! Started logfile: /scr/pima/rv102_uvs/J0339-0146_X_dfm.log on Sat Nov 9 10:16:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/rv102_uvs/J0339-0146_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0339-0146_X_uva.fits ! AN table 1: 11 integrations on 6 of 6 possible baselines. ! AN table 2: 11 integrations on 3 of 3 possible baselines. ! AN table 3: 44 integrations on 3 of 3 possible baselines. ! AN table 4: 11 integrations on 10 of 10 possible baselines. ! AN table 5: 11 integrations on 10 of 10 possible baselines. ! AN table 6: 22 integrations on 21 of 21 possible baselines. ! AN table 7: 11 integrations on 10 of 10 possible baselines. ! AN table 8: 11 integrations on 15 of 15 possible baselines. ! AN table 9: 11 integrations on 6 of 6 possible baselines. ! AN table 10: 18 integrations on 3 of 3 possible baselines. ! AN table 11: 11 integrations on 6 of 6 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 9 integrations on 28 of 28 possible baselines. ! AN table 14: 9 integrations on 21 of 21 possible baselines. ! AN table 15: 9 integrations on 3 of 3 possible baselines. ! AN table 16: 9 integrations on 15 of 15 possible baselines. ! AN table 17: 20 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.926877 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7504 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0339-0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 51 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 38 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 17 telescope corrections were flagged in sub-array 8. ! A total of 13 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 13 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 14 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 40 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 51 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 38 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 17 telescope corrections were flagged in sub-array 8. ! A total of 13 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 13 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 14 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 40 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 51 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 17 telescope corrections were flagged in sub-array 8. ! A total of 13 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 13 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 14 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 40 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 51 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 17 telescope corrections were flagged in sub-array 8. ! A total of 13 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 13 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 14 telescope corrections were flagged in sub-array 14. ! A total of 6 telescope corrections were flagged in sub-array 15. ! A total of 16 telescope corrections were flagged in sub-array 16. ! A total of 40 telescope corrections were flagged in sub-array 17. ! ! Fit before self-cal, rms=1.819007Jy sigma=18.277258 ! Fit after self-cal, rms=0.806711Jy sigma=7.790753 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5665 mas, bmaj=1.855 mas, bpa=-14.76 degrees ! Estimated noise=1.18987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.883063 Jy ! Component: 100 - total flux cleaned = 1.27868 Jy ! Total flux subtracted in 100 components = 1.27868 Jy ! Clean residual min=-0.093598 max=0.186191 Jy/beam ! Clean residual mean=0.001372 rms=0.015707 Jy/beam ! Combined flux in latest and established models = 1.27868 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.27868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578423Jy sigma=5.216079 ! Fit after self-cal, rms=0.571982Jy sigma=5.163651 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218536 Jy ! Component: 100 - total flux cleaned = 0.340867 Jy ! Total flux subtracted in 100 components = 0.340867 Jy ! Clean residual min=-0.048229 max=0.103823 Jy/beam ! Clean residual mean=0.001050 rms=0.009796 Jy/beam ! Combined flux in latest and established models = 1.61954 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 1.61954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.407084Jy sigma=3.560867 ! Fit after self-cal, rms=0.405110Jy sigma=3.545353 ! Inverting map ! Added new window around map position (3.