Combined flux in latest and established models = 0.387064 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.387064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277183Jy sigma=2.205712 ! Fit after self-cal, rms=0.277146Jy sigma=2.205484 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Added new window around map position (4.6, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596789 Jy ! Component: 100 - total flux cleaned = 0.089498 Jy ! Component: 150 - total flux cleaned = 0.0997464 Jy ! Component: 200 - total flux cleaned = 0.101663 Jy ! Total flux subtracted in 200 components = 0.101663 Jy ! Clean residual min=-0.044473 max=0.060254 Jy/beam ! Clean residual mean=-0.000959 rms=0.011043 Jy/beam ! Combined flux in latest and established models = 0.488727 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.488727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268636Jy sigma=2.060644 ! Fit after self-cal, rms=0.265216Jy sigma=2.033776 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265216Jy sigma=2.033776 ! Fit after self-cal, rms=0.264710Jy sigma=2.032964 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6978 mas, bmaj=1.098 mas, bpa=-72.98 degrees ! Estimated noise=1.38515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268369 Jy ! Component: 100 - total flux cleaned = 0.0302971 Jy ! Component: 150 - total flux cleaned = 0.029214 Jy ! Component: 200 - total flux cleaned = 0.0287409 Jy ! Total flux subtracted in 200 components = 0.0287409 Jy ! Clean residual min=-0.043666 max=0.044775 Jy/beam ! Clean residual mean=-0.001114 rms=0.010484 Jy/beam ! Combined flux in latest and established models = 0.517468 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.517468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262984Jy sigma=1.990829 ! Fit after self-cal, rms=0.262330Jy sigma=1.985224 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104319 Jy ! Component: 100 - total flux cleaned = 0.00951032 Jy ! Component: 150 - total flux cleaned = 0.00825626 Jy ! Component: 200 - total flux cleaned = 0.00675648 Jy ! Total flux subtracted in 200 components = 0.00675648 Jy ! Clean residual min=-0.044070 max=0.043165 Jy/beam ! Clean residual mean=-0.001151 rms=0.010271 Jy/beam ! Combined flux in latest and established models = 0.524224 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.524224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261611Jy sigma=1.964551 ! Fit after self-cal, rms=0.261425Jy sigma=1.962699 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261425Jy sigma=1.962699 ! Fit after self-cal, rms=0.261526Jy sigma=1.962537 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6977 mas, bmaj=1.098 mas, bpa=-72.96 degrees ! Estimated noise=1.38603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566435 Jy ! Component: 100 - total flux cleaned = 0.00416719 Jy ! Component: 150 - total flux cleaned = 0.00349569 Jy ! Component: 200 - total flux cleaned = 0.00288084 Jy ! Total flux subtracted in 200 components = 0.00288084 Jy ! Clean residual min=-0.044522 max=0.042137 Jy/beam ! Clean residual mean=-0.001168 rms=0.010178 Jy/beam ! Combined flux in latest and established models = 0.527105 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.527105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261057Jy sigma=1.951000 ! Fit after self-cal, rms=0.260937Jy sigma=1.950055 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211445 Jy ! Component: 100 - total flux cleaned = 0.00211975 Jy ! Component: 150 - total flux cleaned = 0.00155698 Jy ! Component: 200 - total flux cleaned = 0.0012928 Jy ! Total flux subtracted in 200 components = 0.0012928 Jy ! Clean residual min=-0.044858 max=0.041330 Jy/beam ! Clean residual mean=-0.001175 rms=0.010110 Jy/beam ! Combined flux in latest and established models = 0.528398 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.528398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260644Jy