! Started logfile: /scr/pima/rv102_uvs/J0205+3212_S_uvs.log on Sat Feb 27 22:22:44 2016 obs /scr/pima/rv102_uvs/J0205+3212_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0205+3212_S_uva.fits ! AN table 1: 21 integrations on 6 of 6 possible baselines. ! AN table 2: 2 integrations on 10 of 10 possible baselines. ! AN table 3: 2 integrations on 15 of 15 possible baselines. ! AN table 4: 2 integrations on 1 of 1 possible baselines. ! AN table 5: 2 integrations on 15 of 15 possible baselines. ! AN table 6: 2 integrations on 3 of 3 possible baselines. ! AN table 7: 2 integrations on 1 of 1 possible baselines. ! AN table 8: 2 integrations on 10 of 10 possible baselines. ! AN table 9: 2 integrations on 66 of 66 possible baselines. ! AN table 10: 4 integrations on 3 of 3 possible baselines. ! AN table 11: 4 integrations on 3 of 3 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! AN table 13: 2 integrations on 3 of 3 possible baselines. ! AN table 14: 2 integrations on 15 of 15 possible baselines. ! AN table 15: 2 integrations on 21 of 21 possible baselines. ! AN table 16: 2 integrations on 3 of 3 possible baselines. ! AN table 17: 4 integrations on 1 of 1 possible baselines. ! AN table 18: 2 integrations on 1 of 1 possible baselines. ! AN table 19: 2 integrations on 28 of 28 possible baselines. ! AN table 20: 4 integrations on 1 of 1 possible baselines. ! AN table 21: 2 integrations on 6 of 6 possible baselines. ! AN table 22: 2 integrations on 3 of 3 possible baselines. ! AN table 23: 2 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.820922 visibilities/baseline/integration-bin. ! Found source: J0205+3212 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 1852 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0205+3212_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 17. ! A total of 4 telescope corrections were flagged in sub-array 18. ! A total of 8 telescope corrections were flagged in sub-array 20. ! A total of 4 telescope corrections were flagged in sub-array 23. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 17. ! A total of 4 telescope corrections were flagged in sub-array 18. ! A total of 8 telescope corrections were flagged in sub-array 20. ! A total of 4 telescope corrections were flagged in sub-array 23. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 17. ! A total of 4 telescope corrections were flagged in sub-array 18. ! A total of 8 telescope corrections were flagged in sub-array 20. ! A total of 4 telescope corrections were flagged in sub-array 23. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 17. ! A total of 4 telescope corrections were flagged in sub-array 18. ! A total of 8 telescope corrections were flagged in sub-array 20. ! A total of 4 telescope corrections were flagged in sub-array 23. ! ! Fit before self-cal, rms=1.622870Jy sigma=13.062242 ! Fit after self-cal, rms=0.754708Jy sigma=7.394645 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=3.322 mas, bpa=-11.79 degrees ! Estimated noise=2.51025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.555452 Jy ! Component: 100 - total flux cleaned = 0.67864 Jy ! Total flux subtracted in 100 components = 0.67864 Jy ! Clean residual min=-0.091928 max=0.113101 Jy/beam ! Clean residual mean=-0.000059 rms=0.023063 Jy/beam ! Combined flux in latest and established models = 0.67864 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.67864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.833531Jy sigma=5.606283 ! Fit after self-cal, rms=0.832721Jy sigma=5.587486 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.622 mas, bmaj=3.684 mas, bpa=-9.627 degrees ! Estimated noise=2.1078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580542 Jy ! Component: 100 - total flux cleaned = 0.0797744 Jy ! Component: 150 - total flux cleaned = 0.0836608 Jy ! Component: 200 - total flux cleaned = 0.0860854 Jy ! Total flux subtracted in 200 components = 0.0860854 Jy ! Clean residual min=-0.090202 max=0.113038 Jy/beam ! Clean residual mean=-0.001818 rms=0.026610 Jy/beam ! Combined flux in latest and established models = 0.764725 