! Started logfile: /scr/pima/rv102_uvs/J0339-0146_X_uvs.log on Sat Feb 27 22:23:40 2016 obs /scr/pima/rv102_uvs/J0339-0146_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0339-0146_X_uva.fits ! AN table 1: 22 integrations on 6 of 6 possible baselines. ! AN table 2: 44 integrations on 3 of 3 possible baselines. ! AN table 3: 11 integrations on 10 of 10 possible baselines. ! AN table 4: 11 integrations on 10 of 10 possible baselines. ! AN table 5: 22 integrations on 21 of 21 possible baselines. ! AN table 6: 11 integrations on 6 of 6 possible baselines. ! AN table 7: 11 integrations on 15 of 15 possible baselines. ! AN table 8: 11 integrations on 6 of 6 possible baselines. ! AN table 9: 9 integrations on 1 of 1 possible baselines. ! AN table 10: 11 integrations on 6 of 6 possible baselines. ! AN table 11: 9 integrations on 1 of 1 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 9 integrations on 36 of 36 possible baselines. ! AN table 14: 9 integrations on 28 of 28 possible baselines. ! AN table 15: 9 integrations on 3 of 3 possible baselines. ! AN table 16: 9 integrations on 15 of 15 possible baselines. ! AN table 17: 10 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.773073 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 6500 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0339-0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 18 telescope corrections were flagged in sub-array 13. ! A total of 16 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 20 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 18 telescope corrections were flagged in sub-array 13. ! A total of 16 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 20 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 108 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 18 telescope corrections were flagged in sub-array 13. ! A total of 16 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 20 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 132 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 3. ! A total of 55 telescope corrections were flagged in sub-array 4. ! A total of 108 telescope corrections were flagged in sub-array 5. ! A total of 26 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 18 telescope corrections were flagged in sub-array 13. ! A total of 16 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 20 telescope corrections were flagged in sub-array 17. ! ! Fit before self-cal, rms=1.577821Jy sigma=15.585480 ! Fit after self-cal, rms=0.748940Jy sigma=9.316773 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6265 mas, bmaj=1.755 mas, bpa=-12.75 degrees ! Estimated noise=1.56152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.536192 Jy ! Component: 100 - total flux cleaned = 0.760229 Jy ! Total flux subtracted in 100 components = 0.760229 Jy ! Clean residual min=-0.118188 max=0.185025 Jy/beam ! Clean residual mean=0.001743 rms=0.029239 Jy/beam ! Combined flux in latest and established models = 0.760229 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.760229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.750009Jy sigma=7.691894 ! Fit after self-cal, rms=0.746701Jy sigma=7.663616 ! Inverting map ! Added new window around map position (4.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184279 Jy ! Component: 100 - total flux cleaned = 0.301548 Jy ! Total flux subtracted in 100 components = 0.301548 Jy ! Clean residual min=-0.106349 max=0.185861 Jy/beam ! Clean residual mean=0.001313 rms=0.026671 Jy/beam ! Combined flux in latest and established models = 1.06178 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 1.06178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.652846Jy sigma=7.135334 ! Fit after self-cal, rms=0.640853Jy sigma=7.034757 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7622 mas, bmaj=2.089 mas, bpa=-11.01 degrees ! Estimated noise=1.23004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164619 Jy ! Component: 100 - total flux cleaned = 0.254211 Jy ! Component: 150 - total flux cleaned = 0.290339 Jy ! Component: 200 - total flux cleaned = 0.303176 Jy ! Total flux subtracted in 200 components = 0.303176 Jy ! Clean residual min=-0.114902 max=0.176889 Jy/beam ! Clean residual