! Started logfile: /scr/pima/rv102_uvs/J0429+2724_X_uvs.log on Sat Feb 27 22:23:52 2016
obs /scr/pima/rv102_uvs/J0429+2724_X_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J0429+2724_X_uva.fits
! AN table 1: 238 integrations on 10 of 10 possible baselines.
! AN table 2: 119 integrations on 36 of 36 possible baselines.
! AN table 3: 22 integrations on 15 of 15 possible baselines.
! AN table 4: 23 integrations on 1 of 1 possible baselines.
! AN table 5: 80 integrations on 6 of 6 possible baselines.
! AN table 6: 20 integrations on 36 of 36 possible baselines.
! AN table 7: 27 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.580146 visibilities/baseline/integration-bin.
! Found source: J0429+2724
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 20384 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0429+2724_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 398 telescope corrections were flagged in sub-array 1.
!  A total of 566 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 46 telescope corrections were flagged in sub-array 4.
!  A total of 89 telescope corrections were flagged in sub-array 5.
!  A total of 45 telescope corrections were flagged in sub-array 6.
!  A total of 40 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 2.
!  A total of 398 telescope corrections were flagged in sub-array 1.
!  A total of 566 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 46 telescope corrections were flagged in sub-array 4.
!  A total of 89 telescope corrections were flagged in sub-array 5.
!  A total of 45 telescope corrections were flagged in sub-array 6.
!  A total of 40 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 3.
!  A total of 902 telescope corrections were flagged in sub-array 1.
!  A total of 720 telescope corrections were flagged in sub-array 2.
!  A total of 57 telescope corrections were flagged in sub-array 3.
!  A total of 46 telescope corrections were flagged in sub-array 4.
!  A total of 320 telescope corrections were flagged in sub-array 5.
!  A total of 45 telescope corrections were flagged in sub-array 6.
!  A total of 63 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 4.
!  A total of 902 telescope corrections were flagged in sub-array 1.
!  A total of 720 telescope corrections were flagged in sub-array 2.
!  A total of 57 telescope corrections were flagged in sub-array 3.
!  A total of 46 telescope corrections were flagged in sub-array 4.
!  A total of 320 telescope corrections were flagged in sub-array 5.
!  A total of 45 telescope corrections were flagged in sub-array 6.
!  A total of 63 telescope corrections were flagged in sub-array 7.
! 
! Fit before self-cal, rms=1.082747Jy  sigma=13.816525
! Fit after  self-cal, rms=0.716610Jy  sigma=10.211984
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.616 mas, bmaj=1.294 mas, bpa=-4.972 degrees
! Estimated noise=0.952632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.210474 Jy
! Component: 100  -  total flux cleaned = 0.2497 Jy
! Total flux subtracted in 100 components = 0.2497 Jy
! Clean residual min=-0.032713 max=0.050217 Jy/beam
! Clean residual mean=-0.000043 rms=0.008622 Jy/beam
! Combined flux in latest and established models = 0.2497 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.2497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254923Jy  sigma=2.647013
! Fit after  self-cal, rms=0.254799Jy  sigma=2.641482
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7461 mas, bmaj=1.511 mas, bpa=-3.472 degrees
! Estimated noise=0.573142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191891 Jy
! Component: 100  -  total flux cleaned = 0.0159134 Jy
! Component: 150  -  total flux cleaned = 0.0134942 Jy
! Component: 200  -  total flux cleaned = 0.0127081 Jy
! Total flux subtracted in 200 components = 0.0127081 Jy
! Clean residual min=-0.032297 max=0.041835 Jy/beam
! Clean residual mean=-0.000023 rms=0.008805 Jy/beam
! Combined flux in latest and established models = 0.262408 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.262408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.246176Jy  sigma=2.630500
! Fit after  self-cal, rms=0.246014Jy  sigma=2.630015
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7461 x 1.511 at -3.472 degrees (North through East)
! Clean map  min=-0.030517  max=0.29242 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 99 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.00*    LA        1.00*    MA        1.00*    NY        1.00*    
!   ON        1.00*    PT        1.00*    SC        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    NY        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   MK        0.00*    NY        0.00*    
! 