sigma=1.942603 ! Fit after self-cal, rms=0.260627Jy sigma=1.942102 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260627Jy sigma=1.942102 ! Fit after self-cal, rms=0.260657Jy sigma=1.942091 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=2.582 mas, bmaj=2.961 mas, bpa=71.3 degrees ! Estimated noise=2.0155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289295 Jy ! Component: 100 - total flux cleaned = -0.00409146 Jy ! Component: 150 - total flux cleaned = -0.00484548 Jy ! Component: 200 - total flux cleaned = -0.0058856 Jy ! Total flux subtracted in 200 components = -0.0058856 Jy ! Clean residual min=-0.077966 max=0.082047 Jy/beam ! Clean residual mean=-0.003199 rms=0.022097 Jy/beam ! Combined flux in latest and established models = 0.522512 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.522512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261553Jy sigma=1.940688 ! Fit after self-cal, rms=0.261356Jy sigma=1.938862 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360524 Jy ! Component: 100 - total flux cleaned = -0.00100982 Jy ! Component: 150 - total flux cleaned = -0.00161514 Jy ! Component: 200 - total flux cleaned = -0.00218472 Jy ! Total flux subtracted in 200 components = -0.00218472 Jy ! Clean residual min=-0.077866 max=0.081336 Jy/beam ! Clean residual mean=-0.003167 rms=0.022058 Jy/beam ! Combined flux in latest and established models = 0.520328 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.520328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262103Jy sigma=1.944966 ! Fit after self-cal, rms=0.262032Jy sigma=1.943874 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6976 mas, bmaj=1.098 mas, bpa=-72.96 degrees ! Estimated noise=1.38625 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6976 x 1.098 at -72.96 degrees (North through East) ! Clean map min=-0.043468 max=0.3409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6014 mas, bmaj=1.046 mas, bpa=-73.78 degrees ! Estimated noise=1.87392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269942 Jy ! Component: 100 - total flux cleaned = 0.364286 Jy ! Component: 150 - total flux cleaned = 0.425259 Jy ! Component: 200 - total flux cleaned = 0.468214 Jy ! Total flux subtracted in 200 components = 0.468214 Jy ! Clean residual min=-0.039243 max=0.048288 Jy/beam ! Clean residual mean=-0.000128 rms=0.008879 Jy/beam ! Combined flux in latest and established models = 0.468214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.468214 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6976 mas, bmaj=1.098 mas, bpa=-72.96 degrees ! Estimated noise=1.38625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429057 Jy ! Component: 100 - total flux cleaned = 0.0646432 Jy ! Component: 150 - total flux cleaned = 0.072667 Jy ! Component: 200 - total flux cleaned = 0.0794251 Jy ! Total flux subtracted in 200 components = 0.0794251 Jy ! Clean residual min=-0.041027 max=0.045573 Jy/beam ! Clean residual mean=-0.001250 rms=0.010113 Jy/beam ! Combined flux in latest and established models = 0.547639 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.547639 Jy ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Added new window around map position (40.2, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411694 Jy ! Component: 100 - total flux cleaned = 0.054342 Jy ! Component: 150 - total flux cleaned = 0.0562446 Jy ! Component: 200 - total flux cleaned = 0.056787 Jy ! Total flux subtracted in 200 components = 0.056787 Jy ! Clean residual min=-0.042077 max=0.041269 Jy/beam ! Clean residual mean=-0.001319 rms=0.009284 Jy/beam ! Combined flux in latest and established models = 0.604426 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.604426 Jy ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=2.582 mas, bmaj=2.961 mas, bpa=71.3 degrees ! Estimated