! Started logfile: /scr/pima/rv102_uvs/J0339-0146_S_uvs.log on Sat Feb 27 22:23:13 2016 obs /scr/pima/rv102_uvs/J0339-0146_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0339-0146_S_uva.fits ! AN table 1: 4 integrations on 6 of 6 possible baselines. ! AN table 2: 8 integrations on 3 of 3 possible baselines. ! AN table 3: 2 integrations on 10 of 10 possible baselines. ! AN table 4: 2 integrations on 10 of 10 possible baselines. ! AN table 5: 4 integrations on 21 of 21 possible baselines. ! AN table 6: 2 integrations on 10 of 10 possible baselines. ! AN table 7: 2 integrations on 15 of 15 possible baselines. ! AN table 8: 2 integrations on 6 of 6 possible baselines. ! AN table 9: 2 integrations on 1 of 1 possible baselines. ! AN table 10: 2 integrations on 6 of 6 possible baselines. ! AN table 11: 2 integrations on 1 of 1 possible baselines. ! AN table 12: 2 integrations on 3 of 3 possible baselines. ! AN table 13: 2 integrations on 36 of 36 possible baselines. ! AN table 14: 2 integrations on 28 of 28 possible baselines. ! AN table 15: 2 integrations on 3 of 3 possible baselines. ! AN table 16: 2 integrations on 10 of 10 possible baselines. ! AN table 17: 2 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.849515 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 1400 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0339-0146_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 17. ! ! Fit before self-cal, rms=2.676289Jy sigma=14.760833 ! Fit after self-cal, rms=1.728872Jy sigma=9.346764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.746 mas, bpa=-13.85 degrees ! Estimated noise=3.11061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.729899 Jy ! Component: 100 - total flux cleaned = 0.856973 Jy ! Total flux subtracted in 100 components = 0.856973 Jy ! Clean residual min=-0.187363 max=0.268995 Jy/beam ! Clean residual mean=0.000277 rms=0.051214 Jy/beam ! Combined flux in latest and established models = 0.856973 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.856973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.779737Jy sigma=8.705327 ! Fit after self-cal, rms=1.779228Jy sigma=8.699330 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=7.974 mas, bpa=-13.47 degrees ! Estimated noise=2.61516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.336453 Jy ! Component: 100 - total flux cleaned = 0.551798 Jy ! Component: 150 - total flux cleaned = 0.702418 Jy ! Component: 200 - total flux cleaned = 0.796531 Jy ! Total flux subtracted in 200 components = 0.796531 Jy ! Clean residual min=-0.181836 max=0.248562 Jy/beam ! Clean residual mean=-0.010573 rms=0.051225 Jy/beam ! Combined flux in latest and established models = 1.6535 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 45 components and 1.6535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.621439Jy sigma=7.928992 ! Fit after self-cal, rms=1.603900Jy sigma=7.855928 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 7.974 at -13.47 degrees (North through East) ! Clean map min=-0.17054 max=0.95375 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* ON 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* ON 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* ON 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* ON 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=1.603900Jy sigma=7.855928 ! Fit after self-cal, rms=1.467491Jy sigma=8.244205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11636 Jy ! Component: 100 - total flux cleaned = 0.142634 Jy ! Component: 150 - total flux cleaned = 0.154369 Jy ! Component: 200 - total flux cleaned = 0.157256 Jy ! Total flux subtracted in 200 components = 0.157256 Jy ! Clean residual min=-0.205689 max=0.196815 Jy/beam ! Clean residual mean=-0.011777 rms=0.048528 Jy/beam ! Combined flux in latest and established models = 1.81076 