! Started logfile: /scr/pima/rv102_uvs/J0646+4451_X_uvs.log on Sat Feb 27 22:24:21 2016 obs /scr/pima/rv102_uvs/J0646+4451_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0646+4451_X_uva.fits ! AN table 1: 110 integrations on 6 of 6 possible baselines. ! AN table 2: 44 integrations on 3 of 3 possible baselines. ! AN table 3: 36 integrations on 10 of 10 possible baselines. ! AN table 4: 11 integrations on 1 of 1 possible baselines. ! AN table 5: 22 integrations on 10 of 10 possible baselines. ! AN table 6: 13 integrations on 55 of 55 possible baselines. ! AN table 7: 12 integrations on 78 of 78 possible baselines. ! AN table 8: 10 integrations on 1 of 1 possible baselines. ! AN table 9: 11 integrations on 6 of 6 possible baselines. ! AN table 10: 13 integrations on 28 of 28 possible baselines. ! AN table 11: 10 integrations on 3 of 3 possible baselines. ! AN table 12: 31 integrations on 6 of 6 possible baselines. ! AN table 13: 11 integrations on 1 of 1 possible baselines. ! AN table 14: 9 integrations on 3 of 3 possible baselines. ! AN table 15: 16 integrations on 3 of 3 possible baselines. ! AN table 16: 11 integrations on 3 of 3 possible baselines. ! AN table 17: 23 integrations on 36 of 36 possible baselines. ! AN table 18: 11 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.638067 visibilities/baseline/integration-bin. ! Found source: J0646+4451 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 12256 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0646+4451_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 320 telescope corrections were flagged in sub-array 1. ! A total of 84 telescope corrections were flagged in sub-array 2. ! A total of 124 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 40 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 62 telescope corrections were flagged in sub-array 7. ! A total of 20 telescope corrections were flagged in sub-array 8. ! A total of 44 telescope corrections were flagged in sub-array 9. ! A total of 47 telescope corrections were flagged in sub-array 10. ! A total of 30 telescope corrections were flagged in sub-array 11. ! A total of 60 telescope corrections were flagged in sub-array 12. ! A total of 22 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 24 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 144 telescope corrections were flagged in sub-array 17. ! A total of 42 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 2. ! A total of 320 telescope corrections were flagged in sub-array 1. ! A total of 84 telescope corrections were flagged in sub-array 2. ! A total of 124 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 40 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 62 telescope corrections were flagged in sub-array 7. ! A total of 20 telescope corrections were flagged in sub-array 8. ! A total of 44 telescope corrections were flagged in sub-array 9. ! A total of 47 telescope corrections were flagged in sub-array 10. ! A total of 30 telescope corrections were flagged in sub-array 11. ! A total of 60 telescope corrections were flagged in sub-array 12. ! A total of 22 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 24 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 144 telescope corrections were flagged in sub-array 17. ! A total of 42 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 3. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 156 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 61 telescope corrections were flagged in sub-array 5. ! A total of 76 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! A total of 20 telescope corrections were flagged in sub-array 8. ! A total of 44 telescope corrections were flagged in sub-array 9. ! A total of 62 telescope corrections were flagged in sub-array 10. ! A total of 30 telescope corrections were flagged in sub-array 11. ! A total of 100 telescope corrections were flagged in sub-array 12. ! A total of 22 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 48 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 151 telescope corrections were flagged in sub-array 17. ! A total of 66 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 4. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 156 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 61 telescope corrections were flagged in sub-array 5. ! A total of 76 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! A total of 20 telescope corrections were flagged in sub-array 8. ! A total of 44 telescope corrections were flagged in sub-array 9. ! A total of 62 telescope corrections were flagged in sub-array 10. ! A total of 30 telescope corrections were flagged in sub-array 11. ! A total of 100 telescope corrections were flagged in sub-array 12. ! A total of 22 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 48 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 151 telescope corrections were flagged in sub-array 17. ! A total of 66 telescope corrections were flagged in sub-array 18. ! ! Fit before self-cal, rms=1.702931Jy sigma=8.174108 ! Fit after self-cal, rms=0.756268Jy sigma=4.394727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5197 mas, bmaj=0.9001 mas, bpa=8.439 degrees ! Estimated noise=2.43066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.643581 Jy ! Component: 100 - total flux cleaned = 0.917758 Jy ! Total flux subtracted in 100 components = 0.917758 Jy ! Clean residual min=-0.084217 max=0.143275 Jy/beam ! Clean residual mean=0.000874 rms=0.022647 Jy/beam ! Combined flux in latest and established models = 0.917758 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.917758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749428Jy sigma=3.711815 ! Fit after self-cal, rms=0.748425Jy sigma=3.704315 ! Inverting map ! Added new window around map position (-8.2, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167024 Jy ! Component: 100 - total flux cleaned = 0.286371 Jy ! Total flux subtracted in 100 components = 0.286371 Jy ! Clean residual min=-0.083646 max=0.122838 Jy/beam ! Clean residual mean=0.000639 rms=0.021185 Jy/beam ! Combined flux in latest and established models = 1.20413 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.20413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.672638Jy sigma=3.525118 ! Fit after self-cal, rms=0.669991Jy sigma=3.514864 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5987 mas, bmaj=1.009 mas, bpa=8.516 degrees ! Estimated noise=1.97744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121648 Jy ! Component: 100 - total flux cleaned = 0.202892 Jy ! Component: 150 - total flux cleaned = 0.258787 Jy ! Component: 200 - total flux cleaned = 0.298912 Jy ! Total flux subtracted in 200 components = 0.298912 Jy ! Clean residual min=-0.090288 max=0.132133 Jy/beam ! Clean residual mean=0.001935 rms=0.027899 Jy/beam ! Combined flux in latest and established models = 1.50304 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 1.50304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.622258Jy sigma=3.470437 ! Fit after self-cal, rms=0.620540Jy sigma=3.463129 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5987 x 1.009 at 8.516 degrees (North through East) ! Clean map min=-0.08264 max=0.88607 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* NL 1.00* NY 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! OV 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* NL 1.00* NY 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 1.00* ON 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* WF 1.00* ! WZ 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! OV 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* NL 1.00* NY 1.00* SC 1.00* ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! OV 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* NL 1.00* NY 1.00* SC 1.00* ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! OV 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.620540Jy sigma=3.463129 ! Fit after self-cal, rms=0.584969Jy sigma=3.588466 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5802 mas, bmaj=0.9782 mas, bpa=7.876 degrees ! Estimated noise=2.04512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431712 Jy ! Component: 100 - total flux cleaned = -0.00764749 Jy ! Component: 150 - total flux cleaned = -0.0159703 Jy ! Component: 200 - total flux cleaned = -0.0208049 Jy ! Total flux subtracted in 200 components = -0.0208049 Jy ! Clean residual min=-0.097441 max=0.143307 Jy/beam ! Clean residual mean=0.002247 rms=0.028671 Jy/beam ! Combined flux in latest and established models = 1.48224 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 1.48224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.588976Jy sigma=3.467031 ! Fit after self-cal, rms=0.588634Jy sigma=3.463346 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.588634Jy sigma=3.463346 ! Fit after self-cal, rms=0.588634Jy sigma=3.463346 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5802 mas, bmaj=0.9782 mas, bpa=7.876 degrees ! Estimated noise=2.04512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686286 Jy ! Component: 100 - total flux cleaned = 0.00373149 Jy ! Component: 150 - total flux cleaned = 0.00310536 Jy ! Component: 200 - total flux cleaned = 0.00188985 Jy ! Total flux subtracted in 200 components = 0.00188985 Jy ! Clean residual min=-0.096042 max=0.140028 Jy/beam ! Clean residual mean=0.002236 rms=0.028349 Jy/beam ! Combined flux in latest and established models = 1.48413 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 1.48413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590521Jy