mean=0.010100 rms=0.038014 Jy/beam ! Combined flux in latest and established models = 1.36495 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 1.36495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575720Jy sigma=6.673874 ! Fit after self-cal, rms=0.564825Jy sigma=6.588160 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7622 x 2.089 at -11.01 degrees (North through East) ! Clean map min=-0.11086 max=0.68778 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* SC 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* SC 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* SC 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* SC 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.564825Jy sigma=6.588160 ! Fit after self-cal, rms=0.578901Jy sigma=7.167837 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7797 mas, bmaj=2.103 mas, bpa=-9.284 degrees ! Estimated noise=1.28934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375522 Jy ! Component: 100 - total flux cleaned = 0.0452947 Jy ! Component: 150 - total flux cleaned = 0.0472152 Jy ! Component: 200 - total flux cleaned = 0.0488424 Jy ! Total flux subtracted in 200 components = 0.0488424 Jy ! Clean residual min=-0.125733 max=0.166408 Jy/beam ! Clean residual mean=0.008761 rms=0.040284 Jy/beam ! Combined flux in latest and established models = 1.41379 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 1.41379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565499Jy sigma=6.781644 ! Fit after self-cal, rms=0.561001Jy sigma=6.743124 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561001Jy sigma=6.743124 ! Fit after self-cal, rms=0.559718Jy sigma=6.738030 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7781 mas, bmaj=2.103 mas, bpa=-9.307 degrees ! Estimated noise=1.28412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018023 Jy ! Component: 100 - total flux cleaned = 0.0210322 Jy ! Component: 150 - total flux cleaned = 0.0223184 Jy ! Component: 200 - total flux cleaned = 0.0223479 Jy ! Total flux subtracted in 200 components = 0.0223479 Jy ! Clean residual min=-0.128313 max=0.156517 Jy/beam ! Clean residual mean=0.007960 rms=0.039010 Jy/beam ! Combined flux in latest and established models = 1.43614 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 1.43614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554388Jy sigma=6.612721 ! Fit after self-cal, rms=0.553366Jy sigma=6.602353 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722424 Jy ! Component: 100 - total flux cleaned = 0.00842773 Jy ! Component: 150 - total flux cleaned = 0.00945924 Jy ! Component: 200 - total flux cleaned = 0.00942471 Jy ! Total flux subtracted in 200 components = 0.00942471 Jy ! Clean residual min=-0.129176 max=0.157438 Jy/beam ! Clean residual mean=0.007824 rms=0.038553 Jy/beam ! Combined flux in latest and established models = 1.44557 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 1.44557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550485Jy sigma=6.541174 ! Fit after self-cal, rms=0.550233Jy sigma=6.537353 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550233Jy sigma=6.537353 ! Fit after self-cal, rms=0.550197Jy sigma=6.536812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7783 mas, bmaj=2.103 mas, bpa=-9.318 degrees ! Estimated noise=1.28493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245822 Jy ! Component: 100 - total flux cleaned = 0.00242407 Jy ! Component: 150 - total flux cleaned = 0.00324711 Jy ! Component: 200 - total flux cleaned = 0.0048031 Jy ! Total flux subtracted in 200 components = 0.0048031 Jy ! Clean residual min=-0.129776 max=0.157407 Jy/beam ! Clean residual mean=0.007822 rms=0.038317 Jy/beam ! Combined flux in latest and established models = 1.45037 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 1.45037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.548324Jy sigma=6.499261 ! Fit after self-cal, rms=0.548254Jy sigma=6.497256 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.40661e-05 Jy ! Component: 100 - total flux cleaned = 0.000649963 Jy ! Component: 150 - total flux cleaned = 0.00207457 Jy ! Component: 200 - total flux cleaned = 0.00277082 Jy ! Total flux subtracted in 200 components = 0.00277082 Jy ! Clean