! Started logfile: /scr/pima/rv102_uvs/J0127+7323_X_uvs.log on Sat Feb 27 22:23:01 2016
obs /scr/pima/rv102_uvs/J0127+7323_X_uva.fits
! Reading UV FITS file: /scr/pima/rv102_uvs/J0127+7323_X_uva.fits
! AN table 1: 174 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.743135 visibilities/baseline/integration-bin.
! Found source: J0127+7323
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 18620 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv102_uvs/J0127+7323_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008290Jy  sigma=19.483868
! Fit after  self-cal, rms=0.940696Jy  sigma=18.186055
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.668 mas, bmaj=1.18 mas, bpa=-57.65 degrees
! Estimated noise=0.596435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466928 Jy
! Component: 100  -  total flux cleaned = 0.0572493 Jy
! Total flux subtracted in 100 components = 0.0572493 Jy
! Clean residual min=-0.005898 max=0.006341 Jy/beam
! Clean residual mean=0.000009 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.0572493 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0572493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103713Jy  sigma=1.863003
! Fit after  self-cal, rms=0.102093Jy  sigma=1.831715
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=1.533 mas, bpa=-56.11 degrees
! Estimated noise=0.276562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982947 Jy
! Component: 100  -  total flux cleaned = 0.0142421 Jy
! Component: 150  -  total flux cleaned = 0.0165968 Jy
! Component: 200  -  total flux cleaned = 0.0179105 Jy
! Total flux subtracted in 200 components = 0.0179105 Jy
! Clean residual min=-0.004897 max=0.007694 Jy/beam
! Clean residual mean=0.000028 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.0751598 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0751598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101191Jy  sigma=1.814896
! Fit after  self-cal, rms=0.101174Jy  sigma=1.812362
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8879 x 1.533 at -56.11 degrees (North through East)
! Clean map  min=-0.0043972  max=0.065674 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.101174Jy  sigma=1.812362
! Fit after  self-cal, rms=0.101174Jy  sigma=1.812362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=1.533 mas, bpa=-56.11 degrees
! Estimated noise=0.276562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197634 Jy
! Component: 100  -  total flux cleaned = 0.00289683 Jy
! Component: 150  -  total flux cleaned = 0.00299736 Jy
! Component: 200  -  total flux cleaned = 0.0030201 Jy
! Total flux subtracted in 200 components = 0.0030201 Jy
! Clean residual min=-0.004728 max=0.007736 Jy/beam
! Clean residual mean=0.000027 rms=0.001659 Jy/beam
! Combined flux in latest and established models = 0.0781799 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.0781799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101131Jy  sigma=1.811701
! Fit after  self-cal, rms=0.101134Jy  sigma=1.811378
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101134Jy  sigma=1.811378
! Fit after  self-cal, rms=0.099705Jy  sigma=1.810629
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=1.525 mas, bpa=-56.66 degrees
! Estimated noise=0.274636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000376265 Jy
! Component: 100  -  total flux cleaned = 0.000463917 Jy
! Component: 150  -  total flux cleaned = 0.000516421 Jy
! Component: 200  -  total flux cleaned = 0.000541188 Jy
! Total flux subtracted in 200 components = 0.000541188 Jy
! Clean residual min=-0.004621 max=0.007618 Jy/beam
! Clean residual mean=0.000025 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.0787211 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 0.0787211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099692Jy  sigma=1.810297
! Fit after  self-cal, rms=0.099680Jy  sigma=1.809918
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22, -27.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00758251 Jy
! Component: 100  -  total flux cleaned = 0.0119144 Jy
! Component: 150  -  total flux cleaned = 0.0147595 Jy
! Component: 200  -  total flux cleaned = 0.0164486 Jy
! Total flux subtracted in 200 components = 0.0164486 Jy
! Clean residual min=-0.004158 max=0.005706 Jy/beam
! Clean residual mean=0.000019 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 0.0951697 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 54 components and 0.0951697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099132Jy  sigma=1.796236