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.764725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.807347Jy sigma=5.711414 ! Fit after self-cal, rms=0.807431Jy sigma=5.711079 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.622 x 3.684 at -9.627 degrees (North through East) ! Clean map min=-0.085895 max=0.71261 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 23: ! MA 0.00* NY 0.00* ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 23: ! MA 0.00* NY 0.00* ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 23: ! MA 0.00* NY 0.00* ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! ON 0.00* OV 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! HN 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 20: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MK 1.00* NY 1.00* ON 1.00* WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 22. ! Telescope amplitude corrections in sub-array 22: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 23: ! MA 0.00* NY 0.00* ! ! ! Fit before self-cal, rms=0.807431Jy sigma=5.711079 ! Fit after self-cal, rms=0.683273Jy sigma=6.214778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0668898 Jy ! Component: 100 - total flux cleaned = -0.103018 Jy ! Component: 150 - total flux cleaned = -0.112454 Jy ! Component: 200 - total flux cleaned = -0.112468 Jy ! Total flux subtracted in 200 components = -0.112468 Jy ! Clean residual min=-0.091674 max=0.123558 Jy/beam ! Clean residual mean=0.001085 rms=0.027521 Jy/beam ! Combined flux in latest and established models = 0.652257 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.652257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.694408Jy sigma=5.901237 ! Fit after self-cal, rms=0.694288Jy sigma=5.900782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.694288Jy sigma=5.900782 ! Fit after self-cal, rms=0.694288Jy sigma=5.900782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802868 Jy ! Component: 100 - total flux cleaned = -0.0014333 Jy ! Component: 150 - total flux cleaned = -0.00142668 Jy ! Component: 200 - total flux cleaned = -0.00142937 Jy ! Total flux subtracted in 200 components = -0.00142937 Jy ! Clean residual min=-0.091487 max=0.121979 Jy/beam ! Clean residual mean=0.001106 rms=0.027448 Jy/beam ! Combined flux in latest and established models = 0.650827 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.650827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.693173Jy sigma=5.880184 ! Fit after self-cal, rms=0.693154Jy sigma=5.880139 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36.5, 85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121426 Jy ! Component: 100 - total flux cleaned = 0.189647 Jy ! Component: 150 - total flux cleaned = 0.210781 Jy ! Component: 200 - total flux cleaned = 0.21998 Jy ! Total flux subtracted in 200 components = 0.21998 Jy ! Clean residual min=-0.089226 max=0.112032 Jy/beam ! Clean residual mean=-0.002031 rms=0.024383 Jy/beam ! Combined flux in latest and established models = 0.870807 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.870807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.672302Jy sigma=5.329346 ! Fit after self-cal, rms=0.666132Jy sigma=5.266681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.666132Jy sigma=5.266681 ! Fit after self-cal, rms=0.666132Jy sigma=5.266681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567295 Jy ! Component: 100 - total flux cleaned = 0.0655249 Jy ! Component: 150 - total flux cleaned = 0.0705018 Jy ! Component: 200 - total flux cleaned = 0.0782886 Jy ! Total flux subtracted in 200 components = 0.0782886 Jy ! Clean residual min=-0.091726 max=0.091083 Jy/beam ! Clean residual mean=-0.003150 rms=0.023088 Jy/beam ! Combined flux in latest and established models = 0.949096 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.949096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.658925Jy sigma=5.112879 ! Fit after self-cal, rms=0.657496Jy sigma=5.100721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230323 Jy ! Component: 100 - total flux cleaned = 0.0270464 Jy ! Component: 150 - total flux cleaned = 0.0324892 Jy ! Component: 200 - total flux cleaned = 