! Started logfile: /scr/pima/rv102_uvs/J0646+4451_S_dfm.log on Sat Nov 9 09:32:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J0646+4451_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0646+4451_S_uva.fits ! AN table 1: 27 integrations on 6 of 6 possible baselines. ! AN table 2: 10 integrations on 3 of 3 possible baselines. ! AN table 3: 8 integrations on 10 of 10 possible baselines. ! AN table 4: 2 integrations on 1 of 1 possible baselines. ! AN table 5: 4 integrations on 10 of 10 possible baselines. ! AN table 6: 3 integrations on 55 of 55 possible baselines. ! AN table 7: 3 integrations on 66 of 66 possible baselines. ! AN table 8: 2 integrations on 3 of 3 possible baselines. ! AN table 9: 2 integrations on 6 of 6 possible baselines. ! AN table 10: 3 integrations on 28 of 28 possible baselines. ! AN table 11: 7 integrations on 6 of 6 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! AN table 13: 2 integrations on 3 of 3 possible baselines. ! AN table 14: 3 integrations on 3 of 3 possible baselines. ! AN table 15: 2 integrations on 3 of 3 possible baselines. ! AN table 16: 5 integrations on 28 of 28 possible baselines. ! AN table 17: 2 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.940239 visibilities/baseline/integration-bin. ! Found source: J0646+4451 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3776 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0646+4451_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 14. ! A total of 16 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 14. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 2 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 14. ! A total of 16 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 3 telescope corrections were flagged in sub-array 14. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 2 telescope corrections were flagged in sub-array 17. ! ! Fit before self-cal, rms=2.419147Jy sigma=11.008739 ! Fit after self-cal, rms=1.350439Jy sigma=5.477574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.177 mas, bmaj=3.432 mas, bpa=5.164 degrees ! Estimated noise=3.68441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62693 Jy ! Component: 100 - total flux cleaned = 1.98397 Jy ! Total flux subtracted in 100 components = 1.98397 Jy ! Clean residual min=-0.061344 max=0.114136 Jy/beam ! Clean residual mean=-0.000070 rms=0.013835 Jy/beam ! Combined flux in latest and established models = 1.98397 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.98397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.699622Jy sigma=2.042836 ! Fit after self-cal, rms=0.699611Jy sigma=2.042830 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123043 Jy ! Component: 100 - total flux cleaned = 0.19448 Jy ! Total flux subtracted in 100 components = 0.19448 Jy ! Clean residual min=-0.054576 max=0.056228 Jy/beam ! Clean residual mean=-0.000052 rms=0.013214 Jy/beam ! Combined flux in latest and established models = 2.17845 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 2.17845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.663392Jy sigma=1.940241 ! Fit after self-cal, rms=0.663376Jy sigma=1.940174 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=3.879 mas, bpa=3.604 degrees ! Estimated noise=3.04626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202028 Jy ! Component: 100 - total flux cleaned = 0.0212421 Jy ! Component: 150 - total flux cleaned = 0.02296 Jy ! Component: 200 - total flux cleaned = 0.02367 Jy ! Total flux subtracted in 200 components = 0.02367 Jy ! Clean residual min=-0.057180 max=0.039912 Jy/beam ! Clean residual mean=-0.003267 rms=0.009746 Jy/beam ! Combined flux in latest and established models = 2.20212 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 17 components and 2.20212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.658177Jy sigma=1.927234 ! Fit after self-cal, rms=0.658174Jy sigma=1.927189 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.499 x 3.879 at 3.604 degrees (North through East) ! Clean map