sigma=3.424545 ! Fit after self-cal, rms=0.590638Jy sigma=3.423719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127313 Jy ! Component: 100 - total flux cleaned = 0.198269 Jy ! Component: 150 - total flux cleaned = 0.237764 Jy ! Component: 200 - total flux cleaned = 0.255543 Jy ! Total flux subtracted in 200 components = 0.255543 Jy ! Clean residual min=-0.091103 max=0.119741 Jy/beam ! Clean residual mean=0.000938 rms=0.026079 Jy/beam ! Combined flux in latest and established models = 1.73967 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 1.73967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569841Jy sigma=3.163643 ! Fit after self-cal, rms=0.563660Jy sigma=3.139191 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.563660Jy sigma=3.139191 ! Fit after self-cal, rms=0.563660Jy sigma=3.139191 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5802 mas, bmaj=0.9782 mas, bpa=7.876 degrees ! Estimated noise=2.04512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542519 Jy ! Component: 100 - total flux cleaned = 0.0740367 Jy ! Component: 150 - total flux cleaned = 0.0789992 Jy ! Component: 200 - total flux cleaned = 0.0822902 Jy ! Total flux subtracted in 200 components = 0.0822902 Jy ! Clean residual min=-0.089596 max=0.097861 Jy/beam ! Clean residual mean=0.000525 rms=0.025162 Jy/beam ! Combined flux in latest and established models = 1.82196 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 1.82196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.558557Jy sigma=3.075955 ! Fit after self-cal, rms=0.557466Jy sigma=3.071277 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251002 Jy ! Component: 100 - total flux cleaned = 0.0272326 Jy ! Component: 150 - total flux cleaned = 0.0291113 Jy ! Component: 200 - total flux cleaned = 0.0316956 Jy ! Total flux subtracted in 200 components = 0.0316956 Jy ! Clean residual min=-0.089249 max=0.093195 Jy/beam ! Clean residual mean=0.000366 rms=0.024822 Jy/beam ! Combined flux in latest and established models = 1.85365 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 1.85365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554450Jy sigma=3.045913 ! Fit after self-cal, rms=0.554034Jy sigma=3.044268 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554034Jy sigma=3.044268 ! Fit after self-cal, rms=0.554034Jy sigma=3.044268 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=2.97 mas, bpa=57.87 degrees ! Estimated noise=3.65261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184041 Jy ! Component: 100 - total flux cleaned = 0.0272029 Jy ! Component: 150 - total flux cleaned = 0.0271985 Jy ! Component: 200 - total flux cleaned = 0.0271867 Jy ! Total flux subtracted in 200 components = 0.0271867 Jy ! Clean residual min=-0.218273 max=0.250606 Jy/beam ! Clean residual mean=0.000877 rms=0.073217 Jy/beam ! Combined flux in latest and established models = 1.88084 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 1.88084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.557828Jy sigma=3.073013 ! Fit after self-cal, rms=0.556308Jy sigma=3.063011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103805 Jy ! Component: 100 - total flux cleaned = 0.010408 Jy ! Component: 150 - total flux cleaned = 0.0104531 Jy ! Component: 200 - total flux cleaned = 0.0125647 Jy ! Total flux subtracted in 200 components = 0.0125647 Jy ! Clean residual min=-0.216984 max=0.245328 Jy/beam ! Clean residual mean=0.000635 rms=0.072537 Jy/beam ! Combined flux in latest and established models = 1.89341 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 1.89341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561924Jy sigma=3.092931 ! Fit after self-cal, rms=0.561867Jy sigma=3.090339 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.5802 mas, bmaj=0.9782 mas, bpa=7.876 degrees ! Estimated noise=2.04512 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5802 x 0.9782 at 7.876 degrees (North through East) ! Clean map min=-0.08482 max=0.83616 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561867Jy sigma=3.090339 ! Fit after self-cal, rms=0.561717Jy sigma=3.090057 ! Inverting map and beam ! Estimated beam: bmin=0.5802 mas, bmaj=0.9782 mas, bpa=7.878 degrees ! Estimated noise=2.04507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230297 Jy ! Component: 100 - total flux cleaned = 0.0147235 Jy ! Component: 150 - total flux cleaned = 0.0193847 Jy ! Component: 200 - total flux cleaned = 0.0252119 Jy ! Total flux subtracted in 200 components = 0.0252119 Jy ! Clean residual min=-0.089408 max=0.091827 Jy/beam ! Clean residual mean=0.000046 rms=0.024556 Jy/beam ! Combined flux in latest and established models = 1.91862 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 1.91862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554165Jy