residual min=-0.129450 max=0.157318 Jy/beam ! Clean residual mean=0.007783 rms=0.038132 Jy/beam ! Combined flux in latest and established models = 1.45314 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 1.45314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.547108Jy sigma=6.470305 ! Fit after self-cal, rms=0.547060Jy sigma=6.469134 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.547060Jy sigma=6.469134 ! Fit after self-cal, rms=0.547044Jy sigma=6.468914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.333 mas, bmaj=3.905 mas, bpa=-6.922 degrees ! Estimated noise=1.75619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228151 Jy ! Component: 100 - total flux cleaned = 0.0252682 Jy ! Component: 150 - total flux cleaned = 0.0270227 Jy ! Component: 200 - total flux cleaned = 0.0269962 Jy ! Total flux subtracted in 200 components = 0.0269962 Jy ! Clean residual min=-0.195390 max=0.282920 Jy/beam ! Clean residual mean=0.016582 rms=0.071861 Jy/beam ! Combined flux in latest and established models = 1.48014 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 54 components and 1.48014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.556231Jy sigma=6.497648 ! Fit after self-cal, rms=0.553318Jy sigma=6.478243 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323613 Jy ! Component: 100 - total flux cleaned = 0.00463753 Jy ! Component: 150 - total flux cleaned = 0.00689263 Jy ! Component: 200 - total flux cleaned = 0.00788839 Jy ! Total flux subtracted in 200 components = 0.00788839 Jy ! Clean residual min=-0.194490 max=0.281564 Jy/beam ! Clean residual mean=0.016324 rms=0.070689 Jy/beam ! Combined flux in latest and established models = 1.48803 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 1.48803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562531Jy sigma=6.545699 ! Fit after self-cal, rms=0.562065Jy sigma=6.539597 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7783 mas, bmaj=2.104 mas, bpa=-9.308 degrees ! Estimated noise=1.28516 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7783 x 2.104 at -9.308 degrees (North through East) ! Clean map min=-0.12658 max=0.64243 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562065Jy sigma=6.539597 ! Fit after self-cal, rms=0.562047Jy sigma=6.538511 ! Inverting map and beam ! Estimated beam: bmin=0.7782 mas, bmaj=2.104 mas, bpa=-9.319 degrees ! Estimated noise=1.28543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0231835 Jy ! Component: 100 - total flux cleaned = -0.0213923 Jy ! Component: 150 - total flux cleaned = -0.0215006 Jy ! Component: 200 - total flux cleaned = -0.0189678 Jy ! Total flux subtracted in 200 components = -0.0189678 Jy ! Clean residual min=-0.128084 max=0.156946 Jy/beam ! Clean residual mean=0.007671 rms=0.037104 Jy/beam ! Combined flux in latest and established models = 1.46906 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 1.46906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549518Jy sigma=6.401983 ! Fit after self-cal, rms=0.548509Jy sigma=6.394445 ! Inverting map ! Added new window around map position (-19, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16006 Jy ! Component: 100 - total flux cleaned = 0.246776 Jy ! Component: 150 - total flux cleaned = 0.261509 Jy ! Component: 200 - total flux cleaned = 0.265387 Jy ! Total flux subtracted in 200 components = 0.265387 Jy ! Clean residual min=-0.117157 max=0.136183 Jy/beam ! Clean residual mean=0.005376 rms=0.031483 Jy/beam ! Combined flux in latest and established models = 1.73445 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 105 components and 1.73445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508013Jy sigma=5.621698 ! Fit after self-cal, rms=0.497311Jy sigma=5.544594 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.497311Jy sigma=5.544594 ! Fit after self-cal, rms=0.496995Jy sigma=5.543559 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6458 mas, bmaj=1.765 mas, bpa=-10.33 degrees ! Estimated noise=1.64181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.501952 Jy ! Component: 100 - total flux cleaned = 0.785127 Jy ! Component: 150 - total flux cleaned = 0.97945 Jy ! Component: 200 - total flux cleaned = 1.13125 Jy ! Total flux subtracted in 