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 1.81076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.455509Jy sigma=7.683821 ! Fit after self-cal, rms=1.451747Jy sigma=7.668075 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.451747Jy sigma=7.668075 ! Fit after self-cal, rms=1.451747Jy sigma=7.668075 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254402 Jy ! Component: 100 - total flux cleaned = 0.0226882 Jy ! Component: 150 - total flux cleaned = 0.0251243 Jy ! Component: 200 - total flux cleaned = 0.0296096 Jy ! Total flux subtracted in 200 components = 0.0296096 Jy ! Clean residual min=-0.202192 max=0.179932 Jy/beam ! Clean residual mean=-0.012813 rms=0.046853 Jy/beam ! Combined flux in latest and established models = 1.84037 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 1.84037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.441088Jy sigma=7.493264 ! Fit after self-cal, rms=1.439900Jy sigma=7.489147 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289083 Jy ! Component: 100 - total flux cleaned = 0.00290605 Jy ! Component: 150 - total flux cleaned = 0.00688426 Jy ! Component: 200 - total flux cleaned = 0.00873081 Jy ! Total flux subtracted in 200 components = 0.00873081 Jy ! Clean residual min=-0.201196 max=0.170313 Jy/beam ! Clean residual mean=-0.013111 rms=0.046081 Jy/beam ! Combined flux in latest and established models = 1.8491 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 1.8491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.430384Jy sigma=7.401251 ! Fit after self-cal, rms=1.429563Jy sigma=7.398501 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.429563Jy sigma=7.398501 ! Fit after self-cal, rms=1.429563Jy sigma=7.398501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208145 Jy ! Component: 100 - total flux cleaned = -0.000201332 Jy ! Component: 150 - total flux cleaned = 0.00153271 Jy ! Component: 200 - total flux cleaned = 0.00312818 Jy ! Total flux subtracted in 200 components = 0.00312818 Jy ! Clean residual min=-0.201034 max=0.164125 Jy/beam ! Clean residual mean=-0.013214 rms=0.045620 Jy/beam ! Combined flux in latest and established models = 1.85223 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 1.85223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.421873Jy sigma=7.344781 ! Fit after self-cal, rms=1.421248Jy sigma=7.342156 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218322 Jy ! Component: 100 - total flux cleaned = -0.001673 Jy ! Component: 150 - total flux cleaned = -0.00163464 Jy ! Component: 200 - total flux cleaned = -0.0016084 Jy ! Total flux subtracted in 200 components = -0.0016084 Jy ! Clean residual min=-0.200841 max=0.162637 Jy/beam ! Clean residual mean=-0.013168 rms=0.045326 Jy/beam ! Combined flux in latest and established models = 1.85062 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 1.85062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.414863Jy sigma=7.309168 ! Fit after self-cal, rms=1.414454Jy sigma=7.306436 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.414454Jy sigma=7.306436 ! Fit after self-cal, rms=1.414454Jy sigma=7.306436 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.765 mas, bmaj=12.49 mas, bpa=-12.94 degrees ! Estimated noise=3.4835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612341 Jy ! Component: 100 - total flux cleaned = 0.013146 Jy ! Component: 150 - total flux cleaned = 0.00742266 Jy ! Component: 200 - total flux cleaned = 0.00236905 Jy ! Total flux subtracted in 200 components = 0.00236905 Jy ! Clean residual min=-0.308784 max=0.266842 Jy/beam ! Clean residual mean=-0.029354 rms=0.084581 Jy/beam ! Combined flux in latest and established models = 1.85299 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 1.85299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.401697Jy sigma=7.404937 ! Fit after self-cal, rms=1.400735Jy sigma=7.393390 