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104285 Jy ! Component: 100 - total flux cleaned = 0.170044 Jy ! Total flux subtracted in 100 components = 0.170044 Jy ! Clean residual min=-0.031480 max=0.064951 Jy/beam ! Clean residual mean=0.000879 rms=0.007660 Jy/beam ! Combined flux in latest and established models = 1.78959 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 1.78959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345739Jy sigma=2.953034 ! Fit after self-cal, rms=0.339708Jy sigma=2.903177 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608881 Jy ! Component: 100 - total flux cleaned = 0.103748 Jy ! Total flux subtracted in 100 components = 0.103748 Jy ! Clean residual min=-0.028655 max=0.048857 Jy/beam ! Clean residual mean=0.000774 rms=0.006336 Jy/beam ! Combined flux in latest and established models = 1.89334 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 1.89334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311102Jy sigma=2.622028 ! Fit after self-cal, rms=0.308460Jy sigma=2.603356 ! Inverting map ! Added new window around map position (-4.4, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453459 Jy ! Component: 100 - total flux cleaned = 0.0797868 Jy ! Total flux subtracted in 100 components = 0.0797868 Jy ! Clean residual min=-0.023833 max=0.036285 Jy/beam ! Clean residual mean=0.000691 rms=0.005516 Jy/beam ! Combined flux in latest and established models = 1.97312 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 1.97312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289732Jy sigma=2.427784 ! Fit after self-cal, rms=0.289172Jy sigma=2.424334 ! Inverting map ! Added new window around map position (1, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352304 Jy ! Component: 100 - total flux cleaned = 0.0613174 Jy ! Total flux subtracted in 100 components = 0.0613174 Jy ! Clean residual min=-0.022640 max=0.027639 Jy/beam ! Clean residual mean=0.000631 rms=0.005063 Jy/beam ! Combined flux in latest and established models = 2.03444 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 2.03444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276967Jy sigma=2.318470 ! Fit after self-cal, rms=0.276725Jy sigma=2.315621 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6469 mas, bmaj=2.065 mas, bpa=-13.49 degrees ! Estimated noise=0.99018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594877 Jy ! Component: 100 - total flux cleaned = 0.102775 Jy ! Component: 150 - total flux cleaned = 0.137278 Jy ! Component: 200 - total flux cleaned = 0.165402 Jy ! Total flux subtracted in 200 components = 0.165402 Jy ! Clean residual min=-0.018972 max=0.031196 Jy/beam ! Clean residual mean=0.007056 rms=0.006221 Jy/beam ! Combined flux in latest and established models = 2.19984 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 104 components and 2.19984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252278Jy sigma=2.126891 ! Fit after self-cal, rms=0.251240Jy sigma=2.118796 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6469 x 2.065 at -13.49 degrees (North through East) ! Clean map min=-0.017242 max=1.1202 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.05 NY 1.15 ON 1.06 WZ 0.95 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.99 NY 1.03 ON 0.99 SC 1.06 ! WZ 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! MA 0.98 NY 1.03 ON 1.00 WF 1.04 ! WZ 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.93 MA 0.95 NY 1.05 ON 1.00 ! SC 1.10 WF 0.87 WZ 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.99 ON 1.02 SC 1.00 WF 0.89 ! WZ 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.02 MA 1.02 ON 1.00 SC 1.01 ! WF 0.84 WZ 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.06 MA 0.99 ON 1.03 WZ 0.95 ! ! A total of 39 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00 ON 0.99 WF 1.10 WZ 0.97 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.98 HN 1.04 KP 1.01 LA 0.99 ! MK 1.08 PT 0.97 SC 1.07 WF 0.88 ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.97 HN 0.94 KP 0.98 LA 0.99 ! PT 1.00 SC 1.08 WF 0.91 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.00 KP 0.99 LA 1.06 MK 0.98 ! OV 1.00* PT 1.04 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 1.08 NY 1.15 ON 1.06 WZ 0.94 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.97 NY 1.07 ON 0.99 SC 1.02 