min=-0.053477 max=2.0818 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.93 NY 0.99 ON 0.97 WZ 0.95 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.21 NY 0.99 ON 0.97 WF 1.07 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.95 NL 0.99 NY 1.00 SC 1.05 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.09 HN 0.97 LA 1.03 MA 1.68 ! NL 0.99 NY 1.01 ON 1.01 PT 1.01 ! SC 1.05 WF 0.99 WZ 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.02 HN 1.02 KP 0.98 LA 1.01 ! MA 0.74 NL 0.99 NY 1.01 ON 1.00 ! PT 1.01 SC 1.03 WF 1.05 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 3.00 MK 0.90 NY 0.92 WZ 1.08 ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.08 MA 2.16 NL 1.07 NY 0.97 ! ON 1.01 SC 0.99 WF 1.11 WZ 1.15 ! ! Telescope amplitude corrections in sub-array 11: ! NY 1.04 ON 1.00 WF 1.01 WZ 1.24 ! ! Telescope amplitude corrections in sub-array 12: ! ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.07 LA 1.00 MK 0.68 NY 1.03 ! ON 1.01 PT 1.04 WF 1.04 WZ 1.05 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.58 MK 0.88 NY 0.94 ON 1.00 ! WZ 0.95 ! ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.03 ON 0.98 WF 1.11 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.98 NL 1.03 NY 1.00 SC 1.05 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.07 HN 0.96 LA 1.03 MA 1.00* ! NL 1.02 NY 1.00 ON 0.99 PT 1.07 ! SC 1.03 WF 1.01 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.01 KP 1.02 LA 1.01 ! MA 1.00* NL 1.02 NY 0.98 ON 1.07 ! PT 1.01 SC 1.00 WF 1.04 WZ 1.05 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.07 MA 1.00* NL 1.06 NY 0.96 ! ON 1.06 SC 0.98 WF 1.07 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.98 ON 0.99 WF 1.04 WZ 1.35 ! ! Telescope amplitude corrections in sub-array 12: ! ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.05 LA 1.02 MK 0.95 NY 0.99 ! ON 1.07 PT 1.03 WF 1.06 WZ 1.06 ! ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 1.16 NY 0.89 ON 1.08 ! WZ 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.49 NY 1.01 ON 1.02 WZ 0.98 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.62 NY 1.07 ON 0.99 WF 1.10 ! WZ 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.97 NL 1.00 NY 1.02 SC 1.06 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.09 HN 0.97 LA 0.97 MA 0.50 ! NL 0.96 NY 1.07 ON 1.04 PT 1.04 ! SC 1.04 WF 0.95 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.03 HN 1.01 KP 1.02 LA 1.00 ! MA 0.54 NL 1.01 NY 1.04 ON 1.07 ! PT 1.02 SC 1.02 WF 1.02 WZ 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.51 MK 1.22 NY 0.94 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.07 MA 0.48 NL 1.07 NY 0.98 ! ON 1.03 SC 0.99 WF 1.02 WZ 1.02 ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.99 ON 1.03 WF 1.04 WZ 1.26 ! ! Telescope amplitude corrections in sub-array 12: ! ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.03 LA 0.99 MK 0.91 NY 1.08 ! ON 1.03 PT 1.04 WF 1.03 WZ 1.10 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.54 MK 1.12 NY 0.94 ON 1.03 ! WZ 1.07 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.11 ON 1.02 WF 1.09 ! WZ 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.99 NL 1.00 NY 1.04 SC 1.04 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 HN 1.01 LA 1.01 MA 1.00* ! NL 0.94 NY 1.04 ON 1.02 PT 1.05 ! SC 1.05 WF 0.97 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.02 HN 1.05 KP 1.01 LA 1.03 ! MA 1.00* NL 0.97 NY 1.04 ON 1.03 ! PT 1.00 SC 1.03 WF 1.01 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* MK 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.11 MA 1.00* NL 1.03 NY 0.99 ! ON 1.02 SC 1.00 WF 1.07 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 11: ! NY 1.04 ON 0.97 WF 1.00 WZ 1.27 ! ! Telescope amplitude corrections in sub-array 12: ! ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.07 LA 1.00 MK 0.60 NY 1.11 ! ON 1.08 PT 1.02 WF 0.99 WZ 1.15 ! ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 0.72 NY 0.94 ON 1.14 ! WZ 1.10 ! ! ! Fit before self-cal, rms=0.658174Jy sigma=1.927189 ! Fit after self-cal, rms=0.307601Jy sigma=0.885920 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=3.867 mas, bpa=5.928 degrees ! Estimated noise=3.24147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169695 Jy ! Component: 100 - total flux cleaned = 0.0188651 Jy ! Component: 150 - total flux cleaned = 0.0206549 Jy ! Component: 200 - total flux cleaned = 0.0222907 Jy ! Total flux subtracted in 200 components = 0.0222907 Jy ! Clean residual min=-0.016486 max=0.016810 Jy/beam ! Clean residual mean=-0.000100 rms=0.003844 Jy/beam ! Combined flux in latest and established models = 2.22441 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 2.22441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305997Jy sigma=0.881185 ! Fit after self-cal, rms=0.305933Jy sigma=0.880719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305933Jy sigma=0.880719 ! Fit after self-cal, rms=0.349502Jy sigma=0.772221 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.419 mas, bmaj=3.867 mas, bpa=5.847 degrees ! Estimated noise=3.25199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154511 Jy ! Component: 100 - total flux cleaned = 0.0212915 Jy ! Component: 150 - total flux cleaned = 0.0226613 Jy ! Component: 200 - total flux cleaned = 0.0233132 Jy ! Total flux subtracted in 200 components = 0.0233132 Jy ! Clean residual min=-0.013698 max=0.012878 Jy/beam ! Clean residual mean=-0.000198 rms=0.003118 Jy/beam ! Combined flux in latest and established models = 2.24772 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 2.24772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348234Jy sigma=0.768454 ! Fit after self-cal, rms=0.348657Jy sigma=0.768366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70249e-05 Jy ! Component: 100 - total flux cleaned = 2.40487e-05 Jy ! Component: 150 - total flux cleaned = 2.02418e-05 Jy ! Component: 200 - total flux cleaned = -9.06875e-05 Jy ! Total flux subtracted in 200 components = -9.06875e-05 Jy ! Clean residual min=-0.013849 max=0.012749 Jy/beam ! Clean residual mean=-0.000197 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 2.24763 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 2.24763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348562Jy sigma=0.768028 ! Fit after self-cal, rms=0.348559Jy sigma=0.768017 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348559Jy sigma=0.768017 ! Fit after self-cal, rms=0.281741Jy sigma=0.658620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=3.866 mas, bpa=5.809 degrees ! Estimated noise=3.25302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738247 Jy ! Component: 100 - total flux cleaned = 0.00902571 Jy ! Component: 150 - total flux cleaned = 0.0100227 Jy ! Component: 200 - total flux cleaned = 0.0106239 Jy ! Total flux subtracted in 200 components = 0.0106239 Jy ! Clean residual min=-0.009962 max=0.008427 Jy/beam ! Clean residual mean=-0.000092 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 2.25825 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 2.25825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281379Jy sigma=0.657367 ! Fit after self-cal, rms=0.281390Jy sigma=0.657328 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443519 Jy ! Component: 100 - total flux cleaned = 0.000442468 Jy ! Component: 150 - total flux cleaned = 0.000439729 Jy ! Component: 200 - total flux cleaned = 0.000344512 Jy ! Total flux subtracted in 200 components = 0.000344512 Jy ! Clean residual min=-0.009953 max=0.008513 Jy/beam ! Clean residual mean=-0.000096 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 2.2586 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 2.2586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281318Jy sigma=0.656988 ! Fit after self-cal, rms=0.281316Jy sigma=0.656984 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281316Jy sigma=0.656984 ! Fit after self-cal, rms=0.281676Jy sigma=0.656055 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.474 mas, bmaj=8.544 mas, bpa=19.81 degrees ! Estimated noise=5.41862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751535 