! Started logfile: /scr/pima/rv102_uvs/J0205+3212_S_dfm.log on Sat Nov 9 09:30:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rv102_uvs/J0205+3212_S_uva.fits ! Reading UV FITS file: /scr/pima/rv102_uvs/J0205+3212_S_uva.fits ! AN table 1: 25 integrations on 6 of 6 possible baselines. ! AN table 2: 2 integrations on 10 of 10 possible baselines. ! AN table 3: 2 integrations on 15 of 15 possible baselines. ! AN table 4: 2 integrations on 1 of 1 possible baselines. ! AN table 5: 2 integrations on 15 of 15 possible baselines. ! AN table 6: 2 integrations on 3 of 3 possible baselines. ! AN table 7: 2 integrations on 10 of 10 possible baselines. ! AN table 8: 2 integrations on 55 of 55 possible baselines. ! AN table 9: 4 integrations on 3 of 3 possible baselines. ! AN table 10: 4 integrations on 3 of 3 possible baselines. ! AN table 11: 2 integrations on 1 of 1 possible baselines. ! AN table 12: 2 integrations on 3 of 3 possible baselines. ! AN table 13: 4 integrations on 15 of 15 possible baselines. ! AN table 14: 2 integrations on 3 of 3 possible baselines. ! AN table 15: 4 integrations on 1 of 1 possible baselines. ! AN table 16: 2 integrations on 1 of 1 possible baselines. ! AN table 17: 2 integrations on 21 of 21 possible baselines. ! AN table 18: 4 integrations on 1 of 1 possible baselines. ! AN table 19: 2 integrations on 6 of 6 possible baselines. ! AN table 20: 2 integrations on 3 of 3 possible baselines. ! AN table 21: 2 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.998155 visibilities/baseline/integration-bin. ! Found source: J0205+3212 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 2164 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0205+3212_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 8 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! A total of 8 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 8 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! A total of 8 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 21. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 8 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! A total of 8 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 8 telescope corrections were flagged in sub-array 15. ! A total of 4 telescope corrections were flagged in sub-array 16. ! A total of 8 telescope corrections were flagged in sub-array 18. ! A total of 6 telescope corrections were flagged in sub-array 21. ! ! Fit before self-cal, rms=1.789799Jy sigma=14.489197 ! Fit after self-cal, rms=0.674952Jy sigma=3.850078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=3.215 mas, bpa=-13.63 degrees ! Estimated noise=2.8178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05182 Jy ! Component: 100 - total flux cleaned = 1.29213 Jy ! Total flux subtracted in 100 components = 1.29213 Jy ! Clean residual min=-0.059050 max=0.088906 Jy/beam ! Clean residual mean=0.000233 rms=0.012670 Jy/beam ! Combined flux in latest and established models = 1.29213 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.29213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.531300Jy sigma=2.613975 ! Fit after self-cal, rms=0.531282Jy sigma=2.613943 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912954 Jy ! Component: 100 - total flux cleaned = 0.132053 Jy ! Total flux subtracted in 100 components = 0.132053 Jy ! Clean residual min=-0.061355 max=0.067742 Jy/beam ! Clean residual mean=0.000144 rms=0.012417 Jy/beam ! Combined flux in latest and established models = 1.42419 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 1.42419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.501989Jy sigma=2.486647 ! Fit after self-cal, rms=0.501928Jy sigma=2.486382 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=3.622 mas, bpa=-11.94 degrees ! Estimated noise=2.32653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506957 Jy ! Component: 100 - total flux cleaned = 0.0599228 Jy ! Component: 150 - total flux cleaned = 0.0612235 Jy ! Component: 200 - total flux cleaned = 0.0612265 Jy ! Total flux subtracted in 200 components = 0.0612265 Jy ! Clean residual min=-0.049107 max=0.042140 Jy/beam ! Clean residual mean=0.002001 rms=0.008635 Jy/beam ! Combined flux in latest and established models = 1.48541 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 