! Started logfile: /scr/pima/rv102_uvs/J0726+7911_S_dfm.log on Sat Nov 9 09:32:23 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J0726+7911_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0726+7911_S_uva.fits ! AN table 1: 58 integrations on 6 of 6 possible baselines. ! AN table 2: 2 integrations on 3 of 3 possible baselines. ! AN table 3: 4 integrations on 10 of 10 possible baselines. ! AN table 4: 11 integrations on 1 of 1 possible baselines. ! AN table 5: 4 integrations on 10 of 10 possible baselines. ! AN table 6: 7 integrations on 45 of 45 possible baselines. ! AN table 7: 2 integrations on 28 of 28 possible baselines. ! AN table 8: 8 integrations on 1 of 1 possible baselines. ! AN table 9: 4 integrations on 21 of 21 possible baselines. ! AN table 10: 4 integrations on 6 of 6 possible baselines. ! AN table 11: 15 integrations on 10 of 10 possible baselines. ! AN table 12: 4 integrations on 3 of 3 possible baselines. ! AN table 13: 5 integrations on 21 of 21 possible baselines. ! AN table 14: 5 integrations on 15 of 15 possible baselines. ! AN table 15: 17 integrations on 15 of 15 possible baselines. ! AN table 16: 5 integrations on 10 of 10 possible baselines. ! AN table 17: 2 integrations on 1 of 1 possible baselines. ! AN table 18: 14 integrations on 10 of 10 possible baselines. ! AN table 19: 3 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.697216 visibilities/baseline/integration-bin. ! Found source: J0726+7911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4808 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0726+7911_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 29 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 8. ! A total of 7 telescope corrections were flagged in sub-array 9. ! A total of 5 telescope corrections were flagged in sub-array 10. ! A total of 28 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 10 telescope corrections were flagged in sub-array 13. ! A total of 9 telescope corrections were flagged in sub-array 14. ! A total of 42 telescope corrections were flagged in sub-array 15. ! A total of 2 telescope corrections were flagged in sub-array 16. ! A total of 4 telescope corrections were flagged in sub-array 17. ! A total of 39 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 2. ! A total of 154 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 29 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 8. ! A total of 7 telescope corrections were flagged in sub-array 9. ! A total of 5 telescope corrections were flagged in sub-array 10. ! A total of 45 telescope corrections were flagged in sub-array 11. ! A total of 12 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! A total of 15 telescope corrections were flagged in sub-array 14. ! A total of 68 telescope corrections were flagged in sub-array 15. ! A total of 11 telescope corrections were flagged in sub-array 16. ! A total of 4 telescope corrections were flagged in sub-array 17. ! A total of 54 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 29 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 8. ! A total of 7 telescope corrections were flagged in sub-array 9. ! A total of 5 telescope corrections were flagged in sub-array 10. ! A total of 28 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 10 telescope corrections were flagged in sub-array 13. ! A total of 9 telescope corrections were flagged in sub-array 14. ! A total of 42 telescope corrections were flagged in sub-array 15. ! A total of 2 telescope corrections were flagged in sub-array 16. ! A total of 4 telescope corrections were flagged in sub-array 17. ! A total of 39 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 29 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 8. ! A total of 7 telescope corrections were flagged in sub-array 9. ! A total of 5 telescope corrections were flagged in sub-array 10. ! A total of 45 telescope corrections were flagged in sub-array 11. ! A total of 12 telescope corrections were flagged in sub-array 12. ! A total of 14 telescope corrections were flagged in sub-array 13. ! A total of 15 telescope corrections were flagged in sub-array 14. ! A total of 68 telescope corrections were flagged in sub-array 15. ! A total of 11 telescope corrections were flagged in sub-array 16. ! A total of 4 telescope corrections were flagged in sub-array 17. ! A total of 54 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 19. ! ! Fit before self-cal, rms=1.347034Jy sigma=7.909366 ! Fit after self-cal, rms=0.392385Jy sigma=1.947967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.253 mas, bmaj=3.743 mas, bpa=-78.3 