! Started logfile: /scr/pima/rv102_uvs/J0205+3212_X_uvs.log on Sat Feb 27 22:23:07 2016 obs /scr/pima/rv102_uvs/J0205+3212_X_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0205+3212_X_uva.fits ! AN table 1: 122 integrations on 6 of 6 possible baselines. ! AN table 2: 11 integrations on 10 of 10 possible baselines. ! AN table 3: 11 integrations on 15 of 15 possible baselines. ! AN table 4: 9 integrations on 1 of 1 possible baselines. ! AN table 5: 11 integrations on 15 of 15 possible baselines. ! AN table 6: 11 integrations on 10 of 10 possible baselines. ! AN table 7: 11 integrations on 1 of 1 possible baselines. ! AN table 8: 11 integrations on 10 of 10 possible baselines. ! AN table 9: 11 integrations on 66 of 66 possible baselines. ! AN table 10: 20 integrations on 3 of 3 possible baselines. ! AN table 11: 22 integrations on 3 of 3 possible baselines. ! AN table 12: 11 integrations on 1 of 1 possible baselines. ! AN table 13: 11 integrations on 3 of 3 possible baselines. ! AN table 14: 11 integrations on 15 of 15 possible baselines. ! AN table 15: 11 integrations on 21 of 21 possible baselines. ! AN table 16: 11 integrations on 3 of 3 possible baselines. ! AN table 17: 18 integrations on 1 of 1 possible baselines. ! AN table 18: 9 integrations on 1 of 1 possible baselines. ! AN table 19: 9 integrations on 28 of 28 possible baselines. ! AN table 20: 22 integrations on 1 of 1 possible baselines. ! AN table 21: 11 integrations on 6 of 6 possible baselines. ! AN table 22: 11 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.729359 visibilities/baseline/integration-bin. ! Found source: J0205+3212 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 9152 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0205+3212_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 320 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 28 telescope corrections were flagged in sub-array 5. ! A total of 25 telescope corrections were flagged in sub-array 6. ! A total of 22 telescope corrections were flagged in sub-array 7. ! A total of 23 telescope corrections were flagged in sub-array 8. ! A total of 55 telescope corrections were flagged in sub-array 9. ! A total of 42 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 28 telescope corrections were flagged in sub-array 15. ! A total of 15 telescope corrections were flagged in sub-array 16. ! A total of 36 telescope corrections were flagged in sub-array 17. ! A total of 18 telescope corrections were flagged in sub-array 18. ! A total of 16 telescope corrections were flagged in sub-array 19. ! A total of 44 telescope corrections were flagged in sub-array 20. ! A total of 14 telescope corrections were flagged in sub-array 21. ! A total of 15 telescope corrections were flagged in sub-array 22. ! ! Correcting IF 2. ! A total of 320 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 28 telescope corrections were flagged in sub-array 5. ! A total of 25 telescope corrections were flagged in sub-array 6. ! A total of 22 telescope corrections were flagged in sub-array 7. ! A total of 23 telescope corrections were flagged in sub-array 8. ! A total of 55 telescope corrections were flagged in sub-array 9. ! A total of 42 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 28 telescope corrections were flagged in sub-array 15. ! A total of 15 telescope corrections were flagged in sub-array 16. ! A total of 36 telescope corrections were flagged in sub-array 17. ! A total of 18 telescope corrections were flagged in sub-array 18. ! A total of 16 telescope corrections were flagged in sub-array 19. ! A total of 44 telescope corrections were flagged in sub-array 20. ! A total of 14 telescope corrections were flagged in sub-array 21. ! A total of 15 telescope corrections were flagged in sub-array 22. ! ! Correcting IF 3. ! A total of 488 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 37 telescope corrections were flagged in sub-array 6. ! A total of 22 telescope corrections were flagged in sub-array 7. ! A total of 55 telescope corrections were flagged in sub-array 8. ! A total of 62 telescope corrections were flagged in sub-array 9. ! A total of 60 telescope corrections were flagged in sub-array 10. ! A total of 66 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 31 telescope corrections were flagged in