1.48541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.492355Jy sigma=2.344467 ! Fit after self-cal, rms=0.490819Jy sigma=2.330094 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.453 x 3.622 at -11.94 degrees (North through East) ! Clean map min=-0.043241 max=1.3523 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.80 NY 1.05 ON 1.02 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.96 MA 1.75 ON 1.01 SC 1.01 ! WZ 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.97 MA 1.57 NY 1.00 ON 1.10 ! WF 0.98 WZ 1.08 ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 0.89 NY 0.99 ON 0.95 SC 1.17 ! WF 1.03 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.65 NY 1.02 ON 0.94 WF 0.99 ! WZ 0.94 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.99 HN 0.94 KP 0.97 LA 1.01 ! MA 1.12 NY 1.01 ON 0.94 PT 1.03 ! SC 1.09 WF 1.06 WZ 1.02 ! ! A total of 12 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 1.00 MK 1.74 NL 1.05 NY 1.06 ! ON 1.07 WF 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.01 KP 1.03 LA 1.08 MK 0.60 ! NL 1.06 NY 1.07 PT 1.03 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! MK 0.75 NY 1.01 ON 1.04 WZ 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 20. ! Telescope amplitude corrections in sub-array 20: ! MK 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 21. ! Telescope amplitude corrections in sub-array 21: ! MA 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.96 MA 1.00* ON 1.03 SC 1.16 ! WZ 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.08 MA 1.00* NY 0.99 ON 1.00 ! WF 0.97 WZ 1.09 ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.05 ON 0.90 SC 0.97 ! WF 1.09 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MA 1.00* NY 0.99 ON 1.07 WF 0.96 ! WZ 1.03 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00 HN 0.94 KP 0.95 LA 0.99 ! MA 1.00* NY 0.96 ON 1.01 PT 1.00 ! SC 1.05 WF 1.03 WZ 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 0.96 MK 0.95 NL 1.08 NY 1.03 ! ON 1.12 WF 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.05 KP 1.02 LA 1.05 MK 0.86 ! NL 1.06 NY 1.05 PT 1.07 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! MK 1.07 NY 1.05 ON 0.97 WZ 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 20. ! Telescope amplitude corrections in sub-array 20: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MA 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.53 NY 1.05 ON 1.04 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.95 MA 0.54 ON 1.07 SC 1.13 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.02 MA 0.51 NY 1.05 ON 1.05 ! WF 0.95 WZ 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 0.52 NY 1.04 ON 1.00 SC 1.10 ! WF 1.01 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.47 NY 1.09 ON 0.96 WF 1.05 ! WZ 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00 HN 0.94 KP 1.00 LA 1.01 ! MA 0.46 NY 1.03 ON 0.96 PT 1.03 ! SC 1.04 WF 0.99 WZ 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 1.03 MK 1.09 NL 1.08 NY 1.07 ! ON 1.06 WF 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.06 KP 0.98 LA 1.06 MK 0.83 ! NL 1.04 NY 1.11 PT 1.05 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! MK 1.15 NY 1.01 ON 1.04 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 20. ! Telescope amplitude corrections in sub-array 20: ! MK 0.00* ON 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 21. ! Telescope amplitude corrections in sub-array 21: ! MA 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.09 MA 1.00* ON 1.04 SC 1.13 ! WZ 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.08 MA 1.00* NY 1.00 ON 1.15 ! WF 0.95 WZ 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.04 ON 1.08 SC 1.03 ! WF 1.05 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MA 1.00* NY 1.04 ON 0.95 WF 0.94 ! WZ 1.04 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.01 HN 0.97 KP 0.98 LA 1.01 ! MA 1.00* NY 1.02 ON 0.94 PT 1.03 ! SC 1.06 WF 0.99 WZ 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! WF 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HN 1.02 MK 1.97 NL 1.08 NY 1.07 ! ON 1.06 WF 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! FD 1.10 KP 0.97 LA 1.07 MK 0.56 ! NL 0.98 NY 1.15 PT 1.05 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! MK 0.76 NY 0.96 ON 1.14 WZ 