Jy ! Component: 100 - total flux cleaned = 0.00999604 Jy ! Component: 150 - total flux cleaned = 0.010498 Jy ! Component: 200 - total flux cleaned = 0.0106037 Jy ! Total flux subtracted in 200 components = 0.0106037 Jy ! Clean residual min=-0.009760 max=0.011218 Jy/beam ! Clean residual mean=-0.000423 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 2.2692 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 35 components and 2.2692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281577Jy sigma=0.657052 ! Fit after self-cal, rms=0.281499Jy sigma=0.656770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034618 Jy ! Component: 100 - total flux cleaned = 0.000444153 Jy ! Component: 150 - total flux cleaned = 0.000528806 Jy ! Component: 200 - total flux cleaned = 0.000567094 Jy ! Total flux subtracted in 200 components = 0.000567094 Jy ! Clean residual min=-0.009645 max=0.011200 Jy/beam ! Clean residual mean=-0.000445 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 2.26977 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 2.26977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281516Jy sigma=0.657175 ! Fit after self-cal, rms=0.281496Jy sigma=0.657114 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=3.864 mas, bpa=5.788 degrees ! Estimated noise=3.25453 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.408 x 3.864 at 5.788 degrees (North through East) ! Clean map min=-0.0091566 max=2.081 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281496Jy sigma=0.657114 ! Fit after self-cal, rms=0.275769Jy sigma=0.575562 ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=3.862 mas, bpa=5.786 degrees ! Estimated noise=3.25535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227818 Jy ! Component: 100 - total flux cleaned = 0.0028101 Jy ! Component: 150 - total flux cleaned = 0.00303756 Jy ! Component: 200 - total flux cleaned = 0.0031353 Jy ! Total flux subtracted in 200 components = 0.0031353 Jy ! Clean residual min=-0.009641 max=0.008516 Jy/beam ! Clean residual mean=-0.000110 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 2.2729 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 2.2729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275637Jy sigma=0.574543 ! Fit after self-cal, rms=0.275661Jy sigma=0.574485 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211861 Jy ! Component: 100 - total flux cleaned = -0.000212735 Jy ! Component: 150 - total flux cleaned = -0.000213378 Jy ! Component: 200 - total flux cleaned = -0.000301745 Jy ! Total flux subtracted in 200 components = -0.000301745 Jy ! Clean residual min=-0.009576 max=0.008534 Jy/beam ! Clean residual mean=-0.000107 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 2.2726 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 2.2726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275610Jy sigma=0.573942 ! Fit after self-cal, rms=0.275623Jy sigma=0.573918 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275623Jy sigma=0.573918 ! Fit after self-cal, rms=0.275843Jy sigma=0.573639 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=3.543 mas, bpa=7.047 degrees ! Estimated noise=3.88494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60933 Jy ! Component: 100 - total flux cleaned = 1.97252 Jy ! Component: 150 - total flux cleaned = 2.11005 Jy ! Component: 200 - total flux cleaned = 2.17616 Jy ! Total flux subtracted in 200 components = 2.17616 Jy ! Clean residual min=-0.012477 max=0.030439 Jy/beam ! Clean residual mean=-0.000022 rms=0.002904 Jy/beam ! Combined flux in latest and established models = 2.17616 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.17616 Jy ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=3.862 mas, bpa=5.776 degrees ! Estimated noise=3.25787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043605 Jy ! Component: 100 - total flux cleaned = 0.0662732 Jy ! Component: 150 - total flux cleaned = 0.0796673 Jy ! Component: 200 - total flux cleaned = 0.0878255 Jy ! Total flux subtracted in 200 