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! MA 0.95 NY 1.03 ON 1.04 WF 1.08 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.95 MA 0.96 NY 1.05 ON 0.99 ! SC 1.07 WF 0.87 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.95 ON 0.93 SC 0.94 WF 0.98 ! WZ 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.98 MA 0.94 ON 0.99 SC 1.06 ! WF 0.89 WZ 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.10 MA 0.92 ON 0.94 WZ 1.08 ! ! A total of 39 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.98 ON 1.13 WF 1.11 WZ 0.97 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.97 HN 1.03 KP 0.98 LA 0.99 ! MK 1.02 PT 0.98 SC 1.07 WF 0.90 ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.97 HN 0.90 KP 0.98 LA 0.97 ! PT 0.99 SC 1.08 WF 0.93 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.02 KP 0.97 LA 1.03 MK 0.98 ! OV 1.00* PT 1.05 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.97 NY 1.00* ON 0.98 SC 1.01 ! WZ 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 0.98 NY 1.00* ON 1.01 WF 0.83 ! WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.94 MA 1.03 NY 1.00* ON 0.98 ! SC 1.05 WF 0.88 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! MA 1.00 ON 1.00 SC 0.98 WF 0.87 ! WZ 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.01 MA 1.04 ON 1.01 SC 1.04 ! WF 0.84 WZ 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.91 MA 1.22 ON 1.00 WZ 0.94 ! ! A total of 39 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.13 ON 1.07 WF 0.92 WZ 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.98 HN 1.01 KP 0.99 LA 1.01 ! MK 1.05 PT 0.98 SC 1.06 WF 0.87 ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.96 HN 0.89 KP 0.98 LA 0.99 ! PT 1.01 SC 1.07 WF 0.90 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.01 KP 1.01 LA 1.04 MK 0.98 ! OV 1.00* PT 1.02 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 1.09 NY 1.00* ON 1.02 SC 0.95 ! WZ 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.01 NY 1.00* ON 1.06 WF 0.93 ! WZ 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.95 MA 1.07 NY 1.00* ON 1.02 ! SC 1.00 WF 0.86 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! MA 1.07 ON 1.01 SC 0.93 WF 0.89 ! WZ 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.94 MA 1.09 ON 1.04 SC 1.05 ! WF 0.90 WZ 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.07 MA 1.16 ON 1.09 WZ 0.95 ! ! A total of 39 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* SC 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.25 ON 1.08 WF 0.90 WZ 0.97 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.99 HN 1.07 KP 1.00 LA 0.99 ! MK 1.01 PT 0.99 SC 1.02 WF 0.88 ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.98 HN 0.88 KP 0.99 LA 0.99 ! PT 0.99 SC 1.06 WF 0.90 ! ! A total of 21 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 0.97 KP 1.01 LA 1.03 MK 0.99 ! OV 1.00* PT 1.02 ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.251240Jy sigma=2.118796 ! Fit after self-cal, rms=0.202535Jy sigma=1.815620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6148 mas, bmaj=2.052 mas, bpa=-13.05 degrees ! Estimated noise=1.05561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657222 Jy ! Component: 100 - total flux cleaned = 0.0126374 Jy ! Component: 150 - total flux cleaned = 0.0149384 Jy ! Component: 200 - total flux cleaned = 0.0163492 Jy ! Total flux subtracted in 200 components = 0.0163492 Jy ! Clean residual min=-0.007837 max=0.013315 Jy/beam ! Clean residual mean=0.001140 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 2.21619 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 2.21619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200895Jy sigma=1.799628 ! Fit after self-cal, rms=0.200723Jy sigma=1.797409 ! Inverting map ! Added new window around map position (0.4, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116096 Jy ! Component: 100 - total flux cleaned = 0.016777 Jy ! Component: 150 - total flux cleaned = 0.0181534 Jy ! Component: 200 - total flux cleaned = 0.0191521 Jy ! Total flux subtracted in 200 components = 0.0191521 Jy ! Clean residual min=-0.007495 max=0.011975 Jy/beam ! Clean residual mean=0.000879 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 2.23534 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 2.23534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199410Jy sigma=1.787019 ! Fit after self-cal, rms=0.199250Jy