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 20. ! Telescope amplitude corrections in sub-array 20: ! MK 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 21: ! MA 0.00* ON 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.490819Jy sigma=2.330094 ! Fit after self-cal, rms=0.251601Jy sigma=1.284789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=3.697 mas, bpa=-14.39 degrees ! Estimated noise=2.45341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235289 Jy ! Component: 100 - total flux cleaned = 0.0337602 Jy ! Component: 150 - total flux cleaned = 0.035515 Jy ! Component: 200 - total flux cleaned = 0.0366763 Jy ! Total flux subtracted in 200 components = 0.0366763 Jy ! Clean residual min=-0.014819 max=0.018908 Jy/beam ! Clean residual mean=0.000077 rms=0.003789 Jy/beam ! Combined flux in latest and established models = 1.52209 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 1.52209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248863Jy sigma=1.256464 ! Fit after self-cal, rms=0.248283Jy sigma=1.250430 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248283Jy sigma=1.250430 ! Fit after self-cal, rms=0.265904Jy sigma=1.086467 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=3.692 mas, bpa=-14.25 degrees ! Estimated noise=2.45622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102837 Jy ! Component: 100 - total flux cleaned = 0.0125378 Jy ! Component: 150 - total flux cleaned = 0.0129416 Jy ! Component: 200 - total flux cleaned = 0.0132765 Jy ! Total flux subtracted in 200 components = 0.0132765 Jy ! Clean residual min=-0.012065 max=0.014234 Jy/beam ! Clean residual mean=0.000273 rms=0.002844 Jy/beam ! Combined flux in latest and established models = 1.53537 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 1.53537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265347Jy sigma=1.078838 ! Fit after self-cal, rms=0.265589Jy sigma=1.077490 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142101 Jy ! Component: 100 - total flux cleaned = 0.0226586 Jy ! Component: 150 - total flux cleaned = 0.0268081 Jy ! Component: 200 - total flux cleaned = 0.0280499 Jy ! Total flux subtracted in 200 components = 0.0280499 Jy ! Clean residual min=-0.012109 max=0.010988 Jy/beam ! Clean residual mean=-0.000424 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 1.56342 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 84 components and 1.56342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265007Jy sigma=1.060594 ! Fit after self-cal, rms=0.264999Jy sigma=1.059770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264999Jy sigma=1.059770 ! Fit after self-cal, rms=0.263902Jy sigma=1.024252 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=3.69 mas, bpa=-14.17 degrees ! Estimated noise=2.45615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516814 Jy ! Component: 100 - total flux cleaned = 0.00857675 Jy ! Component: 150 - total flux cleaned = 0.0104779 Jy ! Component: 200 - total flux cleaned = 0.0116442 Jy ! Total flux subtracted in 200 components = 0.0116442 Jy ! Clean residual min=-0.010057 max=0.010488 Jy/beam ! Clean residual mean=-0.000082 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 1.57506 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 94 components and 1.57506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263649Jy sigma=1.018291 ! Fit after self-cal, rms=0.263639Jy sigma=1.017945 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56.5, 77). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541234 Jy ! Component: 100 - total flux cleaned = 0.0054835 Jy ! Component: 150 - total flux cleaned = 0.00513589 Jy ! Component: 200 - total flux cleaned = 0.00529745 Jy ! Total flux subtracted in 200 components = 0.00529745 Jy ! Clean residual min=-0.009524 max=0.009384 Jy/beam ! Clean residual mean=-0.000196 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 1.58036 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 1.58036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263078Jy sigma=1.010763 ! Fit after self-cal, rms=0.262938Jy sigma=1.010206 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262938Jy sigma=1.010206 ! Fit after self-cal, rms=0.262332Jy sigma=1.008492 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.222 