sub-array 14. ! A total of 50 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 36 telescope corrections were flagged in sub-array 17. ! A total of 18 telescope corrections were flagged in sub-array 18. ! A total of 23 telescope corrections were flagged in sub-array 19. ! A total of 44 telescope corrections were flagged in sub-array 20. ! A total of 44 telescope corrections were flagged in sub-array 21. ! A total of 15 telescope corrections were flagged in sub-array 22. ! ! Correcting IF 4. ! A total of 488 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 37 telescope corrections were flagged in sub-array 6. ! A total of 22 telescope corrections were flagged in sub-array 7. ! A total of 55 telescope corrections were flagged in sub-array 8. ! A total of 62 telescope corrections were flagged in sub-array 9. ! A total of 60 telescope corrections were flagged in sub-array 10. ! A total of 66 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 31 telescope corrections were flagged in sub-array 14. ! A total of 50 telescope corrections were flagged in sub-array 15. ! A total of 33 telescope corrections were flagged in sub-array 16. ! A total of 36 telescope corrections were flagged in sub-array 17. ! A total of 18 telescope corrections were flagged in sub-array 18. ! A total of 23 telescope corrections were flagged in sub-array 19. ! A total of 44 telescope corrections were flagged in sub-array 20. ! A total of 44 telescope corrections were flagged in sub-array 21. ! A total of 15 telescope corrections were flagged in sub-array 22. ! ! Fit before self-cal, rms=1.513480Jy sigma=14.651421 ! Fit after self-cal, rms=0.530332Jy sigma=7.176636 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1759 milli-arcsec ! Estimated beam: bmin=0.5416 mas, bmaj=0.9937 mas, bpa=-14.92 degrees ! Estimated noise=1.37908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.612857 Jy ! Component: 100 - total flux cleaned = 0.773061 Jy ! Total flux subtracted in 100 components = 0.773061 Jy ! Clean residual min=-0.094563 max=0.113367 Jy/beam ! Clean residual mean=0.000371 rms=0.023553 Jy/beam ! Combined flux in latest and established models = 0.773061 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.773061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.551037Jy sigma=6.207850 ! Fit after self-cal, rms=0.550786Jy sigma=6.199228 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1759 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1759 milli-arcsec ! Estimated beam: bmin=0.6359 mas, bmaj=1.101 mas, bpa=-14.51 degrees ! Estimated noise=1.16077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727319 Jy ! Component: 100 - total flux cleaned = 0.098851 Jy ! Component: 150 - total flux cleaned = 0.101388 Jy ! Component: 200 - total flux cleaned = 0.102055 Jy ! Total flux subtracted in 200 components = 0.102055 Jy ! Clean residual min=-0.113955 max=0.124500 Jy/beam ! Clean residual mean=0.002353 rms=0.029653 Jy/beam ! Combined flux in latest and established models = 0.875116 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.875116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524589Jy sigma=6.323902 ! Fit after self-cal, rms=0.524546Jy sigma=6.323142 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1759 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6359 x 1.101 at -14.51 degrees (North through East) ! Clean map min=-0.1055 max=0.81273 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 21. ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 21. ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.94 MA 1.00* ON 0.97 SC 0.95 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.99 MA 1.00* ON 1.04 SC 0.97 ! WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00 SC 0.88 ! WF 0.84 WZ 0.99 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.97 MK 0.89 NL 0.91 NY 1.00* ! ON 1.12 WF 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.524546Jy sigma=6.323142 ! Fit after self-cal, rms=0.505804Jy sigma=6.700843 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6128 mas, bmaj=1.081 mas, bpa=-16 degrees ! Estimated noise=1.2176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0624428 Jy ! Component: 100 - total flux cleaned = -0.0980285 Jy ! Component: 150 - total flux cleaned = -0.118858 Jy ! Component: 200 - total flux