degrees ! Estimated noise=2.98644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.593235 Jy ! Component: 100 - total flux cleaned = 0.725728 Jy ! Total flux subtracted in 100 components = 0.725728 Jy ! Clean residual min=-0.024578 max=0.045964 Jy/beam ! Clean residual mean=-0.000014 rms=0.005108 Jy/beam ! Combined flux in latest and established models = 0.725728 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.725728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383768Jy sigma=1.085625 ! Fit after self-cal, rms=0.383714Jy sigma=1.085570 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049692 Jy ! Component: 100 - total flux cleaned = 0.0789235 Jy ! Total flux subtracted in 100 components = 0.0789235 Jy ! Clean residual min=-0.021964 max=0.020833 Jy/beam ! Clean residual mean=0.000014 rms=0.004718 Jy/beam ! Combined flux in latest and established models = 0.804652 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.804652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365379Jy sigma=1.027008 ! Fit after self-cal, rms=0.365178Jy sigma=1.026764 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=4.021 mas, bpa=-81.93 degrees ! Estimated noise=2.32676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172426 Jy ! Component: 100 - total flux cleaned = 0.0262184 Jy ! Component: 150 - total flux cleaned = 0.0310655 Jy ! Component: 200 - total flux cleaned = 0.0336634 Jy ! Total flux subtracted in 200 components = 0.0336634 Jy ! Clean residual min=-0.018685 max=0.016657 Jy/beam ! Clean residual mean=-0.000601 rms=0.003816 Jy/beam ! Combined flux in latest and established models = 0.838315 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.838315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360143Jy sigma=1.030379 ! Fit after self-cal, rms=0.360035Jy sigma=1.030337 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.66 x 4.021 at -81.93 degrees (North through East) ! Clean map min=-0.017448 max=0.76216 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.67 NY 1.02 ON 0.99 WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 0.99 LA 1.08 PT 1.01 ! WZ 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.05 NL 1.01 NY 0.91 SC 1.10 ! WF 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 HN 1.02 KP 1.01 LA 1.04 ! MK 0.83 NL 0.98 NY 1.02 PT 1.04 ! SC 1.08 WF 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 1.01 KP 1.01 LA 1.03 ! MK 0.88 PT 1.02 SC 1.08 WF 1.07 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.07 HN 1.02 KP 0.99 LA 1.02 ! NL 1.03 NY 1.06 WF 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.15 NY 1.02 ON 0.98 WZ 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.63 NY 0.98 ON 1.03 WF 1.10 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.90 MA 0.90 NY 1.18 ON 0.99 ! SC 1.03 WF 1.04 WZ 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 0.99 MA 0.58 ON 1.08 SC 1.08 ! WF 1.06 WZ 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.69 MK 0.86 NY 1.03 ON 1.01 ! WF 1.05 WZ 1.11 ! ! Telescope amplitude corrections in sub-array 16: ! MA 0.79 MK 0.95 NY 0.90 ON 1.10 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! HN 0.97 MA 0.68 NY 1.06 ON 1.02 ! WZ 0.96 ! ! Telescope amplitude corrections in sub-array 19: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.13 KP 0.95 LA 1.04 PT 1.11 ! WZ 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.96 NL 1.04 NY 0.95 SC 1.16 ! WF 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.02 HN 1.02 KP 1.03 LA 1.02 ! MK 1.06 NL 1.03 NY 1.01 PT 1.03 ! SC 1.05 WF 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.96 HN 0.97 KP 1.04 LA 1.00 ! MK 1.06 PT 1.05 SC 1.07 WF 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.05 HN 1.01 KP 1.01 LA 1.02 ! NL 1.10 NY 1.05 WF 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.08 NY 1.16 ON 1.06 WZ 0.84 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00 ON 0.96 WF 1.01 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.98 MA 1.00* NY 1.12 ON 1.08 ! SC 0.98 WF 1.01 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.07 MA 1.00* ON 1.04 SC 1.00 ! WF 0.92 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 1.00* MK 0.97 NY 0.99 ON 0.97 ! WF 0.99 WZ 1.08 ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 1.16 NY 0.85 ON 1.12 ! WZ 1.08 ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.00 MA 1.00* NY 0.97 ON 1.03 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 19: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.47 NY 1.03 ON 1.03 WZ 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 KP 1.01 LA 1.04 PT 1.06 ! WZ 1.09 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.01 