mas, bmaj=9.332 mas, bpa=-6.319 degrees ! Estimated noise=3.95057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307329 Jy ! Component: 100 - total flux cleaned = 0.00515431 Jy ! Component: 150 - total flux cleaned = 0.00624603 Jy ! Component: 200 - total flux cleaned = 0.00697247 Jy ! Total flux subtracted in 200 components = 0.00697247 Jy ! Clean residual min=-0.011282 max=0.010566 Jy/beam ! Clean residual mean=-0.000477 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 1.58733 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 1.58733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262409Jy sigma=1.008272 ! Fit after self-cal, rms=0.262256Jy sigma=1.007560 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96567e-05 Jy ! Component: 100 - total flux cleaned = 0.000646905 Jy ! Component: 150 - total flux cleaned = 0.000889277 Jy ! Component: 200 - total flux cleaned = 0.000997103 Jy ! Total flux subtracted in 200 components = 0.000997103 Jy ! Clean residual min=-0.010900 max=0.010284 Jy/beam ! Clean residual mean=-0.000570 rms=0.003014 Jy/beam ! Combined flux in latest and established models = 1.58833 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 1.58833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262267Jy sigma=1.007762 ! Fit after self-cal, rms=0.262186Jy sigma=1.007544 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=3.688 mas, bpa=-14.14 degrees ! Estimated noise=2.4547 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.399 x 3.688 at -14.14 degrees (North through East) ! Clean map min=-0.013394 max=1.3462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262186Jy sigma=1.007544 ! Fit after self-cal, rms=0.372286Jy sigma=0.916521 ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=3.686 mas, bpa=-14.13 degrees ! Estimated noise=2.45328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000914297 Jy ! Component: 100 - total flux cleaned = 0.0012267 Jy ! Component: 150 - total flux cleaned = 0.00109199 Jy ! Component: 200 - total flux cleaned = 0.00109097 Jy ! Total flux subtracted in 200 components = 0.00109097 Jy ! Clean residual min=-0.008985 max=0.009393 Jy/beam ! Clean residual mean=-0.000046 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 1.58942 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 1.58942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372118Jy sigma=0.913850 ! Fit after self-cal, rms=0.372117Jy sigma=0.913653 ! Inverting map ! Added new window around map position (47, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510656 Jy ! Component: 100 - total flux cleaned = 0.00590334 Jy ! Component: 150 - total flux cleaned = 0.00559041 Jy ! Component: 200 - total flux cleaned = 0.00544514 Jy ! Total flux subtracted in 200 components = 0.00544514 Jy ! Clean residual min=-0.009350 max=0.008925 Jy/beam ! Clean residual mean=-0.000177 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 1.59486 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 168 components and 1.59486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371748Jy sigma=0.907702 ! Fit after self-cal, rms=0.371554Jy sigma=0.906857 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371554Jy sigma=0.906857 ! Fit after self-cal, rms=0.371412Jy sigma=0.905583 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.1 mas, bmaj=3.289 mas, bpa=-14.69 degrees ! Estimated noise=2.96158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0401 Jy ! Component: 100 - total flux cleaned = 1.26923 Jy ! Component: 150 - total flux cleaned = 1.35351 Jy ! Component: 200 - total flux cleaned = 1.40079 Jy ! Total flux subtracted in 200 components = 1.40079 Jy ! Clean residual min=-0.015061 max=0.024067 Jy/beam ! Clean residual mean=0.000183 rms=0.003758 Jy/beam ! Combined flux in latest and established models = 1.40079 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.40079 Jy ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=3.684 mas, bpa=-14.11 degrees ! Estimated noise=2.45257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467501 Jy ! Component: 100 - total flux cleaned = 0.0772295 Jy ! Component: 150 - total flux cleaned = 0.101002 Jy ! Component: 200 - total flux cleaned = 0.120355 Jy ! Total flux subtracted in 200 components = 0.120355 Jy ! Clean residual min=-0.009711 max=0.013801 