200 components = 1.13125 Jy ! Clean residual min=-0.114960 max=0.137243 Jy/beam ! Clean residual mean=0.001727 rms=0.026144 Jy/beam ! Combined flux in latest and established models = 1.13125 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.13125 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7778 mas, bmaj=2.103 mas, bpa=-9.333 degrees ! Estimated noise=1.28503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206073 Jy ! Component: 100 - total flux cleaned = 0.34975 Jy ! Component: 150 - total flux cleaned = 0.464726 Jy ! Component: 200 - total flux cleaned = 0.55871 Jy ! Total flux subtracted in 200 components = 0.55871 Jy ! Clean residual min=-0.112249 max=0.121232 Jy/beam ! Clean residual mean=0.005795 rms=0.030835 Jy/beam ! Combined flux in latest and established models = 1.68996 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 58 components and 1.68996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.332 mas, bmaj=3.904 mas, bpa=-6.925 degrees ! Estimated noise=1.75697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144654 Jy ! Component: 100 - total flux cleaned = 0.207213 Jy ! Component: 150 - total flux cleaned = 0.244715 Jy ! Component: 200 - total flux cleaned = 0.276912 Jy ! Total flux subtracted in 200 components = 0.276912 Jy ! Clean residual min=-0.171180 max=0.190203 Jy/beam ! Clean residual mean=0.004799 rms=0.051244 Jy/beam ! Combined flux in latest and established models = 1.96688 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229514 Jy ! Component: 100 - total flux cleaned = 0.0432655 Jy ! Component: 150 - total flux cleaned = 0.0594267 Jy ! Component: 200 - total flux cleaned = 0.0722132 Jy ! Total flux subtracted in 200 components = 0.0722132 Jy ! Clean residual min=-0.164993 max=0.186855 Jy/beam ! Clean residual mean=0.002903 rms=0.049543 Jy/beam ! Combined flux in latest and established models = 2.03909 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 94 components and 2.03909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7778 mas, bmaj=2.103 mas, bpa=-9.333 degrees ! Estimated noise=1.28503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00207159 Jy ! Component: 100 - total flux cleaned = 0.0145036 Jy ! Component: 150 - total flux cleaned = 0.0239163 Jy ! Component: 200 - total flux cleaned = 0.0253482 Jy ! Total flux subtracted in 200 components = 0.0253482 Jy ! Clean residual min=-0.100618 max=0.109855 Jy/beam ! Clean residual mean=0.000753 rms=0.026417 Jy/beam ! Combined flux in latest and established models = 2.06444 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 2.06444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491542Jy sigma=5.027509 ! Fit after self-cal, rms=0.472395Jy sigma=4.857331 wmodel /scr/pima/rv102_uvs/J0339-0146_X_map.mod ! Writing 112 model components to file: /scr/pima/rv102_uvs/J0339-0146_X_map.mod wobs /scr/pima/rv102_uvs/J0339-0146_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0339-0146_X_uvs.fits wwins /scr/pima/rv102_uvs/J0339-0146_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J0339-0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0246629 Jy ! Component: 100 - total flux cleaned = -0.0263499 Jy ! Component: 150 - total flux cleaned = -0.0217558 Jy ! Component: 200 - total flux cleaned = -0.0173773 Jy ! Component: 250 - total flux cleaned = -0.0146248 Jy ! Component: 300 - total flux cleaned = -0.0092659 Jy ! Component: 350 - total flux cleaned = -0.00153855 Jy ! Component: 400 - total flux cleaned = 0.00715975 Jy ! Component: 450 - total flux cleaned = 0.0155601 Jy ! Component: 500 - total flux cleaned = 0.0248798 Jy ! Component: 550 - total flux cleaned = 0.033954 Jy ! Component: 600 - total flux cleaned = 0.044964 Jy ! Component: 650 - total flux cleaned = 0.0524496 Jy ! Component: 700 - total flux cleaned = 0.0608169 Jy ! Component: 750 - total flux cleaned = 0.0679654 Jy ! Component: 800 - total flux cleaned = 0.0739487 Jy ! Component: 850 - total flux cleaned = 0.0788193 Jy ! Component: 900 - total flux cleaned = 0.0845137 Jy ! Component: 950 - total flux cleaned = 0.0873001 Jy ! Component: 1000 - total flux cleaned = 0.0909478 Jy ! Component: 1050 - total flux cleaned = 0.0945264 Jy ! Component: 1100 - total flux cleaned = 0.0988985 