! Fit after  self-cal, rms=0.098811Jy  sigma=1.790861
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098811Jy  sigma=1.790861
! Fit after  self-cal, rms=0.098538Jy  sigma=1.790731
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8862 mas, bmaj=1.523 mas, bpa=-56.82 degrees
! Estimated noise=0.274069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454729 Jy
! Component: 100  -  total flux cleaned = 0.00712662 Jy
! Component: 150  -  total flux cleaned = 0.00819534 Jy
! Component: 200  -  total flux cleaned = 0.0087936 Jy
! Total flux subtracted in 200 components = 0.0087936 Jy
! Clean residual min=-0.003781 max=0.004702 Jy/beam
! Clean residual mean=0.000018 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.103963 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 66 components and 0.103963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098328Jy  sigma=1.785483
! Fit after  self-cal, rms=0.098195Jy  sigma=1.783427
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452685 Jy
! Component: 100  -  total flux cleaned = 0.00741802 Jy
! Component: 150  -  total flux cleaned = 0.00949302 Jy
! Component: 200  -  total flux cleaned = 0.0105344 Jy
! Total flux subtracted in 200 components = 0.0105344 Jy
! Clean residual min=-0.003355 max=0.003902 Jy/beam
! Clean residual mean=0.000013 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.114498 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 90 components and 0.114498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097969Jy  sigma=1.777584
! Fit after  self-cal, rms=0.097859Jy  sigma=1.775738
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097859Jy  sigma=1.775738
! Fit after  self-cal, rms=0.097065Jy  sigma=1.774121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=3.412 mas, bpa=-61.02 degrees
! Estimated noise=0.351623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032293 Jy
! Component: 100  -  total flux cleaned = 0.00438714 Jy
! Component: 150  -  total flux cleaned = 0.00521017 Jy
! Component: 200  -  total flux cleaned = 0.00547653 Jy
! Total flux subtracted in 200 components = 0.00547653 Jy
! Clean residual min=-0.004055 max=0.005309 Jy/beam
! Clean residual mean=0.000015 rms=0.001379 Jy/beam
! Combined flux in latest and established models = 0.119974 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.119974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097027Jy  sigma=1.772243
! Fit after  self-cal, rms=0.096959Jy  sigma=1.770218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203427 Jy
! Component: 100  -  total flux cleaned = 0.00263023 Jy
! Component: 150  -  total flux cleaned = 0.0027754 Jy
! Component: 200  -  total flux cleaned = 0.00277395 Jy
! Total flux subtracted in 200 components = 0.00277395 Jy
! Clean residual min=-0.003984 max=0.004881 Jy/beam
! Clean residual mean=0.000015 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.122748 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 116 components and 0.122748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096938Jy  sigma=1.769408
! Fit after  self-cal, rms=0.096909Jy  sigma=1.768941
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=1.519 mas, bpa=-57.05 degrees
! Estimated noise=0.272865 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8865 x 1.519 at -57.05 degrees (North through East)
! Clean map  min=-0.0025769  max=0.062295 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6677 mas, bmaj=1.171 mas, bpa=-58.7 degrees
! Estimated noise=0.585648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463854 Jy
! Component: 100  -  total flux cleaned = 0.0583737 Jy
! Component: 150  -  total flux cleaned = 0.066175 Jy
! Component: 200  -  total flux cleaned = 0.0724611 Jy
! Total flux subtracted in 200 components = 0.0724611 Jy
! Clean residual min=-0.005046 max=0.006409 Jy/beam
! Clean residual mean=0.000008 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 0.072461 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.072461 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=1.519 mas, bpa=-57.05 degrees
! Estimated noise=0.272865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110119 Jy
! Component: 100  -  total flux cleaned = 0.0186577 Jy
! Component: 150  -  total flux cleaned = 0.024702 Jy
! Component: 200  -  total flux cleaned = 0.0295704 Jy
! Total flux subtracted in 200 components = 0.0295704 Jy
! Clean residual min=-0.003618 max=0.005149 Jy/beam