Jy/beam ! Clean residual mean=0.001734 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 1.52115 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 1.52114 Jy ! Inverting map ! Added new window around map position (56, 66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164499 Jy ! Component: 100 - total flux cleaned = 0.0301514 Jy ! Component: 150 - total flux cleaned = 0.0400803 Jy ! Component: 200 - total flux cleaned = 0.0479526 Jy ! Total flux subtracted in 200 components = 0.0479526 Jy ! Clean residual min=-0.009686 max=0.010305 Jy/beam ! Clean residual mean=0.000579 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 1.5691 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 74 components and 1.5691 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.225 mas, bmaj=9.329 mas, bpa=-6.221 degrees ! Estimated noise=3.94991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154309 Jy ! Component: 100 - total flux cleaned = 0.0208012 Jy ! Component: 150 - total flux cleaned = 0.0244865 Jy ! Component: 200 - total flux cleaned = 0.027362 Jy ! Total flux subtracted in 200 components = 0.027362 Jy ! Clean residual min=-0.010949 max=0.011373 Jy/beam ! Clean residual mean=-0.000419 rms=0.003145 Jy/beam ! Combined flux in latest and established models = 1.59646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011424 Jy ! Component: 100 - total flux cleaned = 0.00212469 Jy ! Component: 150 - total flux cleaned = 0.00264149 Jy ! Component: 200 - total flux cleaned = 0.00310494 Jy ! Total flux subtracted in 200 components = 0.00310494 Jy ! Clean residual min=-0.010998 max=0.010846 Jy/beam ! Clean residual mean=-0.000700 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 1.59956 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 130 components and 1.59956 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=3.684 mas, bpa=-14.11 degrees ! Estimated noise=2.45257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0067047 Jy ! Component: 100 - total flux cleaned = -0.00615786 Jy ! Component: 150 - total flux cleaned = -0.00489611 Jy ! Component: 200 - total flux cleaned = -0.00444131 Jy ! Total flux subtracted in 200 components = -0.00444131 Jy ! Clean residual min=-0.008996 max=0.009017 Jy/beam ! Clean residual mean=-0.000084 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 1.59512 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 1.59512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372027Jy sigma=0.915875 ! Fit after self-cal, rms=0.371595Jy sigma=0.911689 wmodel J0205+3212_S_map.mod ! Writing 145 model components to file: J0205+3212_S_map.mod wobs J0205+3212_S_uvs.fits ! Writing UV FITS file: J0205+3212_S_uvs.fits wwins J0205+3212_S_map.win ! wwins: Wrote 6 windows to J0205+3212_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067442 Jy ! Component: 100 - total flux cleaned = 0.00163403 Jy ! Component: 150 - total flux cleaned = 0.00255181 Jy ! Component: 200 - total flux cleaned = 0.00269953 Jy ! Component: 250 - total flux cleaned = 0.00255416 Jy ! Component: 300 - total flux cleaned = 0.00241166 Jy ! Component: 350 - total flux cleaned = 0.00254962 Jy ! Component: 400 - total flux cleaned = 0.00241127 Jy ! Component: 450 - total flux cleaned = 0.00268091 Jy ! Component: 500 - total flux cleaned = 0.00281349 Jy ! Component: 550 - total flux cleaned = 0.00281259 Jy ! Component: 600 - total flux cleaned = 0.00307132 Jy ! Component: 650 - total flux cleaned = 0.00319935 Jy ! Component: 700 - total flux cleaned = 0.00345127 Jy ! Component: 750 - total flux cleaned = 0.00357618 Jy ! Component: 800 - total flux cleaned = 0.00369979 Jy ! Component: 850 - total flux cleaned = 0.00406607 Jy ! Component: 900 - total flux cleaned = 0.00406533 Jy ! Component: 950 - total flux cleaned = 0.00406494 Jy ! Component: 1000 - total flux cleaned = 0.00418463 Jy ! Component: 1050 - total flux cleaned = 0.0043009 Jy ! Component: 1100 - total flux cleaned = 0.00430138 Jy ! Component: 1150 - total flux cleaned = 0.00453266 Jy ! Component: 1200 - total flux cleaned = 0.00464698 Jy ! Component: 1250 - total flux cleaned = 0.00498835 Jy ! Component: 1300 - total flux cleaned = 0.00487557 Jy ! Component: 1350 - total flux cleaned = 0.00521224 Jy ! Component: 1400 - total flux cleaned = 0.0055456 