0.0373216 Jy ! Total flux subtracted in 200 components = 0.0373216 Jy ! Clean residual min=-0.092348 max=0.086638 Jy/beam ! Clean residual mean=-0.003699 rms=0.022648 Jy/beam ! Combined flux in latest and established models = 0.986417 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.986417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653779Jy sigma=5.038706 ! Fit after self-cal, rms=0.653402Jy sigma=5.035026 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653402Jy sigma=5.035026 ! Fit after self-cal, rms=0.653402Jy sigma=5.035026 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.892 mas, bmaj=9.267 mas, bpa=15.77 degrees ! Estimated noise=3.09002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089174 Jy ! Component: 100 - total flux cleaned = 0.00566358 Jy ! Component: 150 - total flux cleaned = 0.00425673 Jy ! Component: 200 - total flux cleaned = 0.00362559 Jy ! Total flux subtracted in 200 components = 0.00362559 Jy ! Clean residual min=-0.146398 max=0.157663 Jy/beam ! Clean residual mean=-0.011752 rms=0.048988 Jy/beam ! Combined flux in latest and established models = 0.990043 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.990043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.654800Jy sigma=5.011617 ! Fit after self-cal, rms=0.654577Jy sigma=5.007783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401933 Jy ! Component: 100 - total flux cleaned = 0.00404057 Jy ! Component: 150 - total flux cleaned = 0.00403428 Jy ! Component: 200 - total flux cleaned = 0.00403683 Jy ! Total flux subtracted in 200 components = 0.00403683 Jy ! Clean residual min=-0.148115 max=0.153232 Jy/beam ! Clean residual mean=-0.011939 rms=0.048481 Jy/beam ! Combined flux in latest and established models = 0.99408 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.99408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.655134Jy sigma=5.021791 ! Fit after self-cal, rms=0.655142Jy sigma=5.020062 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.567 x 3.723 at -13.67 degrees (North through East) ! Clean map min=-0.085395 max=0.66853 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.655142Jy sigma=5.020062 ! Fit after self-cal, rms=0.655142Jy sigma=5.020062 ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725986 Jy ! Component: 100 - total flux cleaned = 0.0154668 Jy ! Component: 150 - total flux cleaned = 0.0185963 Jy ! Component: 200 - total flux cleaned = 0.0200111 Jy ! Total flux subtracted in 200 components = 0.0200111 Jy ! Clean residual min=-0.088441 max=0.086978 Jy/beam ! Clean residual mean=-0.004114 rms=0.022236 Jy/beam ! Combined flux in latest and established models = 1.01409 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 1.01409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.651108Jy sigma=4.997675 ! Fit after self-cal, rms=0.651101Jy sigma=4.996571 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001376 Jy ! Component: 100 - total flux cleaned = 0.00263114 Jy ! Component: 150 - total flux cleaned = 0.00375537 Jy ! Component: 200 - total flux cleaned = 0.00429202 Jy ! Total flux subtracted in 200 components = 0.00429202 Jy ! Clean residual min=-0.087902 max=0.086954 Jy/beam ! Clean residual mean=-0.004167 rms=0.022123 Jy/beam ! Combined flux in latest and established models = 1.01838 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 1.01838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.650457Jy sigma=4.970612 ! Fit after self-cal, rms=0.650471Jy sigma=4.970028 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.650471Jy sigma=4.970028 ! Fit after self-cal, rms=0.650471Jy sigma=4.970028 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=3.377 mas, bpa=-16.33 degrees ! Estimated noise=2.60476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.508302 Jy ! Component: 100 - total flux cleaned = 0.683871 Jy ! Component: 150 - total flux cleaned = 0.792344 Jy ! Component: 200 - total flux cleaned = 0.838452 Jy ! Total flux subtracted in 200 components = 0.838452 Jy ! Clean residual min=-0.098926 max=0.099891 Jy/beam ! Clean residual mean=-0.000282 rms=0.021752 Jy/beam ! Combined flux in latest and established models = 0.838452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.838452 Jy ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-42.