sigma=1.785985 ! Inverting map ! Added new window around map position (0.4, 16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903874 Jy ! Component: 100 - total flux cleaned = 0.0145686 Jy ! Component: 150 - total flux cleaned = 0.0167676 Jy ! Component: 200 - total flux cleaned = 0.0176556 Jy ! Total flux subtracted in 200 components = 0.0176556 Jy ! Clean residual min=-0.007794 max=0.010332 Jy/beam ! Clean residual mean=0.000641 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 2.253 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 2.253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198280Jy sigma=1.778121 ! Fit after self-cal, rms=0.198155Jy sigma=1.777566 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198155Jy sigma=1.777566 ! Fit after self-cal, rms=0.197054Jy sigma=1.773958 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6142 mas, bmaj=2.053 mas, bpa=-13.01 degrees ! Estimated noise=1.05453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463135 Jy ! Component: 100 - total flux cleaned = 0.00686359 Jy ! Component: 150 - total flux cleaned = 0.00843634 Jy ! Component: 200 - total flux cleaned = 0.00946316 Jy ! Total flux subtracted in 200 components = 0.00946316 Jy ! Clean residual min=-0.006988 max=0.009280 Jy/beam ! Clean residual mean=0.000532 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 2.26246 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 2.26246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196475Jy sigma=1.768014 ! Fit after self-cal, rms=0.196392Jy sigma=1.767747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.2, -12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046446 Jy ! Component: 100 - total flux cleaned = 0.00567098 Jy ! Component: 150 - total flux cleaned = 0.00641683 Jy ! Component: 200 - total flux cleaned = 0.00677415 Jy ! Total flux subtracted in 200 components = 0.00677415 Jy ! Clean residual min=-0.007111 max=0.008787 Jy/beam ! Clean residual mean=0.000458 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 2.26923 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 179 components and 2.26924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195864Jy sigma=1.762474 ! Fit after self-cal, rms=0.195790Jy sigma=1.762166 ! Inverting map ! Added new window around map position (-7.6, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673747 Jy ! Component: 100 - total flux cleaned = 0.0075705 Jy ! Component: 150 - total flux cleaned = 0.00831674 Jy ! Component: 200 - total flux cleaned = 0.00866268 Jy ! Total flux subtracted in 200 components = 0.00866268 Jy ! Clean residual min=-0.006782 max=0.008026 Jy/beam ! Clean residual mean=0.000362 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 2.2779 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 199 components and 2.2779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195297Jy sigma=1.756855 ! Fit after self-cal, rms=0.195228Jy sigma=1.756552 ! Inverting map ! Added new window around map position (-28, -23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060432 Jy ! Component: 100 - total flux cleaned = 0.00639469 Jy ! Component: 150 - total flux cleaned = 0.00688106 Jy ! Component: 200 - total flux cleaned = 0.00672408 Jy ! Total flux subtracted in 200 components = 0.00672408 Jy ! Clean residual min=-0.006524 max=0.007669 Jy/beam ! Clean residual mean=0.000276 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 2.28462 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 208 components and 2.28462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194853Jy sigma=1.752506 ! Fit after self-cal, rms=0.194776Jy sigma=1.752238 ! Inverting map ! Added new window around map position (18.6, -28.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643461 Jy ! Component: 100 - total flux cleaned = 0.00774277 Jy ! Component: 150 - total flux cleaned = 0.00789387 Jy ! Component: 200 - total flux cleaned = 0.00803973 Jy ! Total flux subtracted in 200 components = 0.00803973 Jy ! Clean residual min=-0.006716 max=0.007095 Jy/beam ! Clean residual mean=0.000201 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 2.29266 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 220 components and 2.29266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194460Jy sigma=1.748486 ! Fit after self-cal, rms=0.194399Jy sigma=1.748253 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194399Jy