!  A total of 171 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   NY        1.00*    SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NY        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   MA        1.00*    NY        1.00*    ON        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  A total of 99 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.00*    LA        1.00*    MA        1.00*    NY        1.00*    
!   ON        1.00*    PT        1.00*    SC        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    NY        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   MK        0.00*    NY        0.00*    
! 
!  A total of 171 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   NY        1.00*    SC        1.00*    WF        1.00*    WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NY        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 288 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   MA        0.00*    NY        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.00*    LA        1.00*    MA        1.00*    NY        1.00*    
!   ON        1.00*    PT        1.00*    SC        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    NY        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   MK        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   NY        0.00*    SC        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NY        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 288 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   MA        0.00*    NY        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.00*    LA        1.00*    MA        1.00*    NY        1.00*    
!   ON        1.00*    PT        1.00*    SC        1.00*    WF        1.00*    
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    NY        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   MK        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   NY        0.00*    SC        0.00*    WF        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 7:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NY        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.246014Jy  sigma=2.630015
! Fit after  self-cal, rms=0.246472Jy  sigma=2.727235
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7464 mas, bmaj=1.517 mas, bpa=-4.199 degrees
! Estimated noise=0.586063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00244847 Jy
! Component: 100  -  total flux cleaned = -0.00272453 Jy
! Component: 150  -  total flux cleaned = -0.00297024 Jy
! Component: 200  -  total flux cleaned = -0.00297278 Jy
! Total flux subtracted in 200 components = -0.00297278 Jy
! Clean residual min=-0.033970 max=0.041992 Jy/beam
! Clean residual mean=-0.000017 rms=0.009388 Jy/beam
! Combined flux in latest and established models = 0.259436 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.259436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245674Jy  sigma=2.721583
! Fit after  self-cal, rms=0.245659Jy  sigma=2.721429
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245659Jy  sigma=2.721429
! Fit after  self-cal, rms=0.245659Jy  sigma=2.721429
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7464 mas, bmaj=1.517 mas, bpa=-4.199 degrees
! Estimated noise=0.586063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.01763e-05 Jy
! Component: 100  -  total flux cleaned = -0.000215245 Jy
! Component: 150  -  total flux cleaned = -0.000398128 Jy
! Component: 200  -  total flux cleaned = -0.000389462 Jy
! Total flux subtracted in 200 components = -0.000389462 Jy
! Clean residual min=-0.033720 max=0.041186 Jy/beam
! Clean residual mean=-0.000019 rms=0.009359 Jy/beam
! Combined flux in latest and established models = 0.259046 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.259046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245068Jy  sigma=2.720808
! Fit after  self-cal, rms=0.245061Jy  sigma=2.720726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0332246 Jy
! Component: 100  -  total flux cleaned = 0.0371199 Jy
! Component: 150  -  total flux cleaned = 0.0371198 Jy
! Component: 200  -  total flux cleaned = 0.0363316 Jy
! Total flux subtracted in 200 components = 0.0363316 Jy
! Clean residual min=-0.032669 max=0.037519 Jy/beam