NL 1.04 NY 1.08 SC 1.14 ! WF 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 HN 0.99 KP 1.04 LA 1.01 ! MK 0.97 NL 1.01 NY 1.03 PT 1.05 ! SC 1.04 WF 0.97 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.96 HN 1.00 KP 1.02 LA 1.01 ! MK 1.09 PT 1.01 SC 1.08 WF 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.06 HN 1.04 KP 1.03 LA 1.04 ! NL 1.08 NY 1.04 WF 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.04 NY 1.25 ON 0.88 WZ 0.99 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.45 NY 0.99 ON 0.98 WF 1.11 ! WZ 1.10 ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 1.03 MA 0.45 NY 1.24 ON 0.99 ! SC 1.06 WF 1.04 WZ 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.01 MA 0.48 ON 1.09 SC 1.00 ! WF 0.99 WZ 1.09 ! ! A total of 12 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.49 MK 0.98 NY 1.01 ON 1.06 ! WF 1.10 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 16: ! MA 0.50 MK 1.22 NY 1.02 ON 1.02 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! HN 0.99 MA 0.49 NY 1.06 ON 1.04 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 19: ! NY 0.00* WF 0.00* ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.10 KP 0.97 LA 0.98 PT 1.06 ! WZ 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.03 NL 1.07 NY 1.05 SC 0.99 ! WF 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 HN 1.00 KP 1.01 LA 1.01 ! MK 0.68 NL 1.02 NY 1.11 PT 1.01 ! SC 1.07 WF 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.06 KP 1.02 LA 1.04 ! MK 0.65 PT 0.99 SC 1.10 WF 1.06 ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.06 HN 1.05 KP 1.01 LA 1.05 ! NL 1.06 NY 1.01 WF 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.04 NY 1.11 ON 0.92 WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.02 ON 1.14 WF 1.05 ! WZ 1.06 ! ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00 MA 1.00* NY 1.15 ON 1.17 ! SC 1.07 WF 1.03 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.07 MA 1.00* ON 1.17 SC 1.02 ! WF 1.11 WZ 1.18 ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 1.00* MK 1.52 NY 1.05 ON 0.96 ! WF 0.98 WZ 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* MK 0.78 NY 0.85 ON 0.89 ! WZ 1.21 ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.01 MA 1.00* NY 1.02 ON 0.90 ! WZ 1.03 ! ! Telescope amplitude corrections in sub-array 19: ! NY 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=0.360035Jy sigma=1.030337 ! Fit after self-cal, rms=0.183590Jy sigma=0.729916 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=4.061 mas, bpa=-81.14 degrees ! Estimated noise=2.42101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408802 Jy ! Component: 100 - total flux cleaned = 0.00542082 Jy ! Component: 150 - total flux cleaned = 0.00574839 Jy ! Component: 200 - total flux cleaned = 0.00604681 Jy ! Total flux subtracted in 200 components = 0.00604681 Jy ! Clean residual min=-0.007618 max=0.006099 Jy/beam ! Clean residual mean=-0.000047 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.844362 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.844362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183343Jy sigma=0.729583 ! Fit after self-cal, rms=0.182566Jy sigma=0.728888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182566Jy sigma=0.728888 ! Fit after self-cal, rms=0.180991Jy sigma=0.718594 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=4.056 mas, bpa=-81.29 degrees ! Estimated noise=2.42363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334829 Jy ! Component: 100 - total flux cleaned = 0.00414697 Jy ! Component: 150 - total flux cleaned = 0.00439671 Jy ! Component: 200 - total flux cleaned = 0.00445081 Jy ! Total flux subtracted in 200 components = 0.00445081 Jy ! Clean residual min=-0.006696 max=0.005817 Jy/beam ! Clean residual mean=-0.000089 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.848813 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.848813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180831Jy sigma=0.718438 ! Fit after self-cal, rms=0.180859Jy sigma=0.718400 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.94051e-05 Jy ! Component: 100 - total flux cleaned = 5.99202e-05 Jy ! Component: 150 - total flux cleaned = 5.89192e-05 Jy ! Component: 200 - total flux cleaned = 1.36396e-05 Jy ! Total flux subtracted in 200 components = 1.36396e-05 Jy ! Clean residual min=-0.006689 max=0.005822 Jy/beam ! Clean residual mean=-0.000088 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.848826 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.848826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180820Jy sigma=0.718283 ! Fit after