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00943046 Jy ! Component: 100 - total flux cleaned = -0.0141632 Jy ! Component: 150 - total flux cleaned = -0.0169713 Jy ! Component: 200 - total flux cleaned = -0.0208635 Jy ! Total flux subtracted in 200 components = -0.0208635 Jy ! Clean residual min=-0.305869 max=0.266728 Jy/beam ! Clean residual mean=-0.027885 rms=0.084318 Jy/beam ! Combined flux in latest and established models = 1.83213 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 1.83213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.397831Jy sigma=7.428756 ! Fit after self-cal, rms=1.397759Jy sigma=7.424770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 7.853 at -13.86 degrees (North through East) ! Clean map min=-0.19301 max=0.92407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.397759Jy sigma=7.424770 ! Fit after self-cal, rms=1.397759Jy sigma=7.424770 ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0106525 Jy ! Component: 100 - total flux cleaned = -0.0138875 Jy ! Component: 150 - total flux cleaned = -0.013868 Jy ! Component: 200 - total flux cleaned = -0.0138899 Jy ! Total flux subtracted in 200 components = -0.0138899 Jy ! Clean residual min=-0.196711 max=0.166428 Jy/beam ! Clean residual mean=-0.012161 rms=0.044913 Jy/beam ! Combined flux in latest and established models = 1.81824 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 1.81824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.399816Jy sigma=7.299520 ! Fit after self-cal, rms=1.399462Jy sigma=7.297301 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735283 Jy ! Component: 100 - total flux cleaned = 0.00616025 Jy ! Component: 150 - total flux cleaned = 0.00616653 Jy ! Component: 200 - total flux cleaned = 0.0061564 Jy ! Total flux subtracted in 200 components = 0.0061564 Jy ! Clean residual min=-0.197624 max=0.165171 Jy/beam ! Clean residual mean=-0.012372 rms=0.044777 Jy/beam ! Combined flux in latest and established models = 1.82439 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 135 components and 1.82439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.396121Jy sigma=7.273879 ! Fit after self-cal, rms=1.396121Jy sigma=7.272622 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.396121Jy sigma=7.272622 ! Fit after self-cal, rms=1.396121Jy sigma=7.272622 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.474 mas, bmaj=6.692 mas, bpa=-14.26 degrees ! Estimated noise=3.10498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.709123 Jy ! Component: 100 - total flux cleaned = 0.972053 Jy ! Component: 150 - total flux cleaned = 1.12695 Jy ! Component: 200 - total flux cleaned = 1.26935 Jy ! Total flux subtracted in 200 components = 1.26935 Jy ! Clean residual min=-0.163021 max=0.229358 Jy/beam ! Clean residual mean=-0.000115 rms=0.043332 Jy/beam ! Combined flux in latest and established models = 1.26935 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.26935 Jy ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263067 Jy ! Component: 100 - total flux cleaned = 0.446477 Jy ! Component: 150 - total flux cleaned = 0.52767 Jy ! Component: 200 - total flux cleaned = 0.56187 Jy ! Total flux subtracted in 200 components = 0.56187 Jy ! Clean residual min=-0.185274 max=0.189591 Jy/beam ! Clean residual mean=-0.012716 rms=0.044425 Jy/beam ! Combined flux in latest and established models = 1.83122 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 52 components and 1.83122 Jy ! Inverting map ! Added new window around map position (-16.