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0926238 Jy ! Component: 100 - total flux cleaned = 0.129272 Jy ! Component: 150 - total flux cleaned = 0.149368 Jy ! Component: 200 - total flux cleaned = 0.163205 Jy ! Total flux subtracted in 200 components = 0.163205 Jy ! Clean residual min=-0.095423 max=0.087602 Jy/beam ! Clean residual mean=-0.003977 rms=0.021967 Jy/beam ! Combined flux in latest and established models = 1.00166 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 50 components and 1.00166 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.892 mas, bmaj=9.267 mas, bpa=15.77 degrees ! Estimated noise=3.09002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0645854 Jy ! Component: 100 - total flux cleaned = 0.0788203 Jy ! Component: 150 - total flux cleaned = 0.0810634 Jy ! Component: 200 - total flux cleaned = 0.0850222 Jy ! Total flux subtracted in 200 components = 0.0850222 Jy ! Clean residual min=-0.177176 max=0.154478 Jy/beam ! Clean residual mean=-0.016473 rms=0.045796 Jy/beam ! Combined flux in latest and established models = 1.08668 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182009 Jy ! Component: 100 - total flux cleaned = 0.00266123 Jy ! Component: 150 - total flux cleaned = 0.00343539 Jy ! Component: 200 - total flux cleaned = 0.00414939 Jy ! Total flux subtracted in 200 components = 0.00414939 Jy ! Clean residual min=-0.176702 max=0.153425 Jy/beam ! Clean residual mean=-0.016674 rms=0.045535 Jy/beam ! Combined flux in latest and established models = 1.09083 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 1.09083 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=3.723 mas, bpa=-13.67 degrees ! Estimated noise=2.14833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0202218 Jy ! Component: 100 - total flux cleaned = -0.0203962 Jy ! Component: 150 - total flux cleaned = -0.019072 Jy ! Component: 200 - total flux cleaned = -0.0178576 Jy ! Total flux subtracted in 200 components = -0.0178576 Jy ! Clean residual min=-0.090175 max=0.085041 Jy/beam ! Clean residual mean=-0.005047 rms=0.021326 Jy/beam ! Combined flux in latest and established models = 1.07297 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 1.07297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653950Jy sigma=4.819048 ! Fit after self-cal, rms=0.650766Jy sigma=4.775010 wmodel /scr/pima/rv102_uvs/J0205+3212_S_map.mod ! Writing 77 model components to file: /scr/pima/rv102_uvs/J0205+3212_S_map.mod wobs /scr/pima/rv102_uvs/J0205+3212_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0205+3212_S_uvs.fits wwins /scr/pima/rv102_uvs/J0205+3212_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv102_uvs/J0205+3212_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0213538 Jy ! Component: 100 - total flux cleaned = -0.0376787 Jy ! Component: 150 - total flux cleaned = -0.0461601 Jy ! Component: 200 - total flux cleaned = -0.0529089 Jy ! Component: 250 - total flux cleaned = -0.059413 Jy ! Component: 300 - total flux cleaned = -0.0657197 Jy ! Component: 350 - total flux cleaned = -0.0718533 Jy ! Component: 400 - total flux cleaned = -0.0778019 Jy ! Component: 450 - total flux cleaned = -0.0836132 Jy ! Component: 500 - total flux cleaned = -0.0881381 Jy ! Component: 550 - total flux cleaned = -0.0914875 Jy ! Component: 600 - total flux cleaned = -0.0969461 Jy ! Component: 650 - total flux cleaned = -0.10123 Jy ! Component: 700 - total flux cleaned = -0.10647 Jy ! Component: 750 - total flux cleaned = -0.108544 Jy ! Component: 800 - total flux cleaned = -0.113584 Jy ! Component: 850 - total flux cleaned = -0.115556 Jy ! Component: 900 - total flux cleaned = -0.117511 Jy ! Component: 950 - total flux cleaned = -0.1204 Jy ! Component: 1000 - total flux cleaned = -0.125096 Jy ! Component: 1050 - total flux cleaned = -0.126936 Jy ! Component: 1100 - total flux cleaned = -0.130559 Jy ! Component: 1150 - total flux cleaned = -0.130553 Jy ! Component: 1200 - total flux cleaned = -0.133195 Jy ! Component: 1250 - total flux cleaned = -0.135795 Jy ! Component: 1300 - total flux cleaned = -0.137501 Jy ! Component: 1350 - total flux cleaned = -0.140018 Jy ! Component: 1400 - total flux cleaned = -0.141671 Jy ! Component: 1450 - total flux cleaned = -0.144113 Jy ! Component: 1500 - total flux cleaned = -0.146518 Jy ! Component: 1550 - total flux cleaned = -0.148891 Jy ! Component: 1600 - total flux cleaned = -0.151222 Jy ! Component: 1650 - total flux cleaned = -0.151213 Jy ! Component: 1700 - total flux cleaned = -0.152732 Jy ! Component: 1750 - total flux cleaned = -0.153486 Jy ! Component: 1800 - total flux cleaned = -0.15572 Jy ! Component: 1850 - total flux cleaned = -0.157179 Jy ! Component: 1900 - total flux cleaned = -0.157908 Jy ! Component: 1950 - total flux cleaned = -0.159341 Jy ! Component: 2000 - total flux cleaned = -0.160763 Jy ! Component: 2050 - total flux cleaned = -0.164273 Jy ! Component: 2100 - total flux cleaned = -0.164958 Jy ! Component: 2150 - total flux cleaned = -0.167013 Jy ! Component: 2200 - total flux cleaned = -0.167691 Jy ! Component: 2250 - total flux cleaned = -0.169038 Jy ! Component: 2300 - total flux cleaned = -0.173029 Jy ! Component: 2350 - total flux cleaned = -0.173678 Jy ! Component: 2400 - total flux cleaned = -0.174327 Jy ! Component: 2450 - total flux cleaned = -0.175623 Jy ! Component: 2500 - total flux cleaned = -0.175631 Jy ! Component: 2550 - total flux cleaned = -0.178168 Jy ! Component: 2600 - total flux cleaned = -0.1788 Jy ! Component: 2650 - total flux cleaned = -0.18129 Jy ! Component: 2700 - total flux cleaned = -0.180672 Jy ! Component: 2750 - total flux cleaned = -0.1819 Jy ! Component: 2800 - total flux cleaned = -0.183719 Jy ! Component: 2850 - total flux cleaned = -0.18492 Jy ! Component: 2900 - total flux cleaned = -0.185515 Jy ! Component: 2950 - total flux cleaned = -0.187287 Jy ! Component: 3000 - total flux cleaned = -0.189046 Jy ! Component: 3050 - total flux cleaned = -0.190207 Jy ! Component: 3100 - total flux cleaned = -0.192507 Jy ! Component: 3150 - total flux cleaned = -0.193077 Jy ! Component: 3200 - total flux cleaned = -0.194775 Jy ! Component: 3250 - total flux cleaned = -0.196458 Jy ! Component: 3300 - total flux cleaned = -0.197572 Jy ! Component: 3350 - total flux cleaned = -0.198129 Jy ! Component: 3400 - total flux cleaned = -0.199781 Jy ! Component: 3450 - total flux cleaned = -0.201419 Jy ! Component: 3500 - total flux cleaned = -0.202499 Jy ! Component: 3550 - total flux cleaned = -0.203573 Jy ! Component: 3600 - total flux cleaned = -0.205173 Jy ! Component: 3650 - total flux cleaned = -0.206232 Jy ! Component: 3700 - total flux cleaned = -0.207806 Jy ! Component: 3750 - total flux cleaned = -0.209368 Jy ! Component: 3800 - total flux cleaned = -0.209882 Jy ! Component: 3850 - total flux cleaned = -0.211934 Jy ! Component: 3900 - total flux cleaned = -0.211936 Jy ! Component: 3950 - total flux cleaned = -0.212953 Jy ! Component: 4000 - total flux cleaned = -0.215469 Jy ! Component: 4050 - total flux cleaned = -0.21597 Jy ! Total flux subtracted in 4096 components = -0.216468 Jy ! Clean residual min=-0.025634 max=0.029166 Jy/beam ! Clean residual mean=-0.001933 rms=0.008731 Jy/beam ! Combined flux in latest and established models = 0.856503 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 403 components and 0.856503 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv102_uvs/J0205+3212_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.567 x 3.723 at -13.67 degrees (North through East) ! Clean map min=-0.061905 max=0.70161 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0205+3212_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.701607 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00874039 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.73731 3.73731 7.47461 14.9492 29.8984 59.7969 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0262 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.701 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 80.271 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0205+3212_S_uvs.log closed on Sat Feb 27 22:22:48 2016