self-cal, rms=0.180815Jy sigma=0.718274 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180815Jy sigma=0.718274 ! Fit after self-cal, rms=0.179884Jy sigma=0.712144 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=4.052 mas, bpa=-81.32 degrees ! Estimated noise=2.4254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235316 Jy ! Component: 100 - total flux cleaned = 0.00294053 Jy ! Component: 150 - total flux cleaned = 0.00309005 Jy ! Component: 200 - total flux cleaned = 0.0030907 Jy ! Total flux subtracted in 200 components = 0.0030907 Jy ! Clean residual min=-0.006235 max=0.005567 Jy/beam ! Clean residual mean=-0.000110 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.851917 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.851917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179790Jy sigma=0.712079 ! Fit after self-cal, rms=0.179823Jy sigma=0.712069 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27696e-05 Jy ! Component: 100 - total flux cleaned = 1.1531e-05 Jy ! Component: 150 - total flux cleaned = 1.10417e-05 Jy ! Component: 200 - total flux cleaned = 9.81407e-06 Jy ! Total flux subtracted in 200 components = 9.81407e-06 Jy ! Clean residual min=-0.006216 max=0.005527 Jy/beam ! Clean residual mean=-0.000110 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.851927 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.851927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179798Jy sigma=0.711977 ! Fit after self-cal, rms=0.179794Jy sigma=0.711973 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179794Jy sigma=0.711973 ! Fit after self-cal, rms=0.179971Jy sigma=0.711810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.646 mas, bmaj=9.752 mas, bpa=74.09 degrees ! Estimated noise=3.71667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364324 Jy ! Component: 100 - total flux cleaned = -0.000363851 Jy ! Component: 150 - total flux cleaned = -0.000364514 Jy ! Component: 200 - total flux cleaned = -0.000365257 Jy ! Total flux subtracted in 200 components = -0.000365257 Jy ! Clean residual min=-0.007229 max=0.006444 Jy/beam ! Clean residual mean=-0.000236 rms=0.001998 Jy/beam ! Combined flux in latest and established models = 0.851562 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.851562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179978Jy sigma=0.711858 ! Fit after self-cal, rms=0.179993Jy sigma=0.711798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227549 Jy ! Component: 100 - total flux cleaned = -0.000228571 Jy ! Component: 150 - total flux cleaned = -0.000228479 Jy ! Component: 200 - total flux cleaned = -0.000210938 Jy ! Total flux subtracted in 200 components = -0.000210938 Jy ! Clean residual min=-0.007202 max=0.006467 Jy/beam ! Clean residual mean=-0.000226 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 0.851351 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.851351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180002Jy sigma=0.711886 ! Fit after self-cal, rms=0.180006Jy sigma=0.711861 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=4.05 mas, bpa=-81.34 degrees ! Estimated noise=2.42702 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.571 x 4.05 at -81.34 degrees (North through East) ! Clean map min=-0.0057774 max=0.7628 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180006Jy sigma=0.711861 ! Fit after self-cal, rms=0.180562Jy sigma=0.617697 ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=4.05 mas, bpa=-81.32 degrees ! Estimated noise=2.43229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020224 Jy ! Component: 100 - total flux cleaned = 0.00279378 Jy ! Component: 150 - total flux cleaned = 0.00309033 Jy ! Component: 200 - total flux cleaned = 0.00322192 Jy ! Total flux subtracted in 200 components = 0.00322192 Jy ! Clean residual min=-0.006155 max=0.005623 Jy/beam ! Clean residual mean=-0.000115 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.854573 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.854573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180461Jy sigma=0.617699 ! Fit after self-cal, rms=0.180445Jy sigma=0.617692 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.31859e-05 Jy ! Component: 100 - total flux cleaned = 6.33518e-05 Jy ! Component: 150 - total flux cleaned = 6.3197e-05 Jy ! Component: 200 - total flux cleaned = 9.11479e-05 Jy ! Total flux subtracted in 200 components = 9.11479e-05 Jy ! Clean residual min=-0.006140 max=0.005622 Jy/beam ! Clean residual mean=-0.000116 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.854664 