sigma=1.748253 ! Fit after self-cal, rms=0.193254Jy sigma=1.740041 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6144 mas, bmaj=2.054 mas, bpa=-12.98 degrees ! Estimated noise=1.05473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050435 Jy ! Component: 100 - total flux cleaned = 0.00757904 Jy ! Component: 150 - total flux cleaned = 0.00910485 Jy ! Component: 200 - total flux cleaned = 0.00995419 Jy ! Total flux subtracted in 200 components = 0.00995419 Jy ! Clean residual min=-0.006096 max=0.006868 Jy/beam ! Clean residual mean=0.000186 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 2.30261 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 227 components and 2.30261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192992Jy sigma=1.737198 ! Fit after self-cal, rms=0.192956Jy sigma=1.737039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131271 Jy ! Component: 100 - total flux cleaned = 0.00172338 Jy ! Component: 150 - total flux cleaned = 0.00223587 Jy ! Component: 200 - total flux cleaned = 0.00235907 Jy ! Total flux subtracted in 200 components = 0.00235907 Jy ! Clean residual min=-0.006204 max=0.006513 Jy/beam ! Clean residual mean=0.000157 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 2.30497 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 241 components and 2.30497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192785Jy sigma=1.735312 ! Fit after self-cal, rms=0.192755Jy sigma=1.735249 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192755Jy sigma=1.735249 ! Fit after self-cal, rms=0.192717Jy sigma=1.734923 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=2.984 mas, bpa=1.722 degrees ! Estimated noise=1.61838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183921 Jy ! Component: 100 - total flux cleaned = 0.00350204 Jy ! Component: 150 - total flux cleaned = 0.00423844 Jy ! Component: 200 - total flux cleaned = 0.00475524 Jy ! Total flux subtracted in 200 components = 0.00475524 Jy ! Clean residual min=-0.007174 max=0.007203 Jy/beam ! Clean residual mean=0.000433 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 2.30973 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 268 components and 2.30973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192616Jy sigma=1.733759 ! Fit after self-cal, rms=0.192562Jy sigma=1.733458 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336955 Jy ! Component: 100 - total flux cleaned = 0.000395621 Jy ! Component: 150 - total flux cleaned = 0.000733718 Jy ! Component: 200 - total flux cleaned = 0.00083982 Jy ! Total flux subtracted in 200 components = 0.00083982 Jy ! Clean residual min=-0.007185 max=0.006973 Jy/beam ! Clean residual mean=0.000406 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 2.31057 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 283 components and 2.31057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192500Jy sigma=1.733054 ! Fit after self-cal, rms=0.192467Jy sigma=1.732889 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6146 mas, bmaj=2.055 mas, bpa=-12.96 degrees ! Estimated noise=1.05524 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6146 x 2.055 at -12.96 degrees (North through East) ! Clean map min=-0.0073992 max=1.0735 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192467Jy sigma=1.732889 ! Fit after self-cal, rms=0.174164Jy sigma=1.508517 ! Inverting map and beam ! Estimated beam: bmin=0.6135 mas, bmaj=2.054 mas, bpa=-12.98 degrees ! Estimated noise=1.05342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039736 Jy ! Component: 100 - total flux cleaned = 0.0049522 Jy ! Component: 150 - total flux cleaned = 0.00571316 Jy ! Component: 200 - total flux cleaned = 0.00630115 Jy ! Total flux subtracted in 200 components = 0.00630115 Jy ! Clean residual min=-0.006345 max=0.006557 Jy/beam ! Clean residual mean=0.000174 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 2.31687 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 295 components and 2.31687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173952Jy sigma=1.506342 ! Fit after self-cal, rms=0.173905Jy sigma=1.506242 ! Inverting map ! Added new window around map position (46, 32.