components = 0.0878255 Jy ! Clean residual min=-0.009322 max=0.008562 Jy/beam ! Clean residual mean=0.000026 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 2.26398 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 2.26398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.47 mas, bmaj=8.535 mas, bpa=19.88 degrees ! Estimated noise=5.4363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107557 Jy ! Component: 100 - total flux cleaned = 0.0138114 Jy ! Component: 150 - total flux cleaned = 0.0141091 Jy ! Component: 200 - total flux cleaned = 0.0142767 Jy ! Total flux subtracted in 200 components = 0.0142767 Jy ! Clean residual min=-0.010375 max=0.010554 Jy/beam ! Clean residual mean=-0.000466 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 2.27826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215954 Jy ! Component: 100 - total flux cleaned = 0.000340455 Jy ! Component: 150 - total flux cleaned = 0.00045345 Jy ! Component: 200 - total flux cleaned = 0.000553919 Jy ! Total flux subtracted in 200 components = 0.000553919 Jy ! Clean residual min=-0.010407 max=0.010502 Jy/beam ! Clean residual mean=-0.000488 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 2.27881 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 2.27881 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=3.862 mas, bpa=5.776 degrees ! Estimated noise=3.25787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000742002 Jy ! Component: 100 - total flux cleaned = -0.00174914 Jy ! Component: 150 - total flux cleaned = -0.00240744 Jy ! Component: 200 - total flux cleaned = -0.00287988 Jy ! Total flux subtracted in 200 components = -0.00287988 Jy ! Clean residual min=-0.009556 max=0.008700 Jy/beam ! Clean residual mean=-0.000105 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 2.27593 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 2.27593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275413Jy sigma=0.569581 ! Fit after self-cal, rms=0.275449Jy sigma=0.569440 wmodel J0646+4451_S_map.mod ! Writing 41 model components to file: J0646+4451_S_map.mod wobs J0646+4451_S_uvs.fits ! Writing UV FITS file: J0646+4451_S_uvs.fits wwins J0646+4451_S_map.win ! wwins: Wrote 1 windows to J0646+4451_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154587 Jy ! Component: 100 - total flux cleaned = -0.0033481 Jy ! Component: 150 - total flux cleaned = -0.00520126 Jy ! Component: 200 - total flux cleaned = -0.00672159 Jy ! Component: 250 - total flux cleaned = -0.00739405 Jy ! Component: 300 - total flux cleaned = -0.00792099 Jy ! Component: 350 - total flux cleaned = -0.00792049 Jy ! Component: 400 - total flux cleaned = -0.00817361 Jy ! Component: 450 - total flux cleaned = -0.00817272 Jy ! Component: 500 - total flux cleaned = -0.00829502 Jy ! Component: 550 - total flux cleaned = -0.00853609 Jy ! Component: 600 - total flux cleaned = -0.00853506 Jy ! Component: 650 - total flux cleaned = -0.00865242 Jy ! Component: 700 - total flux cleaned = -0.00876799 Jy ! Component: 750 - total flux cleaned = -0.00876762 Jy ! Component: 800 - total flux cleaned = -0.00899543 Jy ! Component: 850 - total flux cleaned = -0.00922135 Jy ! Component: 900 - total flux cleaned = -0.00933415 Jy ! Component: 950 - total flux cleaned = -0.00966693 Jy ! Component: 1000 - total flux cleaned = -0.00977691 Jy ! Component: 1050 - total flux cleaned = -0.00999552 Jy ! Component: 1100 - total flux cleaned = -0.0101029 Jy ! Component: 1150 - total flux cleaned = -0.0104237 Jy ! Component: 1200 - total flux cleaned = -0.0105286 Jy ! Component: 1250 - total flux cleaned = -0.0104242 Jy ! Component: 1300 - total flux cleaned = -0.0107378 Jy ! Component: 1350 - total flux cleaned = -0.0108417 Jy ! Component: 1400 - total flux cleaned = -0.0112535 Jy ! Component: 1450 - total flux cleaned = -0.0114576 Jy ! Component: 1500 - total flux cleaned = -0.0115584 Jy ! Component: 1550 - total flux cleaned = -0.0113574 Jy ! Component: 1600 - total flux cleaned = -0.0116595 Jy ! Component: 1650 - total flux cleaned = -0.0120581 