sigma=3.041176 ! Fit after self-cal, rms=0.552943Jy sigma=3.036925 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032841 Jy ! Component: 100 - total flux cleaned = -0.00319282 Jy ! Component: 150 - total flux cleaned = -0.00531606 Jy ! Component: 200 - total flux cleaned = -0.0066245 Jy ! Total flux subtracted in 200 components = -0.0066245 Jy ! Clean residual min=-0.087642 max=0.090781 Jy/beam ! Clean residual mean=0.000078 rms=0.024468 Jy/beam ! Combined flux in latest and established models = 1.91199 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 1.91199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.551255Jy sigma=3.023660 ! Fit after self-cal, rms=0.550938Jy sigma=3.022904 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550938Jy sigma=3.022904 ! Fit after self-cal, rms=0.550651Jy sigma=3.022523 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5067 mas, bmaj=0.8787 mas, bpa=7.916 degrees ! Estimated noise=2.52412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.588201 Jy ! Component: 100 - total flux cleaned = 0.84964 Jy ! Component: 150 - total flux cleaned = 1.03621 Jy ! Component: 200 - total flux cleaned = 1.18249 Jy ! Total flux subtracted in 200 components = 1.18249 Jy ! Clean residual min=-0.084244 max=0.107809 Jy/beam ! Clean residual mean=0.000670 rms=0.020719 Jy/beam ! Combined flux in latest and established models = 1.18249 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.18249 Jy ! Inverting map and beam ! Estimated beam: bmin=0.5803 mas, bmaj=0.9781 mas, bpa=7.885 degrees ! Estimated noise=2.04458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171816 Jy ! Component: 100 - total flux cleaned = 0.302149 Jy ! Component: 150 - total flux cleaned = 0.406934 Jy ! Component: 200 - total flux cleaned = 0.492843 Jy ! Total flux subtracted in 200 components = 0.492843 Jy ! Clean residual min=-0.092356 max=0.104440 Jy/beam ! Clean residual mean=0.001313 rms=0.024847 Jy/beam ! Combined flux in latest and established models = 1.67533 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 1.67533 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=2.969 mas, bpa=57.86 degrees ! Estimated noise=3.65191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135698 Jy ! Component: 100 - total flux cleaned = 0.207356 Jy ! Component: 150 - total flux cleaned = 0.225388 Jy ! Component: 200 - total flux cleaned = 0.239862 Jy ! Total flux subtracted in 200 components = 0.239862 Jy ! Clean residual min=-0.199742 max=0.229309 Jy/beam ! Clean residual mean=0.000640 rms=0.068790 Jy/beam ! Combined flux in latest and established models = 1.91519 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124178 Jy ! Component: 100 - total flux cleaned = 0.0231008 Jy ! Component: 150 - total flux cleaned = 0.029427 Jy ! Component: 200 - total flux cleaned = 0.0313874 Jy ! Total flux subtracted in 200 components = 0.0313874 Jy ! Clean residual min=-0.201591 max=0.227066 Jy/beam ! Clean residual mean=0.000022 rms=0.068386 Jy/beam ! Combined flux in latest and established models = 1.94658 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 1.94658 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.5803 mas, bmaj=0.9781 mas, bpa=7.885 degrees ! Estimated noise=2.04458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00617934 Jy ! Component: 100 - total flux cleaned = 0.0102527 Jy ! Component: 150 - total flux cleaned = 0.0138845 Jy ! Component: 200 - total flux cleaned = 0.0138982 Jy ! Total flux subtracted in 200 components = 0.0138982 Jy ! Clean residual min=-0.087020 max=0.094802 Jy/beam ! Clean residual mean=-0.000041 rms=0.023680 Jy/beam ! Combined flux in latest and established models = 1.96048 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 1.96048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.558241Jy sigma=2.985249 ! Fit after self-cal, rms=0.549363Jy sigma=2.953310 wmodel /scr/pima/rv102_uvs/J0646+4451_X_map.mod ! Writing 68 model components to file: /scr/pima/rv102_uvs/J0646+4451_X_map.mod wobs /scr/pima/rv102_uvs/J0646+4451_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0646+4451_X_uvs.fits wwins /scr/pima/rv102_uvs/J0646+4451_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J0646+4451_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269085 Jy ! Component: 100 - total flux cleaned = 0.0456506 Jy ! Component: 150 - total flux cleaned = 0.0681962 Jy ! Component: 200 - total flux cleaned = 0.0842106 Jy ! Component: 250 - total flux cleaned = 0.09694 Jy ! Component: 300 - total flux cleaned = 0.109344 Jy ! Component: 350 - total flux cleaned = 0.124092 Jy ! Component: 400 - total flux cleaned = 0.13194 Jy ! Component: 450 - total flux cleaned = 0.140897 Jy ! Component: 500 - total flux cleaned = 0.149668 Jy ! Component: 550 - total flux cleaned = 0.157021 Jy ! Component: 