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477281 Jy ! Component: 100 - total flux cleaned = 0.0055237 Jy ! Component: 150 - total flux cleaned = 0.00589718 Jy ! Component: 200 - total flux cleaned = 0.0058978 Jy ! Total flux subtracted in 200 components = 0.0058978 Jy ! Clean residual min=-0.006165 max=0.006455 Jy/beam ! Clean residual mean=0.000111 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 2.32277 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 308 components and 2.32277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173585Jy sigma=1.503104 ! Fit after self-cal, rms=0.173556Jy sigma=1.502901 ! Inverting map ! Added new window around map position (40.6, -44.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032162 Jy ! Component: 100 - total flux cleaned = -0.000633891 Jy ! Component: 150 - total flux cleaned = -0.000511599 Jy ! Component: 200 - total flux cleaned = -0.000974176 Jy ! Total flux subtracted in 200 components = -0.000974176 Jy ! Clean residual min=-0.005779 max=0.005923 Jy/beam ! Clean residual mean=0.000105 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 2.32179 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 325 components and 2.32179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173187Jy sigma=1.500015 ! Fit after self-cal, rms=0.173149Jy sigma=1.499779 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173149Jy sigma=1.499779 ! Fit after self-cal, rms=0.173104Jy sigma=1.498973 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5452 mas, bmaj=1.857 mas, bpa=-14.25 degrees ! Estimated noise=1.27379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.833366 Jy ! Component: 100 - total flux cleaned = 1.23583 Jy ! Component: 150 - total flux cleaned = 1.46325 Jy ! Component: 200 - total flux cleaned = 1.61306 Jy ! Total flux subtracted in 200 components = 1.61306 Jy ! Clean residual min=-0.036976 max=0.082910 Jy/beam ! Clean residual mean=0.001007 rms=0.008632 Jy/beam ! Combined flux in latest and established models = 1.61306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.61306 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6134 mas, bmaj=2.055 mas, bpa=-12.95 degrees ! Estimated noise=1.05339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167654 Jy ! Component: 100 - total flux cleaned = 0.273751 Jy ! Component: 150 - total flux cleaned = 0.347338 Jy ! Component: 200 - total flux cleaned = 0.402397 Jy ! Total flux subtracted in 200 components = 0.402397 Jy ! Clean residual min=-0.011003 max=0.035660 Jy/beam ! Clean residual mean=0.004252 rms=0.004766 Jy/beam ! Combined flux in latest and established models = 2.01545 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 82 components and 2.01545 Jy ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425722 Jy ! Component: 100 - total flux cleaned = 0.0753904 Jy ! Component: 150 - total flux cleaned = 0.101619 Jy ! Component: 200 - total flux cleaned = 0.123361 Jy ! Total flux subtracted in 200 components = 0.123361 Jy ! Clean residual min=-0.008304 max=0.016524 Jy/beam ! Clean residual mean=0.002543 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 2.13881 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 143 components and 2.13881 Jy ! Inverting map ! Added new window around map position (9.2, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019314 Jy ! Component: 100 - total flux cleaned = 0.035812 Jy ! Component: 150 - total flux cleaned = 0.0504553 Jy ! Component: 200 - total flux cleaned = 0.0637171 Jy ! Total flux subtracted in 200 components = 0.0637171 Jy ! Clean residual min=-0.007169 max=0.011394 Jy/beam ! Clean residual mean=0.001709 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 2.20253 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 176 components and 2.20253 Jy ! Inverting map ! Added new window around map position (34.4, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126715 Jy ! Component: 100 - total flux cleaned = 0.0238046 Jy ! Component: 150 - total flux cleaned = 0.0340116 Jy ! Component: 200 - total flux cleaned = 0.0434233 Jy ! Total flux subtracted in 200 components = 0.0434233 Jy ! Clean residual min=-0.006829 max=0.008487 Jy/beam ! Clean residual mean=0.001163 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 2.24595 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 193 components and 2.24595 Jy ! Inverting map ! Added new window around map position (-6.8, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00889867 Jy ! Component: 100 - total flux cleaned = 