Jy ! Component: 1450 - total flux cleaned = 0.0057662 Jy ! Component: 1500 - total flux cleaned = 0.006203 Jy ! Component: 1550 - total flux cleaned = 0.00631107 Jy ! Component: 1600 - total flux cleaned = 0.0065267 Jy ! Component: 1650 - total flux cleaned = 0.00673995 Jy ! Component: 1700 - total flux cleaned = 0.00684608 Jy ! Component: 1750 - total flux cleaned = 0.00716236 Jy ! Component: 1800 - total flux cleaned = 0.0073716 Jy ! Component: 1850 - total flux cleaned = 0.00737171 Jy ! Component: 1900 - total flux cleaned = 0.00768228 Jy ! Component: 1950 - total flux cleaned = 0.00768248 Jy ! Component: 2000 - total flux cleaned = 0.00798915 Jy ! Component: 2050 - total flux cleaned = 0.00788777 Jy ! Component: 2100 - total flux cleaned = 0.00839274 Jy ! Component: 2150 - total flux cleaned = 0.00839258 Jy ! Component: 2200 - total flux cleaned = 0.00879109 Jy ! Component: 2250 - total flux cleaned = 0.00898881 Jy ! Component: 2300 - total flux cleaned = 0.00908756 Jy ! Component: 2350 - total flux cleaned = 0.00938111 Jy ! Component: 2400 - total flux cleaned = 0.0093809 Jy ! Component: 2450 - total flux cleaned = 0.00957462 Jy ! Component: 2500 - total flux cleaned = 0.00986414 Jy ! Component: 2550 - total flux cleaned = 0.00995997 Jy ! Component: 2600 - total flux cleaned = 0.0102462 Jy ! Component: 2650 - total flux cleaned = 0.010436 Jy ! Component: 2700 - total flux cleaned = 0.0104365 Jy ! Component: 2750 - total flux cleaned = 0.0108122 Jy ! Component: 2800 - total flux cleaned = 0.0110922 Jy ! Component: 2850 - total flux cleaned = 0.0109995 Jy ! Component: 2900 - total flux cleaned = 0.0113693 Jy ! Component: 2950 - total flux cleaned = 0.0115536 Jy ! Component: 3000 - total flux cleaned = 0.0117367 Jy ! Component: 3050 - total flux cleaned = 0.0119191 Jy ! Component: 3100 - total flux cleaned = 0.0121007 Jy ! Component: 3150 - total flux cleaned = 0.0124621 Jy ! Component: 3200 - total flux cleaned = 0.0125519 Jy ! Component: 3250 - total flux cleaned = 0.0125524 Jy ! Component: 3300 - total flux cleaned = 0.0128201 Jy ! Component: 3350 - total flux cleaned = 0.0130864 Jy ! Component: 3400 - total flux cleaned = 0.0134401 Jy ! Component: 3450 - total flux cleaned = 0.0134395 Jy ! Component: 3500 - total flux cleaned = 0.0137022 Jy ! Component: 3550 - total flux cleaned = 0.0137896 Jy ! Component: 3600 - total flux cleaned = 0.0140498 Jy ! Component: 3650 - total flux cleaned = 0.0143093 Jy ! Component: 3700 - total flux cleaned = 0.0145672 Jy ! Component: 3750 - total flux cleaned = 0.0144811 Jy ! Component: 3800 - total flux cleaned = 0.0146518 Jy ! Component: 3850 - total flux cleaned = 0.0147366 Jy ! Component: 3900 - total flux cleaned = 0.0149905 Jy ! Component: 3950 - total flux cleaned = 0.0149906 Jy ! Component: 4000 - total flux cleaned = 0.0153264 Jy ! Component: 4050 - total flux cleaned = 0.015243 Jy ! Total flux subtracted in 4096 components = 0.0154097 Jy ! Clean residual min=-0.004574 max=0.005425 Jy/beam ! Clean residual mean=-0.000028 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 1.61053 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 456 components and 1.61053 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv102_uvs/J0205+3212_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.398 x 3.684 at -14.11 degrees (North through East) ! Clean map min=-0.010174 max=1.3408 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0205+3212_S_map.fits wmodel /scr/pima/rv102_uvs/J0205+3212_S_map.mod ! Writing 456 model components to file: /scr/pima/rv102_uvs/J0205+3212_S_map.mod wobs /scr/pima/rv102_uvs/J0205+3212_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv102_uvs/J0205+3212_S_uvs.fits wwins /scr/pima/rv102_uvs/J0205+3212_S_map.win ! wwins: Wrote 7 windows to /scr/pima/rv102_uvs/J0205+3212_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.34076 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00142118 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.317993 0.317993 0.635986 1.27197 2.54395 5.08789 10.1758 20.3516 40.7031 81.4063 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.34 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 943.416 quit ! Quitting program ! Log file /scr/pima/rv102_uvs/J0205+3212_S_dfm.log closed on Sat Nov 9 09:30:53 2019