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191806 Jy ! Component: 100 - total flux cleaned = 0.201887 Jy ! Component: 150 - total flux cleaned = 0.218894 Jy ! Component: 200 - total flux cleaned = 0.226524 Jy ! Total flux subtracted in 200 components = 0.226524 Jy ! Clean residual min=-0.175849 max=0.120930 Jy/beam ! Clean residual mean=-0.020074 rms=0.039068 Jy/beam ! Combined flux in latest and established models = 2.05774 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 2.05774 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.765 mas, bmaj=12.49 mas, bpa=-12.94 degrees ! Estimated noise=3.4835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054964 Jy ! Component: 100 - total flux cleaned = 0.0101889 Jy ! Component: 150 - total flux cleaned = 0.0145399 Jy ! Component: 200 - total flux cleaned = 0.0187327 Jy ! Total flux subtracted in 200 components = 0.0187327 Jy ! Clean residual min=-0.262883 max=0.179063 Jy/beam ! Clean residual mean=-0.045583 rms=0.068167 Jy/beam ! Combined flux in latest and established models = 2.07647 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389982 Jy ! Component: 100 - total flux cleaned = 0.00391049 Jy ! Component: 150 - total flux cleaned = 0.004037 Jy ! Component: 200 - total flux cleaned = 0.0071531 Jy ! Total flux subtracted in 200 components = 0.0071531 Jy ! Clean residual min=-0.258350 max=0.171412 Jy/beam ! Clean residual mean=-0.046220 rms=0.066719 Jy/beam ! Combined flux in latest and established models = 2.08363 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 2.08363 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.853 mas, bpa=-13.86 degrees ! Estimated noise=2.64134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462725 Jy ! Component: 100 - total flux cleaned = 0.0323656 Jy ! Component: 150 - total flux cleaned = 0.0262497 Jy ! Component: 200 - total flux cleaned = 0.0178018 Jy ! Total flux subtracted in 200 components = 0.0178018 Jy ! Clean residual min=-0.157058 max=0.109636 Jy/beam ! Clean residual mean=-0.021583 rms=0.037243 Jy/beam ! Combined flux in latest and established models = 2.10143 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 2.10143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.324790Jy sigma=6.314466 ! Fit after self-cal, rms=1.304904Jy sigma=6.212112 wmodel /scr/pima/rv102_uvs/J0339-0146_S_map.mod ! Writing 115 model components to file: /scr/pima/rv102_uvs/J0339-0146_S_map.mod wobs /scr/pima/rv102_uvs/J0339-0146_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0339-0146_S_uvs.fits wwins /scr/pima/rv102_uvs/J0339-0146_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv102_uvs/J0339-0146_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0715177 Jy ! Component: 100 - total flux cleaned = -0.132328 Jy ! Component: 150 - total flux cleaned = -0.181815 Jy ! Component: 200 - total flux cleaned = -0.22029 Jy ! Component: 250 - total flux cleaned = -0.255091 Jy ! Component: 300 - total flux cleaned = -0.274926 Jy ! Component: 350 - total flux cleaned = -0.292251 Jy ! Component: 400 - total flux cleaned = -0.309082 Jy ! Component: 450 - total flux cleaned = -0.321826 Jy ! Component: 500 - total flux cleaned = -0.336063 Jy ! Component: 550 - total flux cleaned = -0.349945 Jy ! Component: 600 - total flux cleaned = -0.360131 Jy ! Component: 650 - total flux cleaned = -0.373443 Jy ! Component: 700 - total flux cleaned = -0.386444 Jy ! Component: 750 - total flux cleaned = -0.397587 Jy ! Component: 800 - total flux cleaned = -0.408518 Jy ! Component: 850 - total flux cleaned = -0.420764 Jy ! Component: 900 - total flux cleaned = -0.429781 Jy ! Component: 950 - total flux cleaned = -0.438625 Jy ! Component: 1000 - total flux cleaned = -0.448761 Jy ! Component: 1050 - total flux cleaned = -0.45587 Jy ! Component: 1100 - total flux cleaned = -0.464259 Jy ! Component: 1150 - total flux cleaned = -0.471126 Jy ! Component: 1200 - total flux cleaned = -0.477901 Jy ! Component: 1250 - total flux cleaned = -0.48323 Jy ! Component: 1300 - total flux cleaned = -0.48849 Jy ! Component: 1350 - total flux cleaned = -0.491096 Jy ! Component: 1400 - total flux cleaned = -0.494953 Jy ! Component: 1450 - total flux cleaned = -0.501291 Jy ! Component: 1500 - total flux cleaned = -0.505045 Jy ! Component: 1550 - total flux cleaned = -0.508756 Jy ! Component: 1600 - total flux cleaned = -0.512422 Jy ! Component: 1650 - total flux cleaned = -0.516044 Jy ! Component: 1700 - total flux cleaned = -0.519623 Jy ! Component: 1750 - total flux cleaned = -0.5208 Jy ! Component: 1800 - total flux cleaned = -0.524308 Jy ! Component: 1850 - total flux cleaned = -0.527762 Jy ! Component: 1900 - total flux cleaned = -0.530039 Jy ! Component: 1950 - total flux cleaned = -0.533415 Jy ! Component: 2000 - total flux cleaned = -0.534523 Jy ! Component: 2050 - total flux cleaned = -0.536741 Jy ! Component: 2100 - total flux cleaned = -0.538938 Jy ! Component: 2150 - total flux cleaned = -0.542189 Jy ! Component: 2200 - total flux cleaned = -0.543258 Jy ! Component: 2250 - total flux cleaned = -0.545387 Jy ! Component: 2300 - total flux cleaned = -0.547492 Jy ! Component: 2350 - total flux cleaned = -0.550615 Jy ! Component: 2400 - total flux cleaned = -0.551643 Jy ! Component: 2450 - total flux cleaned = -0.554705 Jy ! Component: 2500 - total flux cleaned = -0.555712 Jy ! Component: 2550 - total flux cleaned = -0.557717 Jy ! Component: 2600 - total flux cleaned = -0.559699 Jy ! Component: 2650 - total flux cleaned = -0.560684 Jy ! Component: 2700 - total flux cleaned = -0.562642 Jy ! Component: 2750 - total flux cleaned = -0.566517 Jy ! Component: 2800 - total flux cleaned = -0.567468 Jy ! Component: 2850 - total flux cleaned = -0.568416 Jy ! Component: 2900 - total flux cleaned = -0.569357 Jy ! Component: 2950 - total flux cleaned = -0.56936 Jy ! Component: 3000 - total flux cleaned = -0.572151 Jy ! Component: 3050 - total flux cleaned = -0.573074 Jy ! Component: 3100 - total flux cleaned = -0.574902 Jy ! Component: 3150 - total flux cleaned = -0.576717 Jy ! Component: 3200 - total flux cleaned = -0.577617 Jy ! Component: 3250 - total flux cleaned = -0.580292 Jy ! Component: 3300 - total flux cleaned = -0.580291 Jy ! Component: 3350 - total flux cleaned = -0.582051 Jy ! Component: 3400 - total flux cleaned = -0.585536 Jy ! Component: 3450 - total flux cleaned = -0.585535 Jy ! Component: 3500 - total flux cleaned = -0.588109 Jy ! Component: 3550 - total flux cleaned = -0.589809 Jy ! Component: 3600 - total flux cleaned = -0.58981 Jy ! Component: 3650 - total flux cleaned = -0.592333 Jy ! Component: 3700 - total flux cleaned = -0.593166 Jy ! Component: 3750 - total flux cleaned = -0.595648 Jy ! Component: 3800 - total flux cleaned = -0.596471 Jy ! Component: 3850 - total flux cleaned = -0.596476 Jy ! Component: 3900 - total flux cleaned = -0.598905 Jy ! Component: 3950 - total flux cleaned = -0.599707 Jy ! Component: 4000 - total flux cleaned = -0.600509 Jy ! Component: 4050 - total flux cleaned = -0.602097 Jy ! Total flux subtracted in 4096 components = -0.602097 Jy ! Clean residual min=-0.046997 max=0.042910 Jy/beam ! Clean residual mean=-0.003215 rms=0.016419 Jy/beam ! Combined flux in latest and established models = 1.49933 Jy keep ! Adding 421 model components to the UV plane model. ! The established model now contains 535 components and 1.49933 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0339-0146_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 7.853 at -13.86 degrees (North through East) ! Clean map min=-0.19629 max=1.0547 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0339-0146_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.05468 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0164661 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.68374 4.68374 9.36748 18.735 37.4699 74.9399 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0493 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 64.051 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0339-0146_S_uvs.log closed on Sat Feb 27 22:23:17 2016