! Clean residual mean=-0.000300 rms=0.008809 Jy/beam
! Combined flux in latest and established models = 0.295378 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.295378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239950Jy  sigma=2.638123
! Fit after  self-cal, rms=0.238683Jy  sigma=2.620851
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238683Jy  sigma=2.620851
! Fit after  self-cal, rms=0.236193Jy  sigma=2.617122
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7471 mas, bmaj=1.522 mas, bpa=-4.16 degrees
! Estimated noise=0.582791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114362 Jy
! Component: 100  -  total flux cleaned = 0.0119929 Jy
! Component: 150  -  total flux cleaned = 0.0113108 Jy
! Component: 200  -  total flux cleaned = 0.0107225 Jy
! Total flux subtracted in 200 components = 0.0107225 Jy
! Clean residual min=-0.032723 max=0.036454 Jy/beam
! Clean residual mean=-0.000360 rms=0.008407 Jy/beam
! Combined flux in latest and established models = 0.3061 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.3061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235315Jy  sigma=2.584401
! Fit after  self-cal, rms=0.235098Jy  sigma=2.580760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, 41.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331296 Jy
! Component: 100  -  total flux cleaned = 0.0439095 Jy
! Component: 150  -  total flux cleaned = 0.0502732 Jy
! Component: 200  -  total flux cleaned = 0.0538082 Jy
! Total flux subtracted in 200 components = 0.0538082 Jy
! Clean residual min=-0.029225 max=0.033878 Jy/beam
! Clean residual mean=-0.000347 rms=0.007737 Jy/beam
! Combined flux in latest and established models = 0.359908 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 65 components and 0.359908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.231046Jy  sigma=2.468734
! Fit after  self-cal, rms=0.230572Jy  sigma=2.453899
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230572Jy  sigma=2.453899
! Fit after  self-cal, rms=0.231323Jy  sigma=2.454249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=3.385 mas, bpa=-87.66 degrees
! Estimated noise=0.750887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015151 Jy
! Component: 100  -  total flux cleaned = 0.0124709 Jy
! Component: 150  -  total flux cleaned = 0.0111884 Jy
! Component: 200  -  total flux cleaned = 0.0101251 Jy
! Total flux subtracted in 200 components = 0.0101251 Jy
! Clean residual min=-0.049671 max=0.048124 Jy/beam
! Clean residual mean=-0.000679 rms=0.014093 Jy/beam
! Combined flux in latest and established models = 0.370034 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.370034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230751Jy  sigma=2.429736
! Fit after  self-cal, rms=0.230742Jy  sigma=2.423752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030814 Jy
! Component: 100  -  total flux cleaned = 0.0017694 Jy
! Component: 150  -  total flux cleaned = 0.000953062 Jy
! Component: 200  -  total flux cleaned = 0.000240501 Jy
! Total flux subtracted in 200 components = 0.000240501 Jy
! Clean residual min=-0.048943 max=0.045747 Jy/beam
! Clean residual mean=-0.000615 rms=0.013769 Jy/beam
! Combined flux in latest and established models = 0.370274 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.370274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230521Jy  sigma=2.415957
! Fit after  self-cal, rms=0.230489Jy  sigma=2.414426
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7479 mas, bmaj=1.521 mas, bpa=-4.104 degrees
! Estimated noise=0.581546 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7479 x 1.521 at -4.104 degrees (North through East)
! Clean map  min=-0.027021  max=0.27905 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6185 mas, bmaj=1.302 mas, bpa=-5.509 degrees
! Estimated noise=0.951762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.205067 Jy
! Component: 100  -  total flux cleaned = 0.270746 Jy
! Component: 150  -  total flux cleaned = 0.309821 Jy
! Component: 200  -  total flux cleaned = 0.323049 Jy
! Total flux subtracted in 200 components = 0.323049 Jy
! Clean residual min=-0.035121 max=0.038004 Jy/beam
! Clean residual mean=-0.000081 rms=0.007881 Jy/beam
! Combined flux in latest and established models = 0.323049 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.323049 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7479 mas, bmaj=1.521 mas, bpa=-4.104 degrees