! Clean residual mean=0.000018 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.102031 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 55 components and 0.102031 Jy
! Inverting map 
! Added new window around map position (-3.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00491248 Jy
! Component: 100  -  total flux cleaned = 0.00835383 Jy
! Component: 150  -  total flux cleaned = 0.011206 Jy
! Component: 200  -  total flux cleaned = 0.0134144 Jy
! Total flux subtracted in 200 components = 0.0134144 Jy
! Clean residual min=-0.003249 max=0.003904 Jy/beam
! Clean residual mean=0.000011 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.115446 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 77 components and 0.115446 Jy
! Inverting map 
! Added new window around map position (3.2, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354763 Jy
! Component: 100  -  total flux cleaned = 0.00580966 Jy
! Component: 150  -  total flux cleaned = 0.00777887 Jy
! Component: 200  -  total flux cleaned = 0.00918298 Jy
! Total flux subtracted in 200 components = 0.00918298 Jy
! Clean residual min=-0.002825 max=0.002727 Jy/beam
! Clean residual mean=0.000007 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.124629 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 98 components and 0.124629 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=3.412 mas, bpa=-61.02 degrees
! Estimated noise=0.351623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274764 Jy
! Component: 100  -  total flux cleaned = 0.00470522 Jy
! Component: 150  -  total flux cleaned = 0.0062404 Jy
! Component: 200  -  total flux cleaned = 0.00715249 Jy
! Total flux subtracted in 200 components = 0.00715249 Jy
! Clean residual min=-0.003342 max=0.003997 Jy/beam
! Clean residual mean=0.000009 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.131781 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000605188 Jy
! Component: 100  -  total flux cleaned = 0.000949802 Jy
! Component: 150  -  total flux cleaned = 0.00115968 Jy
! Component: 200  -  total flux cleaned = 0.00138391 Jy
! Total flux subtracted in 200 components = 0.00138391 Jy
! Clean residual min=-0.003293 max=0.003913 Jy/beam
! Clean residual mean=0.000007 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.133165 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 130 components and 0.133165 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=1.519 mas, bpa=-57.05 degrees
! Estimated noise=0.272865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.40957e-06 Jy
! Component: 100  -  total flux cleaned = 0.000194846 Jy
! Component: 150  -  total flux cleaned = 0.000408333 Jy
! Component: 200  -  total flux cleaned = 0.000562863 Jy
! Total flux subtracted in 200 components = 0.000562863 Jy
! Clean residual min=-0.002412 max=0.002676 Jy/beam
! Clean residual mean=0.000003 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.133728 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 142 components and 0.133728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096656Jy  sigma=1.763590
! Fit after  self-cal, rms=0.096435Jy  sigma=1.760981
wmodel /scr/pima/rv102_uvs/J0127+7323_X_map.mod
! Writing 142 model components to file: /scr/pima/rv102_uvs/J0127+7323_X_map.mod
wobs /scr/pima/rv102_uvs/J0127+7323_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv102_uvs/J0127+7323_X_uvs.fits
wwins /scr/pima/rv102_uvs/J0127+7323_X_map.win
! wwins: Wrote 5 windows to /scr/pima/rv102_uvs/J0127+7323_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125414 Jy
! Component: 100  -  total flux cleaned = 0.0019992 Jy
! Component: 150  -  total flux cleaned = 0.00212192 Jy
! Component: 200  -  total flux cleaned = 0.00212168 Jy
! Component: 250  -  total flux cleaned = 0.00212078 Jy
! Component: 300  -  total flux cleaned = 0.00197546 Jy
! Component: 350  -  total flux cleaned = 0.00194001 Jy
! Component: 400  -  total flux cleaned = 0.00200851 Jy
! Component: 450  -  total flux cleaned = 0.00204125 Jy
! Component: 500  -  total flux cleaned = 0.0021387 Jy
! Component: 550  -  total flux cleaned = 0.00210512 Jy
! Component: 600  -  total flux cleaned = 0.0020427 Jy
! Component: 650  -  total flux cleaned = 0.0020731 Jy
! Component: 700  -  total flux cleaned = 0.00192316 Jy
! Component: 750  -  total flux cleaned = 0.0017764 Jy
! Component: 800  -  total flux cleaned = 0.00177654 Jy
! Component: 850  -  total flux cleaned = 0.00152085 Jy
! Component: 900  -  total flux cleaned = 0.00149317 Jy
! Component: 950  -  total flux cleaned = 0.00138289 Jy
! Component: 1000  -  total flux cleaned = 0.00138286 Jy