0.0160048 Jy ! Component: 150 - total flux cleaned = 0.0220067 Jy ! Component: 200 - total flux cleaned = 0.027343 Jy ! Total flux subtracted in 200 components = 0.027343 Jy ! Clean residual min=-0.006544 max=0.007489 Jy/beam ! Clean residual mean=0.000815 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 2.2733 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 222 components and 2.2733 Jy ! Inverting map ! Added new window around map position (-45.6, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581219 Jy ! Component: 100 - total flux cleaned = 0.00983024 Jy ! Component: 150 - total flux cleaned = 0.0133966 Jy ! Component: 200 - total flux cleaned = 0.0165583 Jy ! Total flux subtracted in 200 components = 0.0165583 Jy ! Clean residual min=-0.006140 max=0.006801 Jy/beam ! Clean residual mean=0.000601 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 2.28985 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 237 components and 2.28985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=2.983 mas, bpa=1.652 degrees ! Estimated noise=1.62035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101583 Jy ! Component: 100 - total flux cleaned = 0.0170644 Jy ! Component: 150 - total flux cleaned = 0.0216784 Jy ! Component: 200 - total flux cleaned = 0.0254524 Jy ! Total flux subtracted in 200 components = 0.0254524 Jy ! Clean residual min=-0.006967 max=0.007013 Jy/beam ! Clean residual mean=0.000754 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 2.31531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276666 Jy ! Component: 100 - total flux cleaned = 0.00474208 Jy ! Component: 150 - total flux cleaned = 0.00593875 Jy ! Component: 200 - total flux cleaned = 0.00635725 Jy ! Total flux subtracted in 200 components = 0.00635725 Jy ! Clean residual min=-0.006665 max=0.006156 Jy/beam ! Clean residual mean=0.000518 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 2.32166 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 299 components and 2.32166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6134 mas, bmaj=2.055 mas, bpa=-12.95 degrees ! Estimated noise=1.05339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433872 Jy ! Component: 100 - total flux cleaned = -0.000621033 Jy ! Component: 150 - total flux cleaned = -0.000980273 Jy ! Component: 200 - total flux cleaned = -0.000812126 Jy ! Total flux subtracted in 200 components = -0.000812126 Jy ! Clean residual min=-0.005974 max=0.006049 Jy/beam ! Clean residual mean=0.000191 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 2.32085 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 319 components and 2.32085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173513Jy sigma=1.501916 ! Fit after self-cal, rms=0.173197Jy sigma=1.499007 wmodel J0339-0146_X_map.mod ! Writing 319 model components to file: J0339-0146_X_map.mod wobs J0339-0146_X_uvs.fits ! Writing UV FITS file: J0339-0146_X_uvs.fits wwins J0339-0146_X_map.win ! wwins: Wrote 19 windows to J0339-0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220327 Jy ! Component: 100 - total flux cleaned = 0.00415558 Jy ! Component: 150 - total flux cleaned = 0.0053451 Jy ! Component: 200 - total flux cleaned = 0.00630619 Jy ! Component: 250 - total flux cleaned = 0.00696174 Jy ! Component: 300 - total flux cleaned = 0.0073288 Jy ! Component: 350 - total flux cleaned = 0.00759926 Jy ! Component: 400 - total flux cleaned = 0.00804227 Jy ! Component: 450 - total flux cleaned = 0.00847657 Jy ! Component: 500 - total flux cleaned = 0.00881799 Jy ! Component: 550 - total flux cleaned = 0.00932359 Jy ! Component: 600 - total flux cleaned = 0.00982065 Jy ! Component: 650 - total flux cleaned = 0.00998402 Jy ! Component: 700 - total flux cleaned = 0.0102281 Jy ! Component: 750 - total flux cleaned = 0.0105476 Jy ! Component: 800 - total flux cleaned = 0.0108654 Jy ! Component: 850 - total flux cleaned = 0.0110223 Jy ! Component: 900 - total flux cleaned = 0.0112555 Jy ! Component: 950 - total flux cleaned = 0.0116396 Jy ! Component: 1000 - total flux cleaned = 0.0117158 Jy ! Component: 1050 - total flux cleaned = 0.0119421 Jy ! Component: 1100 - total flux cleaned = 0.012017 Jy ! Component: 1150 - total flux cleaned = 0.0124607 Jy ! Component: 1200 - total flux cleaned = 0.0126069 Jy ! Component: 1250 - total flux cleaned = 0.0126796 Jy ! Component: 1300 - total flux