! Estimated noise=0.581546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.6, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394924 Jy
! Component: 100  -  total flux cleaned = 0.0659463 Jy
! Component: 150  -  total flux cleaned = 0.0789431 Jy
! Component: 200  -  total flux cleaned = 0.0848564 Jy
! Total flux subtracted in 200 components = 0.0848564 Jy
! Clean residual min=-0.030062 max=0.030494 Jy/beam
! Clean residual mean=-0.000384 rms=0.007241 Jy/beam
! Combined flux in latest and established models = 0.407906 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 0.407906 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=3.385 mas, bpa=-87.66 degrees
! Estimated noise=0.750887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136895 Jy
! Component: 100  -  total flux cleaned = 0.0168761 Jy
! Component: 150  -  total flux cleaned = 0.019478 Jy
! Component: 200  -  total flux cleaned = 0.0199388 Jy
! Total flux subtracted in 200 components = 0.0199388 Jy
! Clean residual min=-0.050467 max=0.040899 Jy/beam
! Clean residual mean=-0.000846 rms=0.012707 Jy/beam
! Combined flux in latest and established models = 0.427844 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391468 Jy
! Component: 100  -  total flux cleaned = 0.000405275 Jy
! Component: 150  -  total flux cleaned = 0.000415507 Jy
! Component: 200  -  total flux cleaned = 0.000123072 Jy
! Total flux subtracted in 200 components = 0.000123072 Jy
! Clean residual min=-0.049755 max=0.040074 Jy/beam
! Clean residual mean=-0.000833 rms=0.012541 Jy/beam
! Combined flux in latest and established models = 0.427967 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 91 components and 0.427967 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7479 mas, bmaj=1.521 mas, bpa=-4.104 degrees
! Estimated noise=0.581546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318165 Jy
! Component: 100  -  total flux cleaned = 0.00366924 Jy
! Component: 150  -  total flux cleaned = 0.00452498 Jy
! Component: 200  -  total flux cleaned = 0.00567789 Jy
! Total flux subtracted in 200 components = 0.00567789 Jy
! Clean residual min=-0.028642 max=0.028195 Jy/beam
! Clean residual mean=-0.000395 rms=0.006647 Jy/beam
! Combined flux in latest and established models = 0.433645 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.433645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229885Jy  sigma=2.348965
! Fit after  self-cal, rms=0.228647Jy  sigma=2.324462
wmodel /scr/pima/rv102_uvs/J0429+2724_X_map.mod
! Writing 113 model components to file: /scr/pima/rv102_uvs/J0429+2724_X_map.mod
wobs /scr/pima/rv102_uvs/J0429+2724_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J0429+2724_X_uvs.fits
wwins /scr/pima/rv102_uvs/J0429+2724_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J0429+2724_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00422973 Jy
! Component: 100  -  total flux cleaned = -0.00422966 Jy
! Component: 150  -  total flux cleaned = -0.00465722 Jy
! Component: 200  -  total flux cleaned = -0.0042553 Jy
! Component: 250  -  total flux cleaned = -0.00271214 Jy
! Component: 300  -  total flux cleaned = -0.00124489 Jy
! Component: 350  -  total flux cleaned = -0.000536193 Jy
! Component: 400  -  total flux cleaned = 0.000829212 Jy
! Component: 450  -  total flux cleaned = 0.00149811 Jy
! Component: 500  -  total flux cleaned = 0.00214813 Jy
! Component: 550  -  total flux cleaned = 0.00246592 Jy
! Component: 600  -  total flux cleaned = 0.00277875 Jy
! Component: 650  -  total flux cleaned = 0.00367296 Jy
! Component: 700  -  total flux cleaned = 0.00395582 Jy
! Component: 750  -  total flux cleaned = 0.0042298 Jy
! Component: 800  -  total flux cleaned = 0.00449997 Jy
! Component: 850  -  total flux cleaned = 0.00449451 Jy
! Component: 900  -  total flux cleaned = 0.00475389 Jy
! Component: 950  -  total flux cleaned = 0.00449776 Jy
! Component: 1000  -  total flux cleaned = 0.00425056 Jy
! Component: 1050  -  total flux cleaned = 0.00523869 Jy
! Component: 1100  -  total flux cleaned = 0.00523907 Jy
! Component: 1150  -  total flux cleaned = 0.00547696 Jy
! Component: 1200  -  total flux cleaned = 0.00501711 Jy
! Component: 1250  -  total flux cleaned = 0.00502212 Jy