! Component: 1050  -  total flux cleaned = 0.00122287 Jy
! Component: 1100  -  total flux cleaned = 0.00124925 Jy
! Component: 1150  -  total flux cleaned = 0.00124878 Jy
! Component: 1200  -  total flux cleaned = 0.00112056 Jy
! Component: 1250  -  total flux cleaned = 0.00112077 Jy
! Component: 1300  -  total flux cleaned = 0.00109562 Jy
! Component: 1350  -  total flux cleaned = 0.00109515 Jy
! Component: 1400  -  total flux cleaned = 0.000997793 Jy
! Component: 1450  -  total flux cleaned = 0.000925637 Jy
! Component: 1500  -  total flux cleaned = 0.000949645 Jy
! Component: 1550  -  total flux cleaned = 0.000902564 Jy
! Component: 1600  -  total flux cleaned = 0.000833086 Jy
! Component: 1650  -  total flux cleaned = 0.000855485 Jy
! Component: 1700  -  total flux cleaned = 0.000742366 Jy
! Component: 1750  -  total flux cleaned = 0.000697573 Jy
! Component: 1800  -  total flux cleaned = 0.000719767 Jy
! Component: 1850  -  total flux cleaned = 0.000631843 Jy
! Component: 1900  -  total flux cleaned = 0.000545009 Jy
! Component: 1950  -  total flux cleaned = 0.000588278 Jy
! Component: 2000  -  total flux cleaned = 0.000524098 Jy
! Component: 2050  -  total flux cleaned = 0.000502831 Jy
! Component: 2100  -  total flux cleaned = 0.000461274 Jy
! Component: 2150  -  total flux cleaned = 0.000461314 Jy
! Component: 2200  -  total flux cleaned = 0.000461598 Jy
! Component: 2250  -  total flux cleaned = 0.000461673 Jy
! Component: 2300  -  total flux cleaned = 0.000421669 Jy
! Component: 2350  -  total flux cleaned = 0.000442003 Jy
! Component: 2400  -  total flux cleaned = 0.000422283 Jy
! Component: 2450  -  total flux cleaned = 0.000383116 Jy
! Component: 2500  -  total flux cleaned = 0.00028589 Jy
! Component: 2550  -  total flux cleaned = 0.0002859 Jy
! Component: 2600  -  total flux cleaned = 0.000305073 Jy
! Component: 2650  -  total flux cleaned = 0.000248111 Jy
! Component: 2700  -  total flux cleaned = 0.000172648 Jy
! Component: 2750  -  total flux cleaned = 7.8986e-05 Jy
! Component: 2800  -  total flux cleaned = 6.04181e-05 Jy
! Component: 2850  -  total flux cleaned = 4.175e-05 Jy
! Component: 2900  -  total flux cleaned = 6.00469e-05 Jy
! Component: 2950  -  total flux cleaned = -4.8734e-05 Jy
! Component: 3000  -  total flux cleaned = -4.87646e-05 Jy
! Component: 3050  -  total flux cleaned = 4.91601e-06 Jy
! Component: 3100  -  total flux cleaned = -0.000155163 Jy
! Component: 3150  -  total flux cleaned = -0.000190443 Jy
! Component: 3200  -  total flux cleaned = -0.000225471 Jy
! Component: 3250  -  total flux cleaned = -0.00022552 Jy
! Component: 3300  -  total flux cleaned = -0.000242697 Jy
! Component: 3350  -  total flux cleaned = -0.000242612 Jy
! Component: 3400  -  total flux cleaned = -0.000276788 Jy
! Component: 3450  -  total flux cleaned = -0.000293958 Jy
! Component: 3500  -  total flux cleaned = -0.000310973 Jy
! Component: 3550  -  total flux cleaned = -0.000361206 Jy
! Component: 3600  -  total flux cleaned = -0.000394496 Jy
! Component: 3650  -  total flux cleaned = -0.000411123 Jy
! Component: 3700  -  total flux cleaned = -0.000394589 Jy
! Component: 3750  -  total flux cleaned = -0.000460086 Jy
! Component: 3800  -  total flux cleaned = -0.00044372 Jy
! Component: 3850  -  total flux cleaned = -0.000427481 Jy
! Component: 3900  -  total flux cleaned = -0.000491889 Jy
! Component: 3950  -  total flux cleaned = -0.000523737 Jy
! Component: 4000  -  total flux cleaned = -0.000460006 Jy
! Component: 4050  -  total flux cleaned = -0.000507618 Jy
! Total flux subtracted in 4096 components = -0.000507651 Jy
! Clean residual min=-0.001015 max=0.000858 Jy/beam
! Clean residual mean=0.000002 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.13322 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 448 components and 0.13322 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv102_uvs/J0127+7323_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8865 x 1.519 at -57.05 degrees (North through East)
! Clean map  min=-0.001608  max=0.061976 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv102_uvs/J0127+7323_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0619756 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000266295 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.28903 1.28903 2.57806 5.15611 10.3122 20.6245 41.2489 82.4978
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  232.733 
quit
! Quitting program
! Log file /scr/pima/rv102_uvs/J0127+7323_X_uvs.log closed on Sat Feb 27 22:23:07 2016