noise=2.0155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201285 Jy ! Component: 100 - total flux cleaned = 0.0207715 Jy ! Component: 150 - total flux cleaned = 0.0213238 Jy ! Component: 200 - total flux cleaned = 0.0222489 Jy ! Total flux subtracted in 200 components = 0.0222489 Jy ! Clean residual min=-0.080431 max=0.073778 Jy/beam ! Clean residual mean=-0.003796 rms=0.019627 Jy/beam ! Combined flux in latest and established models = 0.626675 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40987e-05 Jy ! Component: 100 - total flux cleaned = -2.58984e-05 Jy ! Component: 150 - total flux cleaned = -0.000388545 Jy ! Component: 200 - total flux cleaned = -0.000734726 Jy ! Total flux subtracted in 200 components = -0.000734726 Jy ! Clean residual min=-0.079770 max=0.073110 Jy/beam ! Clean residual mean=-0.003733 rms=0.019451 Jy/beam ! Combined flux in latest and established models = 0.62594 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.62594 Jy ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! Estimated beam: bmin=0.6976 mas, bmaj=1.098 mas, bpa=-72.96 degrees ! Estimated noise=1.38625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0036609 Jy ! Component: 100 - total flux cleaned = -0.0042117 Jy ! Component: 150 - total flux cleaned = -0.00331652 Jy ! Component: 200 - total flux cleaned = -0.00163256 Jy ! Total flux subtracted in 200 components = -0.00163256 Jy ! Clean residual min=-0.041420 max=0.039024 Jy/beam ! Clean residual mean=-0.001318 rms=0.009010 Jy/beam ! Combined flux in latest and established models = 0.624308 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.624308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254553Jy sigma=1.827124 ! Fit after self-cal, rms=0.251638Jy sigma=1.801270 wmodel /scr/pima/rv102_uvs/J0726+7911_X_map.mod ! Writing 88 model components to file: /scr/pima/rv102_uvs/J0726+7911_X_map.mod wobs /scr/pima/rv102_uvs/J0726+7911_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0726+7911_X_uvs.fits wwins /scr/pima/rv102_uvs/J0726+7911_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J0726+7911_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00813673 Jy ! Component: 100 - total flux cleaned = -0.0120203 Jy ! Component: 150 - total flux cleaned = -0.0137887 Jy ! Component: 200 - total flux cleaned = -0.0137806 Jy ! Component: 250 - total flux cleaned = -0.0137824 Jy ! Component: 300 - total flux cleaned = -0.014833 Jy ! Component: 350 - total flux cleaned = -0.0158447 Jy ! Component: 400 - total flux cleaned = -0.0172981 Jy ! Component: 450 - total flux cleaned = -0.0182239 Jy ! Component: 500 - total flux cleaned = -0.0191348 Jy ! Component: 550 - total flux cleaned = -0.018685 Jy ! Component: 600 - total flux cleaned = -0.0208602 Jy ! Component: 650 - total flux cleaned = -0.0204216 Jy ! Component: 700 - total flux cleaned = -0.020832 Jy ! Component: 750 - total flux cleaned = -0.0220479 Jy ! Component: 800 - total flux cleaned = -0.0228366 Jy ! Component: 850 - total flux cleaned = -0.0236136 Jy ! Component: 900 - total flux cleaned = -0.0239962 Jy ! Component: 950 - total flux cleaned = -0.025505 Jy ! Component: 1000 - total flux cleaned = -0.0277185 Jy ! Component: 1050 - total flux cleaned = -0.0288072 Jy ! Component: 1100 - total flux cleaned = -0.0302343 Jy ! Component: 1150 - total flux cleaned = -0.0312887 Jy ! Component: 1200 - total flux cleaned = -0.032677 Jy ! Component: 1250 - total flux cleaned = -0.0343796 Jy ! Component: 1300 - total flux cleaned = -0.0357228 Jy ! Component: 1350 - total flux cleaned = -0.0377085 Jy ! Component: 1400 - total flux cleaned = -0.0393335 Jy ! Component: 1450 - total flux cleaned = -0.0409376 Jy ! Component: 1500 - total flux cleaned = -0.0437826 Jy ! Component: 1550 - total flux cleaned = -0.0453381 Jy ! Component: 1600 - total flux cleaned = -0.046879 Jy ! Component: 1650 - total flux cleaned = -0.0490048 Jy ! Component: 1700 - total flux cleaned = -0.0507998 Jy ! Component: 1750 - total flux cleaned = -0.0522785 Jy ! Component: 1800 - total flux cleaned = -0.0543212 Jy ! Component: 1850 - total flux cleaned = -0.0560506 Jy ! Component: 1900 - total flux cleaned = -0.0583285 Jy ! Component: 1950 - total flux cleaned = -0.0591714 Jy ! Component: 2000 - total flux cleaned = -0.0608383 Jy ! Component: 2050 - total flux cleaned = -0.062208 Jy ! Component: 2100 - total flux cleaned = -0.064109 Jy ! Component: 2150 - total flux cleaned = -0.0659833 Jy ! Component: 2200 - total flux cleaned = -0.0673045 Jy ! Component: 2250 - total flux cleaned = -0.0683526 Jy ! Component: 2300 - total flux cleaned = -0.0693888 Jy ! Component: 2350 - total flux cleaned = -0.0704111 Jy ! Component: 2400 - total flux cleaned = -0.0719285 Jy ! Component: 2450 - total flux cleaned = -0.0729319 Jy ! Component: 2500 - total flux cleaned = -0.0749132 Jy ! Component: 2550 - total flux cleaned = -0.0758935 Jy ! Component: 2600 - total flux cleaned = -0.077345 Jy ! Component: 2650 - total flux cleaned = -0.0785432 Jy ! Component: 2700 - total flux cleaned = -0.0794908 Jy ! Component: 2750 - total flux cleaned = -0.0808963 Jy ! Component: 2800 - total flux cleaned = -0.0818234 Jy ! Component: 2850 - total flux cleaned = -0.0834324 Jy ! Component: 2900 - total flux cleaned = -0.084794 Jy ! Component: 2950 - total flux cleaned = -0.0854657 Jy ! Component: 3000 - total flux cleaned = -0.087025 Jy ! Component: 3050 - total flux cleaned = -0.0881304 Jy ! Component: 3100 - total flux cleaned = -0.0890046 Jy ! Component: 3150 - total flux cleaned = -0.0902983 Jy ! Component: 3200 - total flux cleaned = -0.0909417 Jy ! Component: 3250 - total flux cleaned = -0.0922167 Jy ! Component: 3300 - total flux cleaned = -0.0932654 Jy ! Component: 3350 - total flux cleaned = -0.09389 Jy ! Component: 3400 - total flux cleaned = -0.0951307 Jy ! Component: 3450 - total flux cleaned = -0.0963578 Jy ! Component: 3500 - total flux cleaned = -0.0971695 Jy ! Component: 3550 - total flux cleaned = -0.0975691 Jy ! Component: 3600 - total flux cleaned = -0.0985629 Jy ! Component: 3650 - total flux cleaned = -0.0997447 Jy ! Component: 3700 - total flux cleaned = -0.0995493 Jy ! Component: 3750 - total flux cleaned = -0.101102 Jy ! Component: 3800 - total flux cleaned = -0.102061 Jy ! Component: 3850 - total flux cleaned = -0.102251 Jy ! Component: 3900 - total flux cleaned = -0.103006 Jy ! Component: 3950 - total flux cleaned = -0.10357 Jy ! Component: 4000 - total flux cleaned = -0.104498 Jy ! Component: 4050 - total flux cleaned = -0.104497 Jy ! Total flux subtracted in 4096 components = -0.105414 Jy ! Clean residual min=-0.009122 max=0.010937 Jy/beam ! Clean residual mean=-0.000572 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.518894 Jy keep ! Adding 411 model components to the UV plane model. ! The established model now contains 499 components and 0.518893 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0726+7911_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6976 x 1.098 at -72.96 degrees (North through East) ! Clean map min=-0.023383 max=0.3265 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0726+7911_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.326498 invert ! Inverting map ! Your choice of large map pixels excluded 1.69% of the data. ! The y-axis pixel size should ideally be below 0.1777 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0033215 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.05193 3.05193 6.10386 12.2077 24.4154 48.8309 97.6618 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0099 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.326 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 98.298 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0726+7911_X_uvs.log closed on Sat Feb 27 22:24:40 2016