! Component: 1300  -  total flux cleaned = 0.00547098 Jy
! Component: 1350  -  total flux cleaned = 0.00546695 Jy
! Component: 1400  -  total flux cleaned = 0.00546828 Jy
! Component: 1450  -  total flux cleaned = 0.0059003 Jy
! Component: 1500  -  total flux cleaned = 0.00632406 Jy
! Component: 1550  -  total flux cleaned = 0.00611568 Jy
! Component: 1600  -  total flux cleaned = 0.0061149 Jy
! Component: 1650  -  total flux cleaned = 0.00592034 Jy
! Component: 1700  -  total flux cleaned = 0.00651421 Jy
! Component: 1750  -  total flux cleaned = 0.00670708 Jy
! Component: 1800  -  total flux cleaned = 0.00670621 Jy
! Component: 1850  -  total flux cleaned = 0.00651677 Jy
! Component: 1900  -  total flux cleaned = 0.00633249 Jy
! Component: 1950  -  total flux cleaned = 0.00669655 Jy
! Component: 2000  -  total flux cleaned = 0.00687388 Jy
! Component: 2050  -  total flux cleaned = 0.00669409 Jy
! Component: 2100  -  total flux cleaned = 0.00599453 Jy
! Component: 2150  -  total flux cleaned = 0.00651253 Jy
! Component: 2200  -  total flux cleaned = 0.00651433 Jy
! Component: 2250  -  total flux cleaned = 0.00634492 Jy
! Component: 2300  -  total flux cleaned = 0.00584725 Jy
! Component: 2350  -  total flux cleaned = 0.00584783 Jy
! Component: 2400  -  total flux cleaned = 0.00552119 Jy
! Component: 2450  -  total flux cleaned = 0.00536361 Jy
! Component: 2500  -  total flux cleaned = 0.00568126 Jy
! Component: 2550  -  total flux cleaned = 0.00598986 Jy
! Component: 2600  -  total flux cleaned = 0.00629327 Jy
! Component: 2650  -  total flux cleaned = 0.00614042 Jy
! Component: 2700  -  total flux cleaned = 0.0061397 Jy
! Component: 2750  -  total flux cleaned = 0.00584103 Jy
! Component: 2800  -  total flux cleaned = 0.00613062 Jy
! Component: 2850  -  total flux cleaned = 0.00584442 Jy
! Component: 2900  -  total flux cleaned = 0.00570334 Jy
! Component: 2950  -  total flux cleaned = 0.00612757 Jy
! Component: 3000  -  total flux cleaned = 0.00626593 Jy
! Component: 3050  -  total flux cleaned = 0.00599147 Jy
! Component: 3100  -  total flux cleaned = 0.0059916 Jy
! Component: 3150  -  total flux cleaned = 0.00612495 Jy
! Component: 3200  -  total flux cleaned = 0.00612248 Jy
! Component: 3250  -  total flux cleaned = 0.0053388 Jy
! Component: 3300  -  total flux cleaned = 0.00546842 Jy
! Component: 3350  -  total flux cleaned = 0.00508404 Jy
! Component: 3400  -  total flux cleaned = 0.00508718 Jy
! Component: 3450  -  total flux cleaned = 0.00483836 Jy
! Component: 3500  -  total flux cleaned = 0.0045917 Jy
! Component: 3550  -  total flux cleaned = 0.00410183 Jy
! Component: 3600  -  total flux cleaned = 0.00373873 Jy
! Component: 3650  -  total flux cleaned = 0.00373877 Jy
! Component: 3700  -  total flux cleaned = 0.00350146 Jy
! Component: 3750  -  total flux cleaned = 0.0029158 Jy
! Component: 3800  -  total flux cleaned = 0.00280078 Jy
! Component: 3850  -  total flux cleaned = 0.00268653 Jy
! Component: 3900  -  total flux cleaned = 0.00234652 Jy
! Component: 3950  -  total flux cleaned = 0.00223359 Jy
! Component: 4000  -  total flux cleaned = 0.00189984 Jy
! Component: 4050  -  total flux cleaned = 0.00146049 Jy
! Total flux subtracted in 4096 components = 0.00135023 Jy
! Clean residual min=-0.006255 max=0.006390 Jy/beam
! Clean residual mean=-0.000202 rms=0.001973 Jy/beam
! Combined flux in latest and established models = 0.434996 Jy
keep
! Adding 372 model components to the UV plane model.
! The established model now contains 485 components and 0.434996 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J0429+2724_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7479 x 1.521 at -4.104 degrees (North through East)
! Clean map  min=-0.018321  max=0.25775 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0429+2724_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.257755 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00194666 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.26571 2.26571 4.53143 9.06286 18.1257 36.2514 72.5028
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0058 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.257 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  132.408 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J0429+2724_X_uvs.log closed on Sat Feb 27 22:23:56 2016