cleaned = 0.0129676 Jy ! Component: 1350 - total flux cleaned = 0.0131104 Jy ! Component: 1400 - total flux cleaned = 0.0132515 Jy ! Component: 1450 - total flux cleaned = 0.0133218 Jy ! Component: 1500 - total flux cleaned = 0.0133214 Jy ! Component: 1550 - total flux cleaned = 0.0135983 Jy ! Component: 1600 - total flux cleaned = 0.0136667 Jy ! Component: 1650 - total flux cleaned = 0.0138706 Jy ! Component: 1700 - total flux cleaned = 0.0139377 Jy ! Component: 1750 - total flux cleaned = 0.0141384 Jy ! Component: 1800 - total flux cleaned = 0.0141378 Jy ! Component: 1850 - total flux cleaned = 0.0144022 Jy ! Component: 1900 - total flux cleaned = 0.0144674 Jy ! Component: 1950 - total flux cleaned = 0.0144024 Jy ! Component: 2000 - total flux cleaned = 0.0145967 Jy ! Component: 2050 - total flux cleaned = 0.0146605 Jy ! Component: 2100 - total flux cleaned = 0.0145967 Jy ! Component: 2150 - total flux cleaned = 0.014661 Jy ! Component: 2200 - total flux cleaned = 0.0149134 Jy ! Component: 2250 - total flux cleaned = 0.0150385 Jy ! Component: 2300 - total flux cleaned = 0.0151008 Jy ! Component: 2350 - total flux cleaned = 0.0152246 Jy ! Component: 2400 - total flux cleaned = 0.0152858 Jy ! Component: 2450 - total flux cleaned = 0.0152859 Jy ! Component: 2500 - total flux cleaned = 0.0154074 Jy ! Component: 2550 - total flux cleaned = 0.0155883 Jy ! Component: 2600 - total flux cleaned = 0.0157679 Jy ! Component: 2650 - total flux cleaned = 0.0157677 Jy ! Component: 2700 - total flux cleaned = 0.0158265 Jy ! Component: 2750 - total flux cleaned = 0.0159441 Jy ! Component: 2800 - total flux cleaned = 0.0159439 Jy ! Component: 2850 - total flux cleaned = 0.016235 Jy ! Component: 2900 - total flux cleaned = 0.0162926 Jy ! Component: 2950 - total flux cleaned = 0.0162927 Jy ! Component: 3000 - total flux cleaned = 0.0164069 Jy ! Component: 3050 - total flux cleaned = 0.0166342 Jy ! Component: 3100 - total flux cleaned = 0.0166343 Jy ! Component: 3150 - total flux cleaned = 0.0168593 Jy ! Component: 3200 - total flux cleaned = 0.0169712 Jy ! Component: 3250 - total flux cleaned = 0.0170824 Jy ! Component: 3300 - total flux cleaned = 0.0171377 Jy ! Component: 3350 - total flux cleaned = 0.0173029 Jy ! Component: 3400 - total flux cleaned = 0.0173576 Jy ! Component: 3450 - total flux cleaned = 0.0174666 Jy ! Component: 3500 - total flux cleaned = 0.0175207 Jy ! Component: 3550 - total flux cleaned = 0.0175746 Jy ! Component: 3600 - total flux cleaned = 0.0176284 Jy ! Component: 3650 - total flux cleaned = 0.0177891 Jy ! Component: 3700 - total flux cleaned = 0.0177894 Jy ! Component: 3750 - total flux cleaned = 0.0181066 Jy ! Component: 3800 - total flux cleaned = 0.0179487 Jy ! Component: 3850 - total flux cleaned = 0.018106 Jy ! Component: 3900 - total flux cleaned = 0.0182101 Jy ! Component: 3950 - total flux cleaned = 0.0182617 Jy ! Component: 4000 - total flux cleaned = 0.0182619 Jy ! Component: 4050 - total flux cleaned = 0.0183646 Jy ! Total flux subtracted in 4096 components = 0.0183645 Jy ! Clean residual min=-0.003279 max=0.003191 Jy/beam ! Clean residual mean=0.000012 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 2.33922 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 656 components and 2.33922 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0339-0146_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6134 x 2.055 at -12.95 degrees (North through East) ! Clean map min=-0.0044505 max=1.0621 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0339-0146_X_map.fits wmodel /scr/pima/rv102_uvs/J0339-0146_X_map.mod ! Writing 656 model components to file: /scr/pima/rv102_uvs/J0339-0146_X_map.mod wobs /scr/pima/rv102_uvs/J0339-0146_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0339-0146_X_uvs.fits wwins /scr/pima/rv102_uvs/J0339-0146_X_map.win ! wwins: Wrote 20 windows to /scr/pima/rv102_uvs/J0339-0146_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.06211 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000879985 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.248557 0.248557 0.497113 0.994226 1.98845 3.97691 7.95381 15.9076 31.8152 63.6305 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.062 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1206.97 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0339-0146_X_dfm.log closed on Sat Nov 9 10:16:33 2019