Jy ! Component: 1150 - total flux cleaned = 0.10146 Jy ! Component: 1200 - total flux cleaned = 0.103138 Jy ! Component: 1250 - total flux cleaned = 0.106459 Jy ! Component: 1300 - total flux cleaned = 0.10969 Jy ! Component: 1350 - total flux cleaned = 0.112874 Jy ! Component: 1400 - total flux cleaned = 0.116789 Jy ! Component: 1450 - total flux cleaned = 0.11986 Jy ! Component: 1500 - total flux cleaned = 0.122883 Jy ! Component: 1550 - total flux cleaned = 0.12585 Jy ! Component: 1600 - total flux cleaned = 0.128036 Jy ! Component: 1650 - total flux cleaned = 0.130192 Jy ! Component: 1700 - total flux cleaned = 0.132316 Jy ! Component: 1750 - total flux cleaned = 0.134398 Jy ! Component: 1800 - total flux cleaned = 0.136446 Jy ! Component: 1850 - total flux cleaned = 0.137133 Jy ! Component: 1900 - total flux cleaned = 0.139785 Jy ! Component: 1950 - total flux cleaned = 0.142392 Jy ! Component: 2000 - total flux cleaned = 0.143681 Jy ! Component: 2050 - total flux cleaned = 0.144943 Jy ! Component: 2100 - total flux cleaned = 0.145573 Jy ! Component: 2150 - total flux cleaned = 0.148039 Jy ! Component: 2200 - total flux cleaned = 0.14924 Jy ! Component: 2250 - total flux cleaned = 0.151019 Jy ! Component: 2300 - total flux cleaned = 0.15102 Jy ! Component: 2350 - total flux cleaned = 0.152191 Jy ! Component: 2400 - total flux cleaned = 0.153336 Jy ! Component: 2450 - total flux cleaned = 0.155025 Jy ! Component: 2500 - total flux cleaned = 0.155024 Jy ! Component: 2550 - total flux cleaned = 0.155585 Jy ! Component: 2600 - total flux cleaned = 0.156671 Jy ! Component: 2650 - total flux cleaned = 0.157736 Jy ! Component: 2700 - total flux cleaned = 0.158264 Jy ! Component: 2750 - total flux cleaned = 0.15879 Jy ! Component: 2800 - total flux cleaned = 0.160335 Jy ! Component: 2850 - total flux cleaned = 0.162372 Jy ! Component: 2900 - total flux cleaned = 0.16288 Jy ! Component: 2950 - total flux cleaned = 0.164373 Jy ! Component: 3000 - total flux cleaned = 0.165843 Jy ! Component: 3050 - total flux cleaned = 0.166814 Jy ! Component: 3100 - total flux cleaned = 0.168254 Jy ! Component: 3150 - total flux cleaned = 0.168727 Jy ! Component: 3200 - total flux cleaned = 0.170603 Jy ! Component: 3250 - total flux cleaned = 0.171066 Jy ! Component: 3300 - total flux cleaned = 0.172444 Jy ! Component: 3350 - total flux cleaned = 0.173809 Jy ! Component: 3400 - total flux cleaned = 0.175155 Jy ! Component: 3450 - total flux cleaned = 0.175601 Jy ! Component: 3500 - total flux cleaned = 0.177361 Jy ! Component: 3550 - total flux cleaned = 0.178224 Jy ! Component: 3600 - total flux cleaned = 0.179515 Jy ! Component: 3650 - total flux cleaned = 0.180786 Jy ! Component: 3700 - total flux cleaned = 0.182047 Jy ! Component: 3750 - total flux cleaned = 0.182877 Jy ! Component: 3800 - total flux cleaned = 0.182878 Jy ! Component: 3850 - total flux cleaned = 0.184918 Jy ! Component: 3900 - total flux cleaned = 0.186531 Jy ! Component: 3950 - total flux cleaned = 0.18773 Jy ! Component: 4000 - total flux cleaned = 0.189709 Jy ! Component: 4050 - total flux cleaned = 0.191272 Jy ! Total flux subtracted in 4096 components = 0.191663 Jy ! Clean residual min=-0.026996 max=0.025202 Jy/beam ! Clean residual mean=0.000136 rms=0.007633 Jy/beam ! Combined flux in latest and established models = 2.2561 Jy keep ! Adding 418 model components to the UV plane model. ! The established model now contains 530 components and 2.2561 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0339-0146_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7778 x 2.103 at -9.333 degrees (North through East) ! Clean map min=-0.078483 max=0.55969 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0339-0146_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.559687 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00753345 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.03803 4.03803 8.07607 16.1521 32.3043 64.6085 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0226 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.559 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 74.293 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0339-0146_X_uvs.log closed on Sat Feb 27 22:23:44 2016