cleaned = -0.125538 Jy ! Total flux subtracted in 200 components = -0.125538 Jy ! Clean residual min=-0.113217 max=0.148807 Jy/beam ! Clean residual mean=0.003001 rms=0.030853 Jy/beam ! Combined flux in latest and established models = 0.749579 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.749579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513057Jy sigma=6.423368 ! Fit after self-cal, rms=0.512947Jy sigma=6.422556 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512947Jy sigma=6.422556 ! Fit after self-cal, rms=0.512586Jy sigma=6.420427 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6133 mas, bmaj=1.082 mas, bpa=-15.96 degrees ! Estimated noise=1.21372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00648121 Jy ! Component: 100 - total flux cleaned = -0.00822579 Jy ! Component: 150 - total flux cleaned = -0.00903648 Jy ! Component: 200 - total flux cleaned = -0.010604 Jy ! Total flux subtracted in 200 components = -0.010604 Jy ! Clean residual min=-0.112163 max=0.147312 Jy/beam ! Clean residual mean=0.002960 rms=0.030575 Jy/beam ! Combined flux in latest and established models = 0.738975 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.738975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512957Jy sigma=6.399059 ! Fit after self-cal, rms=0.512930Jy sigma=6.398800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.4, -33.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128247 Jy ! Component: 100 - total flux cleaned = 0.180638 Jy ! Component: 150 - total flux cleaned = 0.192889 Jy ! Component: 200 - total flux cleaned = 0.200893 Jy ! Total flux subtracted in 200 components = 0.200893 Jy ! Clean residual min=-0.102129 max=0.145177 Jy/beam ! Clean residual mean=0.001782 rms=0.027726 Jy/beam ! Combined flux in latest and established models = 0.939867 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.939867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.492806Jy sigma=5.877729 ! Fit after self-cal, rms=0.482933Jy sigma=5.790999 ! Inverting map ! Added new window around map position (35, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104557 Jy ! Component: 100 - total flux cleaned = 0.155697 Jy ! Component: 150 - total flux cleaned = 0.176654 Jy ! Component: 200 - total flux cleaned = 0.181566 Jy ! Total flux subtracted in 200 components = 0.181566 Jy ! Clean residual min=-0.109833 max=0.124561 Jy/beam ! Clean residual mean=0.001398 rms=0.025227 Jy/beam ! Combined flux in latest and established models = 1.12143 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 1.12143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464382Jy sigma=5.442282 ! Fit after self-cal, rms=0.458989Jy sigma=5.388397 ! Inverting map ! Added new window around map position (11.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102361 Jy ! Component: 100 - total flux cleaned = 0.166459 Jy ! Component: 150 - total flux cleaned = 0.2149 Jy ! Component: 200 - total flux cleaned = 0.247772 Jy ! Total flux subtracted in 200 components = 0.247772 Jy ! Clean residual min=-0.102992 max=0.094993 Jy/beam ! Clean residual mean=0.000247 rms=0.022369 Jy/beam ! Combined flux in latest and established models = 1.3692 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 1.36921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.435368Jy sigma=4.992947 ! Fit after self-cal, rms=0.432647Jy sigma=4.958746 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.432647Jy sigma=4.958746 ! Fit after self-cal, rms=0.429356Jy sigma=4.943453 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.613 mas, bmaj=1.081 mas, bpa=-16.15 degrees ! Estimated noise=1.20878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263001 Jy ! Component: 100 - total flux cleaned = 0.0344831 Jy ! Component: 150 - total flux cleaned = 0.0369612 Jy ! Component: 200 - total flux cleaned = 0.0414633 Jy ! Total flux subtracted in 200 components = 0.0414633 Jy ! Clean residual min=-0.096142 max=0.082637 Jy/beam ! Clean residual mean=-0.000271 rms=0.021309 Jy/beam ! Combined flux in latest and established models = 1.41067 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 1.41067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424804Jy sigma=4.821211 ! Fit after self-cal, rms=0.424553Jy sigma=4.816444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648125 Jy ! Component: 100 - total flux cleaned = 0.00856419 Jy ! Component: 150 - total flux cleaned = 0.0115136 Jy ! Component: 200 - total flux cleaned = 0.0133601 Jy ! Total flux subtracted in 200 components = 0.0133601 Jy ! Clean residual min=-0.092398 max=0.080377 Jy/beam ! Clean residual mean=-0.000344 rms=0.020899 Jy/beam ! Combined flux in latest and established models = 1.42403 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 80 components and 1.42403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421746Jy sigma=4.746473 ! Fit after self-cal, rms=0.421581Jy sigma=4.744353 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421581Jy sigma=4.744353 ! Fit after self-cal, rms=0.421533Jy sigma=4.743757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=3.259 mas, bpa=61.66 degrees ! Estimated noise=1.83522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069756 Jy ! Component: 100 - total flux cleaned = 0.0137212 Jy ! Component: 150 - total flux cleaned = 0.0242102 Jy ! Component: 200 - total flux cleaned = 0.0301705 Jy ! Total flux subtracted in 200 components = 0.0301705 Jy ! Clean residual min=-0.167457 max=0.130140 Jy/beam ! Clean residual mean=-0.000364 rms=0.043016 Jy/beam ! Combined flux in latest and established models = 1.4542 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 1.4542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425738Jy sigma=4.722062 ! Fit after self-cal, rms=0.424630Jy sigma=4.698454 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031146 Jy ! Component: 100 - total flux cleaned = 0.00725329 Jy ! Component: 150 - total flux cleaned = 0.00975316 Jy ! Component: 200 - total flux cleaned = 0.0108642 Jy ! Total flux subtracted in 200 components = 0.0108642 Jy ! Clean residual min=-0.157967 max=0.122927 Jy/beam ! Clean residual mean=-0.000468 rms=0.041493 Jy/beam ! Combined flux in latest and established models = 1.46506 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 1.46506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429549Jy sigma=4.760242 ! Fit after self-cal, rms=0.429618Jy sigma=4.749632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6127 mas, bmaj=1.081 mas, bpa=-16.19 degrees ! Estimated noise=1.2086 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6127 x 1.081 at -16.19 degrees (North through East) ! Clean map min=-0.10504 max=0.72819 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429618Jy sigma=4.749632 ! Fit after self-cal, rms=0.428401Jy sigma=4.740130 ! Inverting map and beam ! Estimated beam: bmin=0.6132 mas, bmaj=1.081 mas, bpa=-16.06 degrees ! Estimated noise=1.20786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127722 Jy ! Component: 100 - total flux cleaned = 0.00623138 Jy ! Component: 150 - total flux cleaned = 0.000779949 Jy ! Component: 200 - total flux cleaned = -0.00203934 Jy ! Total flux subtracted in 200 components = -0.00203934 Jy ! Clean residual min=-0.092072 max=0.077490 Jy/beam ! Clean residual mean=-0.000451 rms=0.019696 Jy/beam ! Combined flux in latest and established models = 1.46302 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 1.46302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421851Jy sigma=4.648690 ! Fit after self-cal, rms=0.420496Jy sigma=4.642503 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273437 Jy ! Component: 100 - total flux cleaned = -0.00536501 Jy ! Component: 150 - total flux cleaned = -0.00613774 Jy ! Component: 200 - total flux cleaned = -0.00759494 Jy ! Total flux subtracted in 200 components = -0.00759494 Jy ! Clean residual min=-0.091570 max=0.077426 Jy/beam ! Clean residual mean=-0.000425 rms=0.019637 Jy/beam ! Combined flux in latest and established models = 1.45543 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 1.45543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418049Jy sigma=4.601280 ! Fit after self-cal, rms=0.417576Jy sigma=4.599603 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417576Jy sigma=4.599603 ! Fit after self-cal, rms=0.417276Jy sigma=4.596814 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5296 mas, bmaj=0.991 mas, bpa=-16.69 degrees ! Estimated noise=1.4515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.566301 Jy ! Component: 100 - total flux cleaned = 0.769889 Jy ! Component: 150 - total flux cleaned = 0.905251 Jy ! Component: 200 - total