Jy ! Component: 1700 - total flux cleaned = -0.0120582 Jy ! Component: 1750 - total flux cleaned = -0.0125485 Jy ! Component: 1800 - total flux cleaned = -0.0127435 Jy ! Component: 1850 - total flux cleaned = -0.0125495 Jy ! Component: 1900 - total flux cleaned = -0.0128388 Jy ! Component: 1950 - total flux cleaned = -0.0129354 Jy ! Component: 2000 - total flux cleaned = -0.0131263 Jy ! Component: 2050 - total flux cleaned = -0.0132207 Jy ! Component: 2100 - total flux cleaned = -0.0135033 Jy ! Component: 2150 - total flux cleaned = -0.0135031 Jy ! Component: 2200 - total flux cleaned = -0.0135964 Jy ! Component: 2250 - total flux cleaned = -0.0135967 Jy ! Component: 2300 - total flux cleaned = -0.0138727 Jy ! Component: 2350 - total flux cleaned = -0.013873 Jy ! Component: 2400 - total flux cleaned = -0.0141458 Jy ! Component: 2450 - total flux cleaned = -0.0142369 Jy ! Component: 2500 - total flux cleaned = -0.0143269 Jy ! Component: 2550 - total flux cleaned = -0.0142368 Jy ! Component: 2600 - total flux cleaned = -0.0142366 Jy ! Component: 2650 - total flux cleaned = -0.0142364 Jy ! Component: 2700 - total flux cleaned = -0.014678 Jy ! Component: 2750 - total flux cleaned = -0.0143261 Jy ! Component: 2800 - total flux cleaned = -0.0143261 Jy ! Component: 2850 - total flux cleaned = -0.0143262 Jy ! Component: 2900 - total flux cleaned = -0.0142397 Jy ! Component: 2950 - total flux cleaned = -0.0143263 Jy ! Component: 3000 - total flux cleaned = -0.0144121 Jy ! Component: 3050 - total flux cleaned = -0.0145827 Jy ! Component: 3100 - total flux cleaned = -0.0143271 Jy ! Component: 3150 - total flux cleaned = -0.0143274 Jy ! Component: 3200 - total flux cleaned = -0.0140743 Jy ! Component: 3250 - total flux cleaned = -0.0139063 Jy ! Component: 3300 - total flux cleaned = -0.0139069 Jy ! Component: 3350 - total flux cleaned = -0.0141569 Jy ! Component: 3400 - total flux cleaned = -0.0140736 Jy ! Component: 3450 - total flux cleaned = -0.0139083 Jy ! Component: 3500 - total flux cleaned = -0.0138261 Jy ! Component: 3550 - total flux cleaned = -0.0135798 Jy ! Component: 3600 - total flux cleaned = -0.0136617 Jy ! Component: 3650 - total flux cleaned = -0.0138246 Jy ! Component: 3700 - total flux cleaned = -0.0136629 Jy ! Component: 3750 - total flux cleaned = -0.0137434 Jy ! Component: 3800 - total flux cleaned = -0.0135824 Jy ! Component: 3850 - total flux cleaned = -0.0135023 Jy ! Component: 3900 - total flux cleaned = -0.0135022 Jy ! Component: 3950 - total flux cleaned = -0.0132637 Jy ! Component: 4000 - total flux cleaned = -0.0133428 Jy ! Component: 4050 - total flux cleaned = -0.0133428 Jy ! Total flux subtracted in 4096 components = -0.0131073 Jy ! Clean residual min=-0.004350 max=0.004340 Jy/beam ! Clean residual mean=0.000031 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 2.26282 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 378 components and 2.26283 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0646+4451_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.406 x 3.862 at 5.776 degrees (North through East) ! Clean map min=-0.007779 max=2.0818 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0646+4451_S_map.fits wmodel /scr/pima/rv102_uvs/J0646+4451_S_map.mod ! Writing 378 model components to file: /scr/pima/rv102_uvs/J0646+4451_S_map.mod wobs /scr/pima/rv102_uvs/J0646+4451_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0646+4451_S_uvs.fits wwins /scr/pima/rv102_uvs/J0646+4451_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv102_uvs/J0646+4451_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.08181 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00137659 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.198374 0.198374 0.396748 0.793497 1.58699 3.17399 6.34797 12.6959 25.3919 50.7838 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.081 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1512.29 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0646+4451_S_dfm.log closed on Sat Nov 9 09:32:13 2019