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.854664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180435Jy sigma=0.617626 ! Fit after self-cal, rms=0.180432Jy sigma=0.617620 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180432Jy sigma=0.617620 ! Fit after self-cal, rms=0.180675Jy sigma=0.617494 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=3.736 mas, bpa=-79.21 degrees ! Estimated noise=3.21801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.589896 Jy ! Component: 100 - total flux cleaned = 0.721519 Jy ! Component: 150 - total flux cleaned = 0.772263 Jy ! Component: 200 - total flux cleaned = 0.802577 Jy ! Total flux subtracted in 200 components = 0.802577 Jy ! Clean residual min=-0.008462 max=0.015825 Jy/beam ! Clean residual mean=0.000014 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.802577 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.802577 Jy ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=4.046 mas, bpa=-81.34 degrees ! Estimated noise=2.43416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023961 Jy ! Component: 100 - total flux cleaned = 0.0372177 Jy ! Component: 150 - total flux cleaned = 0.0448723 Jy ! Component: 200 - total flux cleaned = 0.0493874 Jy ! Total flux subtracted in 200 components = 0.0493874 Jy ! Clean residual min=-0.006073 max=0.005514 Jy/beam ! Clean residual mean=-0.000054 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.851965 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.851965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=9.749 mas, bpa=74.15 degrees ! Estimated noise=3.73142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262302 Jy ! Component: 100 - total flux cleaned = 0.00270581 Jy ! Component: 150 - total flux cleaned = 0.00273401 Jy ! Component: 200 - total flux cleaned = 0.00273531 Jy ! Total flux subtracted in 200 components = 0.00273531 Jy ! Clean residual min=-0.007008 max=0.006038 Jy/beam ! Clean residual mean=-0.000296 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.8547 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07039e-05 Jy ! Component: 100 - total flux cleaned = 2.21609e-05 Jy ! Component: 150 - total flux cleaned = 3.90894e-05 Jy ! Component: 200 - total flux cleaned = 3.77364e-05 Jy ! Total flux subtracted in 200 components = 3.77364e-05 Jy ! Clean residual min=-0.006997 max=0.006041 Jy/beam ! Clean residual mean=-0.000298 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.854738 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.854738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=4.046 mas, bpa=-81.34 degrees ! Estimated noise=2.43416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135709 Jy ! Component: 100 - total flux cleaned = 0.0004934 Jy ! Component: 150 - total flux cleaned = 0.000812591 Jy ! Component: 200 - total flux cleaned = 0.000977774 Jy ! Total flux subtracted in 200 components = 0.000977774 Jy ! Clean residual min=-0.006137 max=0.005474 Jy/beam ! Clean residual mean=-0.000112 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.855715 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.855716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180692Jy sigma=0.617159 ! Fit after self-cal, rms=0.180678Jy sigma=0.617079 wmodel J0726+7911_S_map.mod ! Writing 50 model components to file: J0726+7911_S_map.mod wobs J0726+7911_S_uvs.fits ! Writing UV FITS file: J0726+7911_S_uvs.fits wwins J0726+7911_S_map.win ! wwins: Wrote 1 windows to J0726+7911_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00269731 Jy ! Component: 100 - total flux cleaned = -0.00436165 Jy ! Component: 150 - total flux cleaned = -0.00535893 Jy ! Component: 200 - total flux cleaned = -0.006227 Jy ! Component: 250 - total flux cleaned = -0.0067924 Jy ! Component: 300 - total flux cleaned = -0.00752919 Jy ! Component: 350 - total flux cleaned = -0.00816027 Jy ! Component: 400 - total flux cleaned = -0.00860308 Jy ! Component: 450 - total flux cleaned = -0.00912705 Jy ! Component: 500 - total flux cleaned = -0.00964425 Jy ! Component: 550 - total flux cleaned = -0.00998469 Jy ! Component: 600 - total flux cleaned = -0.0103202 Jy ! Component: 650 - total flux cleaned = -0.0104865 Jy ! Component: 700 - total flux cleaned = -0.0107356 Jy ! Component: 750 - total flux cleaned = -0.011225 Jy ! Component: 800 - total flux cleaned = -0.0114665 Jy ! Component: 850 - total flux cleaned = -0.0116269 Jy ! Component: 900 - total flux cleaned = -0.0121033 Jy ! Component: 950 - total flux cleaned = -0.0123394 Jy ! Component: 1000 - total flux cleaned = -0.01273 Jy ! Component: 1050 - total flux cleaned = -0.0130393 Jy ! Component: 1100 - total flux cleaned = -0.0131927 