flux cleaned = 1.00638 Jy ! Total flux subtracted in 200 components = 1.00638 Jy ! Clean residual min=-0.091534 max=0.097677 Jy/beam ! Clean residual mean=0.000191 rms=0.020809 Jy/beam ! Combined flux in latest and established models = 1.00638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.00638 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6127 mas, bmaj=1.08 mas, bpa=-16.12 degrees ! Estimated noise=1.20666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.2, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115529 Jy ! Component: 100 - total flux cleaned = 0.187349 Jy ! Component: 150 - total flux cleaned = 0.23593 Jy ! Component: 200 - total flux cleaned = 0.275215 Jy ! Total flux subtracted in 200 components = 0.275215 Jy ! Clean residual min=-0.094996 max=0.092442 Jy/beam ! Clean residual mean=0.000092 rms=0.021728 Jy/beam ! Combined flux in latest and established models = 1.2816 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 1.2816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.511 mas, bmaj=3.255 mas, bpa=61.58 degrees ! Estimated noise=1.83189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809519 Jy ! Component: 100 - total flux cleaned = 0.101187 Jy ! Component: 150 - total flux cleaned = 0.115018 Jy ! Component: 200 - total flux cleaned = 0.124668 Jy ! Total flux subtracted in 200 components = 0.124668 Jy ! Clean residual min=-0.160732 max=0.126848 Jy/beam ! Clean residual mean=-0.000485 rms=0.042493 Jy/beam ! Combined flux in latest and established models = 1.40626 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102876 Jy ! Component: 100 - total flux cleaned = 0.019108 Jy ! Component: 150 - total flux cleaned = 0.0235722 Jy ! Component: 200 - total flux cleaned = 0.0234389 Jy ! Total flux subtracted in 200 components = 0.0234389 Jy ! Clean residual min=-0.156392 max=0.123033 Jy/beam ! Clean residual mean=-0.000507 rms=0.040759 Jy/beam ! Combined flux in latest and established models = 1.4297 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 1.4297 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6127 mas, bmaj=1.08 mas, bpa=-16.12 degrees ! Estimated noise=1.20666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189768 Jy ! Component: 100 - total flux cleaned = 0.0224037 Jy ! Component: 150 - total flux cleaned = 0.0239976 Jy ! Component: 200 - total flux cleaned = 0.0254075 Jy ! Total flux subtracted in 200 components = 0.0254075 Jy ! Clean residual min=-0.092200 max=0.081390 Jy/beam ! Clean residual mean=-0.000358 rms=0.019835 Jy/beam ! Combined flux in latest and established models = 1.45511 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.45511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429221Jy sigma=4.697424 ! Fit after self-cal, rms=0.426261Jy sigma=4.663281 wmodel /scr/pima/rv102_uvs/J0205+3212_X_map.mod ! Writing 71 model components to file: /scr/pima/rv102_uvs/J0205+3212_X_map.mod wobs /scr/pima/rv102_uvs/J0205+3212_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0205+3212_X_uvs.fits wwins /scr/pima/rv102_uvs/J0205+3212_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv102_uvs/J0205+3212_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0346339 Jy ! Component: 100 - total flux cleaned = -0.0375496 Jy ! Component: 150 - total flux cleaned = -0.0375948 Jy ! Component: 200 - total flux cleaned = -0.0375614 Jy ! Component: 250 - total flux cleaned = -0.0350168 Jy ! Component: 300 - total flux cleaned = -0.0325713 Jy ! Component: 350 - total flux cleaned = -0.0302131 Jy ! Component: 400 - total flux cleaned = -0.0267662 Jy ! Component: 450 - total flux cleaned = -0.0234303 Jy ! Component: 500 - total flux cleaned = -0.0190998 Jy ! Component: 550 - total flux cleaned = -0.0159495 Jy ! Component: 600 - total flux cleaned = -0.0138872 Jy ! Component: 650 - total flux cleaned = -0.00788041 Jy ! Component: 700 - total flux cleaned = -0.00496316 Jy ! Component: 750 - total flux cleaned = -0.00305306 Jy ! Component: 800 - total flux cleaned = -0.000246443 Jy ! Component: 850 - total flux cleaned = 0.00342903 Jy ! Component: 900 - total flux cleaned = 0.00343244 Jy ! Component: 950 - total flux cleaned = 0.00521511 Jy ! Component: 1000 - total flux cleaned = 0.00780409 Jy ! Component: 1050 - total flux cleaned = 0.00693804 Jy ! Component: 1100 - total flux cleaned = 0.00862645 Jy ! Component: 1150 - total flux cleaned = 0.0102694 Jy ! Component: 1200 - total flux cleaned = 0.0126855 Jy ! Component: 1250 - total flux cleaned = 0.0134899 Jy ! Component: 1300 - total flux cleaned = 0.01584 Jy ! Component: 1350 - total flux cleaned = 0.0189068 Jy ! Component: 1400 - total flux cleaned = 0.0204178 Jy ! Component: 1450 - total flux cleaned = 0.0226371 Jy ! Component: 1500 - total flux cleaned = 0.021173 Jy ! Component: 1550 - total flux cleaned = 0.0233437 Jy ! Component: 1600 - total flux cleaned = 0.0254681 Jy ! Component: 1650 - total flux cleaned = 0.0254607 Jy ! Component: 1700 - total flux cleaned = 0.0295881 Jy ! Component: 1750 - total flux cleaned = 0.0302685 Jy ! Component: 1800 - total flux cleaned = 0.0309305 Jy ! Component: 1850 - total flux cleaned = 0.0315844 Jy ! Component: 1900 - total flux cleaned = 0.0322336 Jy ! Component: 1950 - total flux cleaned = 0.0328741 Jy ! Component: 2000 - total flux cleaned = 0.0316087 Jy ! Component: 2050 - total flux cleaned = 0.0328723 Jy ! Component: 2100 - total flux cleaned = 0.0347092 Jy ! Component: 2150 - total flux cleaned = 0.0359163 Jy ! Component: 2200 - total flux cleaned = 0.0341078 Jy ! Component: 2250 - total flux cleaned = 0.0335114 Jy ! Component: 2300 - total flux cleaned = 0.0340918 Jy ! Component: 2350 - total flux cleaned = 0.0346707 Jy ! Component: 2400 - total flux cleaned = 0.0346777 Jy ! Component: 2450 - total flux cleaned = 0.0346804 Jy ! Component: 2500 - total flux cleaned = 0.0335698 Jy ! Component: 2550 - total flux cleaned = 0.0352323 Jy ! Component: 2600 - total flux cleaned = 0.034687 Jy ! Component: 2650 - total flux cleaned = 0.0363053 Jy ! Component: 2700 - total flux cleaned = 0.0363158 Jy ! Component: 2750 - total flux cleaned = 0.0368412 Jy ! Component: 2800 - total flux cleaned = 0.036841 Jy ! Component: 2850 - total flux cleaned = 0.0353051 Jy ! Component: 2900 - total flux cleaned = 0.0353153 Jy ! Component: 2950 - total flux cleaned = 0.0358126 Jy ! Component: 3000 - total flux cleaned = 0.0353207 Jy ! Component: 3050 - total flux cleaned = 0.0343399 Jy ! Component: 3100 - total flux cleaned = 0.0343419 Jy ! Component: 3150 - total flux cleaned = 0.0338588 Jy ! Component: 3200 - total flux cleaned = 0.0333866 Jy ! Component: 3250 - total flux cleaned = 0.0324497 Jy ! Component: 3300 - total flux cleaned = 0.0319887 Jy ! Component: 3350 - total flux cleaned = 0.0324528 Jy ! Component: 3400 - total flux cleaned = 0.0315443 Jy ! Component: 3450 - total flux cleaned = 0.0319895 Jy ! Component: 3500 - total flux cleaned = 0.0306589 Jy ! Component: 3550 - total flux cleaned = 0.0302174 Jy ! Component: 3600 - total flux cleaned = 0.0306497 Jy ! Component: 3650 - total flux cleaned = 0.0306498 Jy ! Component: 3700 - total flux cleaned = 0.0310798 Jy ! Component: 3750 - total flux cleaned = 0.0306569 Jy ! Component: 3800 - total flux cleaned = 0.0302393 Jy ! Component: 3850 - total flux cleaned = 0.0285859 Jy ! Component: 3900 - total flux cleaned = 0.0289981 Jy ! Component: 3950 - total flux cleaned = 0.0294005 Jy ! Component: 4000 - total flux cleaned = 0.0285906 Jy ! Component: 4050 - total flux cleaned = 0.0285918 Jy ! Total flux subtracted in 4096 components = 0.028198 Jy ! Clean residual min=-0.021670 max=0.021785 Jy/beam ! Clean residual mean=-0.000171 rms=0.006531 Jy/beam ! Combined flux in latest and established models = 1.48331 Jy keep ! Adding 378 model components to the UV plane model. ! The established model now contains 447 components and 1.48331 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0205+3212_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6127 x 1.08 at -16.12 degrees (North through East) ! Clean map min=-0.099238 max=0.7117 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0205+3212_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.711699 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00652042 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.74853 2.74853 5.49706 10.9941 21.9882 43.9765 87.9529 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0195 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.711 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 109.149 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0205+3212_X_uvs.log closed on Sat Feb 27 22:23:12 2016