600 - total flux cleaned = 0.164201 Jy ! Component: 650 - total flux cleaned = 0.168871 Jy ! Component: 700 - total flux cleaned = 0.172316 Jy ! Component: 750 - total flux cleaned = 0.173466 Jy ! Component: 800 - total flux cleaned = 0.180161 Jy ! Component: 850 - total flux cleaned = 0.185639 Jy ! Component: 900 - total flux cleaned = 0.188875 Jy ! Component: 950 - total flux cleaned = 0.193116 Jy ! Component: 1000 - total flux cleaned = 0.196249 Jy ! Component: 1050 - total flux cleaned = 0.201375 Jy ! Component: 1100 - total flux cleaned = 0.205414 Jy ! Component: 1150 - total flux cleaned = 0.206423 Jy ! Component: 1200 - total flux cleaned = 0.214286 Jy ! Component: 1250 - total flux cleaned = 0.21815 Jy ! Component: 1300 - total flux cleaned = 0.220058 Jy ! Component: 1350 - total flux cleaned = 0.222904 Jy ! Component: 1400 - total flux cleaned = 0.225682 Jy ! Component: 1450 - total flux cleaned = 0.22844 Jy ! Component: 1500 - total flux cleaned = 0.230249 Jy ! Component: 1550 - total flux cleaned = 0.232937 Jy ! Component: 1600 - total flux cleaned = 0.237342 Jy ! Component: 1650 - total flux cleaned = 0.239072 Jy ! Component: 1700 - total flux cleaned = 0.242511 Jy ! Component: 1750 - total flux cleaned = 0.245898 Jy ! Component: 1800 - total flux cleaned = 0.24758 Jy ! Component: 1850 - total flux cleaned = 0.250907 Jy ! Component: 1900 - total flux cleaned = 0.254178 Jy ! Component: 1950 - total flux cleaned = 0.25336 Jy ! Component: 2000 - total flux cleaned = 0.254167 Jy ! Component: 2050 - total flux cleaned = 0.257336 Jy ! Component: 2100 - total flux cleaned = 0.258895 Jy ! Component: 2150 - total flux cleaned = 0.258127 Jy ! Component: 2200 - total flux cleaned = 0.264249 Jy ! Component: 2250 - total flux cleaned = 0.261968 Jy ! Component: 2300 - total flux cleaned = 0.264206 Jy ! Component: 2350 - total flux cleaned = 0.265683 Jy ! Component: 2400 - total flux cleaned = 0.265685 Jy ! Component: 2450 - total flux cleaned = 0.270041 Jy ! Component: 2500 - total flux cleaned = 0.271472 Jy ! Component: 2550 - total flux cleaned = 0.272183 Jy ! Component: 2600 - total flux cleaned = 0.273601 Jy ! Component: 2650 - total flux cleaned = 0.275692 Jy ! Component: 2700 - total flux cleaned = 0.279819 Jy ! Component: 2750 - total flux cleaned = 0.279814 Jy ! Component: 2800 - total flux cleaned = 0.281828 Jy ! Component: 2850 - total flux cleaned = 0.281838 Jy ! Component: 2900 - total flux cleaned = 0.284479 Jy ! Component: 2950 - total flux cleaned = 0.283823 Jy ! Component: 3000 - total flux cleaned = 0.287721 Jy ! Component: 3050 - total flux cleaned = 0.291572 Jy ! Component: 3100 - total flux cleaned = 0.2903 Jy ! Component: 3150 - total flux cleaned = 0.292196 Jy ! Component: 3200 - total flux cleaned = 0.2922 Jy ! Component: 3250 - total flux cleaned = 0.293443 Jy ! Component: 3300 - total flux cleaned = 0.295278 Jy ! Component: 3350 - total flux cleaned = 0.294677 Jy ! Component: 3400 - total flux cleaned = 0.295887 Jy ! Component: 3450 - total flux cleaned = 0.294693 Jy ! Component: 3500 - total flux cleaned = 0.292913 Jy ! Component: 3550 - total flux cleaned = 0.297033 Jy ! Component: 3600 - total flux cleaned = 0.297035 Jy ! Component: 3650 - total flux cleaned = 0.295883 Jy ! Component: 3700 - total flux cleaned = 0.296458 Jy ! Component: 3750 - total flux cleaned = 0.295891 Jy ! Component: 3800 - total flux cleaned = 0.296448 Jy ! Component: 3850 - total flux cleaned = 0.294217 Jy ! Component: 3900 - total flux cleaned = 0.29478 Jy ! Component: 3950 - total flux cleaned = 0.295879 Jy ! Component: 4000 - total flux cleaned = 0.296418 Jy ! Component: 4050 - total flux cleaned = 0.295875 Jy ! Total flux subtracted in 4096 components = 0.294798 Jy ! Clean residual min=-0.028774 max=0.034166 Jy/beam ! Clean residual mean=-0.000534 rms=0.009759 Jy/beam ! Combined flux in latest and established models = 2.25528 Jy keep ! Adding 434 model components to the UV plane model. ! The established model now contains 501 components and 2.25528 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0646+4451_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5803 x 0.9781 at 7.885 degrees (North through East) ! Clean map min=-0.054597 max=0.80901 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0646+4451_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.809013 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00962831 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.57039 3.57039 7.14078 14.2816 28.5631 57.1262 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0288 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.809 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 84.024 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0646+4451_X_uvs.log closed on Sat Feb 27 22:24:25 2016