Jy ! Component: 1150 - total flux cleaned = -0.0134217 Jy ! Component: 1200 - total flux cleaned = -0.0137242 Jy ! Component: 1250 - total flux cleaned = -0.0138744 Jy ! Component: 1300 - total flux cleaned = -0.0141725 Jy ! Component: 1350 - total flux cleaned = -0.0143203 Jy ! Component: 1400 - total flux cleaned = -0.0144678 Jy ! Component: 1450 - total flux cleaned = -0.0147593 Jy ! Component: 1500 - total flux cleaned = -0.0149037 Jy ! Component: 1550 - total flux cleaned = -0.0151191 Jy ! Component: 1600 - total flux cleaned = -0.0151192 Jy ! Component: 1650 - total flux cleaned = -0.0151901 Jy ! Component: 1700 - total flux cleaned = -0.0154013 Jy ! Component: 1750 - total flux cleaned = -0.0154017 Jy ! Component: 1800 - total flux cleaned = -0.0157491 Jy ! Component: 1850 - total flux cleaned = -0.0156109 Jy ! Component: 1900 - total flux cleaned = -0.0156798 Jy ! Component: 1950 - total flux cleaned = -0.0157479 Jy ! Component: 2000 - total flux cleaned = -0.0157481 Jy ! Component: 2050 - total flux cleaned = -0.0158831 Jy ! Component: 2100 - total flux cleaned = -0.0158829 Jy ! Component: 2150 - total flux cleaned = -0.015816 Jy ! Component: 2200 - total flux cleaned = -0.0160152 Jy ! Component: 2250 - total flux cleaned = -0.0160152 Jy ! Component: 2300 - total flux cleaned = -0.0159493 Jy ! Component: 2350 - total flux cleaned = -0.0159495 Jy ! Component: 2400 - total flux cleaned = -0.0160794 Jy ! Component: 2450 - total flux cleaned = -0.0160793 Jy ! Component: 2500 - total flux cleaned = -0.0160791 Jy ! Component: 2550 - total flux cleaned = -0.0160791 Jy ! Component: 2600 - total flux cleaned = -0.0160152 Jy ! Component: 2650 - total flux cleaned = -0.0160783 Jy ! Component: 2700 - total flux cleaned = -0.0161412 Jy ! Component: 2750 - total flux cleaned = -0.0160158 Jy ! Component: 2800 - total flux cleaned = -0.0160156 Jy ! Component: 2850 - total flux cleaned = -0.0160777 Jy ! Component: 2900 - total flux cleaned = -0.0159538 Jy ! Component: 2950 - total flux cleaned = -0.0160155 Jy ! Component: 3000 - total flux cleaned = -0.0158317 Jy ! Component: 3050 - total flux cleaned = -0.016015 Jy ! Component: 3100 - total flux cleaned = -0.0159543 Jy ! Component: 3150 - total flux cleaned = -0.0160148 Jy ! Component: 3200 - total flux cleaned = -0.0160147 Jy ! Component: 3250 - total flux cleaned = -0.0160147 Jy ! Component: 3300 - total flux cleaned = -0.0161343 Jy ! Component: 3350 - total flux cleaned = -0.0161345 Jy ! Component: 3400 - total flux cleaned = -0.0160751 Jy ! Component: 3450 - total flux cleaned = -0.0162515 Jy ! Component: 3500 - total flux cleaned = -0.0163689 Jy ! Component: 3550 - total flux cleaned = -0.0161349 Jy ! Component: 3600 - total flux cleaned = -0.0162511 Jy ! Component: 3650 - total flux cleaned = -0.0163089 Jy ! Component: 3700 - total flux cleaned = -0.0163089 Jy ! Component: 3750 - total flux cleaned = -0.0161938 Jy ! Component: 3800 - total flux cleaned = -0.0161364 Jy ! Component: 3850 - total flux cleaned = -0.0162503 Jy ! Component: 3900 - total flux cleaned = -0.0161932 Jy ! Component: 3950 - total flux cleaned = -0.0160235 Jy ! Component: 4000 - total flux cleaned = -0.0162494 Jy ! Component: 4050 - total flux cleaned = -0.0161931 Jy ! Total flux subtracted in 4096 components = -0.0162492 Jy ! Clean residual min=-0.003518 max=0.003118 Jy/beam ! Clean residual mean=0.000025 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.839466 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 370 components and 0.839465 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0726+7911_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.572 x 4.046 at -81.34 degrees (North through East) ! Clean map min=-0.0052402 max=0.76399 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0726+7911_S_map.fits wmodel /scr/pima/rv102_uvs/J0726+7911_S_map.mod ! Writing 370 model components to file: /scr/pima/rv102_uvs/J0726+7911_S_map.mod wobs /scr/pima/rv102_uvs/J0726+7911_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0726+7911_S_uvs.fits wwins /scr/pima/rv102_uvs/J0726+7911_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J0726+7911_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.763993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000978865 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.384374 0.384374 0.768749 1.5375 3.075 6.14999 12.3 24.6 49.1999 98.3999 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.763 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 780.488 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0726+7911_S_dfm.log closed on Sat Nov 9 09:32:27 2019